Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

With the recent Kconfig changes we need to now enable
the PHYs to keep USB working.
Signed-off-by: NTony Lindgren <tony@atomide.com>

Enable ADC and DAC IIO drivers for LPC18xx/43xx SoCs.
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

To allow regression build testing of multi v4t systems, add a
multi_v4t_defconfig, similar to the multi_v5(v7)_defconfig.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

ACT8945A is the PMIC present on the sama5d2 Xplained.
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Include ACT8945A mfd, regulator and power drivers.
Signed-off-by: NWenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Add CONFIG_TOUCHSCREEN_ADS7846 support.
Signed-off-by: NDiego Dorta <diego.dorta@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NAndy Gross <andy.gross@linaro.org>

- dts: rename 'ide-disk' to 'disk-activity'
- platform: rename 'ide-disk' to 'disk-activity'
- defconfig: rename 'LEDS_TRIGGER_IDE_DISK' to 'LEDS_TRIGGER_DISK'
Signed-off-by: NStephan Linz <linz@li-pro.net>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Acked-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com>

The Virtual Video Test Driver can be used to emulate video capture and
output devices so it's very useful for testing. Since is not necessary
to boot, can be enabled as module to avoid increasing the kernel size.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>

The Virtual Video Test Driver can be used to emulate video capture and
output devices so it's very useful for testing. Since is not necessary
to boot, can be enabled as module to avoid increasing the kernel size.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>

After enabling this I get pins, GPIO, keys and everything on
the MSM8660 surf (APQ8660 DragonBoard).
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NAndy Gross <andy.gross@linaro.org>

The USB Function FS gadget can be very useful for debugging.

For instance, the adbd daemon can leverage this gadget to
offer an ADB connection to the platform over USB.

Note that adbd is available on many OS/build systems:
- Ubuntu: see android-tools-adbd package [1]
- Yocto: see meta-smartphone android-tools recipe [2]
- Buildroot: see android-tools package [3]

[1] http://packages.ubuntu.com/trusty/android-tools-adbd
[2] https://github.com/shr-distribution/meta-smartphone/tree/shr/meta-android/recipes-android/android-tools
[3] https://git.buildroot.net/buildroot/tree/package/android-toolsSigned-off-by: NGary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable the PL330 DMA and DMATEST on SoCFPGA.

make savedefconfig says CONFIG_FHANDLE is not needed in the defconfig,
remove it.
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>
---
v2: Also enable DMATEST as a kernel module

Enable Altera PCIe host driver, Altera MSI driver and PCIe devices.

CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCIE_ALTERA=y
CONFIG_PCIE_ALTERA_MSI=y
CONFIG_BLK_DEV_NVME=m
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_IXGBE=m
Signed-off-by: NLey Foon Tan <lftan@altera.com>
Signed-off-by: NTien Hock Loh <thloh@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>

Enable support for r8a7792 SoC in multi_v7_defconfig.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Enable support for r8a7792 SoC in shmobile_defconfig.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

We have everything we need in multi_v7_defconfig that exists in
bcm_defconfig, so get rid of that file to reduce the maintenance burden.
Acked-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

In order to get rid of bcm_defconfig, enable this driver which is needed
by some Broadcom SoCs based on the Kona architecture to reboot.
Acked-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

Acked-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

The BCM7038 watchdog is used by all Broadcom STB SoCs but is not needed
for system reboot, we just turn it on as a module.
Acked-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

Enable the Broadcom AHCI driver and its companion PHY driver to get
functional SATA3 support.
Acked-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

At some boards, it has no ethernet support. As an alternative, we can use
USB Ethernet card to support NFS (u-boot supports it too). It supports
AXIS cards which are used most frequently.
Signed-off-by: NPeter Chen <peter.chen@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable the following bits:

CONFIG_TOUCHSCREEN_STMPE
 - STMPE touchscreen support, needed on MCVEVK as it contains the
   chip. This also enables the STMPE MFD device and touchscreen
   input support.

CONFIG_USB_STORAGE
 - USB storage support is often used, so enable it.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>

Enable Atmel ARMv5 platforms in multi_v5
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Newer Keystone 2 devices utilize pinmuxing. Enable PINCTRL SINGLE
which is used to handle pinmuxing.
Signed-off-by: NFranklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: NKeerthy <j-keerthy@ti.com>
Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org>

Save defconfig on next-20160602. Most of changes are just re-ordering of
symbols.  Removed symbols:
 - FHANDLE (default y),
 - THERMAL, EXYNOS_THERMAL (selected by ARCH_EXYNOS),
 - CHROME_PLATFORMS (selected by MFD_CROS_EC),
 - EXT4_FS (selected by EXT3_FS)
 - SND_SOC_ODROIDX2 (obsolete since commit ee12a817 ("ASoC: samsung:
   Remove unused Odroid x2/u3 machine driver"), replaced with
   SND_SIMPLE_CARD).

Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>

The Exynos SoC provides a Security SubSystem block for accelerating some
cryptographic operations.  Enable the driver for it - s5p-secss to
utilize the hardware acceleration.

Currently the s5p-secss driver supports AES in CBC and ECB modes.
However its usefulness could be doubted. Excerpt of tests on Odroid XU3
(Exynos5422), for 256 bit key, encryption, performance CPU freq governor:

  algorithm        | block size [b] | average speed [MB/s] |
  cbc-aes-s5p      |             16 |                 11.5 |
  cbc-aes-s5p      |             64 |                 25.4 |
  cbc-aes-s5p      |            256 |                 41.0 |
  cbc-aes-s5p      |           1024 |                 47.4 |
  cbc-aes-s5p      |           8192 |                 49.0 |
  cbc(aes-generic) |             16 |                  0.4 |
  cbc(aes-generic) |             64 |                  1.8 |
  cbc(aes-generic) |            256 |                  6.6 |
  cbc(aes-generic) |           1024 |                 25.2 |
  cbc(aes-generic) |           8192 |                 83.1 |

Anyway enable the driver so it will get some testing coverage by
community.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>

Enable drivers needed to get Exynos 4210 Universal C210 board working:
MAX8998 MFD and regulators, GPIO-based bit-bang SPI, Exynos DRM FIMD
parallel output and Samsung LD9040 RGB panel.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>

The Exynos4412-based Trats2 board has CM36651 proximity/ambient light
sensor, MMS114 touchscreen and Wolfson Microelectronics WM1811 CODEC.
Enable them in defconfig to get some testing coverage and use its
features.

While saving defconfig the SND_SOC_ODROIDX2 is removed because it does
not exist since commit ee12a817 ("ASoC: samsung: Remove unused
Odroid x2/u3 machine driver").
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>

Enable the required drivers and subsystems to bring-up networking on
Broadcom's Set-top Box SoCs: BCMGENET and SF2. These two drivers both
have proper dependencies on their internal PHY and MDIO drivers.
Acked-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

Enable ARCH_BCM_63XX to build ARM-specific boot and SMP code, as well as
the serial console driver for this platform.
Acked-by: NScott Branden <scott.branden@broadcom.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

The driver can be built as a module, so use this possibility.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>

Exynos SoCs have a Multi Format Video Hardware Codec (MFC) IP block that
can be used to {en,de}code video streams by hardware. Enable support for
its driver as a module so the MFC can be tested.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>

Exynos SoCs have a Multi Format Video Hardware Codec (MFC) IP block that
can be used to {en,de}code video streams by hardware. Enable support for
its driver as a module so the MFC can be tested.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>

There are a bunch of media platform drivers under drivers/media/platform/
for Samsung SoCs that are enabled in exynos_defconfig but no in multi_v7.

This patch enables them as a module to improve build coverage for these
drivers and also to allow people use them with proper hardware if modules
are installed.
Suggested-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>

There are a bunch of media platform drivers under drivers/media/platform/
that are for Samsung SoCs but are not being built with exynos_defconfig.

This patch enables them as a module to improve build coverage for these
drivers and also to allow people use them with proper hardware if modules
are installed. The S5P MFC driver wasn't enabled since it fails to probe.

Only the boolean Kconfig symbols are enabled as built-in, since drivers
are not critical and also to keep the kernel binary image size as small
as possible.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>

Mixer driver is selected by CONFIG_DRM_EXYNOS_HDMI option. Since Exynos5433
HDMI does not require Mixer and there are separate options to select Mixer
and HDMI.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>

Enable the new DRM driver in the sunxi default configuration
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>