提交 aa6092f9 编写于 作者: P Pekon Gupta 提交者: Brian Norris

mtd: nand: omap: fix ecclayout->oobfree->offset

1) In current implementation, ecclayout->oobfree->offset is calculated with
 respect to ecclayout->eccpos[0] which is incorrect because ECC bytes may not
 be stored contiguously in OOB.
 So, this patch calculates ecclayout->oobfree->offset with respect to last
 ECC byte-position 'eccpos[ecclayout->eccbytes-1]'.

2) ECC layout of some ecc-schemes expects reserved-markers at specific eccpos[]
 which should not be over-written by any file-system metadata.
 So this patch aligns oobfree->offset taking into account of such markers.

CC: <stable@vger.kernel.org> # 3.13.x+
Tested-by: NEnric Balletbo i Serra <eballetbo@gmail.com>
Tested-by: NStefan Roese <sr@denx.de>
Signed-off-by: NPekon Gupta <pekon@ti.com>
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
上级 eae39cb4
......@@ -1832,8 +1832,9 @@ static int omap_nand_probe(struct platform_device *pdev)
oob_index = 1;
for (i = 0; i < ecclayout->eccbytes; i++, oob_index++)
ecclayout->eccpos[i] = oob_index;
ecclayout->oobfree->offset = ecclayout->eccpos[0] +
ecclayout->eccbytes;
/* no reserved-marker in ecclayout for this ecc-scheme */
ecclayout->oobfree->offset =
ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
break;
case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
......@@ -1856,8 +1857,9 @@ static int omap_nand_probe(struct platform_device *pdev)
if (((i + 1) % nand_chip->ecc.bytes) == 0)
oob_index++;
}
ecclayout->oobfree->offset = ecclayout->eccpos[0] +
ecclayout->eccbytes;
/* include reserved-marker in ecclayout->oobfree calculation */
ecclayout->oobfree->offset = 1 +
ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
/* software bch library is used for locating errors */
nand_chip->ecc.priv = nand_bch_init(mtd,
nand_chip->ecc.size,
......@@ -1894,8 +1896,9 @@ static int omap_nand_probe(struct platform_device *pdev)
oob_index = BADBLOCK_MARKER_LENGTH;
for (i = 0; i < ecclayout->eccbytes; i++, oob_index++)
ecclayout->eccpos[i] = oob_index;
ecclayout->oobfree->offset = ecclayout->eccpos[0] +
ecclayout->eccbytes;
/* reserved marker already included in ecclayout->eccbytes */
ecclayout->oobfree->offset =
ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
/* This ECC scheme requires ELM H/W block */
if (is_elm_present(info, pdata->elm_of_node, BCH4_ECC) < 0) {
pr_err("nand: error: could not initialize ELM\n");
......@@ -1929,8 +1932,9 @@ static int omap_nand_probe(struct platform_device *pdev)
if (((i + 1) % nand_chip->ecc.bytes) == 0)
oob_index++;
}
ecclayout->oobfree->offset = ecclayout->eccpos[0] +
ecclayout->eccbytes;
/* include reserved-marker in ecclayout->oobfree calculation */
ecclayout->oobfree->offset = 1 +
ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
/* software bch library is used for locating errors */
nand_chip->ecc.priv = nand_bch_init(mtd,
nand_chip->ecc.size,
......@@ -1974,8 +1978,9 @@ static int omap_nand_probe(struct platform_device *pdev)
oob_index = BADBLOCK_MARKER_LENGTH;
for (i = 0; i < ecclayout->eccbytes; i++, oob_index++)
ecclayout->eccpos[i] = oob_index;
ecclayout->oobfree->offset = ecclayout->eccpos[0] +
ecclayout->eccbytes;
/* reserved marker already included in ecclayout->eccbytes */
ecclayout->oobfree->offset =
ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
break;
#else
pr_err("nand: error: CONFIG_MTD_NAND_OMAP_BCH not enabled\n");
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册