It used to be an ad-hoc hack defined by the x86 version of
<asm/bitops.h> that enabled a couple of library routines to know whether
an integer multiply is faster than repeated shifts and additions.

This just makes it use the real Kconfig system instead, and makes x86
(which was the only architecture that did this) select the option.

NOTE! Even for x86, this really is kind of wrong.  If we cared, we would
probably not enable this for builds optimized for netburst (P4), where
shifts-and-adds are generally faster than multiplies.  This patch does
*not* change that kind of logic, though, it is purely a syntactic change
with no code changes.

This was triggered by the fact that we have other places that really
want to know "do I want to expand multiples by constants by hand or
not", particularly the hash generation code.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently new system call kexec_file_load() and all the associated code
compiles if CONFIG_KEXEC=y.  But new syscall also compiles purgatory
code which currently uses gcc option -mcmodel=large.  This option seems
to be available only gcc 4.4 onwards.

Hiding new functionality behind a new config option will not break
existing users of old gcc.  Those who wish to enable new functionality
will require new gcc.  Having said that, I am trying to figure out how
can I move away from using -mcmodel=large but that can take a while.

I think there are other advantages of introducing this new config
option.  As this option will be enabled only on x86_64, other arches
don't have to compile generic kexec code which will never be used.  This
new code selects CRYPTO=y and CRYPTO_SHA256=y.  And all other arches had
to do this for CONFIG_KEXEC.  Now with introduction of new config
option, we can remove crypto dependency from other arches.

Now CONFIG_KEXEC_FILE is available only on x86_64.  So whereever I had
CONFIG_X86_64 defined, I got rid of that.

For CONFIG_KEXEC_FILE, instead of doing select CRYPTO=y, I changed it to
"depends on CRYPTO=y".  This should be safer as "select" is not
recursive.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Tested-by: NShaun Ruffell <sruffell@digium.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is the final piece of the puzzle of verifying kernel image signature
during kexec_file_load() syscall.

This patch calls into PE file routines to verify signature of bzImage.  If
signature are valid, kexec_file_load() succeeds otherwise it fails.

Two new config options have been introduced.  First one is
CONFIG_KEXEC_VERIFY_SIG.  This option enforces that kernel has to be
validly signed otherwise kernel load will fail.  If this option is not
set, no signature verification will be done.  Only exception will be when
secureboot is enabled.  In that case signature verification should be
automatically enforced when secureboot is enabled.  But that will happen
when secureboot patches are merged.

Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG.  This option
enables signature verification support on bzImage.  If this option is not
set and previous one is set, kernel image loading will fail because kernel
does not have support to verify signature of bzImage.

I tested these patches with both "pesign" and "sbsign" signed bzImages.

I used signing_key.priv key and signing_key.x509 cert for signing as
generated during kernel build process (if module signing is enabled).

Used following method to sign bzImage.

pesign
======
- Convert DER format cert to PEM format cert
openssl x509 -in signing_key.x509 -inform DER -out signing_key.x509.PEM -outform
PEM

- Generate a .p12 file from existing cert and private key file
openssl pkcs12 -export -out kernel-key.p12 -inkey signing_key.priv -in
signing_key.x509.PEM

- Import .p12 file into pesign db
pk12util -i /tmp/kernel-key.p12 -d /etc/pki/pesign

- Sign bzImage
pesign -i /boot/vmlinuz-3.16.0-rc3+ -o /boot/vmlinuz-3.16.0-rc3+.signed.pesign
-c "Glacier signing key - Magrathea" -s

sbsign
======
sbsign --key signing_key.priv --cert signing_key.x509.PEM --output
/boot/vmlinuz-3.16.0-rc3+.signed.sbsign /boot/vmlinuz-3.16.0-rc3+

Patch details:

Well all the hard work is done in previous patches.  Now bzImage loader
has just call into that code and verify whether bzImage signature are
valid or not.

Also create two config options.  First one is CONFIG_KEXEC_VERIFY_SIG.
This option enforces that kernel has to be validly signed otherwise kernel
load will fail.  If this option is not set, no signature verification will
be done.  Only exception will be when secureboot is enabled.  In that case
signature verification should be automatically enforced when secureboot is
enabled.  But that will happen when secureboot patches are merged.

Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG.  This option
enables signature verification support on bzImage.  If this option is not
set and previous one is set, kernel image loading will fail because kernel
does not have support to verify signature of bzImage.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Load purgatory code in RAM and relocate it based on the location.
Relocation code has been inspired by module relocation code and purgatory
relocation code in kexec-tools.

Also compute the checksums of loaded kexec segments and store them in
purgatory.

Arch independent code provides this functionality so that arch dependent
bootloaders can make use of it.

Helper functions are provided to get/set symbol values in purgatory which
are used by bootloaders later to set things like stack and entry point of
second kernel etc.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

currently bin2c builds only if CONFIG_IKCONFIG=y. But bin2c will now be
used by kexec too.  So make it compilation dependent on CONFIG_BUILD_BIN2C
and this config option can be selected by CONFIG_KEXEC and CONFIG_IKCONFIG.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rather than have architectures #define ARCH_HAS_SG_CHAIN in an
architecture specific scatterlist.h, make it a proper Kconfig option and
use that instead.  At same time, remove the header files are are now
mostly useless and just include asm-generic/scatterlist.h.

[sfr@canb.auug.org.au: powerpc files now need asm/dma.h]
Signed-off-by: NLaura Abbott <lauraa@codeaurora.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>			[x86]
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>	[powerpc]
Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Without CONFIG_RELOCATABLE the early boot code will decompress the
kernel to LOAD_PHYSICAL_ADDR. While this may have been fine in the BIOS
days, that isn't going to fly with UEFI since parts of the firmware
code/data may be located at LOAD_PHYSICAL_ADDR.

Straying outside of the bounds of the regions we've explicitly requested
from the firmware will cause all sorts of trouble. Bruno reports that
his machine resets while trying to decompress the kernel image.

We already go to great pains to ensure the kernel is loaded into a
suitably aligned buffer, it's just that the address isn't necessarily
LOAD_PHYSICAL_ADDR, because we can't guarantee that address isn't in-use
by the firmware.

Explicitly enforce CONFIG_RELOCATABLE for the EFI boot stub, so that we
can load the kernel at any address with the correct alignment.
Reported-by: NBruno Prémont <bonbons@linux-vserver.org>
Tested-by: NBruno Prémont <bonbons@linux-vserver.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Building a 32-bit kernel with CONFIG_X86_USE_3DNOW and CONFIG_EFI_STUB
leads to the following build error,

  drivers/firmware/efi/libstub/lib.a(efi-stub-helper.o): In function `efi_relocate_kernel':
  efi-stub-helper.c:(.text+0xda5): undefined reference to `_mmx_memcpy'

This is due to the fact that the EFI boot stub pulls in the 3DNow
optimized versions of the memcpy() prototype from
arch/x86/include/asm/string_32.h, even though the _mmx_memcpy()
implementation isn't available in the EFI stub.

For now, predicate CONFIG_EFI_STUB on !CONFIG_X86_USE_3DNOW. This is
most definitely a temporary fix. A complete solution will involve
selectively including kernel headers/symbols into the early-boot
execution environment of the EFI boot stub, i.e. something analogous to
the way that the _SETUP symbol is used.

Previous attempts have been made to fix this kind of problem, though
none seem to have ever been merged,

  http://lkml.kernel.org/r/20120329104822.GA17233@x1.osrc.amd.com

Clearly, this problem has been around for a long time.
Reported-by: NIngo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/1407193939-27813-1-git-send-email-matt@console-pimps.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

The Power Management Controller (PMC) controls many of the power
management features present in the Atom SoC. This driver provides
a native power off function via PMC PCI IO port.

On some ACPI hardware-reduced platforms(e.g. ASUS-T100), ACPI sleep
registers are not valid so that (*pm_power_off)() is not hooked by
acpi_power_off(). The power off function in this driver is installed
only when pm_power_off is NULL.
Signed-off-by: NAubrey Li <aubrey.li@linux.intel.com>
Link: http://lkml.kernel.org/r/53B0FEEA.3010805@linux.intel.comSigned-off-by: NLejun Zhu <lejun.zhu@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

The only user of the cycle_last validation is the x86 TSC. In order to
provide NMI safe accessor functions for clock monotonic and
monotonic_raw we need to do that in the core.

We can't do the TSC specific

    if (now < cycle_last)
       	    now = cycle_last;

for the other wrapping around clocksources, but TSC has
CLOCKSOURCE_MASK(64) which actually does not mask out anything so if
now is less than cycle_last the subtraction will give a negative
result. So we can check for that in clocksource_delta() and return 0
for that case.

Implement and enable it for x86
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

The non-scalar ktime_t implementation is basically a timespec
which has to be changed to support dates past 2038 on 32bit
systems.

This patch removes the non-scalar ktime_t implementation, forcing
the scalar s64 nanosecond version on all architectures.

This may have additional performance overhead on some 32bit
systems when converting between ktime_t and timespec structures,
however the majority of 32bit systems (arm and i386) were already
using scalar ktime_t, so no performance regressions will be seen
on those platforms.

On affected platforms, I'm open to finding optimizations, including
avoiding converting to timespecs where possible.

[ tglx: We can now cleanup the ktime_t.tv64 mess, but thats a
  different issue and we can throw a coccinelle script at it ]
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

Currently APEI depends on x86 architecture. It is because of NMI hardware
error notification of GHES which is currently supported by x86 only.
However, many other APEI features can be still used perfectly by other
architectures.

This commit adds two symbols:
1. HAVE_ACPI_APEI for those archs which support APEI.
2. HAVE_ACPI_APEI_NMI which is used for NMI code isolation in ghes.c
   file. NMI related data and functions are grouped so they can be wrapped
   inside one #ifdef section. Appropriate function stubs are provided for
   !NMI case.

Note there is no functional changes for x86 due to hard selected
HAVE_ACPI_APEI and HAVE_ACPI_APEI_NMI symbols.
Signed-off-by: NTomasz Nowicki <tomasz.nowicki@linaro.org>
Acked-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NTony Luck <tony.luck@intel.com>

The use of _PDC is deprecated in ACPI 3.0 in favor of _OSC,
as ARM platform is supported only in ACPI 5.0 or higher version,
_PDC will not be used in ARM platform, so make Make _PDC only for
platforms with Intel CPUs.

Introduce ARCH_MIGHT_HAVE_ACPI_PDC and move _PDC related code in
ACPI processor driver into a single file processor_pdc.c, make x86
and ia64 select it when ACPI is enabled.

This patch also use pr_* to replace printk to fix the checkpatch
warning and factor acpi_processor_alloc_pdc() a little bit to
avoid duplicate pr_err() code.
Suggested-by: NRobert Richter <rric@kernel.org>
Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

With the addition of ARM64 that does not have a traditional BIOS to
scan, add a config option which is selected on x86 (ia64 doesn't need
it either, it is EFI/UEFI based system) to do the traditional BIOS
scanning for tables.
Signed-off-by: NGraeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Nothing sets function_trace_stop to disable function tracing anymore.
Remove the check for it in the arch code.

Link: http://lkml.kernel.org/r/53C54D32.6000000@zytor.comAcked-by: NH. Peter Anvin <hpa@linux.intel.com>
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The optimistic spin code assumes regular stores and cmpxchg() play nice;
this is found to not be true for at least: parisc, sparc32, tile32,
metag-lock1, arc-!llsc and hexagon.

There is further wreckage, but this in particular seemed easy to
trigger, so blacklist this.

Opt in for known good archs.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Reported-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Waiman Long <waiman.long@hp.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: John David Anglin <dave.anglin@bell.net>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: stable@vger.kernel.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/20140606175316.GV13930@laptop.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

In order for other archs (such as arm64) to be able to reuse the virtual
mode function call wrappers, move them to drivers/firmware/efi/runtime-wrappers.c.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Currently x86 support identity mapping between GSI(IOAPIC pin) and IRQ
number, so continous IRQs at low end are statically allocated to IOAPICs
at boot time. This design causes trouble to support IOAPIC hotplug.

This patch implements basic mechanism to dynamically allocate IRQ on
demand for IOAPIC pins by using irqdomain framework.

It first adds several fields into struct ioapic to support irqdomain.
Then it implements an algorithm to dynamically allocate IRQ number
for IOAPIC pins on demand.

Currently it supports three types of irqdomain:
1) LEGACY: used to support IOAPIC hosting legacy IRQs and building
   identity mapping for legacy IRQs. A speical case, we dynamically
   allocate IRQ number for IOAPIC pin which has GSI number below
   nr_legacy_irqs() but isn't legacy IRQ. This is for backward
   compatibility and avoid regression.
2) STRICT: build identity mapping between GSI and IRQ nubmer.
3) DYNAMIC: dynamically allocate IRQ number for IOAPIC pin on demand.

Legacy(ISA) IRQs is not managed by irqdomain because there may be
multiple pins sharing the same IRQ number and current irqdomain only
supports 1:1 mapping between pins and IRQ.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Link: http://lkml.kernel.org/r/1402302011-23642-24-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Intel CE4100 platforms need IOAPIC support becasue some devices are
always connected to the second IOAPIC, so make CONFIG_CE depends on
CONFIG_X86_IO_APIC.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1402302011-23642-18-git-send-email-jiang.liu@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Changes kASLR from being compile-time selectable (blocked by
CONFIG_HIBERNATION), to being boot-time selectable (with hibernation
available by default) via the "kaslr" kernel command line.
Signed-off-by: NKees Cook <keescook@chromium.org>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Make x86 use the fair rwlock_t.

Implement the custom queue_write_unlock() for best performance.
Signed-off-by: NWaiman Long <Waiman.Long@hp.com>
[peterz: near complete rewrite]
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: "Paul E.McKenney" <paulmck@linux.vnet.ibm.com>
Cc: linux-kernel@vger.kernel.org
Cc: x86@kernel.org
Link: http://lkml.kernel.org/n/tip-r1xuzmdysvuhl3h86n5fbxi7@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Tracking dirty status on 2 level pages requires very ugly macros and
taking into account how old the machines who can operate without PAE
mode only are, lets drop soft dirty tracker from them for code
simplicity (note I can't drop all the macros from 2 level pages by now
since _PAGE_BIT_PROTNONE and _PAGE_BIT_FILE are still used even without
tracker).

Linus proposed to completely rip off softdirty support on x86-32 (even
with PAE) and since for CRIU we're not planning to support native x86-32
mode, lets do that.

(Softdirty tracker is relatively new feature which is mostly used by
CRIU so I don't expect if such API change would cause problems for
userspace).
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Noonan <steven@uplinklabs.net>
Cc: Rik van Riel <riel@redhat.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The DMA Contiguous Memory Allocator support on x86 is disabled when
swiotlb config option is enabled.  So DMA CMA is always disabled on
x86_64 because swiotlb is always enabled.  This attempts to support for
DMA CMA with enabling swiotlb config option.

The contiguous memory allocator on x86 is integrated in the function
dma_generic_alloc_coherent() which is .alloc callback in nommu_dma_ops
for dma_alloc_coherent().

x86_swiotlb_alloc_coherent() which is .alloc callback in swiotlb_dma_ops
tries to allocate with dma_generic_alloc_coherent() firstly and then
swiotlb_alloc_coherent() is called as a fallback.

The main part of supporting DMA CMA with swiotlb is that changing
x86_swiotlb_free_coherent() which is .free callback in swiotlb_dma_ops
for dma_free_coherent() so that it can distinguish memory allocated by
dma_generic_alloc_coherent() from one allocated by
swiotlb_alloc_coherent() and release it with dma_generic_free_coherent()
which can handle contiguous memory.  This change requires making
is_swiotlb_buffer() global function.

This also needs to change .free callback in the dma_map_ops for amd_gart
and sta2x11, because these dma_ops are also using
dma_generic_alloc_coherent().
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

32-bit support for NUMA is an oddity on its own but with automatic NUMA
balancing on top there is a reasonable risk that the CPUPID information
cannot be stored in the page flags.  This patch removes support for
automatic NUMA support on 32-bit x86.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Noonan <steven@uplinklabs.net>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently hugepage migration is available for all archs which support
pmd-level hugepage, but testing is done only for x86_64 and there're
bugs for other archs.  So to avoid breaking such archs, this patch
limits the availability strictly to x86_64 until developers of other
archs get interested in enabling this feature.

Simply disabling hugepage migration on non-x86_64 archs is not enough to
fix the reported problem where sys_move_pages() hits the BUG_ON() in
follow_page(FOLL_GET), so let's fix this by checking if hugepage
migration is supported in vma_migratable().
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: NMichael Ellerman <mpe@ellerman.id.au>
Tested-by: NMichael Ellerman <mpe@ellerman.id.au>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: <stable@vger.kernel.org>	[3.12+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is just a cleanup to get rid of the create/destroy_irq variants
which were designed in hell.

The long term solution for x86 is to switch over to irq domains and
cleanup the whole vector allocation mess.

The generic irq_alloc_hwirqs() interface deliberately prevents
multi-MSI vector allocation to further enforce the irq domain
conversion (aside of the desire to support ioapic hotplug).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NGrant Likely <grant.likely@linaro.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20140507154334.482904047@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

We can now enable the 64bit option for the Goldfish 64bit emulator.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently drivers that run on non-IOSF systems (Core/Xeon) can't use the IOSF
driver on SOC's without selecting it which forces an unnecessary and limiting
dependency. Provides dummy functions to allow these modules to conditionally
use the driver on IOSF equipped platforms without impacting their ability to
compile and load on non-IOSF platforms. Build default m to ensure availability
on x86 SOC's.
Signed-off-by: NDavid E. Box <david.e.box@linux.intel.com>
Link: http://lkml.kernel.org/r/1399668248-24199-2-git-send-email-david.e.box@linux.intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Embedded systems, which may be very memory-size-sensitive, are
extremely unlikely to ever encounter any 16-bit software, so make it
a CONFIG_EXPERT option to turn off support for any 16-bit software
whatsoever.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1398816946-3351-1-git-send-email-hpa@linux.intel.com

Make espfix64 a hidden Kconfig option.  This fixes the x86-64 UML
build which had broken due to the non-existence of init_espfix_bsp()
in UML: since UML uses its own Kconfig, this option does not appear in
the UML build.

This also makes it possible to make support for 16-bit segments a
configuration option, for the people who want to minimize the size of
the kernel.
Reported-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Richard Weinberger <richard@nod.at>
Link: http://lkml.kernel.org/r/1398816946-3351-1-git-send-email-hpa@linux.intel.com

In preparation to support FIX_EARLYCON_MEM on other arches, make the
option per arch.
Signed-off-by: NRob Herring <robh@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Move x86 over to the generic early ioremap implementation.
Signed-off-by: NMark Salter <msalter@redhat.com>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently AUDITSYSCALL has a long list of architecture depencency:
       depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML ||
		SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ALPHA)
The purpose of this patch is to replace it with HAVE_ARCH_AUDITSYSCALL
for simplicity.
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com> (arm)
Acked-by: Richard Guy Briggs <rgb@redhat.com> (audit)
Acked-by: Matt Turner <mattst88@gmail.com> (alpha)
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: NEric Paris <eparis@redhat.com>

This patch move the vsyscall_gtod_data handling out of vsyscall_64.c
into an additonal file vsyscall_gtod.c to make the functionality
available for x86 32 bit kernel.

It also adds a new vsyscall_32.c which setup the VVAR page.
Reviewed-by: NAndy Lutomirski <luto@amacapital.net>
Signed-off-by: NStefani Seibold <stefani@seibold.net>
Link: http://lkml.kernel.org/r/1395094933-14252-2-git-send-email-stefani@seibold.netSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

The compat vDSO is a complicated hack that's needed to maintain
compatibility with a small range of glibc versions.

This removes it and replaces it with a much simpler hack: a config
option to disable the 32-bit vDSO by default.

This also changes the default value of CONFIG_COMPAT_VDSO to n --
users configuring kernels from scratch almost certainly want that
choice.
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/4bb4690899106eb11430b1186d5cc66ca9d1660c.1394751608.git.luto@amacapital.netSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Add the Kconfig option and bump the kernel header version so that boot
loaders can check whether the handover code is available if they want.

The xloadflags field in the bzImage header is also updated to reflect
that the kernel supports both entry points by setting both of
XLF_EFI_HANDOVER_32 and XLF_EFI_HANDOVER_64 when CONFIG_EFI_MIXED=y.
XLF_CAN_BE_LOADED_ABOVE_4G is disabled so that the kernel text is
guaranteed to be addressable with 32-bits.

Note that no boot loaders should be using the bits set in xloadflags to
decide which entry point to jump to. The entire scheme is based on the
concept that 32-bit bootloaders always jump to ->handover_offset and
64-bit loaders always jump to ->handover_offset + 512. We set both bits
merely to inform the boot loader that it's safe to use the native
handover offset even if the machine type in the PE/COFF header claims
otherwise.
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

The NUMAQ support seems to be unmaintained, remove it.

Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: David Rientjes <rientjes@google.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/n/530CFD6C.7040705@zytor.com

The SGI Visual Workstation seems to be dead; remove support so we
don't have to continue maintaining it.

Cc: Andrey Panin <pazke@donpac.ru>
Cc: Michael Reed <mdr@sgi.com>
Link: http://lkml.kernel.org/r/530CFD6C.7040705@zytor.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

The x86 CPU feature modalias handling existed before it was reimplemented
generically. This patch aligns the x86 handling so that it
(a) reuses some more code that is now generic;
(b) uses the generic format for the modalias module metadata entry, i.e., it
    now uses 'cpu:type:x86,venVVVVfamFFFFmodMMMM:feature:,XXXX,YYYY' instead of
    the 'x86cpu:vendor:VVVV:family:FFFF:model:MMMM:feature:,XXXX,YYYY' that was
    used before.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NH. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There should no longer be any IBM x440 systems or those using the
Summit/EXA chipset out in the wild, so remove support for it.

We've done our due diligence in reaching out to any contact information
listed for this chipset and no indication was given that it should be
kept around.
Signed-off-by: NDavid Rientjes <rientjes@google.com>