The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.
Reviewed-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NDavid Woodhouse <david.woodhouse@intel.com>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Emulate single-touch compatible events for the 2-finger panels
so that they can be used with single-touch legacy clients.

Assign device ids as Wacom USB vendor ID and product ID.
Name the device to reflect its specific features.

Scale touch coordinates to pen maximum if pen supported.
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This is driver for EasyPoint AS5011 2 axis joystick chip. This chip is
plugged on an I2C bus.

Tested on ARM processor (i.MX27).
Signed-off-by: NFabien Marteau <fabien.marteau@armadeus.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The only platform using this driver (mach-aaec2000) is no longer in
the kernel so remove the driver.
Signed-off-by: NJamie Iles <jamie@jamieiles.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

i8042 controller present in Dell Vostro V13 errorneously signals spurious
timeouts.

Introduce i8042.notimeout parameter for ignoring i8042-signalled timeouts
and apply this quirk automatically for Dell Vostro V13, based on DMI match.

In addition to that, this machine also needs to be added to nomux blacklist.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There was a semi-colon missing and it broke the compile.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a general move towards the use of dev_pm_ops rather than
bus specific suspend APIs as this simplifies both the bus and PM core
implementations. Convert the cy8ctmg110_ts driver over.

Compile tested only.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There is a general move towards the use of dev_pm_ops rather than
bus specific suspend APIs as this simplifies both the bus and PM core
implementations. Convert the migor_ts driver over.

Compile tested only.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There is a general move towards the use of dev_pm_ops rather than
bus specific suspend APIs as this simplifies both the bus and PM core
implementations. Convert the mcs5000_ts driver over.

Compile tested only.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There is a general move towards the use of dev_pm_ops rather than
bus specific suspend APIs as this simplifies both the bus and PM core
implementations. Convert the eeti_ts driver over.

Compile tested only by me, but Sven Neumann reports that the new code
works.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: NSven Neumann <s.neumann@raumfeld.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There is a general move towards the use of dev_pm_ops rather than
bus specific suspend APIs as this simplifies both the bus and PM core
implementations. Convert the ad7879-ts I2C support over.

Compile tested only.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NChristoph Lameter <cl@linux.com>
Acked-by: N"H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Not all penabled devices support touch. The same holds true for touch
devices, so we should be setting up devices according to the results
returned when we query the hardware.
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Add support for the keypad controller module found on the
TC3589X devices. This driver default adds the support for
TC35893 device.
Signed-off-by: NSundar Iyer <sundar.iyer@stericsson.com>
Acked-by: NDmitry Torokhov <dtor@mail.ru>
[Some minor fixups for compilation]
Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com>

Move winbond-cir from drivers/input/misc/ into drivers/media/rc/
and convert it to use rc-core.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This makes code safer and easier to read.
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Acked-by: NLinus Walleij <linus.walleij@stericsson.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This patch adds notebook Acer Aspire 5100 to the list of Dritek HW. Acer
Aspire 5100 needs Dritek keyboard extension to support all Fn keys.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Tested-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NAjay Ramaswamy <ajay@ramaswamy.net>
Reviewed-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

OLPC has switched to a Synaptics touchpad.  It turns out that it's
pretty useless in absolute mode.  This patch looks for an OLPC
system (via DMI tables), and refuses to init Synaptics mode in
that scenario (falling back to relative mode).
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Minor comment fixup for typos and grammar. Noticed while adding a
separate workaround.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Most keypad drivers make use of the <linux/input/matrix_keypad.h>
defined macros, structures and inline functions.

Convert omap-keypad driver to use those as well, as suggested by a
compile time warning, hardcoded into the OMAP <palt/keypad.h>.

Created against linux-2.6.37-rc5.
Tested on Amstrad Delta.
Compile tested with omap1_defconfig and omap2plus_defconfig shrinked to
board-h4.
Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Reviewed-by: NAaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NTony Lindgren <tony@atomide.com>

In multitouch mode, at least one device (fw: 7.4 id: 0x1c0b1) sometimes
sends a final main packet with x == 1. Since the normal values are above
1472, this is clearly bogus. At the same time, a two-finger touch is
signaled, even though only one finger was on the pad to begin with. This
patch ignores the packet altogether, removing the problem.
Acked-by: NChris Bagwell <chris@cnpbagwell.com>
Acked-by: NChase Douglas <chase.douglas@canonical.com>
Acked-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

The Synaptics 2.7 series of touchpads support a mode for reporting two
sets of X/Y/Pressure data (advanced gesture mode). By default, these
devices report only single finger data, depriving userspace of the
nowadays ubiquitous two-finger scroll gesture.

Enabling advanced gesture mode also enables the multi-finger report,
although the device does not claim that capability. Up to three
fingers can be reported this way.

While two or three fingers are touching, the normal packet is
prepended by a reduced finger packet of lower resolution. From the two
packets (which do not represent the actual fingers), the bounding
rectangle of the individual contacts can be extracted.  This
information is sufficient to perform scaling gestures and a limited
form of rotation gesture. The behavior has been coined semi-mt
capability, and is signaled to userspace via the INPUT_PROP_SEMI_MT
device property.

Work to decode the advanced gesture packet: Takashi Iwai.
Cleanup and testing of the original patch: Chase Douglas.
Minor cleanup and testing: Chris Bagwell.
Finalization and semi-mt support: Henrik Rydberg.

Reported-by: Tobyn Bertram
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NChase Douglas <chase.douglas@canonical.com>
Signed-off-by: NChris Bagwell <chris@cnpbagwell.com>
Acked-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

With the new input property interface, it is possible to report the
special quirks of a device using ioctl/sysfs. This patch sets up the
device as a pointer, and reports the clickpad functionality via the
INPUT_PROP_BUTTONPAD property.
Acked-by: NChase Douglas <chase.douglas@canonical.com>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

Looking at the uevent stream for input devices, all properties are on
the form "A=B" except the bitmap values, which are on the form
"A==B". This bug has been around at least since 2007, and the input
uevent code has been untouched since. The recent addition of device
properties suggests this is a good time for a remedy.
Acked-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

Today, userspace sets up an input device based on the data it emits.
This is not always enough; a tablet and a touchscreen may emit exactly
the same data, for instance, but the former should be set up with a
pointer whereas the latter does not need to. Recently, a new type of
touchpad has emerged where the buttons are under the pad, which
changes logic without changing the emitted data. This patch introduces
a new ioctl, EVIOCGPROP, which enables user access to a set of device
properties useful during setup. The properties are given as a bitmap
in the same fashion as the event types, and are also made available
via sysfs, uevent and /proc/bus/input/devices.
Acked-by: NPing Cheng <pingc@wacom.com>
Acked-by: NChase Douglas <chase.douglas@canonical.com>
Acked-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

The drivers using the type B protocol all report tracking information
the same way. The contact id is semantically equivalent to
ABS_MT_SLOT, and the handling of ABS_MT_TRACKING_ID only complicates
the driver. The situation can be improved upon by providing a common
pointer emulation code, thereby removing the need for the tracking id
in the driver.  This patch moves all tracking event handling over to
the input core, simplifying both the existing drivers and the ones
currently in preparation.
Acked-by: NPing Cheng <pingc@wacom.com>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

The MT slots devices all follow the same initialization pattern
of creating slots and hinting about buffer size. Let drivers call
an initialization function instead, and make sure it can be called
repeatedly without side effects.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

In preparation for common code to handle a larger set of MT slots
devices, move the slots handling over to a separate file.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

This patch introduces support for Sitronix ST1232 integrated capacitive
touchscreen with LCD module. The touchscreen is multitouch capable and
can report coordinates of up to two contact points.
Signed-off-by: NTony SIM <chinyeow.sim.xt@renesas.com>
Reviewed-by: NTrilok Soni <tsoni@codeaurora.org>
Acked-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The desire to keep old names for the EVIOCGKEYCODE/EVIOCSKEYCODE while
extending them to support large scancodes was a mistake. While we tried
to keep ABI intact (and we succeeded in doing that, programs compiled
on older kernels will work on newer ones) there is still a problem with
recompiling existing software with newer kernel headers.

New kernel headers will supply updated ioctl numbers and kernel will
expect that userspace will use struct input_keymap_entry to set and
retrieve keymap data. But since the names of ioctls are still the same
userspace will happily compile even if not adjusted to make use of the
new structure and will start miraculously fail in the field.

To avoid this issue let's revert EVIOCGKEYCODE/EVIOCSKEYCODE definitions
and add EVIOCGKEYCODE_V2/EVIOCSKEYCODE_V2 so that userspace can explicitly
select the style of ioctls it wants to employ.
Reviewed-by: NHenrik Rydberg <rydberg@euromail.se>
Acked-by: NJarod Wilson <jarod@redhat.com>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Add the features struct and device table entry to enable yet another
version of Wacom Bamboo Pen (CTL460, Product ID 0xD4).
Signed-off-by: NKevin Granade <kevin.granade@gmail.com>
Acked-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This should allow loading this module automatically on systems that
have such device.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Support 8-bit tca6408a I/O expander as a keypad.
Signed-off-by: NTony SIM <chinyeow.sim.xt@renesas.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Adds new Bamboo Pen & Touch model - Bamboo P & T Special Edition
Medium (CTH661/L; Product ID = 0xdb).
Tested-by: NTobias Verbeke <tobias.verbeke@gmail.com>
Signed-off-by: NDavid Foley <favux.is@gmail.com>
Acked-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The existing gpio-keys driver can be usable only for GPIO lines with
interrupt support. Several devices have buttons connected to a GPIO
line which is not capable to generate interrupts. This patch adds a
new input driver using the generic GPIO layer and the input-polldev
to support such buttons.

[Ben Gardiner <bengardiner@nanometrics.ca: fold code to use more
 of the original gpio_keys infrastructure; cleanups and other
 improvements.]
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Signed-off-by: NBen Gardiner <bengardiner@nanometrics.ca>
Tested-by: NBen Gardiner <bengardiner@nanometrics.ca>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Fix kernel warnings caused by the driver name of GSC PS/2 containing '/'.

The following warnings are observed on a K410 system :

[   10.700000] name 'GSC PS/2 keyboard'
[   10.732000] ------------[ cut here ]------------
[   10.772000] WARNING: at fs/proc/generic.c:323
[   10.828000] Modules linked in:
[   10.916000]
[   10.916000]      YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
[   10.936000] PSW: 00000000000001000000000000001111 Not tainted
[   10.992000] r00-03  0004000f 104fe3e0 10201ea0 00000000
[   11.060000] r04-07  4fc405c8 00000006 4fc405c8 4fc40694
[   11.124000] r08-11  4fc40708 10438aa0 00000001 1043bfc8
[   11.184000] r12-15  104ff2a0 104ff2a0 4fc38634 104ff2a0
[   11.248000] r16-19  f0001570 10479af0 f000006c 1044fe50
[   11.308000] r20-23  00000000 00000028 104cd858 00000000
[   11.372000] r24-27  ffffffff 0000000e 1044fe10 1043bbe0
[   11.436000] r28-31  0000002b 00000078 4fc40800 0000000d
[   11.496000] sr00-03  00000000 00000000 00000000 00000000
[   11.560000] sr04-07  00000000 00000000 00000000 00000000
[   11.624000]
[   11.688000] IASQ: 00000000 00000000 IAOQ: 10201ea0 10201ea4
[   11.704000]  IIR: 03ffe01f    ISR: 00000000  IOR: 0000000d
[   11.772000]  CPU:        0   CR30: 4fc40000 CR31: f01043b0
[   11.836000]  ORIG_R28: 4fc40940
[   11.904000]  IAOQ[0]: __xlate_proc_name+0x90/0xd0
[   11.940000]  IAOQ[1]: __xlate_proc_name+0x94/0xd0
[   11.996000]  RP(r2): __xlate_proc_name+0x90/0xd0
[   12.052000] Backtrace:
[   12.108000]  [<10257790>] vsnprintf+0x290/0x4f4
[   12.136000]
[   12.188000] ---[ end trace 91bf6ece17e322dd ]---
[   12.208000] serio: GSC PS/2 keyboard port at 0x0001c000 irq 19 @ 10:12:7
[   12.264000] name 'GSC PS/2 mouse'
[   12.344000] ------------[ cut here ]------------
[   12.384000] WARNING: at fs/proc/generic.c:323
[   12.436000] Modules linked in:
[   12.524000]
[   12.528000]      YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
[   12.544000] PSW: 00000000000001000000000000001111 Tainted: G        W
[   12.600000] r00-03  0004000f 104fe3e0 10201ea0 00000000
[   12.680000] r04-07  4fc405c8 00000006 4fc405c8 4fc40694
[   12.740000] r08-11  4fc40708 10438aa0 00000001 1043bfc8
[   12.804000] r12-15  104ff2a0 104ff2a0 4fc38634 104ff2a0
[   12.868000] r16-19  f0001570 10479af0 f000006c 1044fe50
[   12.928000] r20-23  00000000 00000025 104cd858 00000000
[   12.992000] r24-27  ffffffff 0000000e 1044fe10 1043bbe0
[   13.056000] r28-31  00000028 00000078 4fc40800 0000000d
[   13.116000] sr00-03  00000000 00000000 00000000 00000000
[   13.180000] sr04-07  00000000 00000000 00000000 00000000
[   13.244000]
[   13.308000] IASQ: 00000000 00000000 IAOQ: 10201ea0 10201ea4
[   13.324000]  IIR: 03ffe01f    ISR: 00000000  IOR: 0000000d
[   13.392000]  CPU:        0   CR30: 4fc40000 CR31: f01043b0
[   13.456000]  ORIG_R28: 4fc40940
[   13.524000]  IAOQ[0]: __xlate_proc_name+0x90/0xd0
[   13.560000]  IAOQ[1]: __xlate_proc_name+0x94/0xd0
[   13.616000]  RP(r2): __xlate_proc_name+0x90/0xd0
[   13.672000] Backtrace:
[   13.728000]  [<10257790>] vsnprintf+0x290/0x4f4
[   13.756000]
[   13.808000] ---[ end trace 91bf6ece17e322de ]---
[   13.828000] serio: GSC PS/2 mouse port at 0x00020100 irq 19 @ 10:12:8
Signed-off-by: NGuy Martin <gmsoft@tuxicoman.be>
Acked-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

The ref-count of parport gained from parport_find_number()
was not released in normal path.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Lenovo S10-3t's ClickPad is a 2-button ClickPad that reports BTN_LEFT
and BTN_RIGHT as normal touchpad, unlike the 1-button ClickPad used in
HP mini 210 that reports solely BTN_MIDDLE.

In 0xc0-cap response, the 1-button ClickPad has the 20-bit set while
2-button ClickPad has the 8-bit set.

This patch makes the kernel only handle 1-button ClickPad specially,
and treat 2-button ClickPad in the same fashion as regular touchpads.

This fixes kernel bug #18122 and MeeGo bug #4807.
Signed-off-by: NYan Li <yan.i.li@intel.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>