Add support for multiple hardware receive queues. The ingress traffic is hashed into one of the receive queues based on IP or TCP or both headers. The max no. of receive queues supported is 8.
Signed-off-by: NVasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com>
Signed-off-by: NDavid Wang <dwang2@cisco.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Free irq on error path.
Signed-off-by: NDenis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove duplicated code in one place.
Signed-off-by: NDenis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no point using RCU for dst we allocate for a very short time
(used once).

Change dst_release() to take DST_NOCACHE into account, but also change
skb_dst_set_noref() to force a refcount increment for such dst.

This is a _huge_ gain, because we dont waste memory to store xx thousand
of dsts. Instead of queueing them to RCU, we can free them instantly.

CPU caches can stay hot, re-using same memory blocks to hold temporary
dsts.

Note : remove unneeded smp_mb__before_atomic_dec(); in dst_release(),
since atomic_dec_return() implies a full memory barrier.

Stress test, 160.000.000 udp frames sent, IP route cache disabled
(DDOS).

Before:

real    0m38.091s
user    0m13.189s
sys     7m53.018s

After:

real	0m29.946s
user	0m12.157s
sys	7m40.605s

For reference, if IP route cache was enabled :

real	0m32.030s
user	0m10.521s
sys	8m15.243s
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch introduces netif_alloc_netdev_queues which is called from
register_device instead of alloc_netdev_mq.  This makes TX queue
allocation symmetric with RX allocation.  Also, queue locks allocation
is done in netdev_init_one_queue.  Change set_real_num_tx_queues to
fail if requested number < 1 or greater than number of allocated
queues.
Signed-off-by: NTom Herbert <therbert@google.com>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Clean up in RX queue allocation.  In netif_set_real_num_rx_queues
return error on attempt to set zero queues, or requested number is
greater than number of allocated queues.  In netif_alloc_rx_queues,
do BUG_ON if queue_count is zero.
Signed-off-by: NTom Herbert <therbert@google.com>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In alloc_netdev_mq fail if requested queue_count < 1.
Signed-off-by: NTom Herbert <therbert@google.com>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

Signed-off-by: NChangli Gao <xiaosuo@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In an erlier patch I modified napi_poll so that devices with IFF_MASTER polled
the per_cpu list instead of the device list for napi.  I did this because the
bonding driver has no napi instances to poll, it instead expects to check the
slave devices napi instances, which napi_poll was unaware of.  Looking at this
more closely however, I now see this isn't strictly needed.  As the bond driver
poll_controller calls the slaves poll_controller via netpoll_poll_dev, which
recursively calls poll_napi on each slave, allowing those napi instances to get
serviced.  The earlier patch isn't at all harmfull, its just not needed, so lets
revert it to make the code cleaner.  Sorry for the noise,
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Reviewed-by: NWANG Cong <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some recent testing in netpoll with bonding showed this backtrace

 ------------[ cut here ]------------
 kernel BUG at drivers/net/bonding/bonding.h:134!
 invalid opcode: 0000 [#1] SMP
 last sysfs file: /sys/devices/pci0000:00/0000:00:1d.2/usb7/devnum
 CPU 0
 Pid: 1876, comm: rmmod Not tainted 2.6.36-rc3+ #10 D26928/
 RIP: 0010:[<ffffffffa0514ba4>]  [<ffffffffa0514ba4>] bond_uninit+0x6f4/0x7a0
 RSP: 0018:ffff88003b1b5d58  EFLAGS: 00010296
 RAX: ffff88003b9b6200 RBX: ffff8800373e8e00 RCX: 00000000000f4240
 RDX: 00000000ffffffff RSI: 0000000000000286 RDI: 0000000000000286
 RBP: ffff88003b1b5dc8 R08: 0000000000000000 R09: 00000001af7de920
 R10: 0000000000000000 R11: ffff880002495e98 R12: ffff880037922700
 R13: ffff880038c31000 R14: ffff880037922730 R15: 0000000000000286
 FS:  00007f90e6d72700(0000) GS:ffff880002400000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 000000346f0d9ad0 CR3: 000000003b263000 CR4: 00000000000006f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process rmmod (pid: 1876, threadinfo ffff88003b1b4000, task ffff88003b36aa80)
 Stack:
 00000000ffffffff ffff88003b1b5d7a ffff8800379221e8 ffff880037922000
 <0> ffff88003b1b5dc8 ffffffff813eb5fb ffff88003b1b5da8 0000000031b177a3
 <0> ffff88003b1b5da8 ffff880037922000 ffff88003b1b5e48 ffff88003b1b5e48
 Call Trace:
 [<ffffffff813eb5fb>] ? rtmsg_ifinfo+0xcb/0xf0
 [<ffffffff813daad8>] rollback_registered_many+0x168/0x280
 [<ffffffff813dac09>] unregister_netdevice_many+0x19/0x80
 [<ffffffff813e97b3>] __rtnl_kill_links+0x63/0x90
 [<ffffffff813e980b>] __rtnl_link_unregister+0x2b/0x60
 [<ffffffff813e9bde>] rtnl_link_unregister+0x1e/0x30
 [<ffffffffa052124b>] bonding_exit+0x37/0x51 [bonding]
 [<ffffffff81098b2e>] sys_delete_module+0x19e/0x270
 [<ffffffff810bb2b2>] ? audit_syscall_entry+0x252/0x280
 [<ffffffff8100b0b2>] system_call_fastpath+0x16/0x1b
 RIP  [<ffffffffa0514ba4>] bond_uninit+0x6f4/0x7a0 [bonding]
 RSP <ffff88003b1b5d58>
 ---[ end trace 1395ad691cea24d1 ]---

It occurs because of my recent netpoll blocking patches, which I added to avoid
recursive deadlock in the bonding driver.  It relies on some per cpu bits, but
the shutdown path forces some rescheduling as we cancel workqueues for the
driver and wait for some device refcounts.  If after the forced reschedule, we
wind up on a different cpu we trigger the bughalt in unblock_netpoll_tx.

The fix is to remove the netpoll block/unblock calls from bond_release_all.
This is safe to do because bond_uninit, which is called via ndo_uninit in
rollback_registered_many, doesn't occur until we send a NETDEV_UNREGISTER event,
which triggers netconsole to remove us as a netpoll client, so we are guaranteed
not to recurse into our own tx path here.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Reviewed-by: NWANG Cong <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The possible deadlock (on 57710 devices only) will prevent from the
device to generate interrupts.
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert inetdev_by_index() to not increment in_dev refcount.

Callers hold RCU or RTNL, and should not decrement in_dev refcount.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We hold RTNL in ip_mc_find_dev(), no need to touch device refcount.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If you are genuinely using one of these legacy MCA drivers
then you are tragically on hardware where you really don't
have the extra CPU cycles to be wasting on this.

In addition, it makes two less cases for people to inadvertently
blindly copy flags from without explicitly thinking whether it
makes sense -- see the addition to feature-removal.txt as per
commit 9d9b8fb0.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With the inclusion of previous fixup patches, netpoll over bonding apears to
work reliably with failover conditions.  This reverts Gospos previous commit
c22d7ac8, and allows access again to the netpoll
functionality in the bonding driver.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Netconsole calls netpoll_cleanup on receipt of a NETDEVICE_UNREGISTER event.
The notifier subsystem calls these event handlers with rtnl_lock held, which
netpoll_cleanup also takes, resulting in deadlock.  Fix this by calling the
__netpoll_cleanup interior function instead, and fixing up the additional
pointers.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Usually the netpoll path, when preforming a napi poll can get away with just
polling all the napi instances of the configured device.  Thats not the case for
the bonding driver however, as the napi instances which may wind up getting
flagged as needing polling after the poll_controller call don't belong to the
bonded device, but rather to the slave devices.  Fix this by checking the device
in question for the IFF_MASTER flag, if set, we know we need to check the full
poll list for this cpu, rather than just the devices napi instance list.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The monitoring paths in the bonding driver take write locks that are shared by
the tx path.  If netconsole is in use, these paths can call printk which puts us
in the netpoll tx path, which, if netconsole is attached to the bonding driver,
result in deadlock (the xmit_lock guards are useless in netpoll_send_skb, as the
monitor paths in the bonding driver don't claim the xmit_lock, nor should they).
The solution is to use a per cpu flag internal to the driver to indicate when a
cpu is holding the lock in a path that might recusrse into the tx path for the
driver via netconsole.  By checking this flag on transmit, we can defer the
sending of the netconsole frames until a later time using the retransmit feature
of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY.  I've
tested this and am able to transmit via netconsole while causing failover
conditions on the bond slave links.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The bonding driver currently modifies the netpoll structure in its xmit path
while sending frames from netpoll.  This is racy, as other cpus can access the
netpoll structure in parallel. Since the bonding driver points np->dev to a
slave device, other cpus can inadvertently attempt to send data directly to
slave devices, leading to improper locking with the bonding master, lost frames,
and deadlocks.  This patch fixes that up.

This patch also removes the real_dev pointer from the netpoll structure as that
data is really only used by bonding in the poll_controller, and we can emulate
its behavior by check each slave for IS_UP.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move link test call to later in the offline sequence, move the
restore settings block to afterwards and add another reset to ensure
the hardware is in a known state afterwards.
Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com>
Acked-by: NBruce Allan <bruce.w.allan@intel.com>
Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Power Management Quality of Service is not supported or used by the VF
driver.
Signed-off-by: NGreg Rose <gregory.v.rose@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are currently some problems with igb.

- On 32bit arches, maintaining 64bit counters without proper
synchronization between writers and readers.

- Stats updated every two seconds, as reported by Jesper.
   (Jesper provided a patch for this)

- Potential problem between worker thread and ethtool -S

This patch uses u64_stats_sync, and convert everything to be 64bit safe,
SMP safe, even on 32bit arches. It integrates Jesper idea of providing
accurate stats at the time user reads them.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Tested-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

HW workaround:
Disable logging of correctable error for some NX3031 based adapter.
Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is race between netif_stop_queue and netif_stopped_queue
check.So check once again if buffers are available to avoid race.
With above logic we can also get rid of tx lock in process_cmd_ring.
Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Added statistics for Nic Partition supported adapter.
These statistics are maintined in device.
Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change a few checks against the hardcoded broadcast address,
0xffffffff, to ipv4_is_lbcast().  Remove some existing checks
using ipv4_is_lbcast() that are now obviously superfluous.
Signed-off-by: NAndy Walls <awalls@md.metrocast.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As suggested by: Joe Perches <joe@perches.com>

Although RSS is meaningless when there is a single HW queue we
still need it enabled in order to have HW Rx hash generated.
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

the value of the constant is the same, but it's clearer to use original
constant provided by HSI
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Optimized the branching in the bnx2x_rx_int() based on the fact
that FP CQE will always have at least one of START or STOP flags set,
so if not both bits are set and START bit is not set,
then it's a STOP bit that is set.
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Acked-by: NWolfgang Grandegger <wg@grandegger.com>

Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Acked-by: NWolfgang Grandegger <wg@grandegger.com>

Since commit e446630c, i.e. v2.6.35-rc1,
the mcp251x chip model can be selected via the modalias member in the
struct spi_board_info. The driver stores the actual model in the
struct mcp251x_platform_data.

From the driver point of view the platform_data should be read only.
Since all in-tree users of the mcp251x have already been converted to
the modalias method, this patch moves the "model" member from the
struct mcp251x_platform_data to the driver's private data structure.
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Cc: Christian Pellegrin <chripell@fsfe.org>
Cc: Marc Zyngier <maz@misterjones.org>

This patch introduces a variable "clear_intf" that hold the bits that
should be cleared. Only read-modify-write register if "clear_intf"
is set.
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Acked-by: NWolfgang Grandegger <wg@grandegger.com>