- 16 10月, 2008 20 次提交
-
-
由 Yinghai Lu 提交于
also print out irq no in /proc/interrups and /proc/stat in hex, so could tell bus/dev/func. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
loop with irq_desc list Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
so later don't need to compare with -1U Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
change names: irq_desc() ==> irq_desc_alloc __irq_desc() ==> irq_desc Also split a few of the uses in lowlevel x86 code. v2: need to check if desc is null in smp_irq_move_cleanup Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
so we don't get new one that we don't need it. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
So we could remove some duplicated calling to irq_desc v2: make sure irq_desc in init/main.c is not used without generic_hardirqs Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
remove irq limit checks - nr_irqs is dynamic and we expand anytime. v2: fix checking about result irq_cfg_without_new, so could use msi again v3: use irq_desc_without_new to check irq is valid Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
There are a handful of loops that go from 0 to nr_irqs and use get_irq_desc() on them. These would allocate all the irq_desc entries, regardless of the need for them. Use the smarter for_each_irq_desc() iterator that will only iterate over the present ones. v2: make sure arch without GENERIC_HARDIRQS work too Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
based on Eric's patch ... together mold it with dyn_array for irq_desc, will allcate kstat_irqs for nr_irq_desc alltogether if needed. -- at that point nr_cpus is known already. v2: make sure system without generic_hardirqs works they don't have irq_desc v3: fix merging v4: [mingo@elte.hu] fix typo [ mingo@elte.hu ] irq: build fix fix: arch/x86/xen/spinlock.c: In function 'xen_spin_lock_slow': arch/x86/xen/spinlock.c:90: error: 'struct kernel_stat' has no member named 'irqs' Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
preallocate 32 irq_2_pin entries, and use get_one_free_irq_2_pin() to get one more and link to irq_cfg if needed. so don't waste one where no irq is enabled. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
preallocate size is 32, and if it is not enough, irq_cfg will more via alloc_bootmem() or kzalloc(). (depending on how early we are in system setup) v2: fix typo about size of init_one_irq_cfg ... should use sizeof(struct irq_cfg) v3: according to Eric, change get_irq_cfg() to irq_cfg() v4: squash add irq_cfg_alloc in Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
add CONFIG_HAVE_SPARSE_IRQ to for use condensed array. Get rid of irq_desc[] array assumptions. Preallocate 32 irq_desc, and irq_desc() will try to get more. ( No change in functionality is expected anywhere, except the odd build failure where we missed a code site or where a crossing commit itroduces new irq_desc[] usage. ) v2: according to Eric, change get_irq_desc() to irq_desc() Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Until now, NR_IRQS was derived from black magic defines that had to be "large enough" to both accomodate NR_CPUS and MAX_NR_IO_APICs. This resulted in a way too large irq_desc[] array on most x86 systems. Especially with larger CPU masks, the size of irq_desc can spiral out of control quickly. So be smarter about it and use precise allocation instead: determine the default maximum possible IRQ number from the ACPI MADT. Use a minimum limit of at least 32 IRQs for broken BIOSes. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
fix non-APIC UP build: arch/x86/kernel/built-in.o: In function `setup_arch': : undefined reference to `pin_map_size' arch/x86/kernel/built-in.o: In function `setup_arch': : undefined reference to `first_free_entry' Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
also add first_free_entry and pin_map_size, which were NR_IRQS derived constants. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
so could spare some memory with small alignment in bootmem also tighten the alignment checking, and make print out less debug info. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
allow dyn-array in per_cpu area, allocated dynamically. usage: | /* in .h */ | struct kernel_stat { | struct cpu_usage_stat cpustat; | unsigned int *irqs; | }; | | /* in .c */ | DEFINE_PER_CPU(struct kernel_stat, kstat); | | DEFINE_PER_CPU_DYN_ARRAY_ADDR(per_cpu__kstat_irqs, per_cpu__kstat.irqs, sizeof(unsigned int), nr_irqs, sizeof(unsigned long), NULL); after setup_percpu()/per_cpu_alloc_dyn_array(), the dyn_array in per_cpu area is ready to use. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 15 10月, 2008 1 次提交
-
-
由 Bjorn Helgaas 提交于
Most if not all x86 platforms have an RTC device, but sometimes the RTC is not exposed as a PNP0b00/PNP0b01/PNP0b02 device in PNPBIOS or ACPI: http://bugzilla.kernel.org/show_bug.cgi?id=11580 https://bugzilla.redhat.com/show_bug.cgi?id=451188 It's best if we can discover the RTC via PNP because then we know which flavor of device it is, where it lives, and which IRQ it uses. But if we can't, we should register a platform device using the compiled-in RTC_PORT/RTC_IRQ resource assumptions. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Reported-by: NRik Theys <rik.theys@esat.kuleuven.be> Reported-by: shr_msn@yahoo.com.tw Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 10月, 2008 19 次提交
-
-
由 Alexander van Heukelum 提交于
After "dumpstack: x86: various small unification steps", the assembler gives the following compile error. The error is in dumpstack_64.c. {standard input}: Assembler messages: {standard input}:720: Error: Incorrect register `%rbx' used with `l' suffix {standard input}:1340: Error: Incorrect register `%r12' used with `l' suffix Indeed the suffix in get_bp() was wrong. Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
remove remainder of additional_cpus logic. We now just listen to the disabled_cpus value like we did for years. disabled_cpus is always >= 0 so no need for an extra check. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
additional_cpus=<x> parameter is dangerous and broken: for example if we boot additional_cpus=-2 on a stock dual-core system it will crash the box on bootup. So reduce the maze of code a bit by removingthe user-configurability angle. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
num_possible_cpus() can be > 1 when disabled CPUs have been accounted. Disabled CPUs are not in the cpu_present_map, so we can use num_present_cpus() as a safe indicator to switch to UP alternatives. Reported-by: NChuck Ebbert <cebbert@redhat.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: <stable@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexander van Heukelum 提交于
- define STACKSLOTS_PER_LINE and use it - define get_bp macro to hide the %%ebp/%%rbp difference - i386: check task==NULL in dump_trace, like x86_64 - i386: show_trace(NULL, ...) uses current automatically - x86_64: use [#%d] for die_counter, like i386 - whitespace and comments Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexander van Heukelum 提交于
- make kstack= and early_param - add oops=panic, setting panic_on_oops Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexander van Heukelum 提交于
- x86: Write log_lvl strings if available - start raw stack dumps on new line - i386: Remove extra indentation for raw stack dumps Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexander van Heukelum 提交于
- i386 and x86_64: always printk the 'data' parameter - i386: announce stack switch (irq -> normal) - i386: check if there is a stack switch before announcing it There is a warning that 'context' might come out corrupt in early boot. If this is true it should be fixed, not worked around. Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexander van Heukelum 提交于
- Add "end" parameter to valid_stack_ptr and print_context_stack - use sizeof(long) as the size of a word on the stack Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexander van Heukelum 提交于
- x86_64: use %p to print an address - make i386-version the same as the above The result should be the same on x86_64; on i386 the output only changes if CONFIG_KALLSYMS is turned off, in which case the address is printed twice. Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexander van Heukelum 提交于
For some reason die_nmi is still defined in traps.c for i386, but is found in dumpstack_64.c for x86_64. Move it to dumpstack_32.c Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexander van Heukelum 提交于
traps_32.c and traps_64.c are now equal. Move one to traps.c, delete the other one and change the Makefile Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexander van Heukelum 提交于
Use CONFIG_X86_64/CONFIG_X86_32 to condtionally compile the parts needed for x86_64 or i386 only. Runs a small userspace for a number of minimal configurations and boots the defconfigs. Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexander van Heukelum 提交于
- reordering include files - whitespace changes - comment changes - removed unused bad_intr() - make default_do_nmi static Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexander van Heukelum 提交于
Use task_pid_nr(tsk) instead of tsk->pid in do_general_protection. Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexander van Heukelum 提交于
This is the last user of clear_mem_error, which is defined only on i386. Expand the inline function and remove it from include/asm-x86/mach-default/mach_traps.h Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexander van Heukelum 提交于
Make io_check_error equal to the one on i386. Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexander van Heukelum 提交于
Use preempt_conditional_sti/cli in do_int3, like on x86_64. Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexander van Heukelum 提交于
- rename variable me -> tsk - get thread and tsk like i386 - expand used_math() - copy comment Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-