提交 b18bd1d8 编写于 作者: D David Wong 提交者: Mauro Carvalho Chehab

V4L/DVB (13376): cx-usb: add Mygica D689 DMB-TH USB support

X-Patchwork-Id: 55873

Add support for cxusb card Mygica D689 DBM-TH USB
Signed-off-by: NDavid T. L. Wong <davidtlwong@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 ea5697fe
......@@ -36,9 +36,11 @@
#include "tuner-xc2028.h"
#include "tuner-simple.h"
#include "mxl5005s.h"
#include "max2165.h"
#include "dib7000p.h"
#include "dib0070.h"
#include "lgs8gxx.h"
#include "atbm8830.h"
/* debug */
static int dvb_usb_cxusb_debug;
......@@ -714,6 +716,11 @@ static struct mxl5005s_config d680_dmb_tuner = {
.AgcMasterByte = 0x00,
};
static struct max2165_config mygica_d689_max2165_cfg = {
.i2c_address = 0x60,
.osc_clk = 20
};
/* Callbacks for DVB USB */
static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap)
{
......@@ -813,6 +820,14 @@ static int cxusb_d680_dmb_tuner_attach(struct dvb_usb_adapter *adap)
return (fe == NULL) ? -EIO : 0;
}
static int cxusb_mygica_d689_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dvb_frontend *fe;
fe = dvb_attach(max2165_attach, adap->fe,
&adap->dev->i2c_adap, &mygica_d689_max2165_cfg);
return (fe == NULL) ? -EIO : 0;
}
static int cxusb_cx22702_frontend_attach(struct dvb_usb_adapter *adap)
{
u8 b;
......@@ -1160,6 +1175,56 @@ static int cxusb_d680_dmb_frontend_attach(struct dvb_usb_adapter *adap)
return 0;
}
static struct atbm8830_config mygica_d689_atbm8830_cfg = {
.prod = ATBM8830_PROD_8830,
.demod_address = 0x40,
.serial_ts = 0,
.ts_sampling_edge = 1,
.ts_clk_gated = 0,
.osc_clk_freq = 30400, /* in kHz */
.if_freq = 0, /* zero IF */
.zif_swap_iq = 1,
};
static int cxusb_mygica_d689_frontend_attach(struct dvb_usb_adapter *adap)
{
struct dvb_usb_device *d = adap->dev;
int n;
/* Select required USB configuration */
if (usb_set_interface(d->udev, 0, 0) < 0)
err("set interface failed");
/* Unblock all USB pipes */
usb_clear_halt(d->udev,
usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
usb_clear_halt(d->udev,
usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
usb_clear_halt(d->udev,
usb_rcvbulkpipe(d->udev, d->props.adapter[0].stream.endpoint));
/* Reset the tuner */
if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 0) < 0) {
err("clear tuner gpio failed");
return -EIO;
}
msleep(100);
if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 1) < 0) {
err("set tuner gpio failed");
return -EIO;
}
msleep(100);
/* Attach frontend */
adap->fe = dvb_attach(atbm8830_attach, &mygica_d689_atbm8830_cfg,
&d->i2c_adap);
if (adap->fe == NULL)
return -EIO;
return 0;
}
/*
* DViCO has shipped two devices with the same USB ID, but only one of them
* needs a firmware download. Check the device class details to see if they
......@@ -1240,6 +1305,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties;
static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties;
static struct dvb_usb_device_properties cxusb_aver_a868r_properties;
static struct dvb_usb_device_properties cxusb_d680_dmb_properties;
static struct dvb_usb_device_properties cxusb_mygica_d689_properties;
static int cxusb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
......@@ -1268,6 +1334,8 @@ static int cxusb_probe(struct usb_interface *intf,
THIS_MODULE, NULL, adapter_nr) ||
0 == dvb_usb_device_init(intf, &cxusb_d680_dmb_properties,
THIS_MODULE, NULL, adapter_nr) ||
0 == dvb_usb_device_init(intf, &cxusb_mygica_d689_properties,
THIS_MODULE, NULL, adapter_nr) ||
0)
return 0;
......@@ -1294,6 +1362,7 @@ static struct usb_device_id cxusb_table [] = {
{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_A868R) },
{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2) },
{ USB_DEVICE(USB_VID_CONEXANT, USB_PID_CONEXANT_D680_DMB) },
{ USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_D689) },
{} /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, cxusb_table);
......@@ -1837,6 +1906,55 @@ static struct dvb_usb_device_properties cxusb_d680_dmb_properties = {
}
};
static struct dvb_usb_device_properties cxusb_mygica_d689_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = CYPRESS_FX2,
.size_of_priv = sizeof(struct cxusb_state),
.num_adapters = 1,
.adapter = {
{
.streaming_ctrl = cxusb_d680_dmb_streaming_ctrl,
.frontend_attach = cxusb_mygica_d689_frontend_attach,
.tuner_attach = cxusb_mygica_d689_tuner_attach,
/* parameter for the MPEG2-data transfer */
.stream = {
.type = USB_BULK,
.count = 5,
.endpoint = 0x02,
.u = {
.bulk = {
.buffersize = 8192,
}
}
},
},
},
.power_ctrl = cxusb_d680_dmb_power_ctrl,
.i2c_algo = &cxusb_i2c_algo,
.generic_bulk_ctrl_endpoint = 0x01,
.rc_interval = 100,
.rc_key_map = d680_dmb_rc_keys,
.rc_key_map_size = ARRAY_SIZE(d680_dmb_rc_keys),
.rc_query = cxusb_d680_dmb_rc_query,
.num_device_descs = 1,
.devices = {
{
"Mygica D689 DMB-TH",
{ NULL },
{ &cxusb_table[19], NULL },
},
}
};
static struct usb_driver cxusb_driver = {
.name = "dvb_usb_cxusb",
.probe = cxusb_probe,
......
......@@ -279,6 +279,7 @@
#define USB_PID_TELESTAR_STARSTICK_2 0x8000
#define USB_PID_MSI_DIGI_VOX_MINI_III 0x8807
#define USB_PID_SONY_PLAYTV 0x0003
#define USB_PID_MYGICA_D689 0xd811
#define USB_PID_ELGATO_EYETV_DTT 0x0021
#define USB_PID_ELGATO_EYETV_DTT_Dlx 0x0020
#define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD 0x5000
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册