- 29 1月, 2008 40 次提交
-
-
由 Tomas Winkler 提交于
This patch moves iwl4965_get_dma_hi_address function to iwl-headers.h as iwl_get_dma_hi_address. This function will be used in more chipsets than only 4965. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This function removes redundant code in iwl4965_tx_cmd function, leftovers of previous design. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This adds code and table data for channel switching on NPHYs. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This adds some code to init the 2055 radio. This patch adds two files "tables_nphy.h" and "tables_nphy.c" Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Add boardflags-high. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Add the register definitions for the Broadcom 2055 N-radio. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Helge Deller 提交于
Convert optional struct size checks to non-optional compile-time checks. Furthermore BUILD_BUG_ON() which will be optimized away by the compiler. Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This patch adds support for new firmware. Old firmware is still supported until July 2008. To get new firmware, go to ftp://ftp.linksys.com/opensourcecode/wrt150nv11/1.51.3/ and download the tarball. We don't have a smaller tarball, yet. That will be fixed later. You can extract firmware out of the "wl_ap.o" file contained in this tarball using latest fwcutter. You must pass the option --unsupported to fwcutter. Fwcutter-010 with official support for a new firmware image will be released soon. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Buesch 提交于
This fixes reading of the high 16 bits of the radio ID on new devices. 2055 radios want lo16 to be read first. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
For TX rings the queue_idx should start at IEEE80211_TX_QUEUE_DATA0 and for each followup ring this index needs to be increased. For the RX ring the queue_idx should be set to 0. We don't need to initialize the tx_params. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
rt2500usb and rt73usb data and desc pointer initialization was incorrect because it was using uninitialized variables to determine the length. In addition rt2500usb used skb_pull and removed the ieee80211 from each received frame instead of using skb_trim to remove the device descriptor from the frame. Finally this also fixes the descriptor override when 4 byte aligning occured. We still need a completely valid descriptor when using the TX/RX dumping capabilities in debugfs. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This adds the initval filenames for the N-PHY firmware. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Use the length of the variable section of the beacon instead of the whole beacon length for bounds checking. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This queues frames flagged as "send after DTIM" by mac80211 on the special multicast queue. The firmware will take care to send the packet after the DTIM. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes the template upload locking. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes uploading of the beacon data and writing of the TIM and DTIM offsets. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This patch (based on Ron Rindjunsky's) creates a framework for a unified way to pass BSS configuration to drivers that require the information, e.g. for implementing power save mode. This patch introduces new ieee80211_bss_conf structure that is passed to the driver via the new bss_info_changed() callback when the BSS configuration changes. This new BSS configuration infrastructure adds the following new features: * drivers are notified of their association AID * drivers are notified of association status and replaces the erp_ie_changed() callback. The patch also does the relevant driver updates for the latter change. Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Wu 提交于
Mattias Nissler's "clean up rate selection" patch incorrectly changes the behavior of txrate setting in sta_info. This patch backs out parts of the rate selection consolidation in order to fix this issue for now. Signed-off-by: NMichael Wu <flamingice@sourmilk.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch enables the A-MPDU Rx flow. it contains several adjustments to new mac80211 A-MPDU Rx flow. Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This patch fixes an oops which was introduced as a regression by commit fd640775bd16e1df50c867cc547af0, on the patch titled, "mac80211: dont use interface indices in drivers". ieee80211_generic_frame_duration() now relies on sdata->flags which itself gets set upon bringing the interface up. We check for the virtual interface now before setting the rate duration registers. After the mode changes are introduced onto mac80211 we should revisit these changes. This patch was tested on the following cards: 1) BG card: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) RF2112A 2GHz radio found (0x46) 2) ABG card: Atheros AR5213A chip found (MAC: 0x59,PHY: 0x43) RF5112A multiband radio found (0x36) Signed-off-by: NLuis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This implements station handling from userspace via cfg80211 in mac80211. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This patch implements the cfg80211 hooks for configuring beaconing on an access point interface in mac80211. While doing so, it fixes a number of races that could badly crash the machine when the beacon is changed while being requested by the driver. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Drivers that support mixed AP/STA operation may well need to know the type of a virtual interface when iterating over them. The easiest way to support that is to move the interface type variable into the vif structure. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This patch gets rid of the if_id stuff where possible in favour of a new per-virtual-interface structure "struct ieee80211_vif". This structure is located at the end of the per-interface structure and contains a variable length driver-use data area. This has two advantages: * removes the need to look up interfaces by if_id, this is better for working with network namespaces and performance * allows drivers to store and retrieve per-interface data without having to allocate own lists/hash tables Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Wu 提交于
This patch adds a mac80211 based wireless driver for the rtl8180 and rtl8185 PCI wireless cards. Also included are some rtl8187 changes required due to the relationship between that driver and this one. Michael Wu is primarily responsible for the initial driver and rtl8185 support. Andreas Merello provided the additional rtl8180 support. Thanks to Jukka Ruohonen for the donating a rtl8185 card! It was very helpful for the rtl8225z2 code. The Signed-off-by information below is collected from the individual patches submitted to wireless-2.6 before merging this driver upstream. Signed-off-by: NAndrea Merello <andreamrl@tiscali.it> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NMichael Wu <flamingice@sourmilk.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jiri Slaby 提交于
add ath5k wireless driver Portions of this driver are covered by one or both of the ISC and 3-clause BSD licenses. Specific license information is cited at the top of each file. Acked-by and Signed-off-by information is collected from individual patches as collected in the wireless-2.6 tree prior to upstream submission. Acked-by: NMatthew W. S. Bell <mentor@madwifi.org> Acked-by: NMichael Taylor <mike.taylor@apprion.com> Acked-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NBradley M. Kuhn <bkuhn@softwarefreedom.org> Signed-off-by: NBruno Randolf <bruno@thinktube.com> Signed-off-by: NDave Young <hidave.darkstar@gmail.com> Signed-off-by: NFrancesco Gringoli <francesco.gringoli@ing.unibs.it> Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NKaren Sandler <karen@softwarefreedom.org> Signed-off-by: NKrzysztof Halasa <khc@pm.waw.pl> Signed-off-by: NLuis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: NMatt Norwood <norwood@softwarefreedom.org> Signed-off-by: NNick Kossifidis <mickflemm@gmail.com> Signed-off-by: NRichard Fontana <fontana@softwarefreedom.org> Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NUlrich Meis <meis@nets.rwth-aachen.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
As suggested in "b43: Remove PIO support"... Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
If the third PCMCIA ID string specifies the MAC chip, the fourth ID string doesn't need to be matched. Even if it's different, it will be compatible with the driver. This ensures that other different revisions of the card will be supported. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes a sparse warning about weird locking. The spinlock is not needed, so simply remove it. This also adds some sanity checks to the PHY and radio locking to protect against recursive locking. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes the PHY routing bit handling. This is needed for N-PHY. No functional change to A-PHY and G-PHY code. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This patch adds all register definitions for the N-PHY. This adds two new files: nphy.h and nphy.c No functional changes to existing code. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This patch fixes RX packet alignment issues in the zd1211rw driver. This is based on a patch by Johannes Berg. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Miguel Botón 提交于
This patch fixes a compilation warning in 'iwl-4965.c'. "warning: format ‘%d’ expects type ‘int’, but argument 3 has type ‘long unsigned int’" Signed-off-by: Miguel Botón <mboton@gmail.com Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
rt2500usb and rt73usb store the descriptor in different places. This means we should move the initialization of the 2 pointers to the driver callback function fill_rxdone(). Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Prior to enabling the radio rt2x00lib should go through all rings and for each entry should call the callback function init_txentry() and init_rxentry(). Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Use the MY_BSS descriptor field to determine if the received frame belongs to the same BSS as the interface. This can be used by rxdone to determine if the frame should be updated or not. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Send the skb structure with write_tx_desc() and use the skbdesc structure to read all information about the frame. This saves several arguments in the function definition and it is easier to send more information later as well. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
The packet filter flags don't belong in the interface structure because they are device based instead of interface based. So move the filter fields out of struct interface and into rt2x00_dev. Additionally we shouldn't change the filter based on the working mode, if such a thing is needed than mac80211 should have done that. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
suspend & resume was broken since it called rt2x00mac_start() and rt2x00mac_stop() which would fail to execute because the DEVICE_PRESENT flag was not set. Move the start and stop handlers into rt2x00lib.c which are called from rt2x00mac_start() and rt2x00mac_stop() after they have checked the DEVICE_PRESENT flag, while suspend and resume handlers can directly call those functions. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-