- 27 4月, 2017 1 次提交
-
-
由 Al Viro 提交于
all architectures converted Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 29 3月, 2017 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 26 9月, 2016 1 次提交
-
-
由 Greg Ungerer 提交于
Move the selection of CONFIG_FPU to each CPU type configuration. Currently for m68k we have a global set of CONFIG_FPU based on if CONFIG_MMU is enabled or not. There is at least one CPU family we support (m5441x) that has an MMU but has no FPU hardware. So we need to be able to have CONFIG_MMU set and CONFIG_FPU not set. Whether we build for a CPU with MMU enabled or not doesn't change the fact that it has FPU hardware support. Our current non-MMU builds have never had CONIG_FPU enabled - and in fact the kernel will not compile with that set and CONFIG_MMU not set at the moment. It is easy enough to fix this - but it would involve a structure change to sigcontext.h, and that is a user space exported header (so ABI change). This change makes no configuration visible changes, and all configs end up with the same configuration settings as before. This change based on changes and discussion from Yannick Gicquel <yannick.gicquel@open.eurogiciel.org>. Signed-off-by: NGreg Ungerer <gerg@linux-m68k.org>
-
- 21 1月, 2016 2 次提交
-
-
由 Christoph Hellwig 提交于
Move the generic implementation to <linux/dma-mapping.h> now that all architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now that everyone supports them. [valentinrothberg@gmail.com: remove leftovers in Kconfig] Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NValentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 9月, 2015 1 次提交
-
-
由 Dave Young 提交于
There are two kexec load syscalls, kexec_load another and kexec_file_load. kexec_file_load has been splited as kernel/kexec_file.c. In this patch I split kexec_load syscall code to kernel/kexec.c. And add a new kconfig option KEXEC_CORE, so we can disable kexec_load and use kexec_file_load only, or vice verse. The original requirement is from Ted Ts'o, he want kexec kernel signature being checked with CONFIG_KEXEC_VERIFY_SIG enabled. But kexec-tools use kexec_load syscall can bypass the checking. Vivek Goyal proposed to create a common kconfig option so user can compile in only one syscall for loading kexec kernel. KEXEC/KEXEC_FILE selects KEXEC_CORE so that old config files still work. Because there's general code need CONFIG_KEXEC_CORE, so I updated all the architecture Kconfig with a new option KEXEC_CORE, and let KEXEC selects KEXEC_CORE in arch Kconfig. Also updated general kernel code with to kexec_load syscall. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NDave Young <dyoung@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 4月, 2015 1 次提交
-
-
由 Kirill A. Shutemov 提交于
We would want to use number of page table level to define mm_struct. Let's expose it as CONFIG_PGTABLE_LEVELS. Core mm expects __PAGETABLE_{PUD,PMD}_FOLDED to be defined if these page table levels folded. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 8月, 2014 1 次提交
-
-
由 Vivek Goyal 提交于
New system call depends on crypto. As it did not have a separate config option, CONFIG_KEXEC was modified to select CRYPTO and CRYPTO_SHA256. But now previous patch introduced a new config option for new syscall. So CONFIG_KEXEC does not require crypto. Remove that dependency. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Shaun Ruffell <sruffell@digium.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 8月, 2014 1 次提交
-
-
由 Vivek Goyal 提交于
Load purgatory code in RAM and relocate it based on the location. Relocation code has been inspired by module relocation code and purgatory relocation code in kexec-tools. Also compute the checksums of loaded kexec segments and store them in purgatory. Arch independent code provides this functionality so that arch dependent bootloaders can make use of it. Helper functions are provided to get/set symbol values in purgatory which are used by bootloaders later to set things like stack and entry point of second kernel etc. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 4月, 2014 1 次提交
-
-
由 Uwe Kleine-König 提交于
If the renamed symbol is defined lib/iomap.c implements ioport_map and ioport_unmap and currently (nearly) all platforms define the port accessor functions outb/inb and friend unconditionally. So HAS_IOPORT_MAP is the better name for this. Consequently NO_IOPORT is renamed to NO_IOPORT_MAP. The motivation for this change is to reintroduce a symbol HAS_IOPORT that signals if outb/int et al are available. I will address that at least one merge window later though to keep surprises to a minimum and catch new introductions of (HAS|NO)_IOPORT. The changes in this commit were done using: $ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/' Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 3月, 2014 1 次提交
-
-
由 Finn Thain 提交于
Skip the futex_atomic_cmpxchg_inatomic() test in futex_init(). It causes a fatal exception on 68030 (and presumably 68020 also). Signed-off-by: NFinn Thain <fthain@telegraphics.com.au> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1403061006440.5525@nippy.intranetSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 08 12月, 2013 2 次提交
-
-
由 Geert Uytterhoeven 提交于
Add optional support to export the bootinfo used to boot the kernel in a "bootinfo" file in procfs. This is useful with kexec. This is based on the similar feature for ATAGS on ARM. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
- 24 10月, 2013 1 次提交
-
-
由 Mark Salter 提交于
Architectures which support CONFIG_PARPORT_PC should select ARCH_MIGHT_HAVE_PC_PARPORT. Signed-off-by: NMark Salter <msalter@redhat.com> Acked by: Geert Uytterhoeven <geert@linux-m68k.org> CC: linux-m68k@lists.linux-m68k.org
-
- 13 9月, 2013 1 次提交
-
-
由 Martin Schwidefsky 提交于
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 26 8月, 2013 1 次提交
-
-
由 Greg Ungerer 提交于
There is no reason we cannot use the generic iomap support to give us the ioread* and iowrite* family of IO access functions. The m68k arch with MMU enabled does, so this makes us consistent for all m68k now. Some potentially valid drivers will fail to compile without these, for example: drivers/i2c/busses/i2c-ocores.c:81:2: error: implicit declaration of function ‘iowrite8’ [-Werror=implicit-function-declaration] drivers/i2c/busses/i2c-ocores.c:86:2: error: implicit declaration of function ‘iowrite16’ [-Werror=implicit-function-declaration] drivers/i2c/busses/i2c-ocores.c:91:2: error: implicit declaration of function ‘iowrite32’ [-Werror=implicit-function-declaration] drivers/i2c/busses/i2c-ocores.c:96:2: error: implicit declaration of function ‘ioread8’ [-Werror=implicit-function-declaration] drivers/i2c/busses/i2c-ocores.c:101:2: error: implicit declaration of function ‘ioread16’ [-Werror=implicit-function-declaration] drivers/i2c/busses/i2c-ocores.c:106:2: error: implicit declaration of function ‘ioread32’ [-Werror=implicit-function-declaration] Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
-
- 17 4月, 2013 1 次提交
-
-
由 Thomas Gleixner 提交于
All archs are converted over. Remove the config switch and the fallback code. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 16 4月, 2013 1 次提交
-
-
由 Alexandre Courbot 提交于
GENERIC_GPIO has been made equivalent to GPIOLIB in architecture code and all driver code has been switch to depend on GPIOLIB. It is thus safe to have GENERIC_GPIO removed. Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 08 4月, 2013 1 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: NCc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Link: http://lkml.kernel.org/r/20130321215234.535485189@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 13 3月, 2013 1 次提交
-
-
由 Stephen Rothwell 提交于
In commit 887cbce0 ("arch Kconfig: centralise ARCH_NO_VIRT_TO_BUS") I introduced the config sybmol HAVE_VIRT_TO_BUS and selected that where needed. I am not sure what I was thinking. Instead, just directly select VIRT_TO_BUS where it is needed. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 2月, 2013 1 次提交
-
-
由 Stephen Rothwell 提交于
Change it to CONFIG_HAVE_VIRT_TO_BUS and set it in all architecures that already provide virt_to_bus(). Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: NJames Hogan <james.hogan@imgtec.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: H Hartley Sweeten <hartleys@visionengravers.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 2月, 2013 1 次提交
-
-
由 Al Viro 提交于
__ARCH_WANT_SYS_RT_SIGACTION, __ARCH_WANT_SYS_RT_SIGSUSPEND, __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND, __ARCH_WANT_COMPAT_SYS_SCHED_RR_GET_INTERVAL - not used anymore CONFIG_GENERIC_{SIGALTSTACK,COMPAT_RT_SIG{ACTION,QUEUEINFO,PENDING,PROCMASK}} - can be assumed always set.
-
- 04 2月, 2013 3 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 20 12月, 2012 1 次提交
-
-
由 Al Viro 提交于
All architectures have CONFIG_GENERIC_KERNEL_THREAD CONFIG_GENERIC_KERNEL_EXECVE __ARCH_WANT_SYS_EXECVE None of them have __ARCH_WANT_KERNEL_EXECVE and there are only two callers of kernel_execve() (which is a trivial wrapper for do_execve() now) left. Kill the conditionals and make both callers use do_execve(). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 17 10月, 2012 1 次提交
-
-
由 Al Viro 提交于
Acked-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 09 10月, 2012 2 次提交
-
-
由 Catalin Marinas 提交于
Introduce HAVE_DEBUG_BUGVERBOSE config option and select it in corresponding architecture Kconfig files. Architectures that already select GENERIC_BUG don't need to select HAVE_DEBUG_BUGVERBOSE. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: David Howells <dhowells@redhat.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Catalin Marinas 提交于
Introduce HAVE_UID16 config option and select it in corresponding architecture Kconfig files. UID16 now only depends on HAVE_UID16. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 10月, 2012 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 28 9月, 2012 1 次提交
-
-
由 David Howells 提交于
Use the mapping of Elf_[SPE]hdr, Elf_Addr, Elf_Sym, Elf_Dyn, Elf_Rel/Rela, ELF_R_TYPE() and ELF_R_SYM() to either the 32-bit version or the 64-bit version into asm-generic/module.h for all arches bar MIPS. Also, use the generic definition mod_arch_specific where possible. To this end, I've defined three new config bools: (*) HAVE_MOD_ARCH_SPECIFIC Arches define this if they don't want to use the empty generic mod_arch_specific struct. (*) MODULES_USE_ELF_RELA Arches define this if their modules can contain RELA records. This causes the Elf_Rela mapping to be emitted and allows apply_relocate_add() to be defined by the arch rather than have the core emit an error message. (*) MODULES_USE_ELF_REL Arches define this if their modules can contain REL records. This causes the Elf_Rel mapping to be emitted and allows apply_relocate() to be defined by the arch rather than have the core emit an error message. Note that it is possible to allow both REL and RELA records: m68k and mips are two arches that do this. With this, some arch asm/module.h files can be deleted entirely and replaced with a generic-y marker in the arch Kbuild file. Additionally, I have removed the bits from m32r and score that handle the unsupported type of relocation record as that's now handled centrally. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
- 17 8月, 2012 1 次提交
-
-
由 Greg Ungerer 提交于
There is no specific atomic64 support code for any m68k CPUs, so we should select CONFIG_GENERIC_ATOMC64 for all. Remove the existing per CPU selection of this and select it for all m68k. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Acked-by: NFengguang Wu <fengguang.wu@intel.com> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
-
- 31 7月, 2012 1 次提交
-
-
由 Will Deacon 提交于
Rather than #define the options manually in the architecture code, add Kconfig options for them and select them there instead. This also allows us to select the compat IPC version parsing automatically for platforms using the old compat IPC interface. Reported-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NWill Deacon <will.deacon@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 6月, 2012 2 次提交
-
-
由 Geert Uytterhoeven 提交于
They belong together with the CPU selection Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer<gerg@uclinux.org>
-
由 Geert Uytterhoeven 提交于
It's also defined in arch/m68k/Kconfig.cpu Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer<gerg@uclinux.org>
-
- 06 6月, 2012 1 次提交
-
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: NGreg Ungerer <gerg@uclinux.org>
-
- 22 5月, 2012 1 次提交
-
-
由 Thomas Gleixner 提交于
Sigh, I missed to check which architecture Kconfig files actually include the core Kconfig file. There are a few which did not. So we broke them. Instead of adding the includes to those, we are better off to move the include to init/Kconfig like we did already with irqs and others. This does not change anything for the architectures using the old style periodic timer mode. It just solves the build wreckage there. For those architectures which use the clock events infrastructure it moves the include of the core Kconfig file to "General setup" which is a way more logical place than having it at random locations specified by the architecture specific Kconfigs. Reported-by: NIngo Molnar <mingo@kernel.org> Cc: Anna-Maria Gleixner <anna-maria@glx-um.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 21 5月, 2012 1 次提交
-
-
由 Anna-Maria Gleixner 提交于
Signed-off-by: NAnna-Maria Gleixner <anna-maria@glx-um.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Link: http://lkml.kernel.org/r/20120518163105.808606368@glx-um.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 05 5月, 2012 2 次提交
-
-
由 Thomas Gleixner 提交于
Now that all archs except ia64 are converted, replace the config and let the ia64 select CONFIG_ARCH_INIT_TASK Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20120503085035.867948914@linutronix.de
-
由 Thomas Gleixner 提交于
Same code. Use the generic version. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Link: http://lkml.kernel.org/r/20120503085034.816195285@linutronix.de
-