提交 · 6b5bf3f37f726cf35e647aaec9f157d3685b291e · openanolis / cloud-kernel

10 11月, 2019 40 次提交

net: usb: lan78xx: Connect PHY before registering MAC · 6b5bf3f3

由 Andrew Lunn 提交于 10月 17, 2019

[ Upstream commit 38b4fe320119859c11b1dc06f6b4987a16344fa1 ]

As soon as the netdev is registers, the kernel can start using the
interface. If the driver connects the MAC to the PHY after the netdev
is registered, there is a race condition where the interface can be
opened without having the PHY connected.

Change the order to close this race condition.

Fixes: 92571a1a ("lan78xx: Connect phy early")
Reported-by: NDaniel Wagner <dwagner@suse.de>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NDaniel Wagner <dwagner@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

6b5bf3f3

net: bcmgenet: reset 40nm EPHY on energy detect · 07c62fc7

由 Doug Berger 提交于 10月 16, 2019

[ Upstream commit 25382b991d252aed961cd434176240f9de6bb15f ]

The EPHY integrated into the 40nm Set-Top Box devices can falsely
detect energy when connected to a disabled peer interface. When the
peer interface is enabled the EPHY will detect and report the link
as active, but on occasion may get into a state where it is not
able to exchange data with the connected GENET MAC. This issue has
not been observed when the link parameters are auto-negotiated;
however, it has been observed with a manually configured link.

It has been empirically determined that issuing a soft reset to the
EPHY when energy is detected prevents it from getting into this bad
state.

Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
Signed-off-by: NDoug Berger <opendmb@gmail.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

07c62fc7

net: phy: bcm7xxx: define soft_reset for 40nm EPHY · 6d3ccc2a

由 Doug Berger 提交于 10月 16, 2019

[ Upstream commit fe586b823372a9f43f90e2c6aa0573992ce7ccb7 ]

The internal 40nm EPHYs use a "Workaround for putting the PHY in
IDDQ mode." These PHYs require a soft reset to restore functionality
after they are powered back up.

This commit defines the soft_reset function to use genphy_soft_reset
during phy_init_hw to accommodate this.

Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Signed-off-by: NDoug Berger <opendmb@gmail.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

6d3ccc2a

net: bcmgenet: don't set phydev->link from MAC · 97cc6827

由 Doug Berger 提交于 10月 16, 2019

[ Upstream commit 7de48402faa32298c3551ea32c76ccb4f9d3025d ]

When commit 28b2e0d2 ("net: phy: remove parameter new_link from
phy_mac_interrupt()") removed the new_link parameter it set the
phydev->link state from the MAC before invoking phy_mac_interrupt().

However, once commit 88d6272acaaa ("net: phy: avoid unneeded MDIO
reads in genphy_read_status") was added this initialization prevents
the proper determination of the connection parameters by the function
genphy_read_status().

This commit removes that initialization to restore the proper
functionality.

Fixes: 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status")
Signed-off-by: NDoug Berger <opendmb@gmail.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

97cc6827

net: dsa: b53: Do not clear existing mirrored port mask · 57e286f6

由 Florian Fainelli 提交于 10月 05, 2019

[ Upstream commit c763ac436b668d7417f0979430ec0312ede4093d ]

Clearing the existing bitmask of mirrored ports essentially prevents us
from capturing more than one port at any given time. This is clearly
wrong, do not clear the bitmask prior to setting up the new port.
Reported-by: NHubert Feurstein <h.feurstein@gmail.com>
Fixes: ed3af5fd ("net: dsa: b53: Add support for port mirroring")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

57e286f6

net/mlx5e: Fix ethtool self test: link speed · db91be8e

由 Aya Levin 提交于 10月 02, 2019

[ Upstream commit 534e7366f41b0c689b01af4375aefcd1462adedf ]

Ethtool self test contains a test for link speed. This test reads the
PTYS register and determines whether the current speed is valid or not.
Change current implementation to use the function mlx5e_port_linkspeed()
that does the same check and fails when speed is invalid. This code
redundancy lead to a bug when mlx5e_port_linkspeed() was updated with
expended speeds and the self test was not.

Fixes: 2c81bfd5 ("net/mlx5e: Move port speed code from en_ethtool.c to en/port.c")
Signed-off-by: NAya Levin <ayal@mellanox.com>
Reviewed-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

db91be8e

r8169: fix wrong PHY ID issue with RTL8168dp · 5eb1967b

由 Heiner Kallweit 提交于 11月 01, 2019

[ Upstream commit 62bdc8fd1c21d4263ebd18bec57f82532d09249f ]

As reported in [0] at least one RTL8168dp version has problems
establishing a link. This chip version has an integrated RTL8211b PHY,
however the chip seems to report a wrong PHY ID, resulting in a wrong
PHY driver (for Generic Realtek PHY) being loaded.
Work around this issue by adding a hook to r8168dp_2_mdio_read()
for returning the correct PHY ID.

[0] https://bbs.archlinux.org/viewtopic.php?id=246508

Fixes: 242cd9b5 ("r8169: use phy_resume/phy_suspend")
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

5eb1967b

net/mlx5e: Fix handling of compressed CQEs in case of low NAPI budget · 9e7c4fa2

由 Maxim Mikityanskiy 提交于 9月 16, 2019

[ Upstream commit 9df86bdb6746d7fcfc2fda715f7a7c3d0ddb2654 ]

When CQE compression is enabled, compressed CQEs use the following
structure: a title is followed by one or many blocks, each containing 8
mini CQEs (except the last, which may contain fewer mini CQEs).

Due to NAPI budget restriction, a complete structure is not always
parsed in one NAPI run, and some blocks with mini CQEs may be deferred
to the next NAPI poll call - we have the mlx5e_decompress_cqes_cont call
in the beginning of mlx5e_poll_rx_cq. However, if the budget is
extremely low, some blocks may be left even after that, but the code
that follows the mlx5e_decompress_cqes_cont call doesn't check it and
assumes that a new CQE begins, which may not be the case. In such cases,
random memory corruptions occur.

An extremely low NAPI budget of 8 is used when busy_poll or busy_read is
active.

This commit adds a check to make sure that the previous compressed CQE
has been completely parsed after mlx5e_decompress_cqes_cont, otherwise
it prevents a new CQE from being fetched in the middle of a compressed
CQE.

This commit fixes random crashes in __build_skb, __page_pool_put_page
and other not-related-directly places, that used to happen when both CQE
compression and busy_poll/busy_read were enabled.

Fixes: 7219ab34 ("net/mlx5e: CQE compression")
Signed-off-by: NMaxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

9e7c4fa2

selftests: fib_tests: add more tests for metric update · 0c3355cc

由 Paolo Abeni 提交于 10月 26, 2019

[ Upstream commit 37de3b354150450ba12275397155e68113e99901 ]

This patch adds two more tests to ipv4_addr_metric_test() to
explicitly cover the scenarios fixed by the previous patch.
Suggested-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

0c3355cc

ipv4: fix route update on metric change. · b166e883

由 Paolo Abeni 提交于 10月 26, 2019

[ Upstream commit 0b834ba00ab5337e938c727e216e1f5249794717 ]

Since commit af4d768a ("net/ipv4: Add support for specifying metric
of connected routes"), when updating an IP address with a different metric,
the associated connected route is updated, too.

Still, the mentioned commit doesn't handle properly some corner cases:

$ ip addr add dev eth0 192.168.1.0/24
$ ip addr add dev eth0 192.168.2.1/32 peer 192.168.2.2
$ ip addr add dev eth0 192.168.3.1/24
$ ip addr change dev eth0 192.168.1.0/24 metric 10
$ ip addr change dev eth0 192.168.2.1/32 peer 192.168.2.2 metric 10
$ ip addr change dev eth0 192.168.3.1/24 metric 10
$ ip -4 route
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.0
192.168.2.2 dev eth0 proto kernel scope link src 192.168.2.1
192.168.3.0/24 dev eth0 proto kernel scope link src 192.168.2.1 metric 10

Only the last route is correctly updated.

The problem is the current test in fib_modify_prefix_metric():

	if (!(dev->flags & IFF_UP) ||
	    ifa->ifa_flags & (IFA_F_SECONDARY | IFA_F_NOPREFIXROUTE) ||
	    ipv4_is_zeronet(prefix) ||
	    prefix == ifa->ifa_local || ifa->ifa_prefixlen == 32)

Which should be the logical 'not' of the pre-existing test in
fib_add_ifaddr():

	if (!ipv4_is_zeronet(prefix) && !(ifa->ifa_flags & IFA_F_SECONDARY) &&
	    (prefix != addr || ifa->ifa_prefixlen < 32))

To properly negate the original expression, we need to change the last
logical 'or' to a logical 'and'.

Fixes: af4d768a ("net/ipv4: Add support for specifying metric of connected routes")
Reported-and-suggested-by: NBeniamino Galvani <bgalvani@redhat.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

b166e883

net: add READ_ONCE() annotation in __skb_wait_for_more_packets() · cd3bcb44