commit bacfa94b08027b9f66ede7044972e3b066766b3e upstream.

Commit c877154d fixed an uninitialized variable and optimized
the function to not call tnc_next() in the first iteration of the
loop. While this seemed perfectly legit and wise, it turned out to
be illegal.
If the lookup function does not find an exact match it will rewind
the cursor by 1.
The rewinded cursor will not match the name hash we are looking for
and this results in a spurious -ENOENT.
So we need to move to the next entry in case of an non-exact match,
but not if the match was exact.

While we are here, update the documentation to avoid further confusion.

Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: c877154d ("ubifs: Fix uninitialized variable in search_dh_cookie()")
Fixes: 781f675e ("ubifs: Fix unlink code wrt. double hash lookups")
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5ca2f54b597c816df54ff1b28eb99cf7262b955d upstream.

lineevent_create should not allow any of GPIOHANDLE_REQUEST_OUTPUT,
GPIOHANDLE_REQUEST_OPEN_DRAIN or GPIOHANDLE_REQUEST_OPEN_SOURCE to be set.

Fixes: d7c51b47 ("gpio: userspace ABI for reading/writing GPIO lines")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NKent Gibson <warthog618@gmail.com>
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2d2f4273cbe9058d1f5a518e5e880d27d7b3b30f upstream.

Commit 0e7df224 ("PCI: Add sysfs sriov_drivers_autoprobe to control
VF driver binding") introduced the sriov_drivers_autoprobe attribute
which allows users to prevent the kernel from automatically probing a
driver for new VFs as they are created.  This allows VFs to be spawned
without automatically binding the new device to a host driver, such as
in cases where the user intends to use the device only with a meta
driver like vfio-pci.  However, the current implementation prevents any
use of drivers_probe with the VF while sriov_drivers_autoprobe=0.  This
blocks the now current general practice of setting driver_override
followed by using drivers_probe to bind a device to a specified driver.

The kernel never automatically sets a driver_override therefore it seems
we can assume a driver_override reflects the intent of the user.  Also,
probing a device using a driver_override match seems outside the scope
of the 'auto' part of sriov_drivers_autoprobe.  Therefore, let's allow
driver_override matches regardless of sriov_drivers_autoprobe, which we
can do by simply testing if a driver_override is set for a device as a
'can probe' condition.

Fixes: 0e7df224 ("PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding")
Link: https://lore.kernel.org/lkml/155742996741.21878.569845487290798703.stgit@gimli.home
Link: https://lore.kernel.org/linux-pci/155672991496.20698.4279330795743262888.stgit@gimli.home/T/#uSigned-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 336d4b138be2dad372b67a2388e42805c48aaa38 upstream.

One main goal of the function mtk_nfc_update_ecc_stats is to check
whether sectors are all empty. If they are empty, set these sectors's
data buffer and OOB buffer as 0xff.

But now, the sector OOB buffer pointer is wrongly assigned. We always
do memset from sector 0.

To fix this issue, pass start sector number to make OOB buffer pointer
be properly assigned.

Fixes: 1d6b1e46 ("mtd: mediatek: driver for MTK Smart Device")
Signed-off-by: NXiaolei Li <xiaolei.li@mediatek.com>
Reviewed-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6943b839721ad4a31ad2bacf6e71b21f2dfe3134 upstream.

At boot time, my rk3288-veyron devices yell with 8 lines that look
like this:
  [    0.000000] rockchip_mmc_get_phase: invalid clk rate

This is because the clock framework at clk_register() time tries to
get the phase but we don't have a parent yet.

While the errors appear to be harmless they are still ugly and, in
general, we don't want yells like this in the log unless they are
important.

There's no real reason to be yelling here.  We can still return
-EINVAL to indicate that the phase makes no sense without a parent.
If someone really tries to do tuning and the clock is reported as 0
then we'll see the yells in rockchip_mmc_set_phase().

Fixes: 4bf59902 ("clk: rockchip: Prevent calculating mmc phase if clock rate is zero")
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5ffff4415f9eeae834960226770963e2947e17eb upstream.

Add missing XBGR8888 & ABGR8888 formats variants from the primary plane.

Fixes: bbbe775e ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NKevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190429075238.7884-1-narmstrong@baylibre.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6fbcdd59094ade30db63f32316e9502425d7b256 upstream.

Commit ddf35cf3 ("powerpc: Use barrier_nospec in copy_from_user()")
Added barrier_nospec before loading from user-controlled pointers. The
intention was to order the load from the potentially user-controlled
pointer vs a previous branch based on an access_ok() check or similar.

In order to achieve the same result, add a barrier_nospec to the
raw_copy_in_user() function before loading from such a user-controlled
pointer.

Fixes: ddf35cf3 ("powerpc: Use barrier_nospec in copy_from_user()")
Signed-off-by: NSuraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/purgatory: Change compiler flags from -mcmodel=kernel to -mcmodel=large to fix kexec relocation errors

commit e16c2983fba0fa6763e43ad10916be35e3d8dc05 upstream.

The last change to this Makefile caused relocation errors when loading
a kdump kernel.  Restore -mcmodel=large (not -mcmodel=kernel),
-ffreestanding, and -fno-zero-initialized-bsss, without reverting to
the former practice of resetting KBUILD_CFLAGS.

Purgatory.ro is a standalone binary that is not linked against the
rest of the kernel.  Its image is copied into an array that is linked
to the kernel, and from there kexec relocates it wherever it desires.

With the previous change to compiler flags, the error "kexec: Overflow
in relocation type 11 value 0x11fffd000" was encountered when trying
to load the crash kernel.  This is from kexec code trying to relocate
the purgatory.ro object.

From the error message, relocation type 11 is R_X86_64_32S.  The
x86_64 ABI says:

  "The R_X86_64_32 and R_X86_64_32S relocations truncate the
   computed value to 32-bits.  The linker must verify that the
   generated value for the R_X86_64_32 (R_X86_64_32S) relocation
   zero-extends (sign-extends) to the original 64-bit value."

This type of relocation doesn't work when kexec chooses to place the
purgatory binary in memory that is not reachable with 32 bit
addresses.

The compiler flag -mcmodel=kernel allows those type of relocations to
be emitted, so revert to using -mcmodel=large as was done before.

Also restore the -ffreestanding and -fno-zero-initialized-bss flags
because they are appropriate for a stand alone piece of object code
which doesn't explicitly zero the bss, and one other report has said
undefined symbols are encountered without -ffreestanding.

These identical compiler flag changes need to happen for every object
that becomes part of the purgatory.ro object, so gather them together
first into PURGATORY_CFLAGS_REMOVE and PURGATORY_CFLAGS, and then
apply them to each of the objects that have C source.  Do not apply
any of these flags to kexec-purgatory.o, which is not part of the
standalone object but part of the kernel proper.
Tested-by: NVaibhav Rustagi <vaibhavrustagi@google.com>
Tested-by: NAndreas Smas <andreas@lonelycoder.com>
Signed-off-by: NSteve Wahl <steve.wahl@hpe.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: None
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: clang-built-linux@googlegroups.com
Cc: dimitri.sivanich@hpe.com
Cc: mike.travis@hpe.com
Cc: russ.anderson@hpe.com
Fixes: b059f801a937 ("x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS")
Link: https://lkml.kernel.org/r/20190905202346.GA26595@swahl-linuxSigned-off-by: NIngo Molnar <mingo@kernel.org>
Cc: Andreas Smas <andreas@lonelycoder.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f7eea636c3d505fe6f1d1066234f1aaf7171b681 upstream.

The implementation of vmread to memory is still incomplete, as it
lacks the ability to do vmread to I/O memory just like vmptrst.

Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 541ab2aeb28251bf7135c7961f3a6080eebcc705 upstream.

Emulation of VMPTRST can incorrectly inject a page fault
when passed an operand that points to an MMIO address.
The page fault will use uninitialized kernel stack memory
as the CR2 and error code.

The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR
exit to userspace; however, it is not an easy fix, so for now just ensure
that the error code and CR2 are zero.
Signed-off-by: NFuqian Huang <huangfq.daxian@gmail.com>
Cc: stable@vger.kernel.org
[add comment]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 53936b5bf35e140ae27e4bbf0447a61063f400da upstream.

When the userspace program runs the KVM_S390_INTERRUPT ioctl to inject
an interrupt, we convert them from the legacy struct kvm_s390_interrupt
to the new struct kvm_s390_irq via the s390int_to_s390irq() function.
However, this function does not take care of all types of interrupts
that we can inject into the guest later (see do_inject_vcpu()). Since we
do not clear out the s390irq values before calling s390int_to_s390irq(),
there is a chance that we copy random data from the kernel stack which
could be leaked to the userspace later.

Specifically, the problem exists with the KVM_S390_INT_PFAULT_INIT
interrupt: s390int_to_s390irq() does not handle it, and the function
__inject_pfault_init() later copies irq->u.ext which contains the
random kernel stack data. This data can then be leaked either to
the guest memory in __deliver_pfault_init(), or the userspace might
retrieve it directly with the KVM_S390_GET_IRQ_STATE ioctl.

Fix it by handling that interrupt type in s390int_to_s390irq(), too,
and by making sure that the s390irq struct is properly pre-initialized.
And while we're at it, make sure that s390int_to_s390irq() now
directly returns -EINVAL for unknown interrupt types, so that we
immediately get a proper error code in case we add more interrupt
types to do_inject_vcpu() without updating s390int_to_s390irq()
sometime in the future.

Cc: stable@vger.kernel.org
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NJanosch Frank <frankja@linux.ibm.com>
Signed-off-by: NThomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/kvm/20190912115438.25761-1-thuth@redhat.comSigned-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 13a17cc0526f08d1df9507f7484176371cd263a0 upstream.

If userspace doesn't set KVM_MEM_LOG_DIRTY_PAGES on memslot before calling
kvm_s390_vm_start_migration(), kernel will oops with:

  Unable to handle kernel pointer dereference in virtual kernel address space
  Failing address: 0000000000000000 TEID: 0000000000000483
  Fault in home space mode while using kernel ASCE.
  AS:0000000002a2000b R2:00000001bff8c00b R3:00000001bff88007 S:00000001bff91000 P:000000000000003d
  Oops: 0004 ilc:2 [#1] SMP
  ...
  Call Trace:
  ([<001fffff804ec552>] kvm_s390_vm_set_attr+0x347a/0x3828 [kvm])
   [<001fffff804ecfc0>] kvm_arch_vm_ioctl+0x6c0/0x1998 [kvm]
   [<001fffff804b67e4>] kvm_vm_ioctl+0x51c/0x11a8 [kvm]
   [<00000000008ba572>] do_vfs_ioctl+0x1d2/0xe58
   [<00000000008bb284>] ksys_ioctl+0x8c/0xb8
   [<00000000008bb2e2>] sys_ioctl+0x32/0x40
   [<000000000175552c>] system_call+0x2b8/0x2d8
  INFO: lockdep is turned off.
  Last Breaking-Event-Address:
   [<0000000000dbaf60>] __memset+0xc/0xa0

due to ms->dirty_bitmap being NULL, which might crash the host.

Make sure that ms->dirty_bitmap is set before using it or
return -EINVAL otherwise.

Cc: <stable@vger.kernel.org>
Fixes: afdad616 ("KVM: s390: Fix storage attributes migration with memory slots")
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Link: https://lore.kernel.org/kvm/20190911075218.29153-1-imammedo@redhat.com/Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NClaudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NJanosch Frank <frankja@linux.ibm.com>
Signed-off-by: NJanosch Frank <frankja@linux.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit eddf3e9c7c7e4d0707c68d1bb22cc6ec8aef7d4a upstream.

The following crash was observed:

  Unable to handle kernel NULL pointer dereference at 0000000000000158
  Internal error: Oops: 96000004 [#1] SMP
  pc : resend_irqs+0x68/0xb0
  lr : resend_irqs+0x64/0xb0
  ...
  Call trace:
   resend_irqs+0x68/0xb0
   tasklet_action_common.isra.6+0x84/0x138
   tasklet_action+0x2c/0x38
   __do_softirq+0x120/0x324
   run_ksoftirqd+0x44/0x60
   smpboot_thread_fn+0x1ac/0x1e8
   kthread+0x134/0x138
   ret_from_fork+0x10/0x18

The reason for this is that the interrupt resend mechanism happens in soft
interrupt context, which is a asynchronous mechanism versus other
operations on interrupts. free_irq() does not take resend handling into
account. Thus, the irq descriptor might be already freed before the resend
tasklet is executed. resend_irqs() does not check the return value of the
interrupt descriptor lookup and derefences the return value
unconditionally.

  1):
  __setup_irq
    irq_startup
      check_irq_resend  // activate softirq to handle resend irq
  2):
  irq_domain_free_irqs
    irq_free_descs
      free_desc
        call_rcu(&desc->rcu, delayed_free_desc)
  3):
  __do_softirq
    tasklet_action
      resend_irqs
        desc = irq_to_desc(irq)
        desc->handle_irq(desc)  // desc is NULL --> Ooops

Fix this by adding a NULL pointer check in resend_irqs() before derefencing
the irq descriptor.

Fixes: a4633adc ("[PATCH] genirq: add genirq sw IRQ-retrigger")
Signed-off-by: NYunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NZhiqiang Liu <liuzhiqiang26@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1630ae13-5c8e-901e-de09-e740b6a426a7@huawei.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 377228accbbb8b9738f615d791aa803f41c067e0 upstream.

There were a couple cases where the ITR value generated via the adaptive
ITR scheme could exceed 126. This resulted in the value becoming either 0
or something less than 10. Switching back and forth between a value less
than 10 and a value greater than 10 can cause issues as certain hardware
features such as RSC to not function well when the ITR value has dropped
that low.

CC: stable@vger.kernel.org
Fixes: b4ded832 ("ixgbe: Update adaptive ITR algorithm")
Reported-by: NGregg Leventhal <gleventhal@janestreet.com>
Signed-off-by: NAlexander Duyck <alexander.h.duyck@linux.intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 410f954cb1d1c79ae485dd83a175f21954fd87cd upstream.

Sometimes when fsync'ing a file we need to log that other inodes exist and
when we need to do that we acquire a reference on the inodes and then drop
that reference using iput() after logging them.

That generally is not a problem except if we end up doing the final iput()
(dropping the last reference) on the inode and that inode has a link count
of 0, which can happen in a very short time window if the logging path
gets a reference on the inode while it's being unlinked.

In that case we end up getting the eviction callback, btrfs_evict_inode(),
invoked through the iput() call chain which needs to drop all of the
inode's items from its subvolume btree, and in order to do that, it needs
to join a transaction at the helper function evict_refill_and_join().
However because the task previously started a transaction at the fsync
handler, btrfs_sync_file(), it has current->journal_info already pointing
to a transaction handle and therefore evict_refill_and_join() will get
that transaction handle from btrfs_join_transaction(). From this point on,
two different problems can happen:

1) evict_refill_and_join() will often change the transaction handle's
   block reserve (->block_rsv) and set its ->bytes_reserved field to a
   value greater than 0. If evict_refill_and_join() never commits the
   transaction, the eviction handler ends up decreasing the reference
   count (->use_count) of the transaction handle through the call to
   btrfs_end_transaction(), and after that point we have a transaction
   handle with a NULL ->block_rsv (which is the value prior to the
   transaction join from evict_refill_and_join()) and a ->bytes_reserved
   value greater than 0. If after the eviction/iput completes the inode
   logging path hits an error or it decides that it must fallback to a
   transaction commit, the btrfs fsync handle, btrfs_sync_file(), gets a
   non-zero value from btrfs_log_dentry_safe(), and because of that
   non-zero value it tries to commit the transaction using a handle with
   a NULL ->block_rsv and a non-zero ->bytes_reserved value. This makes
   the transaction commit hit an assertion failure at
   btrfs_trans_release_metadata() because ->bytes_reserved is not zero but
   the ->block_rsv is NULL. The produced stack trace for that is like the
   following:

   [192922.917158] assertion failed: !trans->bytes_reserved, file: fs/btrfs/transaction.c, line: 816
   [192922.917553] ------------[ cut here ]------------
   [192922.917922] kernel BUG at fs/btrfs/ctree.h:3532!
   [192922.918310] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
   [192922.918666] CPU: 2 PID: 883 Comm: fsstress Tainted: G        W         5.1.4-btrfs-next-47 #1
   [192922.919035] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
   [192922.919801] RIP: 0010:assfail.constprop.25+0x18/0x1a [btrfs]
   (...)
   [192922.920925] RSP: 0018:ffffaebdc8a27da8 EFLAGS: 00010286
   [192922.921315] RAX: 0000000000000051 RBX: ffff95c9c16a41c0 RCX: 0000000000000000
   [192922.921692] RDX: 0000000000000000 RSI: ffff95cab6b16838 RDI: ffff95cab6b16838
   [192922.922066] RBP: ffff95c9c16a41c0 R08: 0000000000000000 R09: 0000000000000000
   [192922.922442] R10: ffffaebdc8a27e70 R11: 0000000000000000 R12: ffff95ca731a0980
   [192922.922820] R13: 0000000000000000 R14: ffff95ca84c73338 R15: ffff95ca731a0ea8
   [192922.923200] FS:  00007f337eda4e80(0000) GS:ffff95cab6b00000(0000) knlGS:0000000000000000
   [192922.923579] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
   [192922.923948] CR2: 00007f337edad000 CR3: 00000001e00f6002 CR4: 00000000003606e0
   [192922.924329] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
   [192922.924711] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
   [192922.925105] Call Trace:
   [192922.925505]  btrfs_trans_release_metadata+0x10c/0x170 [btrfs]
   [192922.925911]  btrfs_commit_transaction+0x3e/0xaf0 [btrfs]
   [192922.926324]  btrfs_sync_file+0x44c/0x490 [btrfs]
   [192922.926731]  do_fsync+0x38/0x60
   [192922.927138]  __x64_sys_fdatasync+0x13/0x20
   [192922.927543]  do_syscall_64+0x60/0x1c0
   [192922.927939]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
   (...)
   [192922.934077] ---[ end trace f00808b12068168f ]---

2) If evict_refill_and_join() decides to commit the transaction, it will
   be able to do it, since the nested transaction join only increments the
   transaction handle's ->use_count reference counter and it does not
   prevent the transaction from getting committed. This means that after
   eviction completes, the fsync logging path will be using a transaction
   handle that refers to an already committed transaction. What happens
   when using such a stale transaction can be unpredictable, we are at
   least having a use-after-free on the transaction handle itself, since
   the transaction commit will call kmem_cache_free() against the handle
   regardless of its ->use_count value, or we can end up silently losing
   all the updates to the log tree after that iput() in the logging path,
   or using a transaction handle that in the meanwhile was allocated to
   another task for a new transaction, etc, pretty much unpredictable
   what can happen.

In order to fix both of them, instead of using iput() during logging, use
btrfs_add_delayed_iput(), so that the logging path of fsync never drops
the last reference on an inode, that step is offloaded to a safe context
(usually the cleaner kthread).

The assertion failure issue was sporadically triggered by the test case
generic/475 from fstests, which loads the dm error target while fsstress
is running, which lead to fsync failing while logging inodes with -EIO
errors and then trying later to commit the transaction, triggering the
assertion failure.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e95fbc130a162ba9ad956311b95aa0da269eea48 upstream.

linehandle_create should not allow both GPIOHANDLE_REQUEST_INPUT
and GPIOHANDLE_REQUEST_OUTPUT to be set.

Fixes: d7c51b47 ("gpio: userspace ABI for reading/writing GPIO lines")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NKent Gibson <warthog618@gmail.com>
Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 61f7f7c8f978b1c0d80e43c83b7d110ca0496eb4 upstream.

Another day; another DSDT bug we need to workaround...

Since commit ca876c74 ("gpiolib-acpi: make sure we trigger edge events
at least once on boot") we call _AEI edge handlers at boot.

In some rare cases this causes problems. One example of this is the Minix
Neo Z83-4 mini PC, this device has a clear DSDT bug where it has some copy
and pasted code for dealing with Micro USB-B connector host/device role
switching, while the mini PC does not even have a micro-USB connector.
This code, which should not be there, messes with the DDC data pin from
the HDMI connector (switching it to GPIO mode) breaking HDMI support.

To avoid problems like this, this commit adds a new
gpiolib_acpi.run_edge_events_on_boot kernel commandline option, which
allows disabling the running of _AEI edge event handlers at boot.

The default value is -1/auto which uses a DMI based blacklist, the initial
version of this blacklist contains the Neo Z83-4 fixing the HDMI breakage.

Cc: stable@vger.kernel.org
Cc: Daniel Drake <drake@endlessm.com>
Cc: Ian W MORRISON <ianwmorrison@gmail.com>
Reported-by: NIan W MORRISON <ianwmorrison@gmail.com>
Suggested-by: NIan W MORRISON <ianwmorrison@gmail.com>
Fixes: ca876c74 ("gpiolib-acpi: make sure we trigger edge events at least once on boot")
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20190827202835.213456-1-hdegoede@redhat.comAcked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: NIan W MORRISON <ianwmorrison@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 77f22f92dff8e7b45c7786a430626d38071d4670 ]

I got a UAF repport in tun driver when doing fuzzy test:

[  466.269490] ==================================================================
[  466.271792] BUG: KASAN: use-after-free in tun_chr_read_iter+0x2ca/0x2d0
[  466.271806] Read of size 8 at addr ffff888372139250 by task tun-test/2699
[  466.271810]
[  466.271824] CPU: 1 PID: 2699 Comm: tun-test Not tainted 5.3.0-rc1-00001-g5a9433db2614-dirty #427
[  466.271833] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[  466.271838] Call Trace:
[  466.271858]  dump_stack+0xca/0x13e
[  466.271871]  ? tun_chr_read_iter+0x2ca/0x2d0
[  466.271890]  print_address_description+0x79/0x440
[  466.271906]  ? vprintk_func+0x5e/0xf0
[  466.271920]  ? tun_chr_read_iter+0x2ca/0x2d0
[  466.271935]  __kasan_report+0x15c/0x1df
[  466.271958]  ? tun_chr_read_iter+0x2ca/0x2d0
[  466.271976]  kasan_report+0xe/0x20
[  466.271987]  tun_chr_read_iter+0x2ca/0x2d0
[  466.272013]  do_iter_readv_writev+0x4b7/0x740
[  466.272032]  ? default_llseek+0x2d0/0x2d0
[  466.272072]  do_iter_read+0x1c5/0x5e0
[  466.272110]  vfs_readv+0x108/0x180
[  466.299007]  ? compat_rw_copy_check_uvector+0x440/0x440
[  466.299020]  ? fsnotify+0x888/0xd50
[  466.299040]  ? __fsnotify_parent+0xd0/0x350
[  466.299064]  ? fsnotify_first_mark+0x1e0/0x1e0
[  466.304548]  ? vfs_write+0x264/0x510
[  466.304569]  ? ksys_write+0x101/0x210
[  466.304591]  ? do_preadv+0x116/0x1a0
[  466.304609]  do_preadv+0x116/0x1a0
[  466.309829]  do_syscall_64+0xc8/0x600
[  466.309849]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  466.309861] RIP: 0033:0x4560f9
[  466.309875] Code: 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
[  466.309889] RSP: 002b:00007ffffa5166e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000127
[  466.322992] RAX: ffffffffffffffda RBX: 0000000000400460 RCX: 00000000004560f9
[  466.322999] RDX: 0000000000000003 RSI: 00000000200008c0 RDI: 0000000000000003
[  466.323007] RBP: 00007ffffa516700 R08: 0000000000000004 R09: 0000000000000000
[  466.323014] R10: 0000000000000000 R11: 0000000000000206 R12: 000000000040cb10
[  466.323021] R13: 0000000000000000 R14: 00000000006d7018 R15: 0000000000000000
[  466.323057]
[  466.323064] Allocated by task 2605:
[  466.335165]  save_stack+0x19/0x80
[  466.336240]  __kasan_kmalloc.constprop.8+0xa0/0xd0
[  466.337755]  kmem_cache_alloc+0xe8/0x320
[  466.339050]  getname_flags+0xca/0x560
[  466.340229]  user_path_at_empty+0x2c/0x50
[  466.341508]  vfs_statx+0xe6/0x190
[  466.342619]  __do_sys_newstat+0x81/0x100
[  466.343908]  do_syscall_64+0xc8/0x600
[  466.345303]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  466.347034]
[  466.347517] Freed by task 2605:
[  466.348471]  save_stack+0x19/0x80
[  466.349476]  __kasan_slab_free+0x12e/0x180
[  466.350726]  kmem_cache_free+0xc8/0x430
[  466.351874]  putname+0xe2/0x120
[  466.352921]  filename_lookup+0x257/0x3e0
[  466.354319]  vfs_statx+0xe6/0x190
[  466.355498]  __do_sys_newstat+0x81/0x100
[  466.356889]  do_syscall_64+0xc8/0x600
[  466.358037]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  466.359567]
[  466.360050] The buggy address belongs to the object at ffff888372139100
[  466.360050]  which belongs to the cache names_cache of size 4096
[  466.363735] The buggy address is located 336 bytes inside of
[  466.363735]  4096-byte region [ffff888372139100, ffff88837213a100)
[  466.367179] The buggy address belongs to the page:
[  466.368604] page:ffffea000dc84e00 refcount:1 mapcount:0 mapping:ffff8883df1b4f00 index:0x0 compound_mapcount: 0
[  466.371582] flags: 0x2fffff80010200(slab|head)
[  466.372910] raw: 002fffff80010200 dead000000000100 dead000000000122 ffff8883df1b4f00
[  466.375209] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
[  466.377778] page dumped because: kasan: bad access detected
[  466.379730]
[  466.380288] Memory state around the buggy address:
[  466.381844]  ffff888372139100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.384009]  ffff888372139180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.386131] >ffff888372139200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.388257]                                                  ^
[  466.390234]  ffff888372139280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.392512]  ffff888372139300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.394667] ==================================================================

tun_chr_read_iter() accessed the memory which freed by free_netdev()
called by tun_set_iff():

        CPUA                                           CPUB
  tun_set_iff()
    alloc_netdev_mqs()
    tun_attach()
                                                  tun_chr_read_iter()
                                                    tun_get()
                                                    tun_do_read()
                                                      tun_ring_recv()
    register_netdevice() <-- inject error
    goto err_detach
    tun_detach_all() <-- set RCV_SHUTDOWN
    free_netdev() <-- called from
                     err_free_dev path
      netdev_freemem() <-- free the memory
                        without check refcount
      (In this path, the refcount cannot prevent
       freeing the memory of dev, and the memory
       will be used by dev_put() called by
       tun_chr_read_iter() on CPUB.)
                                                     (Break from tun_ring_recv(),
                                                     because RCV_SHUTDOWN is set)
                                                   tun_put()
                                                     dev_put() <-- use the memory
                                                                   freed by netdev_freemem()

Put the publishing of tfile->tun after register_netdevice(),
so tun_get() won't get the tun pointer that freed by
err_detach path if register_netdevice() failed.

Fixes: eb0fb363 ("tuntap: attach queue 0 before registering netdevice")
Reported-by: NHulk Robot <hulkci@huawei.com>
Suggested-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 42dec1dbe38239cf91cc1f4df7830c66276ced37 ]

Unlike kfree(p), kfree_rcu(p, rcu) won't do NULL pointer check. When
tipc_nametbl_remove_publ returns NULL, the panic below happens:

   BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
   RIP: 0010:__call_rcu+0x1d/0x290
   Call Trace:
    <IRQ>
    tipc_publ_notify+0xa9/0x170 [tipc]
    tipc_node_write_unlock+0x8d/0x100 [tipc]
    tipc_node_link_down+0xae/0x1d0 [tipc]
    tipc_node_check_dest+0x3ea/0x8f0 [tipc]
    ? tipc_disc_rcv+0x2c7/0x430 [tipc]
    tipc_disc_rcv+0x2c7/0x430 [tipc]
    ? tipc_rcv+0x6bb/0xf20 [tipc]
    tipc_rcv+0x6bb/0xf20 [tipc]
    ? ip_route_input_slow+0x9cf/0xb10
    tipc_udp_recv+0x195/0x1e0 [tipc]
    ? tipc_udp_is_known_peer+0x80/0x80 [tipc]
    udp_queue_rcv_skb+0x180/0x460
    udp_unicast_rcv_skb.isra.56+0x75/0x90
    __udp4_lib_rcv+0x4ce/0xb90
    ip_local_deliver_finish+0x11c/0x210
    ip_local_deliver+0x6b/0xe0
    ? ip_rcv_finish+0xa9/0x410
    ip_rcv+0x273/0x362

Fixes: 97ede29e ("tipc: convert name table read-write lock to RCU")
Reported-by: NLi Shuang <shuali@redhat.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit af38d07ed391b21f7405fa1f936ca9686787d6d2 ]

Fix tcp_ecn_withdraw_cwr() to clear the correct bit:
TCP_ECN_QUEUE_CWR.

Rationale: basically, TCP_ECN_DEMAND_CWR is a bit that is purely about
the behavior of data receivers, and deciding whether to reflect
incoming IP ECN CE marks as outgoing TCP th->ece marks. The
TCP_ECN_QUEUE_CWR bit is purely about the behavior of data senders,
and deciding whether to send CWR. The tcp_ecn_withdraw_cwr() function
is only called from tcp_undo_cwnd_reduction() by data senders during
an undo, so it should zero the sender-side state,
TCP_ECN_QUEUE_CWR. It does not make sense to stop the reflection of
incoming CE bits on incoming data packets just because outgoing
packets were spuriously retransmitted.

The bug has been reproduced with packetdrill to manifest in a scenario
with RFC3168 ECN, with an incoming data packet with CE bit set and
carrying a TCP timestamp value that causes cwnd undo. Before this fix,
the IP CE bit was ignored and not reflected in the TCP ECE header bit,
and sender sent a TCP CWR ('W') bit on the next outgoing data packet,
even though the cwnd reduction had been undone.  After this fix, the
sender properly reflects the CE bit and does not set the W bit.

Note: the bug actually predates 2005 git history; this Fixes footer is
chosen to be the oldest SHA1 I have tested (from Sep 2007) for which
the patch applies cleanly (since before this commit the code was in a
.h file).

Fixes: bdf1ee5d ("[TCP]: Move code from tcp_ecn.h to tcp*.c and tcp.h & remove it")
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Acked-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 10eb56c582c557c629271f1ee31e15e7a9b2558b ]

Transport should use its own pf_retrans to do the error_count
check, instead of asoc's. Otherwise, it's meaningless to make
pf_retrans per transport.

Fixes: 5aa93bcf ("sctp: Implement quick failover draft from tsvwg")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b456d72412ca8797234449c25815e82f4e1426c0 ]

The '.exit' functions from 'pernet_operations' structure should be marked
as __net_exit, not __net_init.

Fixes: 8e2d61e0 ("sctp: fix race on protocol/netns initialization")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d4d6ec6dac07f263f06d847d6f732d6855522845 ]

In case of TCA_HHF_NON_HH_WEIGHT or TCA_HHF_QUANTUM is zero,
it would make no progress inside the loop in hhf_dequeue() thus
kernel would get stuck.

Fix this by checking this corner case in hhf_change().

Fixes: 10239edf ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
Reported-by: syzbot+bc6297c11f19ee807dc2@syzkaller.appspotmail.com
Reported-by: syzbot+041483004a7f45f1f20a@syzkaller.appspotmail.com
Reported-by: syzbot+55be5f513bed37fc4367@syzkaller.appspotmail.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Terry Lam <vtlam@google.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b88dd52c62bb5c5d58f0963287f41fd084352c57 ]

Whenever MQ is not used on a multiqueue device, we experience
serious reordering problems. Bisection found the cited
commit.

The issue can be described this way :

- A single qdisc hierarchy is shared by all transmit queues.
  (eg : tc qdisc replace dev eth0 root fq_codel)

- When/if try_bulk_dequeue_skb_slow() dequeues a packet targetting
  a different transmit queue than the one used to build a packet train,
  we stop building the current list and save the 'bad' skb (P1) in a
  special queue. (bad_txq)

- When dequeue_skb() calls qdisc_dequeue_skb_bad_txq() and finds this
  skb (P1), it checks if the associated transmit queues is still in frozen
  state. If the queue is still blocked (by BQL or NIC tx ring full),
  we leave the skb in bad_txq and return NULL.

- dequeue_skb() calls q->dequeue() to get another packet (P2)

  The other packet can target the problematic queue (that we found
  in frozen state for the bad_txq packet), but another cpu just ran
  TX completion and made room in the txq that is now ready to accept
  new packets.

- Packet P2 is sent while P1 is still held in bad_txq, P1 might be sent
  at next round. In practice P2 is the lead of a big packet train
  (P2,P3,P4 ...) filling the BQL budget and delaying P1 by many packets :/

To solve this problem, we have to block the dequeue process as long
as the first packet in bad_txq can not be sent. Reordering issues
disappear and no side effects have been seen.

Fixes: a53851e2 ("net: sched: explicit locking in gso_cpu fallback")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Acked-by: NJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 63b2ed4e10b2e6c913e1d8cdd728e7fba4115a3d ]

Regarding to IEEE 802.3-2015 standard section 2
28B.3 Priority resolution - Table 28-3 - Pause resolution

In case of Local device Pause=1 AsymDir=0, Link partner
Pause=1 AsymDir=1, Local device resolution should be enable PAUSE
transmit, disable PAUSE receive.
And in case of Local device Pause=1 AsymDir=1, Link partner
Pause=1 AsymDir=0, Local device resolution should be enable PAUSE
receive, disable PAUSE transmit.

Fixes: 9525ae83 ("phylink: add phylink infrastructure")
Signed-off-by: NStefan Chulski <stefanc@marvell.com>
Reported-by: NShaul Ben-Mayor <shaulb@marvell.com>
Acked-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3dcbdb134f329842a38f0e6797191b885ab00a00 ]

Historically, support for frag_list packets entering skb_segment() was
limited to frag_list members terminating on exact same gso_size
boundaries. This is verified with a BUG_ON since commit 89319d38
("net: Add frag_list support to skb_segment"), quote:

    As such we require all frag_list members terminate on exact MSS
    boundaries.  This is checked using BUG_ON.
    As there should only be one producer in the kernel of such packets,
    namely GRO, this requirement should not be difficult to maintain.

However, since commit 6578171a ("bpf: add bpf_skb_change_proto helper"),
the "exact MSS boundaries" assumption no longer holds:
An eBPF program using bpf_skb_change_proto() DOES modify 'gso_size', but
leaves the frag_list members as originally merged by GRO with the
original 'gso_size'. Example of such programs are bpf-based NAT46 or
NAT64.

This lead to a kernel BUG_ON for flows involving:
 - GRO generating a frag_list skb
 - bpf program performing bpf_skb_change_proto() or bpf_skb_adjust_room()
 - skb_segment() of the skb

See example BUG_ON reports in [0].

In commit 13acc94e ("net: permit skb_segment on head_frag frag_list skb"),
skb_segment() was modified to support the "gso_size mangling" case of
a frag_list GRO'ed skb, but *only* for frag_list members having
head_frag==true (having a page-fragment head).

Alas, GRO packets having frag_list members with a linear kmalloced head
(head_frag==false) still hit the BUG_ON.

This commit adds support to skb_segment() for a 'head_skb' packet having
a frag_list whose members are *non* head_frag, with gso_size mangled, by
disabling SG and thus falling-back to copying the data from the given
'head_skb' into the generated segmented skbs - as suggested by Willem de
Bruijn [1].

Since this approach involves the penalty of skb_copy_and_csum_bits()
when building the segments, care was taken in order to enable this
solution only when required:
 - untrusted gso_size, by testing SKB_GSO_DODGY is set
   (SKB_GSO_DODGY is set by any gso_size mangling functions in
    net/core/filter.c)
 - the frag_list is non empty, its item is a non head_frag, *and* the
   headlen of the given 'head_skb' does not match the gso_size.

[0]
https://lore.kernel.org/netdev/20190826170724.25ff616f@pixies/
https://lore.kernel.org/netdev/9265b93f-253d-6b8c-f2b8-4b54eff1835c@fb.com/

[1]
https://lore.kernel.org/netdev/CA+FuTSfVsgNDi7c=GUU8nMg2hWxF2SjCNLXetHeVPdnxAW5K-w@mail.gmail.com/

Fixes: 6578171a ("bpf: add bpf_skb_change_proto helper")
Suggested-by: NWillem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: NShmulik Ladkani <shmulik.ladkani@gmail.com>
Reviewed-by: NWillem de Bruijn <willemb@google.com>
Reviewed-by: NAlexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 10cc514f451a0f239aa34f91bc9dc954a9397840 ]

In event of failure during register_netdevice, free_netdev is
invoked immediately. free_netdev assumes that all the netdevice
refcounts have been dropped prior to it being called and as a
result frees and clears out the refcount pointer.

However, this is not necessarily true as some of the operations
in the NETDEV_UNREGISTER notifier handlers queue RCU callbacks for
invocation after a grace period. The IPv4 callback in_dev_rcu_put
tries to access the refcount after free_netdev is called which
leads to a null de-reference-

44837.761523:   <6> Unable to handle kernel paging request at
                    virtual address 0000004a88287000
44837.761651:   <2> pc : in_dev_finish_destroy+0x4c/0xc8
44837.761654:   <2> lr : in_dev_finish_destroy+0x2c/0xc8
44837.762393:   <2> Call trace:
44837.762398:   <2>  in_dev_finish_destroy+0x4c/0xc8
44837.762404:   <2>  in_dev_rcu_put+0x24/0x30
44837.762412:   <2>  rcu_nocb_kthread+0x43c/0x468
44837.762418:   <2>  kthread+0x118/0x128
44837.762424:   <2>  ret_from_fork+0x10/0x1c

Fix this by waiting for the completion of the call_rcu() in
case of register_netdevice errors.

Fixes: 93ee31f1 ("[NET]: Fix free_netdev on register_netdev failure.")
Cc: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f39b683d35dfa93a58f1b400a8ec0ff81296b37c ]

The ixgbe driver currently does IPsec TX offloading
based on an existing secpath. However, the secpath
can also come from the RX side, in this case it is
misinterpreted for TX offload and the packets are
dropped with a "bad sa_idx" error. Fix this by using
the xfrm_offload() function to test for TX offload.

Fixes: 59259470 ("ixgbe: process the Tx ipsec offload")
Reported-by: NMichael Marley <michael@michaelmarley.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fe163e534e5eecdfd7b5920b0dfd24c458ee85d6 ]

syzbot reported:

    BUG: KMSAN: uninit-value in capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700
    CPU: 0 PID: 10025 Comm: syz-executor379 Not tainted 4.20.0-rc7+ #2
    Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
    Call Trace:
      __dump_stack lib/dump_stack.c:77 [inline]
      dump_stack+0x173/0x1d0 lib/dump_stack.c:113
      kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613
      __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313
      capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700
      do_loop_readv_writev fs/read_write.c:703 [inline]
      do_iter_write+0x83e/0xd80 fs/read_write.c:961
      vfs_writev fs/read_write.c:1004 [inline]
      do_writev+0x397/0x840 fs/read_write.c:1039
      __do_sys_writev fs/read_write.c:1112 [inline]
      __se_sys_writev+0x9b/0xb0 fs/read_write.c:1109
      __x64_sys_writev+0x4a/0x70 fs/read_write.c:1109
      do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
      entry_SYSCALL_64_after_hwframe+0x63/0xe7
    [...]

The problem is that capi_write() is reading past the end of the message.
Fix it by checking the message's length in the needed places.

Reported-and-tested-by: syzbot+0849c524d9c634f5ae66@syzkaller.appspotmail.com
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d23dbc479a8e813db4161a695d67da0e36557846 ]

The '.exit' functions from 'pernet_operations' structure should be marked
as __net_exit, not __net_init.

Fixes: d862e546 ("net: ipv6: Implement /proc/net/icmp6.")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4d7ffcf3bf1be98d876c570cab8fc31d9fa92725 ]

A Mediatek based smartphone owner reports problems with USB
tethering in Linux.  The verbose USB listing shows a rndis_host
interface pair (e0/01/03 + 10/00/00), but the driver fails to
bind with

[  355.960428] usb 1-4: bad CDC descriptors

The problem is a failsafe test intended to filter out ACM serial
functions using the same 02/02/ff class/subclass/protocol as RNDIS.
The serial functions are recognized by their non-zero bmCapabilities.

No RNDIS function with non-zero bmCapabilities were known at the time
this failsafe was added. But it turns out that some Wireless class
RNDIS functions are using the bmCapabilities field. These functions
are uniquely identified as RNDIS by their class/subclass/protocol, so
the failing test can safely be disabled.  The same applies to the two
types of Misc class RNDIS functions.

Applying the failsafe to Communication class functions only retains
the original functionality, and fixes the problem for the Mediatek based
smartphone.

Tow examples of CDC functional descriptors with non-zero bmCapabilities
from Wireless class RNDIS functions are:

0e8d:000a  Mediatek Crosscall Spider X5 3G Phone

      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x0f
          connection notifications
          sends break
          line coding and serial state
          get/set/clear comm features
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1

and

19d2:1023  ZTE K4201-z

      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1

The Mediatek example is believed to apply to most smartphones with
Mediatek firmware.  The ZTE example is most likely also part of a larger
family of devices/firmwares.
Suggested-by: NLars Melin <larsm17@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 94a72b3f024fc7e9ab640897a1e38583a470659d ]

NLM_F_MULTI must be used only when a NLMSG_DONE message is sent at the end.
In fact, NLMSG_DONE is sent only at the end of a dump.

Libraries like libnl will wait forever for NLMSG_DONE.

Fixes: 949f1e39 ("bridge: mdb: notify on router port add and del")
CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 060423bfdee3f8bc6e2c1bac97de24d5415e2bc4 upstream.

The code assumes log_num < in_num everywhere, and that is true as long as
in_num is incremented by descriptor iov count, and log_num by 1. However
this breaks if there's a zero sized descriptor.

As a result, if a malicious guest creates a vring desc with desc.len = 0,
it may cause the host kernel to crash by overflowing the log array. This
bug can be triggered during the VM migration.

There's no need to log when desc.len = 0, so just don't increment log_num
in this case.

Fixes: 3a4d5c94 ("vhost_net: a kernel-level virtio server")
Cc: stable@vger.kernel.org
Reviewed-by: NLidong Chen <lidongchen@tencent.com>
Signed-off-by: Nruippan <ruippan@tencent.com>
Signed-off-by: Nyongduan <yongduan@tencent.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NTyler Hicks <tyhicks@canonical.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a8318c13e79badb92bc6640704a64cc022a6eb97 ]

When in userspace and MSR FP=0 the hardware FP state is unrelated to
the current process. This is extended for transactions where if tbegin
is run with FP=0, the hardware checkpoint FP state will also be
unrelated to the current process. Due to this, we need to ensure this
hardware checkpoint is updated with the correct state before we enable
FP for this process.

Unfortunately we get this wrong when returning to a process from a
hardware interrupt. A process that starts a transaction with FP=0 can
take an interrupt. When the kernel returns back to that process, we
change to FP=1 but with hardware checkpoint FP state not updated. If
this transaction is then rolled back, the FP registers now contain the
wrong state.

The process looks like this:
   Userspace:                      Kernel

               Start userspace
                with MSR FP=0 TM=1
                  < -----
   ...
   tbegin
   bne
               Hardware interrupt
                   ---- >
                                    <do_IRQ...>
                                    ....
                                    ret_from_except
                                      restore_math()
				        /* sees FP=0 */
                                        restore_fp()
                                          tm_active_with_fp()
					    /* sees FP=1 (Incorrect) */
                                          load_fp_state()
                                        FP = 0 -> 1
                  < -----
               Return to userspace
                 with MSR TM=1 FP=1
                 with junk in the FP TM checkpoint
   TM rollback
   reads FP junk

When returning from the hardware exception, tm_active_with_fp() is
incorrectly making restore_fp() call load_fp_state() which is setting
FP=1.

The fix is to remove tm_active_with_fp().

tm_active_with_fp() is attempting to handle the case where FP state
has been changed inside a transaction. In this case the checkpointed
and transactional FP state is different and hence we must restore the
FP state (ie. we can't do lazy FP restore inside a transaction that's
used FP). It's safe to remove tm_active_with_fp() as this case is
handled by restore_tm_state(). restore_tm_state() detects if FP has
been using inside a transaction and will set load_fp and call
restore_math() to ensure the FP state (checkpoint and transaction) is
restored.

This is a data integrity problem for the current process as the FP
registers are corrupted. It's also a security problem as the FP
registers from one process may be leaked to another.

Similarly for VMX.

A simple testcase to replicate this will be posted to
tools/testing/selftests/powerpc/tm/tm-poison.c

This fixes CVE-2019-15031.

Fixes: a7771176 ("powerpc: Don't enable FP/Altivec if not checkpointed")
Cc: stable@vger.kernel.org # 4.15+
Signed-off-by: NGustavo Romero <gromero@linux.ibm.com>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190904045529.23002-2-gromero@linux.vnet.ibm.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5c784c8414fba11b62e12439f11e109fb5751f38 ]

Currently msr_tm_active() is a wrapper around MSR_TM_ACTIVE() if
CONFIG_PPC_TRANSACTIONAL_MEM is set, or it is just a function that
returns false if CONFIG_PPC_TRANSACTIONAL_MEM is not set.

This function is not necessary, since MSR_TM_ACTIVE() just do the same and
could be used, removing the dualism and simplifying the code.

This patchset remove every instance of msr_tm_active() and replaced it
by MSR_TM_ACTIVE().
Signed-off-by: NBreno Leitao <leitao@debian.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ad54567ad5d8e938ee6cf02e4f3867f18835ae6e ]

quirk_reset_lenovo_thinkpad_50_nvgpu() resets NVIDIA GPUs to work around
an apparent BIOS defect.  It previously used pci_reset_function(), and
the available method was a bus reset, which was fine because there was
only one function on the bus.  After b516ea586d71 ("PCI: Enable NVIDIA
HDA controllers"), there are now two functions (the HDA controller and
the GPU itself) on the bus, so the reset fails.

Use pci_reset_bus() explicitly instead of pci_reset_function() since it's
OK to reset both devices.

[bhelgaas: commit log, add e0547c81bfcf]
Fixes: b516ea586d71 ("PCI: Enable NVIDIA HDA controllers")
Fixes: e0547c81bfcf ("PCI: Reset Lenovo ThinkPad P50 nvgpu at boot if necessary")
Link: https://lore.kernel.org/r/20190801220117.14952-1-lyude@redhat.comSigned-off-by: NLyude Paul <lyude@redhat.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NBen Skeggs <bskeggs@redhat.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Daniel Drake <drake@endlessm.com>
Cc: Aaron Plattner <aplattner@nvidia.com>
Cc: Peter Wu <peter@lekensteyn.nl>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Maik Freudenberg <hhfeuer@gmx.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fbbbbd2f28aec991f3fbc248df211550fbdfd58c ]

There are two cases where u32 variables n and err are being checked
for less than zero error values, the checks is always false because
the variables are not signed. Fix this by making the variables ints.

Addresses-Coverity: ("Unsigned compared against 0")
Fixes: 345c0dbf3a30 ("ext4: protect journal inode's blocks using block_validity")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 170417c8c7bb2cbbdd949bf5c443c0c8f24a203b ]

Commit 345c0dbf3a30 ("ext4: protect journal inode's blocks using
block_validity") failed to add an exception for the journal inode in
ext4_check_blockref(), which is the function used by ext4_get_branch()
for indirect blocks.  This caused attempts to read from the ext3-style
journals to fail with:

[  848.968550] EXT4-fs error (device sdb7): ext4_get_branch:171: inode #8: block 30343695: comm jbd2/sdb7-8: invalid block

Fix this by adding the missing exception check.

Fixes: 345c0dbf3a30 ("ext4: protect journal inode's blocks using block_validity")
Reported-by: NArthur Marsh <arthur.marsh@internode.on.net>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0a944e8a6c66ca04c7afbaa17e22bf208a8b37f0 ]

Since the journal inode is already checked when we added it to the
block validity's system zone, if we check it again, we'll just trigger
a failure.

This was causing failures like this:

[   53.897001] EXT4-fs error (device sda): ext4_find_extent:909: inode
#8: comm jbd2/sda-8: pblk 121667583 bad header/extent: invalid extent entries - magic f30a, entries 8, max 340(340), depth 0(0)
[   53.931430] jbd2_journal_bmap: journal block not found at offset 49 on sda-8
[   53.938480] Aborting journal on device sda-8.

... but only if the system was under enough memory pressure that
logical->physical mapping for the journal inode gets pushed out of the
extent cache.  (This is why it wasn't noticed earlier.)

Fixes: 345c0dbf3a30 ("ext4: protect journal inode's blocks using block_validity")
Reported-by: NDan Rue <dan.rue@linaro.org>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Tested-by: NNaresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>