We need to add "clean-files" in Makfiles to clean up DT blobs, but we
often miss to do so.

Since there are no source files that end with .dtb or .dtb.S, so we
can clean-up those files from the top-level Makefile.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRob Herring <robh@kernel.org>

This patch adds Broadcom SBA-RAID DT nodes for Stingray SoC.

The Stingray SoC has total 32 SBA-RAID FlexRM rings and it has
8 CPUs so we create 8 SBA-RAID instances (one for each CPU).
This way Linux DMAENGINE will have one SBA-RAID DMA device for
each CPU.
Signed-off-by: NAnup Patel <anup.patel@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

We have two instances of FlexRM on Stingray. One for SBA RAID
offload engine and another for SPU2 Crypto offload engine.

This patch adds FlexRM mailbox controller DT nodes for Stingray.
Signed-off-by: NAnup Patel <anup.patel@broadcom.com>
Signed-off-by: NRaveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

Add DT nodes for SATA host controllers and SATA PHYs
on Stingray SoC
Signed-off-by: NSrinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: NRay Jui <ray.jui@broadcom.com>
Reviewed-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

This patch adds DT node to enable BGMAC driver on Stingray
Signed-off-by: NAbhishek Shah <abhishek.shah@broadcom.com>
Reviewed-by: NRay Jui <ray.jui@broadcom.com>
Reviewed-by: NOza Oza <oza.oza@broadcom.com>
Reviewed-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

We have 8 instances of sp804 in Stingray SoC. Let's enable
it in Stingray DT.
Signed-off-by: NAnup Patel <anup.patel@broadcom.com>
Reviewed-by: NRay Jui <rjui@broadcom.com>
Reviewed-by: NScott Branden <sbranden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

Added MDIO multiplexer iproc DT node for Stingray, which contains
the child nodes of PCIe serdes, RGMII, SATA and USB phy MDIO slaves.
Signed-off-by: NSrinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: NRay Jui <ray.jui@broadcom.com>
Reviewed-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

This patch enables stats for CCN-502 interconnect on Stingray.
Signed-off-by: NVelibor Markovski <velibor.markovski@broadcom.com>
Reviewed-by: NRay Jui <ray.jui@broadcom.com>
Reviewed-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

The Stingray SoC has two instances of SDHCI controller
and one instance of iProc PWM.

Let's enable above mentioned devices in Stingray DT.
Signed-off-by: NSrinath Mannam <srinath.mannam@broadcom.com>
Signed-off-by: NAnup Patel <anup.patel@broadcom.com>
Reviewed-by: NRay Jui <ray.jui@broadcom.com>
Reviewed-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

We have two instance of PL022 SPI controllers, one instance of
DMA PL330, and one non-secure SP805 Watchdog on Stingray SOC.

This patch adds DT nodes for the above mentioned devices in
Stingray DT.
Signed-off-by: NAnup Patel <anup.patel@broadcom.com>
Reviewed-by: NPramod KUMAR <pramod.kumar@broadcom.com>
Reviewed-by: NRay Jui <rjui@broadcom.com>
Reviewed-by: NScott Branden <sbranden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

This patch adds I2C DT nodes on Stingray SoC.
Signed-off-by: NOza Pawandeep <oza.oza@broadcom.com>
Reviewed-by: NVikram Prakash <vikram.prakash@broadcom.com>
Reviewed-by: NRay Jui <ray.jui@broadcom.com>
Reviewed-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

The GPIOs on Stingray SOC are based on iProc GPIOs hence
using this we add GPIO DT nodes for Stingray SOC.
Signed-off-by: NPramod Kumar <pramodku@broadcom.com>
Reviewed-by: NRay Jui <rjui@broadcom.com>
Reviewed-by: NScott Branden <sbranden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

This patch adds pinctrl and pinmux related DT nodes for
Stingray SOC.

For manageability, pinctrl and pinmum DT nodes are added
as separate DTSi file and included in main DTSi file.
Signed-off-by: NPramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: NAnup Patel <anup.patel@broadcom.com>
Reviewed-by: NRay Jui <ray.jui@broadcom.com>
Reviewed-by: NVikram Prakash <vikram.prakash@broadcom.com>
Reviewed-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

This patch adds NAND controller DT Node and NAND chip DT
node for Stingray SOC and Stingray reference boards.
Signed-off-by: NPramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: NAbhishek Shah <abhishek.shah@broadcom.com>
Reviewed-by: NVikram Prakash <vikram.prakash@broadcom.com>
Reviewed-by: NRay Jui <ray.jui@broadcom.com>
Reviewed-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

This patch describes Stingray SOC clock tree using
DT nodes in Stingray DTS.
Signed-off-by: NSandeep Tripathy <sandeep.tripathy@broadcom.com>
Reviewed-by: NRay Jui <ray.jui@broadcom.com>
Reviewed-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

The Broadcom Stingray SoC is a new member in Broadcom iProc
SoC family.

This patch adds initial DTS files for Broadcom Stingray SoC
and two of its reference boards (bcm958742k and bcm958742t).

We have lot of reference boards and large number of devices
in Broadcom Stingray SoC so eventually we will have quite
a few DTS files for Stingray. To tackle, we have added a
separate directory for Stingray DTS files.
Signed-off-by: NAnup Patel <anup.patel@broadcom.com>
Signed-off-by: NScott Branden <scott.branden@broadcom.com>
Reviewed-by: NRay Jui <rjui@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>