提交 d2312e33 编写于 作者: S Stefani Seibold 提交者: H. Peter Anvin

x86, vdso: Make vsyscall_gtod_data handling x86 generic

This patch move the vsyscall_gtod_data handling out of vsyscall_64.c
into an additonal file vsyscall_gtod.c to make the functionality
available for x86 32 bit kernel.

It also adds a new vsyscall_32.c which setup the VVAR page.
Reviewed-by: NAndy Lutomirski <luto@amacapital.net>
Signed-off-by: NStefani Seibold <stefani@seibold.net>
Link: http://lkml.kernel.org/r/1395094933-14252-2-git-send-email-stefani@seibold.netSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
上级 1f2cbcf6
......@@ -107,9 +107,9 @@ config X86
select HAVE_ARCH_SOFT_DIRTY
select CLOCKSOURCE_WATCHDOG
select GENERIC_CLOCKEVENTS
select ARCH_CLOCKSOURCE_DATA if X86_64
select ARCH_CLOCKSOURCE_DATA
select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC)
select GENERIC_TIME_VSYSCALL if X86_64
select GENERIC_TIME_VSYSCALL
select KTIME_SCALAR if X86_32
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
......
......@@ -3,8 +3,6 @@
#ifndef _ASM_X86_CLOCKSOURCE_H
#define _ASM_X86_CLOCKSOURCE_H
#ifdef CONFIG_X86_64
#define VCLOCK_NONE 0 /* No vDSO clock available. */
#define VCLOCK_TSC 1 /* vDSO should use vread_tsc. */
#define VCLOCK_HPET 2 /* vDSO should use vread_hpet. */
......@@ -14,6 +12,4 @@ struct arch_clocksource_data {
int vclock_mode;
};
#endif /* CONFIG_X86_64 */
#endif /* _ASM_X86_CLOCKSOURCE_H */
......@@ -16,9 +16,6 @@
* you mess up, the linker will catch it.)
*/
/* Base address of vvars. This is not ABI. */
#define VVAR_ADDRESS (-10*1024*1024 - 4096)
#if defined(__VVAR_KERNEL_LDS)
/* The kernel linker script defines its own magic to put vvars in the
......@@ -29,6 +26,15 @@
#else
extern char __vvar_page;
/* Base address of vvars. This is not ABI. */
#ifdef CONFIG_X86_64
#define VVAR_ADDRESS (-10*1024*1024 - 4096)
#else
#define VVAR_ADDRESS (&__vvar_page)
#endif
#define DECLARE_VVAR(offset, type, name) \
static type const * const vvaraddr_ ## name = \
(void *)(VVAR_ADDRESS + (offset));
......
......@@ -26,7 +26,7 @@ obj-$(CONFIG_IRQ_WORK) += irq_work.o
obj-y += probe_roms.o
obj-$(CONFIG_X86_32) += i386_ksyms_32.o
obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o
obj-y += syscall_$(BITS).o
obj-y += syscall_$(BITS).o vsyscall_gtod.o
obj-$(CONFIG_X86_64) += vsyscall_64.o
obj-$(CONFIG_X86_64) += vsyscall_emu_64.o
obj-$(CONFIG_SYSFS) += ksysfs.o
......
......@@ -752,9 +752,7 @@ static struct clocksource clocksource_hpet = {
.mask = HPET_MASK,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.resume = hpet_resume_counter,
#ifdef CONFIG_X86_64
.archdata = { .vclock_mode = VCLOCK_HPET },
#endif
};
static int hpet_clocksource_register(void)
......
......@@ -985,9 +985,7 @@ static struct clocksource clocksource_tsc = {
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS |
CLOCK_SOURCE_MUST_VERIFY,
#ifdef CONFIG_X86_64
.archdata = { .vclock_mode = VCLOCK_TSC },
#endif
};
void mark_tsc_unstable(char *reason)
......
......@@ -147,7 +147,6 @@ SECTIONS
_edata = .;
} :data
#ifdef CONFIG_X86_64
. = ALIGN(PAGE_SIZE);
__vvar_page = .;
......@@ -169,8 +168,6 @@ SECTIONS
. = ALIGN(__vvar_page + PAGE_SIZE, PAGE_SIZE);
#endif /* CONFIG_X86_64 */
/* Init code and data - will be freed after init */
. = ALIGN(PAGE_SIZE);
.init.begin : AT(ADDR(.init.begin) - LOAD_OFFSET) {
......
......@@ -47,14 +47,12 @@
#include <asm/segment.h>
#include <asm/desc.h>
#include <asm/topology.h>
#include <asm/vgtod.h>
#include <asm/traps.h>
#define CREATE_TRACE_POINTS
#include "vsyscall_trace.h"
DEFINE_VVAR(int, vgetcpu_mode);
DEFINE_VVAR(struct vsyscall_gtod_data, vsyscall_gtod_data);
static enum { EMULATE, NATIVE, NONE } vsyscall_mode = EMULATE;
......@@ -77,48 +75,6 @@ static int __init vsyscall_setup(char *str)
}
early_param("vsyscall", vsyscall_setup);
void update_vsyscall_tz(void)
{
vsyscall_gtod_data.sys_tz = sys_tz;
}
void update_vsyscall(struct timekeeper *tk)
{
struct vsyscall_gtod_data *vdata = &vsyscall_gtod_data;
write_seqcount_begin(&vdata->seq);
/* copy vsyscall data */
vdata->clock.vclock_mode = tk->clock->archdata.vclock_mode;
vdata->clock.cycle_last = tk->clock->cycle_last;
vdata->clock.mask = tk->clock->mask;
vdata->clock.mult = tk->mult;
vdata->clock.shift = tk->shift;
vdata->wall_time_sec = tk->xtime_sec;
vdata->wall_time_snsec = tk->xtime_nsec;
vdata->monotonic_time_sec = tk->xtime_sec
+ tk->wall_to_monotonic.tv_sec;
vdata->monotonic_time_snsec = tk->xtime_nsec
+ (tk->wall_to_monotonic.tv_nsec
<< tk->shift);
while (vdata->monotonic_time_snsec >=
(((u64)NSEC_PER_SEC) << tk->shift)) {
vdata->monotonic_time_snsec -=
((u64)NSEC_PER_SEC) << tk->shift;
vdata->monotonic_time_sec++;
}
vdata->wall_time_coarse.tv_sec = tk->xtime_sec;
vdata->wall_time_coarse.tv_nsec = (long)(tk->xtime_nsec >> tk->shift);
vdata->monotonic_time_coarse = timespec_add(vdata->wall_time_coarse,
tk->wall_to_monotonic);
write_seqcount_end(&vdata->seq);
}
static void warn_bad_vsyscall(const char *level, struct pt_regs *regs,
const char *message)
{
......@@ -374,7 +330,6 @@ void __init map_vsyscall(void)
{
extern char __vsyscall_page;
unsigned long physaddr_vsyscall = __pa_symbol(&__vsyscall_page);
extern char __vvar_page;
unsigned long physaddr_vvar_page = __pa_symbol(&__vvar_page);
__set_fixmap(VSYSCALL_FIRST_PAGE, physaddr_vsyscall,
......
/*
* Copyright (C) 2001 Andrea Arcangeli <andrea@suse.de> SuSE
* Copyright 2003 Andi Kleen, SuSE Labs.
*
* Modified for x86 32 bit architecture by
* Stefani Seibold <stefani@seibold.net>
*
* Thanks to hpa@transmeta.com for some useful hint.
* Special thanks to Ingo Molnar for his early experience with
* a different vsyscall implementation for Linux/IA32 and for the name.
*
*/
#include <linux/timekeeper_internal.h>
#include <asm/vgtod.h>
DEFINE_VVAR(struct vsyscall_gtod_data, vsyscall_gtod_data);
void update_vsyscall_tz(void)
{
vsyscall_gtod_data.sys_tz = sys_tz;
}
void update_vsyscall(struct timekeeper *tk)
{
struct vsyscall_gtod_data *vdata = &vsyscall_gtod_data;
write_seqcount_begin(&vdata->seq);
/* copy vsyscall data */
vdata->clock.vclock_mode = tk->clock->archdata.vclock_mode;
vdata->clock.cycle_last = tk->clock->cycle_last;
vdata->clock.mask = tk->clock->mask;
vdata->clock.mult = tk->mult;
vdata->clock.shift = tk->shift;
vdata->wall_time_sec = tk->xtime_sec;
vdata->wall_time_snsec = tk->xtime_nsec;
vdata->monotonic_time_sec = tk->xtime_sec
+ tk->wall_to_monotonic.tv_sec;
vdata->monotonic_time_snsec = tk->xtime_nsec
+ (tk->wall_to_monotonic.tv_nsec
<< tk->shift);
while (vdata->monotonic_time_snsec >=
(((u64)NSEC_PER_SEC) << tk->shift)) {
vdata->monotonic_time_snsec -=
((u64)NSEC_PER_SEC) << tk->shift;
vdata->monotonic_time_sec++;
}
vdata->wall_time_coarse.tv_sec = tk->xtime_sec;
vdata->wall_time_coarse.tv_nsec = (long)(tk->xtime_nsec >> tk->shift);
vdata->monotonic_time_coarse = timespec_add(vdata->wall_time_coarse,
tk->wall_to_monotonic);
write_seqcount_end(&vdata->seq);
}
......@@ -69,8 +69,8 @@ static const char * const sym_regex_kernel[S_NSYMTYPES] = {
"__per_cpu_load|"
"init_per_cpu__.*|"
"__end_rodata_hpage_align|"
"__vvar_page|"
#endif
"__vvar_page|"
"_end)$"
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册