- 27 2月, 2010 17 次提交
-
-
由 Adams Xu 提交于
Signed-off-by: NManu Abaraham <manu@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
There is no driver for new NXP TDA18218 tuner which is used by few recent af9015 designs. af9015 uses number 179 as ID for that tuner. Inform this tuner is not supported when device using that tuner is meet. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Autodetect MYGICTV U718 from eeprom hash and select remote automatically. Remove old iManufacturer string compare based remote selection logic. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Autodetect A-Link DTU(m) based eeprom hash and select correct remote. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Add USB ID 0413:6a04 for Leadtek WinFast DTV2000DS. Thanks to Gavin Ramm <gavin_ramm@hotmail.com> for reporting this. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Add USB ID 1b80:e402 for DigitalNow TinyTwin version 2. Thanks to Trevor Phillips <trevor.phillips@gmail.com> for reporting this. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jiri Slaby 提交于
So as a final patch, add support for hash and one hash entry for MSI digi vox mini II: iManufacturer 1 Afatech iProduct 2 DVB-T 2 iSerial 3 010101010600001 It is now handled with proper IR and key map tables. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Acked-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jiri Slaby 提交于
Add af9015_setup structure to hold (right now only remote) setup of distinct receivers. Add af9015_setup_match for matching ids against tables. This is for easier matching different kind of ids against tables to obtain setups. Currently module parameters and usb vendor ids are switched into and matched against tables. Hashes will follow. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Acked-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jiri Slaby 提交于
This is just a code shuffle without functional changes. For easier review of later changes, i.e. preparation. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Acked-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jiri Slaby 提交于
This will be useful for matching of IR tables later. We read the eeprom anyway for dumping. Switch the dumping to print_hex_dump_bytes and compute hash above that by hash = 0; for (u32 VAL) in (eeprom): hash *= GOLDEN_RATIO_PRIME_32 hash += VAL; // while preserving endinaness The computation is moved earlier to the flow, namely from af9015_af9013_frontend_attach to af9015_read_config, so that we can access the sum in af9015_read_config already. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Acked-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Roel Kluin 提交于
If in a cold state and the download succeeded ret is zero, but we should return -ENOMEM. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Massimo Del Fedele 提交于
Adds support to Pinnacle PCTV310e hybrid tuner card, for DVB-T and remote control, still no analog video. [mchehab@redhat.com: fix CodingStyle issues] Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Tobias Klauser 提交于
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Julia Lawall 提交于
If the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Devin Heitmueller 提交于
When firmware 1.20 was introduced, the dib0700 switched from a polling model using a USB control message, to the messages being delivered on a USB bulk pipe. The code I originally added would do a blocking read on the pipe with a 50ms timeout. Because the dvb-usb-remote code makes use of the global workqueue, this resulted in the global workqueue being blocked 50% of the time. Also, the synchronous urb_bulk_msg() call would burn excess CPU time (reflected as an abnormal increase in the system's load average when devices were connected). Rework the logic so that we now setup an asynchronous callback on the bulk pipe, so that we now only handle RC data when it arrives on the pipe. Note that we provide a stub function for the RC polling callback so that we can continue to leverage the shared code in dvb-usb-rc for the setting up of the input device. Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 David Wong 提交于
Improves ATBM8830 reception by using per card AGC configuration rather than register default. Signed-off-by: NDavid T. L. Wong <davidtlwong@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Igor M. Liplianin 提交于
The card based on stv0903 demod, stb6100 tuner. Signed-off-by: NIgor M. Liplianin <liplianin@me.by> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 19 2月, 2010 1 次提交
-
-
由 Ben Hutchings 提交于
cxusb uses the atbm8830 and lgs8gxx (not lgs8gl5) frontends and the max2165 tuner, so it needs to select them. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Cc: stable@kernel.org Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 16 12月, 2009 11 次提交
-
-
由 Igor M. Liplianin 提交于
Patch to support DvbWorld DW2104 device modifications with STV0903 and DS3000 demods as well as TeVii S660 and Prof 1100 Also replace some magic numbers with meaningfull variables. Signed-off-by: NIgor M. Liplianin <liplianin@me.by> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Patrick Boettcher 提交于
This patch fixes the behaviour of the dibusb-i2c-access which was previously changed to avoid accidental EEprom writes: Now it allow i2c-reads without prepended i2c-writes, but it is still not doing anything in case the EEprom is addressed. Thanks to Mario Bachmann for testing. Tested-by: NMario Bachmann <grafgrimm77@gmx.de> Cc: Mario Bachmann <grafgrimm77@gmx.de> Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Olivier Grenie 提交于
Add parameter to change the buffer size. This buffer size is specified in number of Ts packet. This parameter is stored inside the state. For firmware higher than 1.21, the xfer buffer size can be changed inside the dib0700 usb bridge the firware version is stored inside the state Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: NOlivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Olivier Grenie 提交于
STK807xPVR: correct the enumeration Signed-off-by: NOlivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Olivier Grenie 提交于
This patch changes most of the Codingstyle violations which were introduced by the previous patch. Line length less that 80 chars are not corrected. Signed-off-by: NOlivier Grenie <Olivier.Grenie@dibcom.fr> Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Olivier Grenie 提交于
This patchs adds support for the DiBcom DiB0090 RF tuner and for DiBcom's reference design STK8096GP. Small extracts of the DiB0070 and the DiB8000-driver into a common codebase. Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: NOlivier Grenie <Olivier.Grenie@dibcom.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Patrick Boettcher 提交于
The PCTV 74e is not a design based on the dib0700-USB-device controller thus we should not have its USB IDs inside. This reverts partly: Add support for PCTV 74e (Pinnacle) + fix USB vendor IDs Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Patrick Boettcher 提交于
This patch adds support for PCTV 74e (Pinnacle) and it fixes the USB vendor IDs for PCTV (f.k.a Pinnacle). For convenience all new PCTV USB product IDs are also existing with Pinnacle's USB vendor ID. Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
The device is bootingcorrectly, but no frontend is attached. This patch corrects this behaviour. Signed-off-by: NPedro Andres Aranda Gutierrez <paaguti@gmail.com> Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Derek 提交于
Genpix is demodulating DVB-S-like signal with 8PSK modulation used) - this non-standard behaviour was broken by rejecting 8PSK in a standard DVB-S tune request. This problem is fixed by simply reverting back to the drivers original behavior with this patch. Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Akihiro Tsukada 提交于
This patch adds a fix to accept frequency with its center shifted. The driver used to accept center frequencies of the normal UHF band channels, but in ISDB-T, center frequency is shifted with 1/7MHz. It was shifted internally in the driver, but this patch enables to accept both types of frequency. Signed-off-by: NAkihiro Tsukada <tskd2@yahoo.co.jp> Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 06 12月, 2009 11 次提交
-
-
由 Hans Verkuil 提交于
Fix this trivial compile warning: v4l/cxusb.c:1195: warning: unused variable 'n' Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 David Wong 提交于
X-Patchwork-Id: 55873 Add support for cxusb card Mygica D689 DBM-TH USB Signed-off-by: NDavid T. L. Wong <davidtlwong@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Ignacio de Miguel Diaz 提交于
Add USB ID 1b80:e39d for Sveon STV20 Tuner USB DVB-T HDTV. Signed-off-by: NIgnacio de Miguel Diaz <imigueldiaz@gmail.com> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
E3C EC168 DVB USB driver Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sergio C Fortier 提交于
Patch for EvolutePC TvWay+ USB ISDB-Tb remote control support. [dougsland@redhat.com: fixed malformed patch] Cc: Patrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: NSergio C Fortier <sergiofortier@yahoo.com.br> Signed-off-by: NDouglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Akihiro Tsukada 提交于
This patch removes some fe->ops.X() functions which do nothing more useful than the default. Signed-off-by: NAkihiro Tsukada <tskd2@yahoo.co.jp> Signed-off-by: NDouglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Akihiro Tsukada 提交于
This patch makes the driver return the correct DTV_DELIVERY_SYSTEM. The driver previously returned SYS_UNDEFINED for DTV_DELIVERY_SYSTEM property, as it lacked any driver specific S2API support. Signed-off-by: NAkihiro Tsukada <tskd2@yahoo.co.jp> Signed-off-by: NDouglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Michael Krufky 提交于
Allow dvb-usb adapter drivers to specify a fe_ioctl_override callback to enable device-specific handling of DVB frontend operations. Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Looks like eeprom IR mode byte value 0x04 means there is remote which should be polled. Patch enables polling also in case of 0x04. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Support for MSI DIGIVOX mini III remote. Thanks to Aleksandr V. Piskunov <aleksandr.v.piskunov@gmail.com> Thanks to Roman <lists@hasnoname.de> Cc: Aleksandr V. Piskunov <aleksandr.v.piskunov@gmail.com> Cc: Roman <lists@hasnoname.de> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-