提交 5dfdaf58 编写于 作者: J Johannes Berg 提交者: David S. Miller

mac80211: add beacon configuration via cfg80211

This patch implements the cfg80211 hooks for configuring beaconing
on an access point interface in mac80211. While doing so, it fixes
a number of races that could badly crash the machine when the
beacon is changed while being requested by the driver.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 51fb61e7
......@@ -10,6 +10,7 @@
#include <linux/nl80211.h>
#include <linux/rtnetlink.h>
#include <net/net_namespace.h>
#include <linux/rcupdate.h>
#include <net/cfg80211.h>
#include "ieee80211_i.h"
#include "cfg.h"
......@@ -294,6 +295,158 @@ static int ieee80211_get_station(struct wiphy *wiphy, struct net_device *dev,
return 0;
}
/*
* This handles both adding a beacon and setting new beacon info
*/
static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
struct beacon_parameters *params)
{
struct beacon_data *new, *old;
int new_head_len, new_tail_len;
int size;
int err = -EINVAL;
old = sdata->u.ap.beacon;
/* head must not be zero-length */
if (params->head && !params->head_len)
return -EINVAL;
/*
* This is a kludge. beacon interval should really be part
* of the beacon information.
*/
if (params->interval) {
sdata->local->hw.conf.beacon_int = params->interval;
if (ieee80211_hw_config(sdata->local))
return -EINVAL;
/*
* We updated some parameter so if below bails out
* it's not an error.
*/
err = 0;
}
/* Need to have a beacon head if we don't have one yet */
if (!params->head && !old)
return err;
/* sorry, no way to start beaconing without dtim period */
if (!params->dtim_period && !old)
return err;
/* new or old head? */
if (params->head)
new_head_len = params->head_len;
else
new_head_len = old->head_len;
/* new or old tail? */
if (params->tail || !old)
/* params->tail_len will be zero for !params->tail */
new_tail_len = params->tail_len;
else
new_tail_len = old->tail_len;
size = sizeof(*new) + new_head_len + new_tail_len;
new = kzalloc(size, GFP_KERNEL);
if (!new)
return -ENOMEM;
/* start filling the new info now */
/* new or old dtim period? */
if (params->dtim_period)
new->dtim_period = params->dtim_period;
else
new->dtim_period = old->dtim_period;
/*
* pointers go into the block we allocated,
* memory is | beacon_data | head | tail |
*/
new->head = ((u8 *) new) + sizeof(*new);
new->tail = new->head + new_head_len;
new->head_len = new_head_len;
new->tail_len = new_tail_len;
/* copy in head */
if (params->head)
memcpy(new->head, params->head, new_head_len);
else
memcpy(new->head, old->head, new_head_len);
/* copy in optional tail */
if (params->tail)
memcpy(new->tail, params->tail, new_tail_len);
else
if (old)
memcpy(new->tail, old->tail, new_tail_len);
rcu_assign_pointer(sdata->u.ap.beacon, new);
synchronize_rcu();
kfree(old);
return ieee80211_if_config_beacon(sdata->dev);
}
static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
struct beacon_parameters *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct beacon_data *old;
if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
return -EINVAL;
old = sdata->u.ap.beacon;
if (old)
return -EALREADY;
return ieee80211_config_beacon(sdata, params);
}
static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev,
struct beacon_parameters *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct beacon_data *old;
if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
return -EINVAL;
old = sdata->u.ap.beacon;
if (!old)
return -ENOENT;
return ieee80211_config_beacon(sdata, params);
}
static int ieee80211_del_beacon(struct wiphy *wiphy, struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct beacon_data *old;
if (sdata->vif.type != IEEE80211_IF_TYPE_AP)
return -EINVAL;
old = sdata->u.ap.beacon;
if (!old)
return -ENOENT;
rcu_assign_pointer(sdata->u.ap.beacon, NULL);
synchronize_rcu();
kfree(old);
return ieee80211_if_config_beacon(dev);
}
struct cfg80211_ops mac80211_config_ops = {
.add_virtual_intf = ieee80211_add_iface,
.del_virtual_intf = ieee80211_del_iface,
......@@ -302,5 +455,8 @@ struct cfg80211_ops mac80211_config_ops = {
.del_key = ieee80211_del_key,
.get_key = ieee80211_get_key,
.set_default_key = ieee80211_config_default_key,
.add_beacon = ieee80211_add_beacon,
.set_beacon = ieee80211_set_beacon,
.del_beacon = ieee80211_del_beacon,
.get_station = ieee80211_get_station,
};
......@@ -124,7 +124,6 @@ __IEEE80211_IF_FILE(flags);
/* AP attributes */
IEEE80211_IF_FILE(num_sta_ps, u.ap.num_sta_ps, ATOMIC);
IEEE80211_IF_FILE(dtim_period, u.ap.dtim_period, DEC);
IEEE80211_IF_FILE(dtim_count, u.ap.dtim_count, DEC);
IEEE80211_IF_FILE(num_beacons, u.ap.num_beacons, DEC);
IEEE80211_IF_FILE(force_unicast_rateidx, u.ap.force_unicast_rateidx, DEC);
......@@ -138,26 +137,6 @@ static ssize_t ieee80211_if_fmt_num_buffered_multicast(
}
__IEEE80211_IF_FILE(num_buffered_multicast);
static ssize_t ieee80211_if_fmt_beacon_head_len(
const struct ieee80211_sub_if_data *sdata, char *buf, int buflen)
{
if (sdata->u.ap.beacon_head)
return scnprintf(buf, buflen, "%d\n",
sdata->u.ap.beacon_head_len);
return scnprintf(buf, buflen, "\n");
}
__IEEE80211_IF_FILE(beacon_head_len);
static ssize_t ieee80211_if_fmt_beacon_tail_len(
const struct ieee80211_sub_if_data *sdata, char *buf, int buflen)
{
if (sdata->u.ap.beacon_tail)
return scnprintf(buf, buflen, "%d\n",
sdata->u.ap.beacon_tail_len);
return scnprintf(buf, buflen, "\n");
}
__IEEE80211_IF_FILE(beacon_tail_len);
/* WDS attributes */
IEEE80211_IF_FILE(peer, u.wds.remote_addr, MAC);
......@@ -192,14 +171,11 @@ static void add_ap_files(struct ieee80211_sub_if_data *sdata)
DEBUGFS_ADD(drop_unencrypted, ap);
DEBUGFS_ADD(ieee802_1x_pac, ap);
DEBUGFS_ADD(num_sta_ps, ap);
DEBUGFS_ADD(dtim_period, ap);
DEBUGFS_ADD(dtim_count, ap);
DEBUGFS_ADD(num_beacons, ap);
DEBUGFS_ADD(force_unicast_rateidx, ap);
DEBUGFS_ADD(max_ratectrl_rateidx, ap);
DEBUGFS_ADD(num_buffered_multicast, ap);
DEBUGFS_ADD(beacon_head_len, ap);
DEBUGFS_ADD(beacon_tail_len, ap);
}
static void add_wds_files(struct ieee80211_sub_if_data *sdata)
......@@ -281,14 +257,11 @@ static void del_ap_files(struct ieee80211_sub_if_data *sdata)
DEBUGFS_DEL(drop_unencrypted, ap);
DEBUGFS_DEL(ieee802_1x_pac, ap);
DEBUGFS_DEL(num_sta_ps, ap);
DEBUGFS_DEL(dtim_period, ap);
DEBUGFS_DEL(dtim_count, ap);
DEBUGFS_DEL(num_beacons, ap);
DEBUGFS_DEL(force_unicast_rateidx, ap);
DEBUGFS_DEL(max_ratectrl_rateidx, ap);
DEBUGFS_DEL(num_buffered_multicast, ap);
DEBUGFS_DEL(beacon_head_len, ap);
DEBUGFS_DEL(beacon_tail_len, ap);
}
static void del_wds_files(struct ieee80211_sub_if_data *sdata)
......
......@@ -321,10 +321,17 @@ static int ieee80211_stop(struct net_device *dev)
dev_mc_unsync(local->mdev, dev);
/* down all dependent devices, that is VLANs */
/* APs need special treatment */
if (sdata->vif.type == IEEE80211_IF_TYPE_AP) {
struct ieee80211_sub_if_data *vlan, *tmp;
struct beacon_data *old_beacon = sdata->u.ap.beacon;
/* remove beacon */
rcu_assign_pointer(sdata->u.ap.beacon, NULL);
synchronize_rcu();
kfree(old_beacon);
/* down all dependent devices, that is VLANs */
list_for_each_entry_safe(vlan, tmp, &sdata->u.ap.vlans,
u.vlan.list)
dev_close(vlan->dev);
......
......@@ -190,9 +190,14 @@ typedef ieee80211_txrx_result (*ieee80211_tx_handler)
typedef ieee80211_txrx_result (*ieee80211_rx_handler)
(struct ieee80211_txrx_data *rx);
struct beacon_data {
u8 *head, *tail;
int head_len, tail_len;
int dtim_period;
};
struct ieee80211_if_ap {
u8 *beacon_head, *beacon_tail;
int beacon_head_len, beacon_tail_len;
struct beacon_data *beacon;
struct list_head vlans;
......@@ -205,7 +210,7 @@ struct ieee80211_if_ap {
u8 tim[sizeof(unsigned long) * BITS_TO_LONGS(IEEE80211_MAX_AID + 1)];
atomic_t num_sta_ps; /* number of stations in PS mode */
struct sk_buff_head ps_bc_buf;
int dtim_period, dtim_count;
int dtim_count;
int force_unicast_rateidx; /* forced TX rateidx for unicast frames */
int max_ratectrl_rateidx; /* max TX rateidx for rate control */
int num_beacons; /* number of TXed beacon frames for this BSS */
......@@ -360,14 +365,11 @@ struct ieee80211_sub_if_data {
struct dentry *drop_unencrypted;
struct dentry *ieee802_1x_pac;
struct dentry *num_sta_ps;
struct dentry *dtim_period;
struct dentry *dtim_count;
struct dentry *num_beacons;
struct dentry *force_unicast_rateidx;
struct dentry *max_ratectrl_rateidx;
struct dentry *num_buffered_multicast;
struct dentry *beacon_head_len;
struct dentry *beacon_tail_len;
} ap;
struct {
struct dentry *channel_use;
......
......@@ -126,7 +126,6 @@ void ieee80211_if_set_type(struct net_device *dev, int type)
sdata->u.vlan.ap = NULL;
break;
case IEEE80211_IF_TYPE_AP:
sdata->u.ap.dtim_period = 2;
sdata->u.ap.force_unicast_rateidx = -1;
sdata->u.ap.max_ratectrl_rateidx = -1;
skb_queue_head_init(&sdata->u.ap.ps_bc_buf);
......@@ -207,8 +206,7 @@ void ieee80211_if_reinit(struct net_device *dev)
}
}
kfree(sdata->u.ap.beacon_head);
kfree(sdata->u.ap.beacon_tail);
kfree(sdata->u.ap.beacon);
while ((skb = skb_dequeue(&sdata->u.ap.ps_bc_buf))) {
local->total_ps_buffered--;
......
......@@ -1628,7 +1628,8 @@ void ieee80211_tx_pending(unsigned long data)
static void ieee80211_beacon_add_tim(struct ieee80211_local *local,
struct ieee80211_if_ap *bss,
struct sk_buff *skb)
struct sk_buff *skb,
struct beacon_data *beacon)
{
u8 *pos, *tim;
int aid0 = 0;
......@@ -1644,7 +1645,7 @@ static void ieee80211_beacon_add_tim(struct ieee80211_local *local,
IEEE80211_MAX_AID+1);
if (bss->dtim_count == 0)
bss->dtim_count = bss->dtim_period - 1;
bss->dtim_count = beacon->dtim_period - 1;
else
bss->dtim_count--;
......@@ -1652,7 +1653,7 @@ static void ieee80211_beacon_add_tim(struct ieee80211_local *local,
*pos++ = WLAN_EID_TIM;
*pos++ = 4;
*pos++ = bss->dtim_count;
*pos++ = bss->dtim_period;
*pos++ = beacon->dtim_period;
if (bss->dtim_count == 0 && !skb_queue_empty(&bss->ps_bc_buf))
aid0 = 1;
......@@ -1700,44 +1701,43 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
struct ieee80211_sub_if_data *sdata = NULL;
struct ieee80211_if_ap *ap = NULL;
struct rate_selection rsel;
u8 *b_head, *b_tail;
int bh_len, bt_len;
struct beacon_data *beacon;
rcu_read_lock();
sdata = vif_to_sdata(vif);
bdev = sdata->dev;
ap = &sdata->u.ap;
if (!ap || sdata->vif.type != IEEE80211_IF_TYPE_AP ||
!ap->beacon_head) {
beacon = rcu_dereference(ap->beacon);
if (!ap || sdata->vif.type != IEEE80211_IF_TYPE_AP || !beacon) {
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
if (net_ratelimit())
printk(KERN_DEBUG "no beacon data avail for %s\n",
bdev->name);
#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
return NULL;
skb = NULL;
goto out;
}
/* Assume we are generating the normal beacon locally */
b_head = ap->beacon_head;
b_tail = ap->beacon_tail;
bh_len = ap->beacon_head_len;
bt_len = ap->beacon_tail_len;
skb = dev_alloc_skb(local->tx_headroom +
bh_len + bt_len + 256 /* maximum TIM len */);
/* headroom, head length, tail length and maximum TIM length */
skb = dev_alloc_skb(local->tx_headroom + beacon->head_len +
beacon->tail_len + 256);
if (!skb)
return NULL;
goto out;
skb_reserve(skb, local->tx_headroom);
memcpy(skb_put(skb, bh_len), b_head, bh_len);
memcpy(skb_put(skb, beacon->head_len), beacon->head,
beacon->head_len);
ieee80211_include_sequence(sdata, (struct ieee80211_hdr *)skb->data);
ieee80211_beacon_add_tim(local, ap, skb);
ieee80211_beacon_add_tim(local, ap, skb, beacon);
if (b_tail) {
memcpy(skb_put(skb, bt_len), b_tail, bt_len);
}
if (beacon->tail)
memcpy(skb_put(skb, beacon->tail_len), beacon->tail,
beacon->tail_len);
if (control) {
rate_control_get_rate(local->mdev, local->oper_hw_mode, skb,
......@@ -1749,7 +1749,8 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
wiphy_name(local->hw.wiphy));
}
dev_kfree_skb(skb);
return NULL;
skb = NULL;
goto out;
}
control->tx_rate =
......@@ -1764,6 +1765,9 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
}
ap->num_beacons++;
out:
rcu_read_unlock();
return skb;
}
EXPORT_SYMBOL(ieee80211_beacon_get);
......@@ -1815,13 +1819,24 @@ ieee80211_get_buffered_bc(struct ieee80211_hw *hw,
struct net_device *bdev;
struct ieee80211_sub_if_data *sdata;
struct ieee80211_if_ap *bss = NULL;
struct beacon_data *beacon;
sdata = vif_to_sdata(vif);
bdev = sdata->dev;
if (!bss || sdata->vif.type != IEEE80211_IF_TYPE_AP ||
!bss->beacon_head)
if (!bss)
return NULL;
rcu_read_lock();
beacon = rcu_dereference(bss->beacon);
if (sdata->vif.type != IEEE80211_IF_TYPE_AP || !beacon ||
!beacon->head) {
rcu_read_unlock();
return NULL;
}
rcu_read_unlock();
if (bss->dtim_count != 0)
return NULL; /* send buffered bc/mc only after DTIM beacon */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册