- 13 5月, 2011 3 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
It is not really used for anything. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
To make it easier to read. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
And also make them uniform and prefix the message with 'xen-blkback'. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 12 5月, 2011 1 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
Suggested-by: NIan Campbell <Ian.Campbell@eu.citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 06 5月, 2011 3 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
They had the wrong data or were in the wrong spot. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
We do a check for the operations right before calling dispatch_rw_block_io. And then we do the same check in dispatch_rw_block_io. This patch squashes those checks into the 'dispatch_rw_block_io' function. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
We drop the support for 'feature-barrier' and add in the support for the 'feature-flush-cache' if the real backend storage supports flushing. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 28 4月, 2011 1 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
This reverts commit 97961ef4 b/c we lose about 15% performance if we do the unplugging and the end of the reading the ring buffer.
-
- 27 4月, 2011 2 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
If one runs a simple fio request with random read/write with a 20%/80% ratio, the numbers are incredibly bad when using the CFQ scheduler. IOmeter | | | | 64K, randrw | NOOP | CFQ | deadline | randrwmix=80 | | | | --------------+-------+------+----------+ blkback |103/27 |32/10 | 102/27 | --------------+-------+------+----------+ QEMU qdisk |103/27 |102/27| 102/27 | The problem as explained by Vivek Goyal was: ".. that difference is that sync vs async requests. In the case of a kernel thread submitting IO, [..] all the WRITES might be being considered as async and will go in a different queue. If you mix those with some READS, they are always sync and will go in differnet queue. In presence of sync queue, CFQ will idle and choke up WRITES in an attempt to improve latencies of READs. In case of AIO [note: this is what QEMU qdisk is doing] , [..] it is direct IO and both READS and WRITES will be considered SYNC and will go in a single queue and no choking of WRITES will take place." The solution is quite simple, tack on REQ_SYNC (which is what the WRITE_ODIRECT macro points to) and the numbers go back up. Suggested-by: Vivek Goyal <vgoyal@redhat.com Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
We used to the plug/unplug on the submit_bio. But that means if within a stream of WRITE, WRITE, WRITE,...,WRITE we have one READ, it could stall the pipeline (as the 'submio_bio' could trigger the unplug_fnc to be called and stall/sync when doing the READ). Instead we want to move the unplugging when the whole (or as a much as possible) ring buffer has been processed. This also eliminates us doing plug/unplug for each request. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 20 4月, 2011 3 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
And also shorten the name if it has blkback to blkbk. This results in the symbol table (if compiled in the kernel) to be much shorter, prettier, and also easier to search for. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
Shuffling code around. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
Daniel Stodden suggested to eliminate vbd.c and interface.c, inlining the critical bits where they belong, respectively. Leaving only blkback.c for the data- and xenbus.c for the control path. Suggested-by: NDaniel Stodden <daniel.stodden@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 19 4月, 2011 3 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
.. and modify the Makefile and Kconfig files appropriately. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
They were used to check if the queue does not have QUEUE_FLAG_DEAD set. That is not necessary anymore as the 'submit_io' call ends up doing that for us. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
After the commit 0faa8cca (" xen/blkback: remove per-queue plugging") we forgot to retrieve the 'struct request_queue' from the block device. This puts the functionality back in and fixes a NULL pointer bug. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 18 4月, 2011 1 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
The commit 976222e0 xen/blkback: Move the check for misaligned I/O higher. moved it a bit to high. The preq->vbdev was not set, so the check for misaligned I/O would cause a NULL pointer derefence. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 15 4月, 2011 23 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
The previous name ('fast_flush_area') had nothing to do with what it does right now. Changing the names so that the code dealing with mapping pages in and out of the guest is called xen_blkbk_[map|unmap]. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
We move it up higher to be in same loop that actually computes the sector number. This way, all of the code that deals with verifying that the request is correct is all done before we do any of the page mapping, I/O submission, etc. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
We take out the chunk of code dealing with mapping to the guest of pages into the xen_blk_map_buf code. And we also move the vbd_translate to be done much earlier. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
Moving it so that the code that 'fast_flush_area' code is close to the code that deals with it so that the reader won't lose focus. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
We seperate the bio allocation (bio_alloc) from the bio submission so that the error paths are much easier, and also so that the bio submission can be done in one tight loop. It also makes the plug/unplug calls much much easier. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
commit 7eaceacc ("block: remove per-queue plugging") added two new interfaces to plug and unplug: blk_start_plug and blk_finish_plug. Lets use those. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
checkpatch.pl suggested that we don't use the typdef in common.h and this triggered this avalanche of patches. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Tom Goetz 提交于
The WRITE_BARRIER was missing the REQ_WRITE option. This was causing the blktap to die. Signed-off-by: NTom Goetz <tom.goetz@virtualcomputer.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
The patch titled:"xen/blkback: Use 'vzalloc' for page arrays and pre-allocate pages." allocates the structures and its member variables using the 'vzalloc'. Daniel Stodden pointed out that vzalloc is good when we use big number of pages - while these are at the max two pages. We can do this using kzalloc. Also the GFP_HIGHMEM does not work properly with Xen, so take that out. We will have to revisit this when a "get_empty_pages_and_pagevec" type API shows up to leverage that. BugLink: http://mid.gmane.org/1299898639.11681.227.camel@agari.van.xensource.com CC: Daniel Stodden <daniel.stodden@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
Instead of doing copy grants lets do mapping grants using the M2P(and P2M) override mechanism. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Conflicts: drivers/xen/blkback/blkback.c
-
由 Konrad Rzeszutek Wilk 提交于
Previously we would allocate the array for page using 'kmalloc' which we can as easily do with 'vzalloc'. The pre-allocation of pages was done a bit differently in the past - it used to be that the balloon driver would export "alloc_empty_pages_and_pagevec" which would have in one function created an array, allocated the pages, balloned the pages out (so the memory behind those pages would be non-present), and provide us those pages. This was OK as those pages were shared between other guest and the only thing we needed was to "swizzel" the MFN of those pages to point to the other guest MFN. We can still "swizzel" the MFNs using the M2P (and P2M) override API calls, but for the sake of simplicity we are dropping the balloon API calls. We can return to those later on. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
Following in the steps of patch: "xen: Union the blkif_request request specific fields" this patch changes the blkback. Per the original patch: "Prepare for extending the block device ring to allow request specific fields, by moving the request specific fields for reads, writes and barrier requests to a union member." Cc: Owen Smith <owen.smith@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
Bundle the lot of discrete variables into a single structure. This is based on what was done in the xen-netback driver: xen: netback: Move global/static variables into struct xen_netbk. (094944631cc5a9d6e623302c987f78117c0bf7ac) Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Jan Beulich 提交于
Cherry-pick and modified from 69d64727c42eecd47fdf82c15a54474d21a4012a ("blkback/blktap2: simplify address translations"): "There are quite a number of places where e.g. page->va->page translations happen. Besides yielding smaller code (source and binary), a second goal is to make it easier to determine where virtual addresses of pages allocated through alloc_empty_pages_and_pagevec() are really used (in turn in order to determine whether using highmem pages would be possible there)." The second goal is not the purpose of this patch - it is just to make it easier to read the code. linux-2.6-pvops: * Stripped drivers/xen/gntdev/* * Stripped drivers/xen/netback/* [v2: Stripped blktap off] Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NDaniel Stodden <daniel.stodden@citrix.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
TODO: Double check xen-blkfront.c
-
由 K. Y. Srinivasan 提交于
Support dynamic resizing of virtual block devices. This patch supports both file backed block devices as well as physical devices that can be dynamically resized on the host side. Signed-off-by: NK. Y. Srinivasan <ksrinivasan@novell.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Konrad Rzeszutek Wilk 提交于
We neglect to check the return value of xenbus_register_backend and take actions when that fails. This patch fixes that and adds code to deal with those type of failures. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
Remove unused local prototype; group headers. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Keir Fraser 提交于
-