提交 ebe81906 编写于 作者: K Konrad Rzeszutek Wilk

xen/blkback: Change printk/DPRINTK to pr_.. type variant.

And also make them uniform and prefix the message with 'xen-blkback'.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
上级 01f37f2d
......@@ -196,20 +196,20 @@ static void vbd_resize(struct blkif_st *blkif)
struct xenbus_device *dev = xen_blkbk_xenbus(blkif->be);
unsigned long long new_size = vbd_sz(vbd);
printk(KERN_INFO "VBD Resize: Domid: %d, Device: (%d, %d)\n",
pr_info("xen-blkback: VBD Resize: Domid: %d, Device: (%d, %d)\n",
blkif->domid, MAJOR(vbd->pdevice), MINOR(vbd->pdevice));
printk(KERN_INFO "VBD Resize: new size %llu\n", new_size);
pr_info("xen-blkback: VBD Resize: new size %llu\n", new_size);
vbd->size = new_size;
again:
err = xenbus_transaction_start(&xbt);
if (err) {
printk(KERN_WARNING "Error starting transaction");
pr_warn("xen-blkback: Error starting transaction");
return;
}
err = xenbus_printf(xbt, dev->nodename, "sectors", "%llu",
(unsigned long long)vbd_sz(vbd));
if (err) {
printk(KERN_WARNING "Error writing new size");
pr_warn("xen-blkback: Error writing new size");
goto abort;
}
/*
......@@ -219,7 +219,7 @@ static void vbd_resize(struct blkif_st *blkif)
*/
err = xenbus_printf(xbt, dev->nodename, "state", "%d", dev->state);
if (err) {
printk(KERN_WARNING "Error writing the state");
pr_warn("xen-blkback: Error writing the state");
goto abort;
}
......@@ -227,7 +227,7 @@ static void vbd_resize(struct blkif_st *blkif)
if (err == -EAGAIN)
goto again;
if (err)
printk(KERN_WARNING "Error ending transaction");
pr_warn("xen-blkback: Error ending transaction");
abort:
xenbus_transaction_end(xbt, 1);
}
......@@ -253,9 +253,9 @@ irqreturn_t xen_blkif_be_int(int irq, void *dev_id)
static void print_stats(struct blkif_st *blkif)
{
printk(KERN_DEBUG "%s: oo %3d | rd %4d | wr %4d | f %4d\n",
current->comm, blkif->st_oo_req,
blkif->st_rd_req, blkif->st_wr_req, blkif->st_f_req);
pr_debug("xen-blkback (%s): oo %3d | rd %4d | wr %4d | f %4d\n",
current->comm, blkif->st_oo_req,
blkif->st_rd_req, blkif->st_wr_req, blkif->st_f_req);
blkif->st_print = jiffies + msecs_to_jiffies(10 * 1000);
blkif->st_rd_req = 0;
blkif->st_wr_req = 0;
......@@ -270,7 +270,7 @@ int xen_blkif_schedule(void *arg)
xen_blkif_get(blkif);
if (debug_lvl)
printk(KERN_DEBUG "%s: started\n", current->comm);
pr_debug("xen-blkback: %s: started\n", current->comm);
while (!kthread_should_stop()) {
if (try_to_freeze())
......@@ -299,7 +299,7 @@ int xen_blkif_schedule(void *arg)
if (log_stats)
print_stats(blkif);
if (debug_lvl)
printk(KERN_DEBUG "%s: exiting\n", current->comm);
pr_debug("xen-blkback: %s: exiting\n", current->comm);
blkif->xenblkd = NULL;
xen_blkif_put(blkif);
......@@ -343,8 +343,8 @@ static void xen_blkbk_unmap(struct pending_req *req)
ret = m2p_remove_override(
virt_to_page(unmap[i].host_addr), false);
if (ret) {
printk(KERN_ALERT "Failed to remove M2P override for %lx\n",
(unsigned long)unmap[i].host_addr);
pr_alert("xen-blkback: Failed to remove M2P override for %lx\n",
(unsigned long)unmap[i].host_addr);
continue;
}
}
......@@ -385,7 +385,7 @@ static int xen_blkbk_map(struct blkif_request *req,
*/
for (i = 0; i < nseg; i++) {
if (unlikely(map[i].status != 0)) {
DPRINTK("invalid buffer -- could not remap it\n");
pr_debug("xen-blkback: invalid buffer -- could not remap it\n");
map[i].handle = BLKBACK_INVALID_HANDLE;
ret |= 1;
}
......@@ -398,9 +398,8 @@ static int xen_blkbk_map(struct blkif_request *req,
ret = m2p_add_override(PFN_DOWN(map[i].dev_bus_addr),
blkbk->pending_page(pending_req, i), false);
if (ret) {
printk(KERN_ALERT "Failed to install M2P override for"\
" %lx (ret: %d)\n", (unsigned long)
map[i].dev_bus_addr, ret);
pr_alert("xen-blkback: Failed to install M2P override for %lx (ret: %d)\n",
(unsigned long)map[i].dev_bus_addr, ret);
/* We could switch over to GNTTABOP_copy */
continue;
}
......@@ -420,12 +419,12 @@ static void __end_block_io_op(struct pending_req *pending_req, int error)
/* An error fails the entire request. */
if ((pending_req->operation == BLKIF_OP_FLUSH_DISKCACHE) &&
(error == -EOPNOTSUPP)) {
DPRINTK("blkback: flush diskcache op failed, not supported\n");
pr_debug("xen-blkback: flush diskcache op failed, not supported\n");
xen_blkbk_flush_diskcache(XBT_NIL, pending_req->blkif->be, 0);
pending_req->status = BLKIF_RSP_EOPNOTSUPP;
} else if (error) {
DPRINTK("Buffer not up-to-date at end of operation, "
"error=%d\n", error);
pr_debug("xen-blkback: Buffer not up-to-date at end of operation,"
" error=%d\n", error);
pending_req->status = BLKIF_RSP_ERROR;
}
......@@ -562,7 +561,8 @@ static int dispatch_rw_block_io(struct blkif_st *blkif,
nseg = req->nr_segments;
if (unlikely(nseg == 0 && operation != WRITE_FLUSH) ||
unlikely(nseg > BLKIF_MAX_SEGMENTS_PER_REQUEST)) {
DPRINTK("Bad number of segments in request (%d)\n", nseg);
pr_debug("xen-blkback: Bad number of segments in request (%d)\n",
nseg);
/* Haven't submitted any bio's yet. */
goto fail_response;
}
......@@ -588,10 +588,10 @@ static int dispatch_rw_block_io(struct blkif_st *blkif,
}
if (vbd_translate(&preq, blkif, operation) != 0) {
DPRINTK("access denied: %s of [%llu,%llu] on dev=%04x\n",
operation == READ ? "read" : "write",
preq.sector_number,
preq.sector_number + preq.nr_sects, preq.dev);
pr_debug("xen-blkback: access denied: %s of [%llu,%llu] on dev=%04x\n",
operation == READ ? "read" : "write",
preq.sector_number,
preq.sector_number + preq.nr_sects, preq.dev);
goto fail_response;
}
......@@ -602,8 +602,8 @@ static int dispatch_rw_block_io(struct blkif_st *blkif,
for (i = 0; i < nseg; i++) {
if (((int)preq.sector_number|(int)seg[i].nsec) &
((bdev_logical_block_size(preq.bdev) >> 9) - 1)) {
DPRINTK("Misaligned I/O request from domain %d",
blkif->domid);
pr_debug("xen-blkback: Misaligned I/O request from domain %d",
blkif->domid);
goto fail_response;
}
}
......@@ -759,7 +759,7 @@ static int __init xen_blkif_init(void)
blkbk = kzalloc(sizeof(struct xen_blkbk), GFP_KERNEL);
if (!blkbk) {
printk(KERN_ALERT "%s: out of memory!\n", __func__);
pr_alert("xen-blkback: %s: out of memory!\n", __func__);
return -ENOMEM;
}
......@@ -807,7 +807,7 @@ static int __init xen_blkif_init(void)
return 0;
out_of_memory:
printk(KERN_ERR "%s: out of memory\n", __func__);
pr_alert("xen-blkback: %s: out of memory\n", __func__);
failed_init:
kfree(blkbk->pending_reqs);
kfree(blkbk->pending_grant_handles);
......
......@@ -23,7 +23,7 @@
#undef DPRINTK
#define DPRINTK(fmt, args...) \
pr_debug("blkback/xenbus (%s:%d) " fmt ".\n", \
pr_debug("xen-blkback: (%s:%d) " fmt ".\n", \
__func__, __LINE__, ##args)
struct backend_info {
......@@ -136,7 +136,7 @@ static int map_frontend_page(struct blkif_st *blkif, unsigned long shared_page)
BUG();
if (op.status) {
DPRINTK(" Grant table operation failure !\n");
DPRINTK("Grant table operation failure !\n");
return op.status;
}
......@@ -509,10 +509,8 @@ static void backend_changed(struct xenbus_watch *watch,
if ((be->major || be->minor) &&
((be->major != major) || (be->minor != minor))) {
printk(KERN_WARNING
"blkback: changing physical device (from %x:%x to "
"%x:%x) not supported.\n", be->major, be->minor,
major, minor);
pr_warn("xen-blkback: changing physical device (from %x:%x to %x:%x) not supported.\n",
be->major, be->minor, major, minor);
return;
}
......@@ -578,8 +576,8 @@ static void frontend_changed(struct xenbus_device *dev,
switch (frontend_state) {
case XenbusStateInitialising:
if (dev->state == XenbusStateClosed) {
printk(KERN_INFO "%s: %s: prepare for reconnect\n",
__func__, dev->nodename);
pr_info("xen-blkback: %s: prepare for reconnect\n",
dev->nodename);
xenbus_switch_state(dev, XenbusStateInitWait);
}
break;
......@@ -733,9 +731,8 @@ static int connect_ring(struct backend_info *be)
xenbus_dev_fatal(dev, err, "unknown fe protocol %s", protocol);
return -1;
}
printk(KERN_INFO
"blkback: ring-ref %ld, event-channel %d, protocol %d (%s)\n",
ring_ref, evtchn, be->blkif->blk_protocol, protocol);
pr_info("xen-blkback: ring-ref %ld, event-channel %d, protocol %d (%s)\n",
ring_ref, evtchn, be->blkif->blk_protocol, protocol);
/* Map the shared frame, irq etc. */
err = xen_blkif_map(be->blkif, ring_ref, evtchn);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册