Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 170
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 13 2月, 2019 11 次提交
    • S
      f2fs: fix use-after-free issue when accessing sbi->stat_info · 69e7f877
      由 Sahitya Tummala 提交于 
      [ Upstream commit 60aa4d5536ab7fe32433ca1173bd9d6633851f27 ]

iput() on sbi->node_inode can update sbi->stat_info
in the below context, if the f2fs_write_checkpoint()
has failed with error.

f2fs_balance_fs_bg+0x1ac/0x1ec
f2fs_write_node_pages+0x4c/0x260
do_writepages+0x80/0xbc
__writeback_single_inode+0xdc/0x4ac
writeback_single_inode+0x9c/0x144
write_inode_now+0xc4/0xec
iput+0x194/0x22c
f2fs_put_super+0x11c/0x1e8
generic_shutdown_super+0x70/0xf4
kill_block_super+0x2c/0x5c
kill_f2fs_super+0x44/0x50
deactivate_locked_super+0x60/0x8c
deactivate_super+0x68/0x74
cleanup_mnt+0x40/0x78

Fix this by moving f2fs_destroy_stats() further below iput() in
both f2fs_put_super() and f2fs_fill_super() paths.
Signed-off-by: NSahitya Tummala <stummala@codeaurora.org>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      69e7f877
    • R
      cifs: check ntwrk_buf_start for NULL before dereferencing it · 5d3b4cd8
      由 Ronnie Sahlberg 提交于 
      [ Upstream commit 59a63e479ce36a3f24444c3a36efe82b78e4a8e0 ]

RHBZ: 1021460

There is an issue where when multiple threads open/close the same directory
ntwrk_buf_start might end up being NULL, causing the call to smbCalcSize
later to oops with a NULL deref.

The real bug is why this happens and why this can become NULL for an
open cfile, which should not be allowed.
This patch tries to avoid a oops until the time when we fix the underlying
issue.
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      5d3b4cd8
    • C
      NFS: nfs_compare_mount_options always compare auth flavors. · 8c642d71
      由 Chris Perl 提交于 
      [ Upstream commit 594d1644cd59447f4fceb592448d5cd09eb09b5e ]

This patch removes the check from nfs_compare_mount_options to see if a
`sec' option was passed for the current mount before comparing auth
flavors and instead just always compares auth flavors.

Consider the following scenario:

You have a server with the address 192.168.1.1 and two exports /export/a
and /export/b.  The first export supports `sys' and `krb5' security, the
second just `sys'.

Assume you start with no mounts from the server.

The following results in EIOs being returned as the kernel nfs client
incorrectly thinks it can share the underlying `struct nfs_server's:

$ mkdir /tmp/{a,b}
$ sudo mount -t nfs -o vers=3,sec=krb5 192.168.1.1:/export/a /tmp/a
$ sudo mount -t nfs -o vers=3          192.168.1.1:/export/b /tmp/b
$ df >/dev/null
df: ‘/tmp/b’: Input/output error
Signed-off-by: NChris Perl <cperl@janestreet.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      8c642d71
    • E
      btrfs: use tagged writepage to mitigate livelock of snapshot · f5d5b543
      由 Ethan Lien 提交于 
      [ Upstream commit 3cd24c698004d2f7668e0eb9fc1f096f533c791b ]

Snapshot is expected to be fast. But if there are writers steadily
creating dirty pages in our subvolume, the snapshot may take a very long
time to complete. To fix the problem, we use tagged writepage for
snapshot flusher as we do in the generic write_cache_pages(), so we can
omit pages dirtied after the snapshot command.

This does not change the semantics regarding which data get to the
snapshot, if there are pages being dirtied during the snapshotting
operation.  There's a sync called before snapshot is taken in old/new
case, any IO in flight just after that may be in the snapshot but this
depends on other system effects that might still sync the IO.

We do a simple snapshot speed test on a Intel D-1531 box:

fio --ioengine=libaio --iodepth=32 --bs=4k --rw=write --size=64G
--direct=0 --thread=1 --numjobs=1 --time_based --runtime=120
--filename=/mnt/sub/testfile --name=job1 --group_reporting & sleep 5;
time btrfs sub snap -r /mnt/sub /mnt/snap; killall fio

original: 1m58sec
patched:  6.54sec

This is the best case for this patch since for a sequential write case,
we omit nearly all pages dirtied after the snapshot command.

For a multi writers, random write test:

fio --ioengine=libaio --iodepth=32 --bs=4k --rw=randwrite --size=64G
--direct=0 --thread=1 --numjobs=4 --time_based --runtime=120
--filename=/mnt/sub/testfile --name=job1 --group_reporting & sleep 5;
time btrfs sub snap -r /mnt/sub /mnt/snap; killall fio

original: 15.83sec
patched:  10.35sec

The improvement is smaller compared to the sequential write case,
since we omit only half of the pages dirtied after snapshot command.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NEthan Lien <ethanlien@synology.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      f5d5b543
    • A
      btrfs: harden agaist duplicate fsid on scanned devices · 3733632e
      由 Anand Jain 提交于 
      [ Upstream commit a9261d4125c97ce8624e9941b75dee1b43ad5df9 ]

It's not that impossible to imagine that a device OR a btrfs image is
copied just by using the dd or the cp command. Which in case both the
copies of the btrfs will have the same fsid. If on the system with
automount enabled, the copied FS gets scanned.

We have a known bug in btrfs, that we let the device path be changed
after the device has been mounted. So using this loop hole the new
copied device would appears as if its mounted immediately after it's
been copied.

For example:

Initially.. /dev/mmcblk0p4 is mounted as /

  $ lsblk
  NAME        MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
  mmcblk0     179:0    0 29.2G  0 disk
  |-mmcblk0p4 179:4    0    4G  0 part /
  |-mmcblk0p2 179:2    0  500M  0 part /boot
  |-mmcblk0p3 179:3    0  256M  0 part [SWAP]
  `-mmcblk0p1 179:1    0  256M  0 part /boot/efi

  $ btrfs fi show
     Label: none  uuid: 07892354-ddaa-4443-90ea-f76a06accaba
     Total devices 1 FS bytes used 1.40GiB
     devid    1 size 4.00GiB used 3.00GiB path /dev/mmcblk0p4

Copy mmcblk0 to sda

  $ dd if=/dev/mmcblk0 of=/dev/sda

And immediately after the copy completes the change in the device
superblock is notified which the automount scans using btrfs device scan
and the new device sda becomes the mounted root device.

  $ lsblk
  NAME        MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
  sda           8:0    1 14.9G  0 disk
  |-sda4        8:4    1    4G  0 part /
  |-sda2        8:2    1  500M  0 part
  |-sda3        8:3    1  256M  0 part
  `-sda1        8:1    1  256M  0 part
  mmcblk0     179:0    0 29.2G  0 disk
  |-mmcblk0p4 179:4    0    4G  0 part
  |-mmcblk0p2 179:2    0  500M  0 part /boot
  |-mmcblk0p3 179:3    0  256M  0 part [SWAP]
  `-mmcblk0p1 179:1    0  256M  0 part /boot/efi

  $ btrfs fi show /
    Label: none  uuid: 07892354-ddaa-4443-90ea-f76a06accaba
    Total devices 1 FS bytes used 1.40GiB
    devid    1 size 4.00GiB used 3.00GiB path /dev/sda4

The bug is quite nasty that you can't either unmount /dev/sda4 or
/dev/mmcblk0p4. And the problem does not get solved until you take sda
out of the system on to another system to change its fsid using the
'btrfstune -u' command.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      3733632e
    • J
      udf: Fix BUG on corrupted inode · 6a1d712b
      由 Jan Kara 提交于 
      [ Upstream commit d288d95842f1503414b7eebce3773bac3390457e ]

When inode is corrupted so that extent type is invalid, some functions
(such as udf_truncate_extents()) will just BUG. Check that extent type
is valid when loading the inode to memory.
Reported-by: NAnatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      6a1d712b
    • J
      nfsd4: fix crash on writing v4_end_grace before nfsd startup · 2f0fb76b
      由 J. Bruce Fields 提交于 
      [ Upstream commit 62a063b8e7d1db684db3f207261a466fa3194e72 ]

Anatoly Trosinenko reports that this:

1) Checkout fresh master Linux branch (tested with commit e195ca6cb)
2) Copy x84_64-config-4.14 to .config, then enable NFS server v4 and build
3) From `kvm-xfstests shell`:

results in NULL dereference in locks_end_grace.

Check that nfsd has been started before trying to end the grace period.
Reported-by: NAnatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      2f0fb76b
    • T
      f2fs: fix wrong return value of f2fs_acl_create · d54d612a
      由 Tiezhu Yang 提交于 
      [ Upstream commit f6176473a0c7472380eef72ebeb330cf9485bf0a ]

When call f2fs_acl_create_masq() failed, the caller f2fs_acl_create()
should return -EIO instead of -ENOMEM, this patch makes it consistent
with posix_acl_create() which has been fixed in commit beaf226b
("posix_acl: don't ignore return value of posix_acl_create_masq()").

Fixes: 83dfe53c ("f2fs: fix reference leaks in f2fs_acl_create")
Signed-off-by: NTiezhu Yang <kernelpatch@126.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      d54d612a
    • S
      f2fs: fix race between write_checkpoint and write_begin · ddab3d0a
      由 Sheng Yong 提交于 
      [ Upstream commit 2866fb16d67992195b0526d19e65acb6640fb87f ]

The following race could lead to inconsistent SIT bitmap:

Task A                          Task B
======                          ======
f2fs_write_checkpoint
  block_operations
    f2fs_lock_all
      down_write(node_change)
      down_write(node_write)
      ... sync ...
      up_write(node_change)
                                f2fs_file_write_iter
                                  set_inode_flag(FI_NO_PREALLOC)
                                  ......
                                  f2fs_write_begin(index=0, has inline data)
                                    prepare_write_begin
                                      __do_map_lock(AIO) => down_read(node_change)
                                      f2fs_convert_inline_page => update SIT
                                      __do_map_lock(AIO) => up_read(node_change)
  f2fs_flush_sit_entries <= inconsistent SIT
  finish write checkpoint
  sudden-power-off

If SPO occurs after checkpoint is finished, SIT bitmap will be set
incorrectly.
Signed-off-by: NSheng Yong <shengyong1@huawei.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      ddab3d0a
    • Y
      f2fs: move dir data flush to write checkpoint process · c96d2b9d
      由 Yunlei He 提交于 
      [ Upstream commit b61ac5b720146c619c7cdf17eff2551b934399e5 ]

This patch move dir data flush to write checkpoint process, by
doing this, it may reduce some time for dir fsync.

pre:
	-f2fs_do_sync_file enter
		-file_write_and_wait_range  <- flush & wait
		-write_checkpoint
			-do_checkpoint	    <- wait all
	-f2fs_do_sync_file exit

now:
	-f2fs_do_sync_file enter
		-write_checkpoint
			-block_operations   <- flush dir & no wait
			-do_checkpoint	    <- wait all
	-f2fs_do_sync_file exit
Signed-off-by: NYunlei He <heyunlei@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      c96d2b9d
    • B
      dlm: Don't swamp the CPU with callbacks queued during recovery · ee9268a9
      由 Bob Peterson 提交于 
      [ Upstream commit 216f0efd19b9cc32207934fd1b87a45f2c4c593e ]

Before this patch, recovery would cause all callbacks to be delayed,
put on a queue, and afterward they were all queued to the callback
work queue. This patch does the same thing, but occasionally takes
a break after 25 of them so it won't swamp the CPU at the expense
of other RT processes like corosync.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      ee9268a9
  3. 07 2月, 2019 9 次提交
  5. 31 1月, 2019 7 次提交
  7. 26 1月, 2019 10 次提交
    • P
      userfaultfd: clear flag if remap event not enabled · 2011eb74
      由 Peter Xu 提交于 
      [ Upstream commit 3cfd22be0ad663248fadfc8f6ffa3e255c394552 ]

When the process being tracked does mremap() without
UFFD_FEATURE_EVENT_REMAP on the corresponding tracking uffd file handle,
we should not generate the remap event, and at the same time we should
clear all the uffd flags on the new VMA.  Without this patch, we can still
have the VM_UFFD_MISSING|VM_UFFD_WP flags on the new VMA even the fault
handling process does not even know the existance of the VMA.

Link: http://lkml.kernel.org/r/20181211053409.20317-1-peterx@redhat.comSigned-off-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NAndrea Arcangeli <aarcange@redhat.com>
Acked-by: NMike Rapoport <rppt@linux.vnet.ibm.com>
Reviewed-by: NWilliam Kucharski <william.kucharski@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Hugh Dickins <hughd@google.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Pravin Shedge <pravin.shedge4linux@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      2011eb74
    • J
      ocfs2: fix panic due to unrecovered local alloc · 5a404f39
      由 Junxiao Bi 提交于 
      [ Upstream commit 532e1e54c8140188e192348c790317921cb2dc1c ]

mount.ocfs2 ignore the inconsistent error that journal is clean but
local alloc is unrecovered.  After mount, local alloc not empty, then
reserver cluster didn't alloc a new local alloc window, reserveration
map is empty(ocfs2_reservation_map.m_bitmap_len = 0), that triggered the
following panic.

This issue was reported at

  https://oss.oracle.com/pipermail/ocfs2-devel/2015-May/010854.html

and was advised to fixed during mount.  But this is a very unusual
inconsistent state, usually journal dirty flag should be cleared at the
last stage of umount until every other things go right.  We may need do
further debug to check that.  Any way to avoid possible futher
corruption, mount should be abort and fsck should be run.

  (mount.ocfs2,1765,1):ocfs2_load_local_alloc:353 ERROR: Local alloc hasn't been recovered!
  found = 6518, set = 6518, taken = 8192, off = 15912372
  ocfs2: Mounting device (202,64) on (node 0, slot 3) with ordered data mode.
  o2dlm: Joining domain 89CEAC63CC4F4D03AC185B44E0EE0F3F ( 0 1 2 3 4 5 6 8 ) 8 nodes
  ocfs2: Mounting device (202,80) on (node 0, slot 3) with ordered data mode.
  o2hb: Region 89CEAC63CC4F4D03AC185B44E0EE0F3F (xvdf) is now a quorum device
  o2net: Accepted connection from node yvwsoa17p (num 7) at 172.22.77.88:7777
  o2dlm: Node 7 joins domain 64FE421C8C984E6D96ED12C55FEE2435 ( 0 1 2 3 4 5 6 7 8 ) 9 nodes
  o2dlm: Node 7 joins domain 89CEAC63CC4F4D03AC185B44E0EE0F3F ( 0 1 2 3 4 5 6 7 8 ) 9 nodes
  ------------[ cut here ]------------
  kernel BUG at fs/ocfs2/reservations.c:507!
  invalid opcode: 0000 [#1] SMP
  Modules linked in: ocfs2 rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs fscache lockd grace ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sunrpc ipt_REJECT nf_reject_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 ovmapi ppdev parport_pc parport xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea acpi_cpufreq pcspkr i2c_piix4 i2c_core sg ext4 jbd2 mbcache2 sr_mod cdrom xen_blkfront pata_acpi ata_generic ata_piix floppy dm_mirror dm_region_hash dm_log dm_mod
  CPU: 0 PID: 4349 Comm: startWebLogic.s Not tainted 4.1.12-124.19.2.el6uek.x86_64 #2
  Hardware name: Xen HVM domU, BIOS 4.4.4OVM 09/06/2018
  task: ffff8803fb04e200 ti: ffff8800ea4d8000 task.ti: ffff8800ea4d8000
  RIP: 0010:[<ffffffffa05e96a8>]  [<ffffffffa05e96a8>] __ocfs2_resv_find_window+0x498/0x760 [ocfs2]
  Call Trace:
    ocfs2_resmap_resv_bits+0x10d/0x400 [ocfs2]
    ocfs2_claim_local_alloc_bits+0xd0/0x640 [ocfs2]
    __ocfs2_claim_clusters+0x178/0x360 [ocfs2]
    ocfs2_claim_clusters+0x1f/0x30 [ocfs2]
    ocfs2_convert_inline_data_to_extents+0x634/0xa60 [ocfs2]
    ocfs2_write_begin_nolock+0x1c6/0x1da0 [ocfs2]
    ocfs2_write_begin+0x13e/0x230 [ocfs2]
    generic_perform_write+0xbf/0x1c0
    __generic_file_write_iter+0x19c/0x1d0
    ocfs2_file_write_iter+0x589/0x1360 [ocfs2]
    __vfs_write+0xb8/0x110
    vfs_write+0xa9/0x1b0
    SyS_write+0x46/0xb0
    system_call_fastpath+0x18/0xd7
  Code: ff ff 8b 75 b8 39 75 b0 8b 45 c8 89 45 98 0f 84 e5 fe ff ff 45 8b 74 24 18 41 8b 54 24 1c e9 56 fc ff ff 85 c0 0f 85 48 ff ff ff <0f> 0b 48 8b 05 cf c3 de ff 48 ba 00 00 00 00 00 00 00 10 48 85
  RIP   __ocfs2_resv_find_window+0x498/0x760 [ocfs2]
   RSP <ffff8800ea4db668>
  ---[ end trace 566f07529f2edf3c ]---
  Kernel panic - not syncing: Fatal exception
  Kernel Offset: disabled

Link: http://lkml.kernel.org/r/20181121020023.3034-2-junxiao.bi@oracle.comSigned-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NYiwen Jiang <jiangyiwen@huawei.com>
Acked-by: NJoseph Qi <jiangqi903@gmail.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      5a404f39
    • E
      iomap: don't search past page end in iomap_is_partially_uptodate · c9dcb871
      由 Eric Sandeen 提交于 
      [ Upstream commit 3cc31fa65d85610574c0f6a474e89f4c419923d5 ]

iomap_is_partially_uptodate() is intended to check wither blocks within
the selected range of a not-uptodate page are uptodate; if the range we
care about is up to date, it's an optimization.

However, the iomap implementation continues to check all blocks up to
from+count, which is beyond the page, and can even be well beyond the
iop->uptodate bitmap.

I think the worst that will happen is that we may eventually find a zero
bit and return "not partially uptodate" when it would have otherwise
returned true, and skip the optimization.  Still, it's clearly an invalid
memory access that must be fixed.

So: fix this by limiting the search to within the page as is done in the
non-iomap variant, block_is_partially_uptodate().

Zorro noticed thiswhen KASAN went off for 512 byte blocks on a 64k
page system:

 BUG: KASAN: slab-out-of-bounds in iomap_is_partially_uptodate+0x1a0/0x1e0
 Read of size 8 at addr ffff800120c3a318 by task fsstress/22337
Reported-by: NZorro Lang <zlang@redhat.com>
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      c9dcb871
    • J
      quota: Lock s_umount in exclusive mode for Q_XQUOTA{ON,OFF} quotactls. · 876b79b9
      由 Javier Barrio 提交于 
      [ Upstream commit 41c4f85cdac280d356df1f483000ecec4a8868be ]

Commit 1fa5efe3 (ext4: Use generic helpers for quotaon
and quotaoff) made possible to call quotactl(Q_XQUOTAON/OFF) on ext4 filesystems
with sysfile quota support. This leads to calling dquot_enable/disable without s_umount
held in excl. mode, because quotactl_cmd_onoff checks only for Q_QUOTAON/OFF.

The following WARN_ON_ONCE triggers (in this case for dquot_enable, ext4, latest Linus' tree):

[  117.807056] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: quota,prjquota

[...]

[  155.036847] WARNING: CPU: 0 PID: 2343 at fs/quota/dquot.c:2469 dquot_enable+0x34/0xb9
[  155.036851] Modules linked in: quota_v2 quota_tree ipv6 af_packet joydev mousedev psmouse serio_raw pcspkr i2c_piix4 intel_agp intel_gtt e1000 ttm drm_kms_helper drm agpgart fb_sys_fops syscopyarea sysfillrect sysimgblt i2c_core input_leds kvm_intel kvm irqbypass qemu_fw_cfg floppy evdev parport_pc parport button crc32c_generic dm_mod ata_generic pata_acpi ata_piix libata loop ext4 crc16 mbcache jbd2 usb_storage usbcore sd_mod scsi_mod
[  155.036901] CPU: 0 PID: 2343 Comm: qctl Not tainted 4.20.0-rc6-00025-gf5d582777bcb #9
[  155.036903] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[  155.036911] RIP: 0010:dquot_enable+0x34/0xb9
[  155.036915] Code: 41 56 41 55 41 54 55 53 4c 8b 6f 28 74 02 0f 0b 4d 8d 7d 70 49 89 fc 89 cb 41 89 d6 89 f5 4c 89 ff e8 23 09 ea ff 85 c0 74 0a <0f> 0b 4c 89 ff e8 8b 09 ea ff 85 db 74 6a 41 8b b5 f8 00 00 00 0f
[  155.036918] RSP: 0018:ffffb09b00493e08 EFLAGS: 00010202
[  155.036922] RAX: 0000000000000001 RBX: 0000000000000008 RCX: 0000000000000008
[  155.036924] RDX: 0000000000000001 RSI: 0000000000000002 RDI: ffff9781b67cd870
[  155.036926] RBP: 0000000000000002 R08: 0000000000000000 R09: 61c8864680b583eb
[  155.036929] R10: ffffb09b00493e48 R11: ffffffffff7ce7d4 R12: ffff9781b7ee8d78
[  155.036932] R13: ffff9781b67cd800 R14: 0000000000000004 R15: ffff9781b67cd870
[  155.036936] FS:  00007fd813250b88(0000) GS:ffff9781ba000000(0000) knlGS:0000000000000000
[  155.036939] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  155.036942] CR2: 00007fd812ff61d6 CR3: 000000007c882000 CR4: 00000000000006b0
[  155.036951] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  155.036953] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  155.036955] Call Trace:
[  155.037004]  dquot_quota_enable+0x8b/0xd0
[  155.037011]  kernel_quotactl+0x628/0x74e
[  155.037027]  ? do_mprotect_pkey+0x2a6/0x2cd
[  155.037034]  __x64_sys_quotactl+0x1a/0x1d
[  155.037041]  do_syscall_64+0x55/0xe4
[  155.037078]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  155.037105] RIP: 0033:0x7fd812fe1198
[  155.037109] Code: 02 77 0d 48 89 c1 48 c1 e9 3f 75 04 48 8b 04 24 48 83 c4 50 5b c3 48 83 ec 08 49 89 ca 48 63 d2 48 63 ff b8 b3 00 00 00 0f 05 <48> 89 c7 e8 c1 eb ff ff 5a c3 48 63 ff b8 bb 00 00 00 0f 05 48 89
[  155.037112] RSP: 002b:00007ffe8cd7b050 EFLAGS: 00000206 ORIG_RAX: 00000000000000b3
[  155.037116] RAX: ffffffffffffffda RBX: 00007ffe8cd7b148 RCX: 00007fd812fe1198
[  155.037119] RDX: 0000000000000000 RSI: 00007ffe8cd7cea9 RDI: 0000000000580102
[  155.037121] RBP: 00007ffe8cd7b0f0 R08: 000055fc8eba8a9d R09: 0000000000000000
[  155.037124] R10: 00007ffe8cd7b074 R11: 0000000000000206 R12: 00007ffe8cd7b168
[  155.037126] R13: 000055fc8eba8897 R14: 0000000000000000 R15: 0000000000000000
[  155.037131] ---[ end trace 210f864257175c51 ]---

and then the syscall proceeds without s_umount locking.

This patch locks the superblock ->s_umount sem. in exclusive mode for all Q_XQUOTAON/OFF
quotactls too in addition to Q_QUOTAON/OFF.

AFAICT, other than ext4, only xfs and ocfs2 are affected by this change.
The VFS will now call in xfs_quota_* functions with s_umount held, which wasn't the case
before. This looks good to me but I can not say for sure. Ext4 and ocfs2 where already
beeing called with s_umount exclusive via quota_quotaon/off which is basically the same.
Signed-off-by: NJavier Barrio <javier.barrio.mart@gmail.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      876b79b9
    • J
      btrfs: improve error handling of btrfs_add_link · 310f8296
      由 Johannes Thumshirn 提交于 
      [ Upstream commit 1690dd41e0cb1dade80850ed8a3eb0121b96d22f ]

In the error handling block, err holds the return value of either
btrfs_del_root_ref() or btrfs_del_inode_ref() but it hasn't been checked
since it's introduction with commit fe66a05a (Btrfs: improve error
handling for btrfs_insert_dir_item callers) in 2012.

If the error handling in the error handling fails, there's not much left
to do and the abort either happened earlier in the callees or is
necessary here.

So if one of btrfs_del_root_ref() or btrfs_del_inode_ref() failed, abort
the transaction, but still return the original code of the failure
stored in 'ret' as this will be reported to the user.
Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      310f8296
    • A
      btrfs: fix use-after-free due to race between replace start and cancel · 38b17eee
      由 Anand Jain 提交于 
      [ Upstream commit d189dd70e2556181732598956d808ea53cc8774e ]

The device replace cancel thread can race with the replace start thread
and if fs_info::scrubs_running is not yet set, btrfs_scrub_cancel() will
fail to stop the scrub thread.

The scrub thread continues with the scrub for replace which then will
try to write to the target device and which is already freed by the
cancel thread.

scrub_setup_ctx() warns as tgtdev is NULL.

  struct scrub_ctx *scrub_setup_ctx(struct btrfs_device *dev, int is_dev_replace)
  {
  ...
	  if (is_dev_replace) {
		  WARN_ON(!fs_info->dev_replace.tgtdev);  <===
		  sctx->pages_per_wr_bio = SCRUB_PAGES_PER_WR_BIO;
		  sctx->wr_tgtdev = fs_info->dev_replace.tgtdev;
		  sctx->flush_all_writes = false;
	  }

  [ 6724.497655] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc started
  [ 6753.945017] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc canceled
  [ 6852.426700] WARNING: CPU: 0 PID: 4494 at fs/btrfs/scrub.c:622 scrub_setup_ctx.isra.19+0x220/0x230 [btrfs]
  ...
  [ 6852.428928] RIP: 0010:scrub_setup_ctx.isra.19+0x220/0x230 [btrfs]
  ...
  [ 6852.432970] Call Trace:
  [ 6852.433202]  btrfs_scrub_dev+0x19b/0x5c0 [btrfs]
  [ 6852.433471]  btrfs_dev_replace_start+0x48c/0x6a0 [btrfs]
  [ 6852.433800]  btrfs_dev_replace_by_ioctl+0x3a/0x60 [btrfs]
  [ 6852.434097]  btrfs_ioctl+0x2476/0x2d20 [btrfs]
  [ 6852.434365]  ? do_sigaction+0x7d/0x1e0
  [ 6852.434623]  do_vfs_ioctl+0xa9/0x6c0
  [ 6852.434865]  ? syscall_trace_enter+0x1c8/0x310
  [ 6852.435124]  ? syscall_trace_enter+0x1c8/0x310
  [ 6852.435387]  ksys_ioctl+0x60/0x90
  [ 6852.435663]  __x64_sys_ioctl+0x16/0x20
  [ 6852.435907]  do_syscall_64+0x50/0x180
  [ 6852.436150]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Further, as the replace thread enters scrub_write_page_to_dev_replace()
without the target device it panics:

  static int scrub_add_page_to_wr_bio(struct scrub_ctx *sctx,
				      struct scrub_page *spage)
  {
  ...
	bio_set_dev(bio, sbio->dev->bdev); <======

  [ 6929.715145] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0
  ..
  [ 6929.717106] Workqueue: btrfs-scrub btrfs_scrub_helper [btrfs]
  [ 6929.717420] RIP: 0010:scrub_write_page_to_dev_replace+0xb4/0x260
  [btrfs]
  ..
  [ 6929.721430] Call Trace:
  [ 6929.721663]  scrub_write_block_to_dev_replace+0x3f/0x60 [btrfs]
  [ 6929.721975]  scrub_bio_end_io_worker+0x1af/0x490 [btrfs]
  [ 6929.722277]  normal_work_helper+0xf0/0x4c0 [btrfs]
  [ 6929.722552]  process_one_work+0x1f4/0x520
  [ 6929.722805]  ? process_one_work+0x16e/0x520
  [ 6929.723063]  worker_thread+0x46/0x3d0
  [ 6929.723313]  kthread+0xf8/0x130
  [ 6929.723544]  ? process_one_work+0x520/0x520
  [ 6929.723800]  ? kthread_delayed_work_timer_fn+0x80/0x80
  [ 6929.724081]  ret_from_fork+0x3a/0x50

Fix this by letting the btrfs_dev_replace_finishing() to do the job of
cleaning after the cancel, including freeing of the target device.
btrfs_dev_replace_finishing() is called when btrfs_scub_dev() returns
along with the scrub return status.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      38b17eee
    • H
      btrfs: alloc_chunk: fix more DUP stripe size handling · 720b86a5
      由 Hans van Kranenburg 提交于 
      [ Upstream commit baf92114c7e6dd6124aa3d506e4bc4b694da3bc3 ]

Commit 92e222df "btrfs: alloc_chunk: fix DUP stripe size handling"
fixed calculating the stripe_size for a new DUP chunk.

However, the same calculation reappears a bit later, and that one was
not changed yet. The resulting bug that is exposed is that the newly
allocated device extents ('stripes') can have a few MiB overlap with the
next thing stored after them, which is another device extent or the end
of the disk.

The scenario in which this can happen is:
* The block device for the filesystem is less than 10GiB in size.
* The amount of contiguous free unallocated disk space chosen to use for
  chunk allocation is 20% of the total device size, or a few MiB more or
  less.

An example:
- The filesystem device is 7880MiB (max_chunk_size gets set to 788MiB)
- There's 1578MiB unallocated raw disk space left in one contiguous
  piece.

In this case stripe_size is first calculated as 789MiB, (half of
1578MiB).

Since 789MiB (stripe_size * data_stripes) > 788MiB (max_chunk_size), we
enter the if block. Now stripe_size value is immediately overwritten
while calculating an adjusted value based on max_chunk_size, which ends
up as 788MiB.

Next, the value is rounded up to a 16MiB boundary, 800MiB, which is
actually more than the value we had before. However, the last comparison
fails to detect this, because it's comparing the value with the total
amount of free space, which is about twice the size of stripe_size.

In the example above, this means that the resulting raw disk space being
allocated is 1600MiB, while only a gap of 1578MiB has been found. The
second device extent object for this DUP chunk will overlap for 22MiB
with whatever comes next.

The underlying problem here is that the stripe_size is reused all the
time for different things. So, when entering the code in the if block,
stripe_size is immediately overwritten with something else. If later we
decide we want to have the previous value back, then the logic to
compute it was copy pasted in again.

With this change, the value in stripe_size is not unnecessarily
destroyed, so the duplicated calculation is not needed any more.
Signed-off-by: NHans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      720b86a5
    • Q
      btrfs: volumes: Make sure there is no overlap of dev extents at mount time · bb5717a4
      由 Qu Wenruo 提交于 
      [ Upstream commit 5eb193812a42dc49331f25137a38dfef9612d3e4 ]

Enhance btrfs_verify_dev_extents() to remember previous checked dev
extents, so it can verify no dev extents can overlap.

Analysis from Hans:

"Imagine allocating a DATA|DUP chunk.

 In the chunk allocator, we first set...
   max_stripe_size = SZ_1G;
   max_chunk_size = BTRFS_MAX_DATA_CHUNK_SIZE
 ... which is 10GiB.

 Then...
   /* we don't want a chunk larger than 10% of writeable space */
   max_chunk_size = min(div_factor(fs_devices->total_rw_bytes, 1),
       		 max_chunk_size);

 Imagine we only have one 7880MiB block device in this filesystem. Now
 max_chunk_size is down to 788MiB.

 The next step in the code is to search for max_stripe_size * dev_stripes
 amount of free space on the device, which is in our example 1GiB * 2 =
 2GiB. Imagine the device has exactly 1578MiB free in one contiguous
 piece. This amount of bytes will be put in devices_info[ndevs - 1].max_avail

 Next we recalculate the stripe_size (which is actually the device extent
 length), based on the actual maximum amount of available raw disk space:
   stripe_size = div_u64(devices_info[ndevs - 1].max_avail, dev_stripes);

 stripe_size is now 789MiB

 Next we do...
   data_stripes = num_stripes / ncopies
 ...where data_stripes ends up as 1, because num_stripes is 2 (the amount
 of device extents we're going to have), and DUP has ncopies 2.

 Next there's a check...
   if (stripe_size * data_stripes > max_chunk_size)
 ...which matches because 789MiB * 1 > 788MiB.

 We go into the if code, and next is...
   stripe_size = div_u64(max_chunk_size, data_stripes);
 ...which resets stripe_size to max_chunk_size: 788MiB

 Next is a fun one...
   /* bump the answer up to a 16MB boundary */
   stripe_size = round_up(stripe_size, SZ_16M);
 ...which changes stripe_size from 788MiB to 800MiB.

 We're not done changing stripe_size yet...
   /* But don't go higher than the limits we found while searching
    * for free extents
    */
   stripe_size = min(devices_info[ndevs - 1].max_avail,
       	      stripe_size);

 This is bad. max_avail is twice the stripe_size (we need to fit 2 device
 extents on the same device for DUP).

 The result here is that 800MiB < 1578MiB, so it's unchanged. However,
 the resulting DUP chunk will need 1600MiB disk space, which isn't there,
 and the second dev_extent might extend into the next thing (next
 dev_extent? end of device?) for 22MiB.

 The last shown line of code relies on a situation where there's twice
 the value of stripe_size present as value for the variable stripe_size
 when it's DUP. This was actually the case before commit 92e222df
 "btrfs: alloc_chunk: fix DUP stripe size handling", from which I quote:
   "[...] in the meantime there's a check to see if the stripe_size does
 not exceed max_chunk_size. Since during this check stripe_size is twice
 the amount as intended, the check will reduce the stripe_size to
 max_chunk_size if the actual correct to be used stripe_size is more than
 half the amount of max_chunk_size."

 In the previous version of the code, the 16MiB alignment (why is this
 done, by the way?) would result in a 50% chance that it would actually
 do an 8MiB alignment for the individual dev_extents, since it was
 operating on double the size. Does this matter?

 Does it matter that stripe_size can be set to anything which is not
 16MiB aligned because of the amount of remaining available disk space
 which is just taken?

 What is the main purpose of this round_up?

 The most straightforward thing to do seems something like...
   stripe_size = min(
       div_u64(devices_info[ndevs - 1].max_avail, dev_stripes),
       stripe_size
   )
 ..just putting half of the max_avail into stripe_size."

Link: https://lore.kernel.org/linux-btrfs/b3461a38-e5f8-f41d-c67c-2efac8129054@mendix.com/Reported-by: NHans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
[ add analysis from report ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      bb5717a4
    • J
      pstore/ram: Do not treat empty buffers as valid · 265242d8
      由 Joel Fernandes (Google) 提交于 
      [ Upstream commit 30696378f68a9e3dad6bfe55938b112e72af00c2 ]

The ramoops backend currently calls persistent_ram_save_old() even
if a buffer is empty. While this appears to work, it is does not seem
like the right thing to do and could lead to future bugs so lets avoid
that. It also prevents misleading prints in the logs which claim the
buffer is valid.

I got something like:

	found existing buffer, size 0, start 0

When I was expecting:

	no valid data in buffer (sig = ...)

This bails out early (and reports with pr_debug()), since it's an
acceptable state.
Signed-off-by: NJoel Fernandes (Google) <joel@joelfernandes.org>
Co-developed-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      265242d8
    • D
      jffs2: Fix use of uninitialized delayed_work, lockdep breakage · c356972f
      由 Daniel Santos 提交于 
      [ Upstream commit a788c5272769ddbcdbab297cf386413eeac04463 ]

jffs2_sync_fs makes the assumption that if CONFIG_JFFS2_FS_WRITEBUFFER
is defined then a write buffer is available and has been initialized.
However, this does is not the case when the mtd device has no
out-of-band buffer:

int jffs2_nand_flash_setup(struct jffs2_sb_info *c)
{
        if (!c->mtd->oobsize)
                return 0;
...

The resulting call to cancel_delayed_work_sync passing a uninitialized
(but zeroed) delayed_work struct forces lockdep to become disabled.

[   90.050639] overlayfs: upper fs does not support tmpfile.
[   90.652264] INFO: trying to register non-static key.
[   90.662171] the code is fine but needs lockdep annotation.
[   90.673090] turning off the locking correctness validator.
[   90.684021] CPU: 0 PID: 1762 Comm: mount_root Not tainted 4.14.63 #0
[   90.696672] Stack : 00000000 00000000 80d8f6a2 00000038 805f0000 80444600 8fe364f4 805dfbe7
[   90.713349]         80563a30 000006e2 8068370c 00000001 00000000 00000001 8e2fdc48 ffffffff
[   90.730020]         00000000 00000000 80d90000 00000000 00000106 00000000 6465746e 312e3420
[   90.746690]         6b636f6c 03bf0000 f8000000 20676e69 00000000 80000000 00000000 8e2c2a90
[   90.763362]         80d90000 00000001 00000000 8e2c2a90 00000003 80260dc0 08052098 80680000
[   90.780033]         ...
[   90.784902] Call Trace:
[   90.789793] [<8000f0d8>] show_stack+0xb8/0x148
[   90.798659] [<8005a000>] register_lock_class+0x270/0x55c
[   90.809247] [<8005cb64>] __lock_acquire+0x13c/0xf7c
[   90.818964] [<8005e314>] lock_acquire+0x194/0x1dc
[   90.828345] [<8003f27c>] flush_work+0x200/0x24c
[   90.837374] [<80041dfc>] __cancel_work_timer+0x158/0x210
[   90.847958] [<801a8770>] jffs2_sync_fs+0x20/0x54
[   90.857173] [<80125cf4>] iterate_supers+0xf4/0x120
[   90.866729] [<80158fc4>] sys_sync+0x44/0x9c
[   90.875067] [<80014424>] syscall_common+0x34/0x58
Signed-off-by: NDaniel Santos <daniel.santos@pobox.com>
Reviewed-by: NHou Tao <houtao1@huawei.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      c356972f
  9. 23 1月, 2019 3 次提交
    • J
      blockdev: Fix livelocks on loop device · 1e11b1d6
      由 Jan Kara 提交于 
      commit 04906b2f542c23626b0ef6219b808406f8dddbe9 upstream.

bd_set_size() updates also block device's block size. This is somewhat
unexpected from its name and at this point, only blkdev_open() uses this
functionality. Furthermore, this can result in changing block size under
a filesystem mounted on a loop device which leads to livelocks inside
__getblk_gfp() like:

Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 10863 Comm: syz-executor0 Not tainted 4.18.0-rc5+ #151
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
01/01/2011
RIP: 0010:__sanitizer_cov_trace_pc+0x3f/0x50 kernel/kcov.c:106
...
Call Trace:
 init_page_buffers+0x3e2/0x530 fs/buffer.c:904
 grow_dev_page fs/buffer.c:947 [inline]
 grow_buffers fs/buffer.c:1009 [inline]
 __getblk_slow fs/buffer.c:1036 [inline]
 __getblk_gfp+0x906/0xb10 fs/buffer.c:1313
 __bread_gfp+0x2d/0x310 fs/buffer.c:1347
 sb_bread include/linux/buffer_head.h:307 [inline]
 fat12_ent_bread+0x14e/0x3d0 fs/fat/fatent.c:75
 fat_ent_read_block fs/fat/fatent.c:441 [inline]
 fat_alloc_clusters+0x8ce/0x16e0 fs/fat/fatent.c:489
 fat_add_cluster+0x7a/0x150 fs/fat/inode.c:101
 __fat_get_block fs/fat/inode.c:148 [inline]
...

Trivial reproducer for the problem looks like:

truncate -s 1G /tmp/image
losetup /dev/loop0 /tmp/image
mkfs.ext4 -b 1024 /dev/loop0
mount -t ext4 /dev/loop0 /mnt
losetup -c /dev/loop0
l /mnt

Fix the problem by moving initialization of a block device block size
into a separate function and call it when needed.

Thanks to Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> for help with
debugging the problem.

Reported-by: syzbot+9933e4476f365f5d5a1b@syzkaller.appspotmail.com
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1e11b1d6
    • K
      pstore/ram: Avoid allocation and leak of platform data · 483ac8e6
      由 Kees Cook 提交于 
      commit 5631e8576a3caf606cdc375f97425a67983b420c upstream.

Yue Hu noticed that when parsing device tree the allocated platform data
was never freed. Since it's not used beyond the function scope, this
switches to using a stack variable instead.
Reported-by: NYue Hu <huyue2@yulong.com>
Fixes: 35da6094 ("pstore/ram: add Device Tree bindings")
Cc: stable@vger.kernel.org
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      483ac8e6
    • J
      btrfs: wait on ordered extents on abort cleanup · 01634ac5
      由 Josef Bacik 提交于 
      commit 74d5d229b1bf60f93bff244b2dfc0eb21ec32a07 upstream.

If we flip read-only before we initiate writeback on all dirty pages for
ordered extents we've created then we'll have ordered extents left over
on umount, which results in all sorts of bad things happening.  Fix this
by making sure we wait on ordered extents if we have to do the aborted
transaction cleanup stuff.

generic/475 can produce this warning:

 [ 8531.177332] WARNING: CPU: 2 PID: 11997 at fs/btrfs/disk-io.c:3856 btrfs_free_fs_root+0x95/0xa0 [btrfs]
 [ 8531.183282] CPU: 2 PID: 11997 Comm: umount Tainted: G        W 5.0.0-rc1-default+ #394
 [ 8531.185164] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014
 [ 8531.187851] RIP: 0010:btrfs_free_fs_root+0x95/0xa0 [btrfs]
 [ 8531.193082] RSP: 0018:ffffb1ab86163d98 EFLAGS: 00010286
 [ 8531.194198] RAX: ffff9f3449494d18 RBX: ffff9f34a2695000 RCX:0000000000000000
 [ 8531.195629] RDX: 0000000000000002 RSI: 0000000000000001 RDI:0000000000000000
 [ 8531.197315] RBP: ffff9f344e930000 R08: 0000000000000001 R09:0000000000000000
 [ 8531.199095] R10: 0000000000000000 R11: ffff9f34494d4ff8 R12:ffffb1ab86163dc0
 [ 8531.200870] R13: ffff9f344e9300b0 R14: ffffb1ab86163db8 R15:0000000000000000
 [ 8531.202707] FS:  00007fc68e949fc0(0000) GS:ffff9f34bd800000(0000)knlGS:0000000000000000
 [ 8531.204851] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [ 8531.205942] CR2: 00007ffde8114dd8 CR3: 000000002dfbd000 CR4:00000000000006e0
 [ 8531.207516] Call Trace:
 [ 8531.208175]  btrfs_free_fs_roots+0xdb/0x170 [btrfs]
 [ 8531.210209]  ? wait_for_completion+0x5b/0x190
 [ 8531.211303]  close_ctree+0x157/0x350 [btrfs]
 [ 8531.212412]  generic_shutdown_super+0x64/0x100
 [ 8531.213485]  kill_anon_super+0x14/0x30
 [ 8531.214430]  btrfs_kill_super+0x12/0xa0 [btrfs]
 [ 8531.215539]  deactivate_locked_super+0x29/0x60
 [ 8531.216633]  cleanup_mnt+0x3b/0x70
 [ 8531.217497]  task_work_run+0x98/0xc0
 [ 8531.218397]  exit_to_usermode_loop+0x83/0x90
 [ 8531.219324]  do_syscall_64+0x15b/0x180
 [ 8531.220192]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
 [ 8531.221286] RIP: 0033:0x7fc68e5e4d07
 [ 8531.225621] RSP: 002b:00007ffde8116608 EFLAGS: 00000246 ORIG_RAX:00000000000000a6
 [ 8531.227512] RAX: 0000000000000000 RBX: 00005580c2175970 RCX:00007fc68e5e4d07
 [ 8531.229098] RDX: 0000000000000001 RSI: 0000000000000000 RDI:00005580c2175b80
 [ 8531.230730] RBP: 0000000000000000 R08: 00005580c2175ba0 R09:00007ffde8114e80
 [ 8531.232269] R10: 0000000000000000 R11: 0000000000000246 R12:00005580c2175b80
 [ 8531.233839] R13: 00007fc68eac61c4 R14: 00005580c2175a68 R15:0000000000000000

Leaving a tree in the rb-tree:

3853 void btrfs_free_fs_root(struct btrfs_root *root)
3854 {
3855         iput(root->ino_cache_inode);
3856         WARN_ON(!RB_EMPTY_ROOT(&root->inode_tree));

CC: stable@vger.kernel.org
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
[ add stacktrace ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      01634ac5