On polaris provide a dummy regulator for the smsc911x driver.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

On magicpanelr2 provide a dummy regulator for the smsc911x driver.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

On apsh4ad0a provide a dummy regulator for the smsc911x driver.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

On apsh4a3a provide a dummy regulator for the smsc911x driver.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Everything is using sparseirq these days, so we have no need to
arbitrarily size nr_irqs ahead of time. The legacy IRQ pre-allocation
likewise has no meaning for us, so that's killed off too. We now depend
on nr_irqs expansion by the generic hardirq layer instead.

It's also worth noting that the majority of boards had completely bogus
values for their nr_irqs relative to their CPU and configurations, so
this ends up correcting behaviour for quite a few platforms.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Migrate sh7763rdp to evt2irq backed hwirq lookups.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Migrate migor to evt2irq backed hwirq lookups.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Migrate kfr2r09 to evt2irq backed hwirq lookups.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Migrate ecovec24 to evt2irq backed hwirq lookups.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Migrate ap325rxa to evt2irq backed hwirq lookups.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Migrate urquell to evt2irq backed hwirq lookups.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Migrate sh7785lcr to evt2irq backed hwirq lookups.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Migrate hp6xx to evt2irq backed hwirq lookups.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Migrate Solution Engine boards to evt2irq backed hwirq lookups.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Migrate sh7757lcr to evt2irq() backed hwirq lookups.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Migrate magicpanelr2 to evt2irq() backed hwirq lookups.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Migrate espt to evt2irq() backed hwirq lookups.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Migrate edosk7760 to evt2irq() backed hwirq lookups.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Migrate edosk7705 to evt2irq() backed hwirq lookups.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Use the default partition parser, cmdlinepart, provided by the plat_nand driver.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

The RSK2+SH7269 board uses the SH7269 processor. It is often
referred to as just rsk7269. NOR Flash, SDRAM, serial, USB Host and
ethernet are working.
Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The RSK2+SH7264 board uses the sh7264 processor. It is often
referred to as just rsk7264. NOR Flash, SDRAM, serial, USB Host and
ethernet are working.
Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Move the sourcing of the board specific Kconfig files into the
"Board support" menu. Without this they appear underneath the
"Board support" menu, in the "System type" menu.

[lethal@linux-sh.org: handle the magicpanelr2 case, too]
Signed-off-by: NStuart Menefy <stuart.menefy@st.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch uses simple-card driver instead of fsi-da7210 on each board.
To select DA7210 driver, each boards select it on Kconfig.

This patch removes fsi-da7210 driver which is no longer needed
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch uses simple-card driver instead of fsi-ak4642 on each board.
To select AK4642 driver, each boards select it on Kconfig.

This patch removes fsi-ak4642 driver which is no longer needed
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Quite a bit of fallout all over the place, nothing terribly exciting.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Disintegrate asm/system.h for SH.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
cc: linux-sh@vger.kernel.org

Polling for card hotplug events is a better option than using SDHI native
hotplug interrupt, because the latter option forces the controller to stay
permanently powered up and enabled.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The struct sh_mobile_lcdc_chan_cfg platform data contains a list of
video modes. Name the lcd_cfg and num_cfg fields to reflect that they
describe video modes.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Update board code accordingly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Update board code accordingly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

The field is unused, remove it. Update board code accordingly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Convert remaining sh board code to use sh_clk_ops.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

The latest sh_eth driver needs a resource of TSU in the channel 1,
if the controller has TSU registers. So, this patch adds the resource.
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Current FSI got each PortA/B parameter by porta_flags/portb_flags from platform.
And .set_rate function was shared for PortA/B.
This structure was not readable and not flexible.
This patch adds sh_fsi_port_info, and its own settings was added on each platform.
it is preparation for DMAEngine support
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Fix compilation breakage

arch/sh/boards/mach-se/7724/setup.c:182: error: 'V4L2_PIX_FMT_RGB565' undeclared here (not in a function)
make[3]: *** [arch/sh/boards/mach-se/7724/setup.o] Error 1

caused by commit "fbdev: sh_mobile_lcdc: Support FOURCC-based format API"
Also add other missing headers, even if compilation currently succeeds
because of their indirect inclusion via other headers.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Specifying MMCIF DMA slave IDs via a struct sh_mmcif_dma instance is
deprecated. Update sh7757lcr to specify slave IDs embedded in
struct sh_mmcif_plat_data.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The board has an eMMC chip, so we cannot remove the chip.
In this case, we have to set the MMC_CAP_NONREMOVABLE to the caps
parameter.
Reported-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Follows the RSK+ change for the same rationale.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>