Works kind of like the ext4 setting, to panic or remount read only on
errors.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

The old asynchronous discard code was really a relic from when all the
allocation code was asynchronous - now that allocation runs out of a
dedicated thread there's no point in keeping around all that complicated
machinery.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

bch_keybuf_del() takes a spinlock that can't be taken in interrupt context -
whoops. Fortunately, this code isn't enabled by default (you have to toggle a
sysfs thing).
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Dirty data accounting wasn't quite right - firstly, we were adding the key we're
inserting after it could have merged with another dirty key already in the
btree, and secondly we could sometimes pass the wrong offset to
bcache_dev_sectors_dirty_add() for dirty data we were overwriting - which is
important when tracking dirty data by stripe.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.10

The options have to be passed space-separated and prefixed by "floppy=",
rather than separately and unprefixed.

This fixes <http://bugs.debian.org/726655>.
Signed-off-by: NBen Harris <bjh21@cam.ac.uk>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

My static checker complains correctly that this is potential NULL
dereference because debugfs functions return NULL on error.  They return
an ERR_PTR if they are configured out.

We don't need to check for ERR_PTR because if debugfs is stubbed out the
dummy functions won't complain about that.  We don't need to check the
values before calling debugfs_remove() because that accepts ERR_PTRs and
NULL pointers.

We don't need to set pkt->dfs_f_info to NULL in pkt_debugfs_dev_new()
because it was initialized with kzalloc() so I have removed that.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

When persistent grants were added they were always used, even if the
backend doesn't have this feature (there's no harm in always using the
same set of pages). This restores the old data path when the backend
doesn't have persistent grants, removing the burden of doing a memcpy
when it is not actually needed.
Signed-off-by: NRoger Pau Monné <roger.pau@citrix.com>
Reported-by: NFelipe Franciosi <felipe.franciosi@citrix.com>
Cc: Felipe Franciosi <felipe.franciosi@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v2: Fix up whitespace issues]

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Reorder placement of skd_construct(), skd_cons_sg_list(), skd_destruct()
and skd_free_sg_list() functions. Then remove no longer needed function
prototypes.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

skdev->pdev and skdev->pdev->bus are always different than NULL in
skd_do_inq_page_da() so simplify the code accordingly.

Also cache skdev->pdev value in pdev variable while at it.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

SKD_OMIT_FROM_SRC_DIST is never defined.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

skdev->pdev is set to pdev twice in skd_pci_probe(), first time
through skd_construct() call and the second time directly in
the function. Remove the second assignment as it is not needed.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Use <asm/unaligned.h> instead of <asm-generic/unaligned.h>.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This is not a SCSI host driver so remove SCSI subsystem specific
includes.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Register block device in skd_pci_probe() instead of in skd_init() so it
is registered only if some devices are present (currently it is always
registered when the driver is loaded). Please note that this change
depends on the fact that register_blkdev(0, ...) never returns 0.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

* change priority level from KERN_INFO to KERN_ERR
* add "skd: " prefix
* do minor CodingStyle fixes

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

register_blkdev() is called before pci_register_driver() in skd_init()
so unregister_blkdev() should be called after pci_unregister_driver()
in skd_exit(). Fix it.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove skd_flush_cmd structure and skd_flush_slab.
Remove skd_end_request wrapper around skd_end_request_blk.
Remove skd_requeue_request, use blk_requeue_request directly.
Cleanup some comments (remove "bio" info) and whitespace.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Just call the block functions directly, don't wrap them
in skd helpers. With only one queueing model enabled, there's
no point in doing that.

Also kill the ->start_time and ->bio from the skd_request_context,
we don't use those anymore.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The skd driver has a selectable rq or bio based queueing model.
For 3.14, we want to turn this into a single blk-mq interface
instead. With the immutable biovecs being merged in 3.13, the
bio model would need patches to even work. So rip it out, with
a conversion pending for blk-mq in the next release.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Fix to return -ENOMEM in the skd construct error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

"elevator: Fix a race in elevator switching and md device initialization"
changed the semantics of elevator_init() in a way that now enforces to hold
the corresponding request queue's sysfs_lock when calling elevator_init()
to fix a race.
The patch did not convert the s390 dasd device driver which is the only
device driver which also calls elevator_init(). So add the missing locking.

Cc: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

A return value of 1 is interpreted as an error
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Replaced DPRINTK() and VPRINTK() with pr_debug().
Signed-off-by: NRamprasad C <ramprasad.chinthekindi@hgst.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch fixes checkpatch.pl errors for assignment in if condition.
It also removes unused readq / readl function calls.

As Andrew had disabled the compilation of drivers for 32 bit,
I have modified format specifiers in few VPRINTKs to avoid warnings
during 64 bit compilation.
Signed-off-by: NAkhil Bhansali <abhansali@stec-inc.com>
Reviewed-by: NRamprasad Chinthekindi <rchinthekindi@stec-inc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch fixes a possible Kernel Panic on driver load if
the configuration on the card is messed up or not yet set.
The driver could possible give a 32 bit unsigned all Fs to
the kernel as the device's block size.

Now we only write the block size to the kernel if the
configuration from the card is valid.

Also, driver version is being updated.
Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch fixes a bug in which discards were always
calling pci_unmap_page. Discards should never call the
pci_unmap_page function call because they are never mapped.

This caused a race condition on PowerPC systems when issuing
discards, writes, and reads all at the same time. The
pci_map_page function would eventually map logical address
0 for a read or write. Discards are always assigned a DMA
address of 0 because they are never mapped. So if
pci_map_page mapped address 0 for a DMA and a discard was
"unmapped" then the address would be freed and would cause
an EEH event to occur when Hardware accesses the address.

This was injected/uncovered in commit:
b347f9cf0bc8d42ee95ba1d3837fd93045ab336b

The pci_dma_mapping_error function declares -1 a DMA_ERROR
not 0 like initially thought So before we would never unmap
discards because they were considered NULL.

This patch should fall on top of commit id:
fc1967bb08a6184ed44ef990e1dd4389901b809c

Also, the driver version is being up dated.
Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

For a long time, the receiving side has spread "too large" incoming
requests over multiple bios.  No need to shrink our max_bio_size
(max_hw_sectors) if the peer is reconfigured to use a different storage.

The problem manifests itself if we are not the top of the device stack
(DRBD is used a LVM PV).

A hardware reconfiguration on the peer may cause the supported
max_bio_size to shrink, and the connection handshake would now
unnecessarily shrink the max_bio_size on the active node.

There is no way to notify upper layers that they have to "re-stack"
their limits. So they won't notice at all, and may keep submitting bios
that are suddenly considered "too large for device".

We already check for compatibility and ignore changes on the peer,
the code only was masked out unless we have a fully established connection.
We just need to allow it a bit earlier during the handshake.

Also consider max_hw_sectors in our merge bvec function, just in case.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Symptoms: disconnect after bitmap exchange due to
bitmap overflow (e:49731075554) while decoding bm RLE packet

In the decoding step of the variable length integer run length encoding
there was potentially an uncatched bitshift by wordsize (variable >> 64).

The result of which is "undefined" :(
(only "sometimes" the result is the desired 0)

Fix: don't do any bit shift magic for shift == 64, just assign.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Online adding of new minors with freshly created meta data
to an resource with an established connection failed, with a
wrong state transition on one side on one side of the new minor.

Freshly created meta-data has a la_size (last agreed size) of 0.
When we online add such devices, the code wrongly got into
the code path for resyncing new storage that was added while
the disk was detached.

Fixed that by making the GREW from ZERO a special case.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Since drbd-8.4.0 it is possible to change the allow-two-primaries
network option while the connection is established.

The sequence code used to partially order packets from the
data socket with packets from the meta-data socket, still assued
that the allow-two-primaries option is constant while the
connection is established.

I.e.
On a node that has the RESOLVE_CONFLICTS bits set, after enabling
allow-two-primaries, when receiving the next data packet it timed out
while waiting for the necessary packets on the data socket to arrive
(wait_for_and_update_peer_seq() function).

Fixed that by always tracking the sequence number, but only waiting
for it if allow-two-primaries is set.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If we want to iterate over the (as of yet still empty) list in the
cleanup path, we need to initialize the list before the first goto fail.
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Mike writes:

"cpqarray hasn't been used in over 12 years. It's doubtful that anyone
 still uses the board. It's time the driver was removed from the mainline
 kernel.  The only updates these days are minor and mostly done by people
 outside of HP."

If nobody yells, we'll remove it from the kernel tree completely
for 3.15.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Signed-off-by: NAkhil Bhansali <abhansali@stec-inc.com>
Signed-off-by: NRamprasad Chinthekindi <rchinthekindi@stec-inc.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>

Folded patch, contributions to clean up this driver from:

Jens Axboe
Dan Carpenter
Andrew Morton
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This fixes a kernel panic injected by commit id
8d26750143341831bc312f61c5ed141eeb75b8d0 where discards
are getting mapped through the pci_map_page function call.

The driver will now start verifying that a dma is not a
discard before issuing a the pci_map_page function call.

Also, we are updating the driver version.
Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Dynamically allocate buf to prevent warnings:

drivers/block/mtip32xx/mtip32xx.c: In function ‘mtip_hw_read_device_status’:
drivers/block/mtip32xx/mtip32xx.c:2823: warning: the frame size of 1056 bytes is larger than 1024 bytes
drivers/block/mtip32xx/mtip32xx.c: In function ‘mtip_hw_read_registers’:
drivers/block/mtip32xx/mtip32xx.c:2894: warning: the frame size of 1056 bytes is larger than 1024 bytes
drivers/block/mtip32xx/mtip32xx.c: In function ‘mtip_hw_read_flags’:
drivers/block/mtip32xx/mtip32xx.c:2917: warning: the frame size of 1056 bytes is larger than 1024 bytes
Signed-off-by: NDavid Milburn <dmilburn@redhat.com>
Acked-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch add support for SRSI(Surprise Removal Surprise Insertion).

Approach:
---------
Surprise Removal:
-----------------
On surprise removal of the device, gendisk, request queue, device index, sysfs
entries, etc are retained as long as device is in use - mounted filesystem,
device opened by an application, etc. The service thread breaks out of the main
while loop, waits for pci remove to exit, and then waits for device to become
free. When there no holders of the device, service thread cleans up the block
and device related stuff and returns.

Surprise Insertion:
-------------------
No change, this scenario follows the normal pci probe() function flow.
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The pci_map_page function has been moved into our
issued workqueue to prevent an us running out of
mappable addresses on non-HWWD PCIe x8 slots. The
maximum amount that can possible be mapped at one
time now is: 255 dmas X 4 dma channels X 4096 Bytes.
Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>