task #29499913

commit 097a522257ea3446b1e3b03f5c2498c23f9cd84f upstream

In turbo-freq or base-freq auto mode, for disable, first disable the feature and
then disable clos.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 78e77b7dfd9abdf0bb003b679e0afbde78d98f47 upstream

The turbo-freq enable with auto mode, prints result for the last possible
CPU, which is not correct when either CPU is not present or user wants
command to be limited to a single die/package. For example, in the
below command user wants to limit to die/package 0, but the
"turbo-freq --auto" result is displayed using the other package.

$ sudo intel-speed-select -c 0 turbo-freq enable -a
Intel(R) Speed Select Technology
 package-0
  die-0
    cpu-0
      turbo-freq
        enable:success
 package--1
  die-0
    cpu-31
      turbo-freq --auto
        enable:success

Since we do have to traverse all CPUs, don't display CPU info for
"turbo-freq --auto", as we already displayed the result for
turbo-freq enable with the CPU information.

With the fix, the same command results in:

$ sudo intel-speed-select -c 0 turbo-freq enable -a
Intel(R) Speed Select Technology
package-0
  die-0
    cpu-0
      turbo-freq
        enable:success
      turbo-freq --auto
        enable:success
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 645feeb2f571acfc36a7205a6302e8c7e442d617 upstream

It is possible that BIOS may not enable core-power feature. In this case
this additional interface will allow to enable from this utility. Also
the information dump, includes the current status of core-power.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 1434a3d357d656d4b11fcbdc9b6c35dc673292a0 upstream

When only base config level is present, this tool is displaying TRL
(Turbo-ratio-limits) by reading legacy MSR. In this case, also present
core count for TRL by reading MSR 0x1AE.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 20183ccd3e4d01d23b0a01fe9f3ee73fbae312fa upstream

It is possible that certain config levels are not available, even
if the max level includes the level. There can be missing levels in
some platforms. So ignore the level when called for information dump
for all levels and fail if specifically ask for the missing level.

Here the changes is to continue reading information about other levels
even if we fail to get information for the current level. But use the
"processed" flag to indicate the failure. When the "processed" flag is
not set, don't dump information about that level.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 5c14aba77874d350db8973f4c980fd92c8b1fa07 upstream

Since the tool now adds support for another Intel SST implementation,
increment version number.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit de7f9d3ddc8c71a116fbdfa298a19abd8d46e696 upstream

Some firmware implementation gives error when a command is sent get mask
for core count 32-61. So use core count to decide.

But there is no function to get core count. So introduce one function to
get core count.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 7af5a95bb752702bfc91fc513d37f1f799e6fd1f upstream

There are some platforms, where there limited support of Intel(R) SST
features. Here perf-profile has only one base configuration and limited
support of commands. But still has support for discovery of base-freq and
turbo-freq features. So it is important to show minimum features to use
base-freq and turbo-freq features.

Here the change are:
- When there is no support of CONFIG_TDP_GET_LEVELS_INFO, then instead
of treating this as fatal error, treat this with number of config levels
= 0, that means only base level 0 is present.
- There is no support of mail box commands to get base frequencies or
turbo frequencies. Here present base frequency by reading cpufreq
base freq and turbo frequency by reading MSR 0x1AD.
- Don't display any field, which has value == 0.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 21c3390d61286912cef312dc4752719142ce0d54 upstream

Use different frequency weights for CLOS 0 and and CLOS1-3, to define
relative priority for power budgeting. This will be used for --auto
mode to enable base-freq and turbo-freq feature.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 40dee9dda37d5596ad119d3c3962ca49d3f035a5 upstream

To be consistant with the other frequency units, change the CLOS
unit to MHz instead of ratios.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit cd0e63706549c3e0d61f5fe48806a4528c575035 upstream

Use mailbox to read/write CLOS_PM_QOS_CONFIG instead of read/write to
MMIO offset.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit a9b2f8e2fa6c0f791f2345afb826d47c6a0f0e2c upstream

There is an expectation in the CLX platform for SST base-freq feature that
Scaling min frequency be different for high and low priority cores.
This is the way the firmware will understand the priority.

So this change will look at high priority and low priority cores, and set
scaling_min_freq to P1High for high priority cores and P1Low to low
priority cores.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 91d928147bb0d03219fd6cc079e16fd74e232e2b upstream

In CLX_N base_frequency is read from cpufreq sysfs, where units are in
KHz. The internal units in the code matches the real ratios which are
in 100MHz scale. So when storing units for CLX-N frequencies, convert
to 100MHz scale.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 82d4a34ee6196a652f04f81d23ab296bddf8486d upstream

Make the avx level display consistent. Except for "turbo-ratio-limits-avx",
everywhere else it is avx2. So change "turbo-ratio-limits-avx"
to "turbo-ratio-limits-avx2".
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 263225c983aa27719fe06836426e270b658036ed upstream

Add support for uncore P0, uncore P1, P1 for base and AVX levels and
memory frequency. These commands are optional, so continue on
failure.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 1aa7177cdcb38d114e0a80dc27482e645d8068f2 upstream

Add functionality for base-freq info|enable|disable info on CascadeLake-N.

Sample output:
Intel(R) Speed Select Technology
Executing on CPU model:85[0x55]
 package-0
  die-0
    cpu-0
      speed-select-base-freq
        high-priority-base-frequency(MHz):2700000
        high-priority-cpu-mask:00000000,0000e8c0
        high-priority-cpu-list:6,7,11,13,14,15
        low-priority-base-frequency(MHz):2100000
 package-1
  die-0
    cpu-20
      speed-select-base-freq
        high-priority-base-frequency(MHz):2700000
        high-priority-cpu-mask:0000000e,8c000000
        high-priority-cpu-list:26,27,31,33,34,35
        low-priority-base-frequency(MHz):2100000

The enable command always returns success, and the disable command always
returns failed because SST-BF cannot be enabled or disabled from the OS on
CascadeLake-N.

Enable command also have support for --auto|-a option, which sets cpufreq
scaling_min to max, so that the high priority base frequency can be the
required minimum for high priority cores. Disable command with -a/--auto
option reset the setting back to the min frequency.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 062e4aac92e8acbab2fd135e90b580b903c3724b upstream

Add functionality for "perf-profile info" on CascadeLake-N.

Sample output:
intel-speed-select perf-profile info
Intel(R) Speed Select Technology
Executing on CPU model:85[0x55]
 package-0
  die-0
    cpu-0
      perf-profile-level-0
        cpu-count:20
        enable-cpu-mask:00000000,000fffff
        enable-cpu-list:0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
        thermal-design-power-ratio:23
        base-frequency(MHz):2300
        speed-select-turbo-freq:unsupported
        speed-select-base-freq:enabled
        speed-select-base-freq
          high-priority-base-frequency(MHz):2700000
          high-priority-cpu-mask:00000000,0000e8c0
          high-priority-cpu-list:6,7,11,13,14,15
          low-priority-base-frequency(MHz):2100000
 package-1
  die-0
    cpu-20
      perf-profile-level-0
        cpu-count:20
        enable-cpu-mask:000000ff,fff00000
        enable-cpu-list:20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39
        thermal-design-power-ratio:23
        base-frequency(MHz):2300
        speed-select-turbo-freq:unsupported
        speed-select-base-freq:enabled
        speed-select-base-freq
          high-priority-base-frequency(MHz):2700000
          high-priority-cpu-mask:0000000e,8c000000
          high-priority-cpu-list:26,27,31,33,34,35
          low-priority-base-frequency(MHz):2100000
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit c829f0ef7bfc4b294e67506779853547e8b52c68 upstream

CascadeLake-N only supports SST-BF and needs some of the perf-profile
commands, and the base-freq commands.

Add help functions, and create an empty command structures (the functions
will be implemented later in this patchset).  Call these functions
when running on CascadeLake-N.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 1c1d935c8418a63d110b2b31c57ba3d75f94f49d upstream

Three CascadeLake-N models (6252N, 6230N, and 5218N) have SST-PBF support.

Return an error if the CascadeLake processor is not one of these specific
models.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 210369dc73b23fab1b9727fba35c2f83d00b6277 upstream

Make the process_command take any help command and command list.  This
will make it easier to help commands and a command list for CascadeLake-N.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit ce1326a2f9f7bf8920bc7f07e7b13ce8737b4681 upstream

The current code structure has similar but separate command functions for
the enable and disable operations.  This can be improved by adding an int
argument to the command function structure, and interpreting 1 as enable
and 0 as disable.  This change results in the removal of the disable
command functions.

Add int argument to the command function structure.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 4e26fabfe15ca67125f1b6984671c2e9048d64a5 upstream

The turbo-freq feature is dependent on the core-power feature. If the
core-power feature is disabled while the turbo-freq feature is enabled,
this will break the turbo-freq feature. This is a firmware limitation,
where they can't return error under this scenario.

So when trying to disable core-power, make sure that the turbo-freq
feature is not enabled. If it enabled, return error if user is trying to
disable the core-power feature.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit a6a82f9bcd2ad3fab5f20fc406727dc62775db92 upstream

Introduce --auto|-a option to turbo-freq enable feature, so that it
does in one step for users who are OK by setting all passed target cores
as high priority and set in CLOS 0 and remaining in CLOS 3. In this way,
users don't have to take multiple steps to enable turbo-freq feature. For
users who want more fine grain control, they can always use core-power
feature to set custom CLOS configuration and assignment.

While here also print the error to output when clos configuration fails.

For example
intel-speed-select -c 0-4 turbo-freq enable --auto

The above command will enable turbo-freq and core-power feature. Also
mark CPU 0 to CPU 4 as high priority.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 354bd06f40c4ba7b2f12d9f0f119dff62a2f922f upstream

Introduce --auto|-a option to base-freq enable feature, so that it
does in one step for users who are OK by setting all cores with higher
base frequency to be set in CLOS 0 and remaining in CLOS 3. This option
also sets corresponding clos.min to CLOS 0 and CLOS3. In this way, users
don't have to take multiple steps to enable base-freq feature. For users
who want more fine grain control, they can always use core-power feature
to set custom CLOS configuration and assignment.

Also adjust cpufreq/scaling_min_freq for higher and lower priority cores.

For example user can use:
intel-speed-select base-freq enable --auto
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit abd120e3bdf3dd72ba1ed9ac077a861e0e3dc43a upstream

Fix warning for:
isst-config.c: In function ‘set_cpu_online_offline’:
isst-config.c:221:3: warning: ignoring return value of ‘write’,
declared with attribute warn_unused_result [-Wunused-result]
   write(fd, "1\n", 2);
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit b3abfd778bf1dbdd96f70bd7d00671d027f67c62 upstream

commit "c016ae8f9fa04d361efc8629de49ad3af12b5262
"tools/power/x86/intel-speed-select: Output success/failed for command
output" introduced a regression in perf-profile outputs. With this
the result field is changed to string interpreting every non zero
value as errors. But these commands display on zero (>0) result.
For example before this commit the display was:

package-1
  die-0
    cpu-14
        get-config-levels:4

Here the get-config-levels is interpreted as error and displayed
as error with the above commit:

package-1
  die-0
    cpu-14
        get-config-levels:failed(error 4)

Fix this issue by not using isst_display_result() to display such results,
but define a new function which formats this data and prints.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 188afed9db7db3aefc8c9c33150be2f8f398da9a upstream

Add additional command to get the clos enable and priority type. The
current info option is actually dumping per clos QOS config, so name
the command appropriately to get-config.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit d2d1f304dc965e6a06e7f105b09bffceb477fccc upstream

Fix wrong debug print for cpu, which is displayed as CLOS. Also
avoid printing clos id, when user is specify clos as parameter.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit e118fbe366d817175b2c47bfa338959bbff5bd37 upstream

Format the get-assoc command output consistant with other commands.
For example:

Intel(R) Speed Select Technology
Executing on CPU model:142[0x8e]
 package-0
  die-0
    cpu-0
      get-assoc
        clos:0
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 3c64c81ad1f06823b603e9143193dcb4f3121a2f upstream

Using enable core mask, do online offline CPUs. There is a new option
--online|-o for set-config-level.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 44460efe44e05eae2f21e57d06d542bbbb792e65 upstream

If the CPU package has the less logical CPU than topo_max_cpus, but un-present
CPU's punit_cpu_core will be initiated to 0 and they will be count to core 0

Like below, there are only 10 high priority cores (20 logical CPUs) in the CPU
package, but it count to 27 logic CPUs.

./intel-speed-select base-freq info -l 0 | grep mask
        high-priority-cpu-mask:7f000179,f000179f

With the fix patch:
./intel-speed-select base-freq info -l 0
        high-priority-cpu-mask:00000179,f000179f
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 1233c7b95c7045905e40c11484493f20ab521d21 upstream

Read the bucket and core count relationship via MSR and display
when displaying turbo ratio limits.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 3bc3d30ca324bfc3045a1a7fe1f5fe5ad5d92fd9 upstream

cpumasks are allocated by calling the alloc_cpu_mask() function and are
never free'd.  They should be free'd after the commands have run.

Fix the memory leaks by calling free_cpu_set().
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Acked-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: David Arcari <darcari@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 522586a9d5c32b5d7569237eebbfd8241f196419 upstream

Command output has confusing data, returning "0" on success.  For example

|# ./intel-speed-select -c 14 turbo-freq enable
Intel(R) Speed Select Technology
Executing on CPU model:106[0x6a]
 package-1
   die-0
     cpu-14
       turbo-freq
         enable:0

To avoid confusion change the command output to 'success' or 'failed'.

v2: Remove help output line.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Acked-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: David Arcari <darcari@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 49aed155ec1b07f8820cceec7317c597a6f69c6e upstream

The intel-speed-select tool currently only outputs a hexidecimal CPU mask,
which requires translation for use with kernel parameters such as
isolcpus.

Along with the CPU mask, output a human readable CPU list.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Acked-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: David Arcari <darcari@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 76c2ef35f73913380f32d473a181d68decfca4f4 upstream

The intel-speed-select tool currently outputs the turbo ratio for every
bucket.  Make the output more user-friendly by changing the output to the
maximum turbo frequency.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Acked-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: David Arcari <darcari@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 808088e4a1fb2d27a347db2890d43ae73c75a72f upstream

These features are introduced on new processors that will never operate
in the KHz range.

Save some zeros and switch the output to MHz.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Acked-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: David Arcari <darcari@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit dece22a2d5e37cf7c4cda9a7d5f036c9b3fdaccb upstream

The current output of 'intel-speed-select -c 53 perf-profile info -l 0'
shows

        speed-select-turbo-freq-support:1
        speed-select-base-freq-support:1
        speed-select-base-freq-enabled:0
        speed-select-turbo-freq-enabled:0

Simplify the output to single lines displaying status of disabled,
enabled, and unsupported.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Acked-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: David Arcari <darcari@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 3ec2aef1b03eefeffe93817bd04068d3805d4a98 upstream

I have a system with 28 threads/socket but intel-speed-select reports
a cpu-count of 29.

Fix an off-by-one error in the cpu_count() function.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Acked-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: David Arcari <darcari@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

task #29499913

commit 43774c0dccb405a0b63a10829d45db4b74c29e40 upstream

Help is -h, not --h.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Acked-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: David Arcari <darcari@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>