- 21 1月, 2011 1 次提交
-
-
由 David Rientjes 提交于
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: NIngo Molnar <mingo@elte.hu> Acked-by: NDavid Woodhouse <david.woodhouse@intel.com> Signed-off-by: NDavid Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 12月, 2010 1 次提交
-
-
由 Janusz Krzysztofik 提交于
This patches removes a config option that was used to select a FIQ handler to be build for Amstrad Delta, as required by the on-board serio interface driver. Not having any problem reports received since it was introduced in 2.6.35, the FIQ handler can now be built and initialized by default, thus reqiring no extra config option. Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 03 11月, 2010 1 次提交
-
-
由 Michael Witten 提交于
Signed-off-by: NMichael Witten <mfwitten@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 19 10月, 2010 1 次提交
-
-
由 Dmitry Eremin-Solenikov 提交于
PS2Mult is a simple serial protocol used for multiplexing several PS/2 streams into one serial data stream. It's used e.g. on TQM85xx series of boards. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 08 7月, 2010 1 次提交
-
-
由 Feng Tang 提交于
This reverts commit 0b28bac5. After adding x86_platform's detection for i8042 controller, we don't need the force dependency on !X86_MRST any more Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NFeng Tang <feng.tang@intel.com> LKML-Reference: <1278342202-10973-5-git-send-email-feng.tang@intel.com> Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 23 6月, 2010 1 次提交
-
-
由 Randy Dunlap 提交于
Some of the recent X86_MRST additions make some "select"s conditional on X86_MRST but missed some related kconfig symbols, causing: drivers/built-in.o: In function `ps2_end_command': (.text+0x257ab2): undefined reference to `i8042_check_port_owner' drivers/built-in.o: In function `ps2_end_command': (.text+0x257ae1): undefined reference to `i8042_unlock_chip' drivers/built-in.o: In function `ps2_begin_command': (.text+0x257b40): undefined reference to `i8042_check_port_owner' drivers/built-in.o: In function `ps2_begin_command': (.text+0x257b6f): undefined reference to `i8042_lock_chip' when SERIO_I8042=m, SERIO_LIBPS2=y, KEYBOARD_ATKBD=y. We need to make i8042 dependant upon !X86_MRST and allow deselecting atkbd on Moorestown even when !CONFIG_EMBEDDED. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 25 5月, 2010 1 次提交
-
-
由 Paul Mundt 提交于
The sh64 cayman platform is the only sh board that ships with an i8042, so we just hide it for all of the others. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 06 5月, 2010 1 次提交
-
-
由 Janusz Krzysztofik 提交于
The patch introduces a serio driver that supports a keyboard serial port found on the Amstrad Delta videophone board. After initializing the hardware, the driver reads its input data from a buffer filled in by the board FIQ (Fast Interrupt Request) handler. Standard AT keyboard driver (atkbd) will be used on top of the serio layer for handling the E3 keyboard (called mailboard) connected to the port. Since the device generated scancodes differ from what the atkbd expects, a custom key code to scan code table must be loaded from userspace for the keyboard to be useable. Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 13 10月, 2009 1 次提交
-
-
由 Thomas Chou 提交于
This patch adds a new SERIO driver to support the Altera University Program PS/2 controller. [dtor@mail.ru: assorted cleanups] Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 06 10月, 2009 1 次提交
-
-
由 Dmitry Torokhov 提交于
libps2 can not be built in if i8042 is a module, all other combinations are allowed. Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 21 5月, 2009 1 次提交
-
-
由 Michal Simek 提交于
Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
- 27 11月, 2008 1 次提交
-
-
由 Russell King 提交于
The CLPS7500 platform has not built since 2.6.22-git7 and there seems to be no interest in fixing it. So, remove the platform support. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 08 7月, 2008 1 次提交
-
-
由 John Linn 提交于
Added a new driver for Xilinx XPS PS2 IP. This driver is a flat driver to better match the Linux driver pattern. Signed-off-by: NSadanand <sadanan@xilinx.com> Signed-off-by: NJohn Linn <john.linn@xilinx.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 15 4月, 2008 1 次提交
-
-
由 Hans-Christian Egtvedt 提交于
Add support for the PSIF peripheral on AVR32 AP7 devices. It is implemented as a serio driver and will behave like a serio 8042 device. The driver has been tested with a Dell keyboard capable of running on 3.3 volts and a Logitech mouse on the STK1000 + STK1002 starter kit. The Logitech mouse was hacked by cutting the cord and using a bi-directional voltage converter to get the required 5 volt I/O level. For more information about the PSIF module, see the datasheet for AT32AP700X at http://www.atmel.com/dyn/products/datasheets.asp?family_id=682Signed-off-by: NHans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 23 11月, 2007 1 次提交
-
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <michael.frysinger@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
- 24 7月, 2007 1 次提交
-
-
由 Michael Hennerich 提交于
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
- 10 10月, 2006 1 次提交
-
-
由 Geert Uytterhoeven 提交于
Enable HIL configuration options on HP300 Signed-off-by: NKars de Jong <jongk@linux-m68k.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 04 10月, 2006 1 次提交
-
-
由 Matt LaPlante 提交于
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 11 7月, 2005 1 次提交
-
-
由 Neil Brown 提交于
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-