提交 1f8ff037 编写于 作者: Y Yinghai Lu 提交者: Ingo Molnar

x86: alloc dyn_array all together

so could spare some memory with small alignment in bootmem

also tighten the alignment checking, and make print out less debug info.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
上级 1f3fcd4b
......@@ -140,26 +140,31 @@ static void __init setup_cpu_pda_map(void)
*/
void __init setup_per_cpu_areas(void)
{
ssize_t size, old_size;
ssize_t size, old_size, da_size;
char *ptr;
int cpu;
unsigned long align = 1;
/* Setup cpu_pda map */
setup_cpu_pda_map();
/* Copy section for each CPU (we discard the original) */
old_size = PERCPU_ENOUGH_ROOM;
size = old_size + per_cpu_dyn_array_size();
da_size = per_cpu_dyn_array_size(&align);
align = max_t(unsigned long, PAGE_SIZE, align);
size = roundup(old_size + da_size, align);
printk(KERN_INFO "PERCPU: Allocating %zd bytes of per cpu data\n",
size);
for_each_possible_cpu(cpu) {
#ifndef CONFIG_NEED_MULTIPLE_NODES
ptr = alloc_bootmem_pages(size);
ptr = __alloc_bootmem(size, align,
__pa(MAX_DMA_ADDRESS));
#else
int node = early_cpu_to_node(cpu);
if (!node_online(node) || !NODE_DATA(node)) {
ptr = alloc_bootmem_pages(size);
ptr = __alloc_bootmem(size, align,
__pa(MAX_DMA_ADDRESS));
printk(KERN_INFO
"cpu %d has no node %d or node-local memory\n",
cpu, node);
......@@ -168,7 +173,8 @@ void __init setup_per_cpu_areas(void)
cpu, __pa(ptr));
}
else {
ptr = alloc_bootmem_pages_node(NODE_DATA(node), size);
ptr = __alloc_bootmem_node(NODE_DATA(node), size, align,
__pa(MAX_DMA_ADDRESS));
if (ptr)
printk(KERN_DEBUG "per cpu data for cpu%d on node%d at %016lx\n",
cpu, node, __pa(ptr));
......
......@@ -288,7 +288,7 @@ extern struct dyn_array *__per_cpu_dyn_array_start[], *__per_cpu_dyn_array_end[]
DEFINE_PER_CPU_DYN_ARRAY_ADDR(nameX, nameX, nrX, alignX, init_workX)
extern void pre_alloc_dyn_array(void);
extern unsigned long per_cpu_dyn_array_size(void);
extern unsigned long per_cpu_dyn_array_size(unsigned long *align);
extern void per_cpu_alloc_dyn_array(int cpu, char *ptr);
#endif /* __ASSEMBLY__ */
......
......@@ -394,10 +394,14 @@ static void __init setup_per_cpu_areas(void)
unsigned long size, i, old_size;
char *ptr;
unsigned long nr_possible_cpus = num_possible_cpus();
unsigned long align = 1;
unsigned da_size;
/* Copy section for each CPU (we discard the original) */
old_size = PERCPU_ENOUGH_ROOM;
size = ALIGN(old_size + per_cpu_dyn_array_size(), PAGE_SIZE);
da_size = per_cpu_dyn_array_size(&align);
align = max_t(unsigned long, PAGE_SIZE, align);
size = ALIGN(old_size + da_size, align);
ptr = alloc_bootmem_pages(size * nr_possible_cpus);
for_each_possible_cpu(i) {
......@@ -541,45 +545,78 @@ void __init __weak thread_info_cache_init(void)
void pre_alloc_dyn_array(void)
{
#ifdef CONFIG_HAVE_DYN_ARRAY
unsigned long size, phys = 0;
unsigned long total_size = 0, size, phys;
unsigned long max_align = 1;
struct dyn_array **daa;
char *ptr;
/* get the total size at first */
for (daa = __dyn_array_start ; daa < __dyn_array_end; daa++) {
struct dyn_array *da = *daa;
size = da->size * (*da->nr);
print_fn_descriptor_symbol("dyna_array %s ", da->name);
printk(KERN_CONT "size:%#lx nr:%d align:%#lx",
print_fn_descriptor_symbol("dyn_array %s ", da->name);
printk(KERN_CONT "size:%#lx nr:%d align:%#lx\n",
da->size, *da->nr, da->align);
*da->name = __alloc_bootmem(size, da->align, phys);
phys = virt_to_phys(*da->name);
total_size += roundup(size, da->align);
if (da->align > max_align)
max_align = da->align;
}
if (total_size)
printk(KERN_DEBUG "dyn_array total_size: %#lx\n",
total_size);
else
return;
/* allocate them all together */
max_align = max_t(unsigned long, max_align, PAGE_SIZE);
ptr = __alloc_bootmem_nopanic(total_size, max_align, 0);
if (!ptr)
panic("Can not alloc dyn_alloc\n");
phys = virt_to_phys(ptr);
for (daa = __dyn_array_start ; daa < __dyn_array_end; daa++) {
struct dyn_array *da = *daa;
size = da->size * (*da->nr);
print_fn_descriptor_symbol("dyn_array %s ", da->name);
phys = roundup(phys, da->align);
*da->name = phys_to_virt(phys);
printk(KERN_CONT " ==> [%#lx - %#lx]\n", phys, phys + size);
phys += size;
if (da->init_work)
da->init_work(da);
}
#endif
}
unsigned long per_cpu_dyn_array_size(void)
unsigned long per_cpu_dyn_array_size(unsigned long *align)
{
unsigned long total_size = 0;
#ifdef CONFIG_HAVE_DYN_ARRAY
unsigned long size;
struct dyn_array **daa;
unsigned max_align = 1;
for (daa = __per_cpu_dyn_array_start ; daa < __per_cpu_dyn_array_end; daa++) {
struct dyn_array *da = *daa;
size = da->size * (*da->nr);
print_fn_descriptor_symbol("per_cpu_dyna_array %s ", da->name);
print_fn_descriptor_symbol("per_cpu_dyn_array %s ", da->name);
printk(KERN_CONT "size:%#lx nr:%d align:%#lx\n",
da->size, *da->nr, da->align);
total_size += roundup(size, da->align);
if (da->align > max_align)
max_align = da->align;
}
if (total_size)
printk(KERN_DEBUG "per_cpu_dyna_array total_size: %#lx\n",
if (total_size) {
printk(KERN_DEBUG "per_cpu_dyn_array total_size: %#lx\n",
total_size);
*align = max_align;
}
#endif
return total_size;
}
......@@ -593,14 +630,11 @@ void per_cpu_alloc_dyn_array(int cpu, char *ptr)
void **array;
phys = virt_to_phys(ptr);
for (daa = __per_cpu_dyn_array_start ; daa < __per_cpu_dyn_array_end; daa++) {
struct dyn_array *da = *daa;
size = da->size * (*da->nr);
print_fn_descriptor_symbol("per_cpu_dyna_array %s ", da->name);
printk(KERN_CONT "size:%#lx nr:%d align:%#lx",
da->size, *da->nr, da->align);
print_fn_descriptor_symbol("per_cpu_dyn_array %s ", da->name);
phys = roundup(phys, da->align);
addr = (unsigned long)da->name;
......@@ -608,7 +642,8 @@ void per_cpu_alloc_dyn_array(int cpu, char *ptr)
array = (void **)addr;
*array = phys_to_virt(phys);
*da->name = *array; /* so init_work could use it directly */
printk(KERN_CONT " %p ==> [%#lx - %#lx]\n", array, phys, phys + size);
printk(KERN_CONT " ==> [%#lx - %#lx]\n", phys, phys + size);
phys += size;
if (da->init_work) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册