Merge tag 'dmaengine-fixes-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine

Pull dmaengine fixes from Dan Williams:
 "Fix tasklet lifetime management in the ioat driver causing ksoftirqd
  to spin indefinitely.

    References:
    https://lkml.org/lkml/2014/1/27/282
    https://lkml.org/lkml/2014/2/19/672"

* tag 'dmaengine-fixes-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine:
  ioat: fix tasklet tear down

Pull MTD fixes from Brian Norris:
 "Two main MTD fixes:

  1. Read retry counting was off by one, so if we had a true ECC error
     (i.e., no retry voltage threshold would give a clean read), we
     would end up returning -EINVAL on the Nth mode instead of -EBADMSG
     after then (N-1)th mode

  2. The OMAP NAND driver had some of its ECC layouts wrong when
     introduced in 3.13, causing incompatibilities between the
     bootloader on-flash layout and the layout expected in Linux.  The
     expected layouts are now documented in the commit messages, and we
     plan to add this under Documentation/mtd/nand/ eventually"

* tag 'for-linus-20140225' of git://git.infradead.org/linux-mtd:
  mtd: nand: omap: fix ecclayout->oobfree->length
  mtd: nand: omap: fix ecclayout->oobfree->offset
  mtd: nand: omap: fix ecclayout to be in sync with u-boot NAND driver
  mtd: nand: fix off-by-one read retry mode counting

Pull m68k update from Geert Uytterhoeven:
  - More barrier.h consolidation
  - Sched_[gs]etattr() syscalls

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Wire up sched_setattr and sched_getattr
  m68k: Switch to asm-generic/barrier.h
  m68k: Sort arch/m68k/include/asm/Kbuild

Pull tensa fixes from Chris Zankel:
 "This series includes fixes for potentially serious bugs in the
  routines spilling processor registers to stack, as well as other
  issues and compiler errors and warnings.

   - allow booting xtfpga on boards with new uBoot and >128MBytes memory
   - drop nonexistent GPIO32 support from fsf variant
   - don't select USE_GENERIC_SMP_HELPERS
   - enable common clock framework support, set up ethoc clock on xtfpga
   - wire up sched_setattr and sched_getattr syscalls.
   - fix system call to spill the processor registers to stack.
   - improve kernel macro to spill the processor registers
   - export ccount_freq symbol
   - fix undefined symbol warning"

* tag 'xtensa-next-20140224' of git://github.com/czankel/xtensa-linux:
  xtensa: wire up sched_setattr and sched_getattr syscalls
  xtensa: xtfpga: set ethoc clock frequency
  xtensa: xtfpga: use common clock framework
  xtensa: support common clock framework
  xtensa: no need to select USE_GENERIC_SMP_HELPERS
  xtensa: fsf: drop nonexistent GPIO32 support
  xtensa: don't pass high memory to bootmem allocator
  xtensa: fix fast_syscall_spill_registers
  xtensa: fix fast_syscall_spill_registers
  xtensa: save current register frame in fast_syscall_spill_registers_fixup
  xtensa: introduce spill_registers_kernel macro
  xtensa: export ccount_freq
  xtensa: fix warning '"CONFIG_OF" is not defined'

Since commit 77873803 "net_dma: mark broken" we no longer pin dma
engines active for the network-receive-offload use case.  As a result
the ->free_chan_resources() that occurs after the driver self test no
longer has a NET_DMA induced ->alloc_chan_resources() to back it up.  A
late firing irq can lead to ksoftirqd spinning indefinitely due to the
tasklet_disable() performed by ->free_chan_resources().  Only
->alloc_chan_resources() can clear this condition in affected kernels.

This problem has been present since commit 3e037454 "I/OAT: Add
support for MSI and MSI-X" in 2.6.24, but is now exposed. Given the
NET_DMA use case is deprecated we can revisit moving the driver to use
threaded irqs.  For now, just tear down the irq and tasklet properly by:

1/ Disable the irq from triggering the tasklet

2/ Disable the irq from re-arming

3/ Flush inflight interrupts

4/ Flush the timer

5/ Flush inflight tasklets

References:
https://lkml.org/lkml/2014/1/27/282
https://lkml.org/lkml/2014/2/19/672

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Reported-by: NMike Galbraith <bitbucket@online.de>
Reported-by: NStanislav Fomichev <stfomichev@yandex-team.ru>
Tested-by: NMike Galbraith <bitbucket@online.de>
Tested-by: NStanislav Fomichev <stfomichev@yandex-team.ru>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Pull SELinux endianness fix from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  SELinux: bigendian problems with filename trans rules

Pull s390 bug fixes from Martin Schwidefsky:
 "A couple of s390 bug fixes.  The PCI segment boundary issue is a nasty
  one as it can lead to data corruption"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/cio: Fix missing subchannels after CHPID configure on
  s390/pci/dma: use correct segment boundary size
  s390/compat: fix sys_sched_getattr compat wrapper
  s390/zcrypt: additional check to avoid overflow in msg-type 6 requests

Xtensa fixes for 3.14:
- allow booting xtfpga on boards with new uBoot and >128MBytes memory;
- drop nonexistent GPIO32 support from fsf variant;
- don't select USE_GENERIC_SMP_HELPERS;
- enable common clock framework support, set up ethoc clock on xtfpga;
- wire up sched_setattr and sched_getattr syscalls.
Signed-off-by: NChris Zankel <chris@zankel.net>

Pull ARM SoC fixes from Olof Johansson:
 "A collection of fixes for ARM platforms.  Most are fixes for DTS
  files, mostly from DT conversion on OMAP which is still finding a few
  issues here and there.

  There's a couple of small stale code removal patches that we usually
  queue for the next release instead, but they seemed harmless enough to
  bring in now.

  Also, a fix for backlight on some PXA platforms, and a cache
  configuration fix for Tegra, etc"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
  MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer
  ARM: tegra: only run PL310 init on systems with one
  ARM: tegra: Add head numbers to display controllers
  ARM: imx6: build pm-imx6q.c independently of CONFIG_PM
  ARM: tegra: fix RTC0 alias for Cardhu
  ARM: dove: dt: revert PMU interrupt controller node
  Documentation: dt: OMAP: Update Overo/Tobi
  ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi
  ARM: dts: omap3-tobi: Use the correct vendor prefix
  ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo
  ARM: OMAP2+: Remove legacy macros for zoom platforms
  ARM: OMAP2+: Remove MACH_NOKIA_N800
  ARM: dts: N900: add missing compatible property
  ARM: dts: N9/N950: fix boot hang with 3.14-rc1
  ARM: OMAP1: nokia770: enable tahvo-usb
  ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module
  ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module
  ARM: dts: omap3-gta04: Fix mmc1 properties.
  ARM: dts: omap3-gta04: Fix 'aux' gpio key flags.
  ARM: OMAP2+: add missing ARCH_HAS_OPP
  ...

Pull regulator fixes from Mark Brown:
 "Mostly unexciting driver fixes, plus one fix to lower the severity of
  the log message when we don't use an optional regulator - the fixes
  for ACPI system made this come up more often and it was correctly
  observed that it was causing undue concern for users"

* tag 'regulator-v3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: max14577: Fix invalid return value on DT parse success
  regulator: core: Change dummy supplies error message to a warning
  regulator: s5m8767: Add missing of_node_put
  regulator: s5m8767: Use of_get_child_by_name
  regulator: da9063: Bug fix when setting max voltage on LDOs 5-11

This patch excludes reserved-marker byte-position from oobfree->length
calculation. Thus all bytes from oobfree->offset till end of OOB are free.

CC: <stable@vger.kernel.org> # 3.13.x+
Signed-off-by: NPekon Gupta <pekon@ti.com>
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>

1) In current implementation, ecclayout->oobfree->offset is calculated with
 respect to ecclayout->eccpos[0] which is incorrect because ECC bytes may not
 be stored contiguously in OOB.
 So, this patch calculates ecclayout->oobfree->offset with respect to last
 ECC byte-position 'eccpos[ecclayout->eccbytes-1]'.

2) ECC layout of some ecc-schemes expects reserved-markers at specific eccpos[]
 which should not be over-written by any file-system metadata.
 So this patch aligns oobfree->offset taking into account of such markers.

CC: <stable@vger.kernel.org> # 3.13.x+
Tested-by: NEnric Balletbo i Serra <eballetbo@gmail.com>
Tested-by: NStefan Roese <sr@denx.de>
Signed-off-by: NPekon Gupta <pekon@ti.com>
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>

Fixes: commit a919e511
       mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe

Fixes ecclayout mismatch introduced in above commit for following ecc-schemes:
 - OMAP_ECC_BCH4_CODE_HW_DETECTION_SW
 - OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 However, this patch also touches other ecc-schemes as the fix required
 refactoring common code, into ecc-scheme specific code.

This patch aligns ecc-layout for below ecc-schemes as per reference [1],[2],[3]

 +---+------------+-------------++-------------+-------------+
 |OOB|BCH8_CODE_HW|BCH8_CODE_HW_||HAM1_CODE_HW |HAM1_CODE_HW |
 |pos|            | DETECTION_SW||(x8 device)  |(x16 device) |
 +---+------------+-------------++-------------+-------------+
 | 0 |BADBLK_MARK | BADBLK_MARK || BADBLK_MARK | BADBLK_MARK |
 | 1 |BADBLK_MARK | BADBLK_MARK || eccpos[0]   | BADBLK_MARK |
 | 2 | eccpos[0]  | eccpos[0]   || eccpos[1]   | eccpos[0]   |
 | 3 | eccpos[1]  | eccpos[1]   || eccpos[2]   | eccpos[1]   |
 | 4 | eccpos[2]  | eccpos[2]   || eccpos[3]   | eccpos[2]   |
 | 5 | eccpos[3]  | eccpos[3]   || eccpos[4]   | eccpos[3]   |
 | 6 | eccpos[4]  | eccpos[4]   || eccpos[5]   | eccpos[4]   |
 | 7 | eccpos[5]  | eccpos[5]   || eccpos[6]   | eccpos[5]   |
 | 8 | eccpos[6]  | eccpos[6]   || eccpos[7]   | eccpos[6]   |
 | 9 | eccpos[7]  | eccpos[7]   || eccpos[8]   | eccpos[7]   |
 |10 | eccpos[8]  | eccpos[8]   || eccpos[9]   | eccpos[8]   |
 |11 | eccpos[9]  | eccpos[9]   || eccpos[10]  | eccpos[9]   |
 |12 | eccpos[10] | eccpos[10]  || eccpos[11]  | eccpos[10]  |
 |13 | eccpos[11] | eccpos[11]  || oobfree[0]  | eccpos[11]  |
 |14 | eccpos[12] | eccpos[12]  || oobfree[1]  | oobfree[0]  |
 |15 | eccpos[13] | <reserved>  || oobfree[2]  | oobfree[1]  |
 +---+------------+-------------++-------------+-------------+
 |16 | eccpos[14] | eccpos[13]  || oobfree[3]  | oobfree[2]  |
 |...| [...]      | [...]       || [...]       | [...]       |
 |56 | eccpos[54] | eccpos[51]  || oobfree[43] | oobfree[42] |
 |57 | eccpos[55] | <reserved>  || oobfree[44] | oobfree[43] |
 +===+============+=============+==============+=============+
 |58 | oobfree[0] | oobfree[0]  || oobfree[45] | oobfree[44] |
 |59 | oobfree[1] | oobfree[1]  || oobfree[46] | oobfree[45] |
 |60 | oobfree[2] | oobfree[2]  || oobfree[47] | oobfree[46] |
 |61 | oobfree[3] | oobfree[3]  || oobfree[48] | oobfree[47] |
 |62 | oobfree[4] | oobfree[4]  || oobfree[49] | oobfree[48] |
 |63 | oobfree[5] | oobfree[5]  || oobfree[50] | oobfree[49] |
 +---+------------+-------------+--------------+-------------+

[1] ecc-layout expected by ROM code, as specified in SoC TRM under:
      Chapter="Initialization"
        Section="Device Initialization by ROM code"
            Sub-Section="Memory Booting"
                Heading="NAND"
                Figure="ECC Locations in NAND Spare Areas"

[2] ecc-layout updates in u-boot
    http://lists.denx.de/pipermail/u-boot/2013-November/167551.html

[3] u-boot configurations to match above ecc-layout are documented at
    https://processors.wiki.ti.com/index.php/Linux_Core_NAND_User%27s_Guide

CC: <stable@vger.kernel.org> # 3.13.x+
Reported-by: NEnric Balletbo Serra <eballetbo@iseebcn.com>
Tested-by: NEnric Balletbo i Serra <eballetbo@gmail.com>
Tested-by: NStefan Roese <sr@denx.de>
Signed-off-by: NPekon Gupta <pekon@ti.com>
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>

Pull timer fix from Thomas Gleixner:
 "Serialize the registration of a new sched_clock in the currently ARM
  only generic sched_clock facilty to avoid sched_clock havoc"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched_clock: Prevent callers from seeing half-updated data

Pull x86 fixes from Thomas Gleixner:

 - a bugfix which prevents a divide by 0 panic when the newly introduced
   try_msr_calibrate_tsc() fails

 - enablement of the Baytrail platform to utilize the newfangled msr
   based calibration

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: tsc: Add missing Baytrail frequency to the table
  x86, tsc: Fallback to normal calibration if fast MSR calibration fails

Pull irq fixes from Thomas Gleixner:
 "Another four fixlets to tame the ARM orion irq chip"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: orion: Fix getting generic chip pointer.
  irqchip: orion: clear stale interrupts in irq_startup
  irqchip: orion: use handle_edge_irq on bridge irqs
  irqchip: orion: clear bridge cause register on init

Pull USB fixes from Greg KH:
 "Here are a number of USB fixes for reported issues for 3.14-rc4

  The majority of these are for USB gadget, phy, and musb driver issues.
  And there's a few new device ids thrown in for good measure"

* tag 'usb-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: chipidea: need to mask when writting endptflush and endptprime
  usb: musb: correct use of schedule_delayed_work()
  usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP
  usb: gadget: fix NULL pointer dereference
  usb: gadget: printer: using gadget_is_otg to check otg support at runtime
  phy: let phy_provider_register be the last step in registering PHY
  phy-core: Don't allow building phy-core as a module
  phy-core: Don't propagate -ENOSUPP from phy_pm_runtime_get_sync to caller
  phy-core: phy_get: Leave error logging to the caller
  phy,phy-bcm-kona-usb2.c: Add dependency on HAS_IOMEM
  usb: musb: correct use of schedule_delayed_work()
  usb: musb: do not sleep in atomic context
  USB: serial: option: blacklist interface 4 for Cinterion PHS8 and PXS8
  USB: EHCI: add delay during suspend to prevent erroneous wakeups
  usb: gadget: bcm63xx_udc: fix build failure on DMA channel code
  usb: musb: do not sleep in atomic context
  usb: gadget: s3c2410_udc: Fix build error
  usb: musb: core: Fix remote-wakeup resume
  usb: musb: host: Fix SuperSpeed hub enumeration
  usb: musb: fix obex in g_nokia.ko causing kernel panic

Pull TTY revert from Greg KH:
 "Here is a single commit, a revert of a sysfs file change that ended up
  breaking a userspace tool"

* tag 'tty-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "tty: Set correct tty name in 'active' sysfs attribute"

Pull staging tree fix from Greg KH:
 "Here is a single android driver fix for 3.14-rc4 that fixes a reported
  problem in the binder driver"

* tag 'staging-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: binder: Fix death notifications

Pull char/misc fix from Greg KH:
 "Here is a single commit, to fix a reported problem in the mei driver"

* tag 'char-misc-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mei: set client's read_cb to NULL when flow control fails

Add myself as an additional maintainer for the Broadcom mobile
SoCs.
Signed-off-by: NMatt Porter <mporter@linaro.org>
Acked-by: NChristian Daudt <bcm@fixthebug.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge remote-tracking branches 'regulator/fix/da9063', 'regulator/fix/max14577' and 'regulator/fix/s5m8767' into regulator-linus

This reverts commit d8a5dc30.

This breaks plymouth installs, either because plymouth is using the file
"incorrectly" or because the patch is incorrect.  Either way, this needs
to be reverted until it is all figured out.
Reported-by: NJosh Boyer <jwboyer@fedoraproject.org>
Reported-by: NRay Strode <halfline@gmail.com>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Werner Fink <werner@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull scheduler fixes from Ingo Molnar:
 "Misc fixlets: a fair number of them resulting from the new
  SCHED_DEADLINE code"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/deadline: Remove useless dl_nr_total
  sched/deadline: Test for CPU's presence explicitly
  sched: Add 'flags' argument to sched_{set,get}attr() syscalls
  sched: Fix information leak in sys_sched_getattr()
  sched,numa: add cond_resched to task_numa_work
  sched/core: Make dl_b->lock IRQ safe
  sched/core: Fix sched_rt_global_validate
  sched/deadline: Fix overflow to handle period==0 and deadline!=0
  sched/deadline: Fix bad accounting of nr_running

Pull perf fixes from Ingo Molnar:
 "Misc fixlets from all around the place"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/uncore: Fix IVT/SNB-EP uncore CBOX NID filter table
  perf/x86: Correctly use FEATURE_PDCM
  perf, nmi: Fix unknown NMI warning
  perf trace: Fix ioctl 'request' beautifier build problems on !(i386 || x86_64) arches
  perf trace: Add fallback definition of EFD_SEMAPHORE
  perf list: Fix checking for supported events on older kernels
  perf tools: Handle PERF_RECORD_HEADER_EVENT_TYPE properly
  perf probe: Do not add offset twice to uprobe address
  perf/x86: Fix Userspace RDPMC switch
  perf/x86/intel/p6: Add userspace RDPMC quirk for PPro

Pull hwmon fix from Guenter Roeck:
 "Fix writing the minimum temperature in max1668 driver"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (max1668) Fix writing the minimum temperature

Pull xfs fixes from Dave Chinner:
 "This is the first pull request I've had to do for you, so I'm still
  sorting things out.  The reason I'm sending this and not Ben should be
  obvious from the first commit below - SGI has stepped down from the
  XFS maintainership role.  As such, I'd like to take another
  opportunity to thank them for their many years of effort maintaining
  XFS and supporting the XFS community that they developed from the
  ground up.

  So I haven't had time to work things like signed tags into my
  workflows yet, so this is just a repo branch I'm asking you to pull
  from.  And yes, I named the branch -rc4 because I wanted the fixes in
  rc4, not because the branch was for merging into -rc3.  Probably not
  right, either.

  Anyway, I should have everything sorted out by the time the next merge
  window comes around.  If there's anything that you don't like in the
  pull req, feel free to flame me unmercifully.

  The changes are fixes for recent regressions and important thinkos in
  verification code:

        - a log vector buffer alignment issue on ia32
        - timestamps on truncate got mangled
        - primary superblock CRC validation fixes and error message
          sanitisation"

* 'xfs-fixes-for-3.14-rc4' of git://oss.sgi.com/xfs/xfs:
  xfs: limit superblock corruption errors to actual corruption
  xfs: skip verification on initial "guess" superblock read
  MAINTAINERS: SGI no longer maintaining XFS
  xfs: xfs_sb_read_verify() doesn't flag bad crcs on primary sb
  xfs: ensure correct log item buffer alignment
  xfs: ensure correct timestamp updates from truncate

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

  * Handle PERF_RECORD_HEADER_EVENT_TYPE properly. (Jiri Olsa)

  * Fix checking for supported events on older kernels in
    'perf list' (Vince Weaver)

  * Do not add offset twice to uprobe address in
    'perf probe' (Masami Hiramatsu)

  * Fix perf trace's ioctl 'request' beautifier build problems
    on !(i386 || x86_64) arches (Arnaldo Carvalho de Melo)

  * Fix 'perf trace' build by adding a fallback definition for
    EFD_SEMAPHORE (Ben Hutchings)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This fixes bug introduced in 667a6b7a (regulator: max14577: Add missing
of_node_put). The DTS parsing function returned number of matched
regulators as success status which then was compared against 0 in probe.

Result was a probe fail after successful parsing the DTS:
max14577-regulator: probe of max14577-regulator failed with error 2
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviwed-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMark Brown <broonie@linaro.org>

irqchip mvebu fixes for v3.14

 - orion:
    - fixes for clearing bridge cause register, and clearing stale interrupts
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Pull devicetree fixes from Grant Likely:
 "Device tree compatible match order bug fix

  This branch contains a bug fix for the way devicetree code identifies
  the type of device.  Device drivers can contain a list of
  of_device_ids, but it more than one entry will match, then the device
  driver may choose the wrong one.  Commit 10535314, "match each node
  compatible against all given matches first", was queued for v3.14 but
  ended up causing other bugs.  Commit 06b29e76 attempted to fix it
  but it had other bugs.  Merely reverting the fix and waiting until
  v3.15 isn't a good option because there is code in v3.14 that depends
  on the revised behaviour to boot.

  This branch should finally fixes the problem correctly.  This time
  instead of just hoping that the patch is correct, this branch also
  adds new testcases that validate the behaviour.

  The changes in this branch are larger than I would like for a -rc
  pull, but moving the test case data out of out of arch/arm so that it
  could be validated on other architectures was important"

* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux:
  of: Add self test for of_match_node()
  of: Move testcase FDT data into drivers/of
  of: reimplement the matching method for __of_match_node()
  Revert "of: search the best compatible match first in __of_match_node()"

Pull watchdog fix from Wim Van Sebroeck:
 "It corrects the error code when no device was found for w83697hf_wdt"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: w83697hf_wdt: return ENODEV if no device was found

Enabling SPARSE_IRQ shows up a bug in the irq-orion bridge interrupt
handler. The bridge interrupt is implemented using a single generic
chip. Thus the parameter passed to irq_get_domain_generic_chip()
should always be zero.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Fixes: 9dbd90f1 ("irqchip: Add support for Marvell Orion SoCs")
Cc: <stable@vger.kernel.org> # v3.11+
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

This patch updates the CBOX PMU filters mapping tables for SNB-EP
and IVT (model 45 and 62 respectively).

The NID umask always comes in addition to another umask.
When set, the NID filter is applied.

The current mapping tables were missing some code/umask
combinations to account for the NID umask. This patch
fixes that.

Cc: mingo@elte.hu
Cc: ak@linux.intel.com
Reviewed-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140219131018.GA24475@quadSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The current code simply assumes Intel Arch PerfMon v2+ to have
the IA32_PERF_CAPABILITIES MSR; the SDM specifies that we should check
CPUID[1].ECX[15] (aka, FEATURE_PDCM) instead.

This was found by KVM which implements v2+ but didn't provide the
capabilities MSR. Change the code to DTRT; KVM will also implement the
MSR and return 0.

Cc: pbonzini@redhat.com
Reported-by: N"Michael S. Tsirkin" <mst@redhat.com>
Suggested-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140203132903.GI8874@twins.programming.kicks-ass.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

When using BTS on Core i7-4*, I get the below kernel warning.

$ perf record -c 1 -e branches:u ls
Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
 kernel:[  438.317893] Uhhuh. NMI received for unknown reason 31 on CPU 2.

Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
 kernel:[  438.317920] Do you have a strange power saving mode enabled?

Message from syslogd@labpc1501 at Nov 11 15:49:25 ...
 kernel:[  438.317945] Dazed and confused, but trying to continue

Make intel_pmu_handle_irq() take the full exit path when returning early.

Cc: eranian@google.com
Cc: peterz@infradead.org
Cc: mingo@kernel.org
Signed-off-by: NMarkus Metzger <markus.t.metzger@intel.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1392425048-5309-1-git-send-email-andi@firstfloor.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

ENDPTFLUSH and ENDPTPRIME registers are set by software and clear
by hardware. There is a bit for each endpoint. When we are setting
a bit for an endpoint we should make sure we do not touch other
endpoint bit. There is a race condition if the hardware clear the
bit between the read and the write in hw_write.

Cc: stable <stable@vger.kernel.org> # 3.11+
Signed-off-by: NPeter Chen <peter.chen@freescale.com>
Signed-off-by: NMatthieu CASTET <matthieu.castet@parrot.com>
Tested-by: NMichael Grzeschik <mgrzeschik@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>