ARM: config: Add a multi_v4t_defconfig

To allow regression build testing of multi v4t systems, add a
multi_v4t_defconfig, similar to the multi_v5(v7)_defconfig.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

arch/arm/configs/multi_v4t_defconfig

+CONFIG_KERNEL_LZMA=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+CONFIG_SLOB=y
+CONFIG_JUMP_LABEL=y
+# CONFIG_LBDAF is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_MULTI_V4T=y
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_AT91=y
+CONFIG_SOC_AT91RM9200=y
+CONFIG_ARCH_CLPS711X=y
+CONFIG_ARCH_INTEGRATOR=y
+CONFIG_ARCH_INTEGRATOR_AP=y
+CONFIG_INTEGRATOR_IMPD1=y
+CONFIG_INTEGRATOR_CM720T=y
+CONFIG_INTEGRATOR_CM920T=y
+CONFIG_INTEGRATOR_CM922T_XA10=y
+CONFIG_ARCH_MXC=y
+CONFIG_MACH_SCB9328=y
+CONFIG_MACH_APF9328=y
+CONFIG_MACH_IMX1_DT=y
+CONFIG_ARCH_NSPIRE=y
+CONFIG_AEABI=y
+# CONFIG_ATAGS is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CPU_IDLE=y
+CONFIG_ARM_CPUIDLE=y
+CONFIG_ARM_CLPS711X_CPUIDLE=y
+# CONFIG_COREDUMP is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_GPIO=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_CLPS711X=y
+CONFIG_SERIAL_CLPS711X_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_AT91=y
+CONFIG_I2C_GPIO=y
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_CLPS711X=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_IMX=y
+CONFIG_PINCTRL_AT91PIO4=y
+CONFIG_GPIO_74XX_MMIO=y
+CONFIG_GPIO_CLPS711X=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_SYSCON=y
+CONFIG_W1=y
+CONFIG_W1_MASTER_MXC=y
+CONFIG_W1_MASTER_GPIO=y
+CONFIG_POWER_RESET_AT91_POWEROFF=y
+CONFIG_POWER_RESET_AT91_RESET=y
+CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_POWER_RESET_SYSCON_POWEROFF=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_GPIO_WATCHDOG=y
+CONFIG_AT91RM9200_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_FB=y
+CONFIG_FB_CLPS711X=y
+CONFIG_FB_IMX=y
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_PWM=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PWM=y
+CONFIG_PWM_ATMEL=y
+CONFIG_PWM_CLPS711X=y
+CONFIG_PWM_IMX=y
+CONFIG_EXT2_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_CRAMFS=y
+CONFIG_MINIX_FS=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRC_CCITT=y