- 03 2月, 2008 2 次提交
-
-
由 Michael Hennerich 提交于
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com> Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
This patch removes the no longer required dependency of IBMLANA on MCA_LEGACY. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 1月, 2008 2 次提交
-
-
由 Linus Torvalds 提交于
Both the old e1000 driver and the new e1000e driver can drive some PCI-Express e1000 cards, and we should avoid ambiguity about which driver will pick up the support for those cards when both drivers are enabled. This solves the problem by having the old driver support those cards if the new driver isn't configured, but otherwise ceding support for PCI Express versions of the e1000 chipset to the newer driver. Thus allowing both legacy configurations where only the old driver is active (and handles all chips it knows about) and the new configuration with the new driver handling the more modern PCIE variants. Acked-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
The new e1000e driver is apparently not yet suitable for general use, so mark it experimental, and re-instate all the PCI-Express device IDs in the old and stable e1000 driver so that people (namely me) can continue to use a driver that actually works. Auke & co have been appraised of the situation. Cc: Auke Kok <auke-jan.h.kok@intel.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 1月, 2008 9 次提交
-
-
由 Auke Kok 提交于
We are pleased to announce a new Gigabit Ethernet product and its driver to the linux community. This product is the Intel(R) 82575 Gigabit Ethernet adapter family. Physical adapters will be available to the public soon. These adapters come in 2- and 4-port versions (copper PHY) currently. Other variants will be available later. The 82575 chipset supports significantly different features that warrant a new driver. The descriptor format is (just like the ixgbe driver) different. The device can use multiple MSI-X vectors and multiple queues for both send and receive. This allows us to optimize some of the driver code specifically as well compared to the e1000-supported devices. This version of the igb driver no lnger uses fake netdevices and incorporates napi_struct members for each ring to do the multi- queue polling. multi-queue is enabled by default and the driver supports NAPI mode only. All the namespace collisions should be gone in this version too. The register macro's have been condensed to improve readability. Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Claudio Lanconelli 提交于
Signed-off-by: NClaudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Thomas Bogendoerfer 提交于
- Use inline functions for dma_sync_* instead of macros - added Kconfig change to make selection for similair SGI boxes easier Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Lee Schermerhorn 提交于
The bnx2x module depends on the zlib_inflate functions. The build will fail if ZLIB_INFLATE has not been selected manually or by building another module that automatically selects it. Modify BNX2X config option to 'select ZLIB_INFLATE' like BNX2 and others. This seems to fix it. Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: NEliezer Tamir <eliezert@broadcom.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Olof Johansson 提交于
pasemi_mac: Software-based LRO support Implement LRO for pasemi_mac. Pretty straightforward. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Eliezer Tamir 提交于
Signed-off-by: NEliezer Tamir <eliezert@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sten Wang 提交于
This patch adds support for the RDC R6040 MAC we can find in the RDC R-321x System-on-chips. Signed-off-by: NSten Wang <sten.wang@rdc.com.tw> Signed-off-by: NDaniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
-
由 Adrian Bunk 提交于
This patch contains the scheduled removal of the shaper driver. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Acked-by: NAlan Cox <alan@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kumar Gala 提交于
* Allow multiple boards to be selected in a single build * Removed Kconfig option '85xx' which existed only for compat with arch/ppc * Added a multiplatform 85xx defconfig (mpc85xx_defconfig). This builds all 85xx boards except sbc8560 and stx_gp3 since these to boards have board specific ifdef in driver code that may break all other boards Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 26 1月, 2008 1 次提交
-
-
由 Andrew Victor 提交于
Add support for Atmel's AT91CAP9 Customizable Microcontroller family. <http://www.atmel.com/products/AT91CAP/Default.asp> Signed-off-by: NStelian Pop <stelian@popies.net> Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 23 1月, 2008 1 次提交
-
-
由 Johann Felix Soden 提交于
Fix typo in arch/powerpc/boot/flatdevtree_env.h. There is no Documentation/networking/ixgbe.txt. README.cycladesZ is now in Documentation/. wavelan.p.h is now in drivers/net/wireless/. HFS.txt is now Documentation/filesystems/hfs.txt. OSS-files are now in sound/oss/. Signed-off-by: NJohann Felix Soden <johfel@users.sourceforge.net> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 1月, 2008 1 次提交
-
-
由 Jason Uhlenkott 提交于
There is no Documentation/networking/e1000e.txt. Signed-off-by: NJason Uhlenkott <jasonuhl@jasonuhl.org> Cc: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 13 1月, 2008 1 次提交
-
-
由 Stephen Hemminger 提交于
Move the ip1000 driver into the expected place for gigabit cards in the configuration menu structure. It should be under the gigabit cards, not at the top level. Signed-off-by: NStephen Hemminger <stephen.hemminger@vyatta.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 12 12月, 2007 1 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit 70eba18b, as per Jeff Garzik: "That was meant for 2.6.25, and actually (due to patching) applied to a completely unrelated 2.6.24 net driver." Noted-by: NRoland Dreier <rdreier@cisco.com> Requested-by: NJeff Garzik <jgarzik@pobox.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 12月, 2007 1 次提交
-
-
由 Eliezer Tamir 提交于
The bnx2x module depends on the zlib_inflate functions. The build will fail if ZLIB_INFLATE has not been selected manually or by building another module that automatically selects it. Modify BNX2X config option to 'select ZLIB_INFLATE' like BNX2 and others. This seems to fix it. Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: NEliezer Tamir <eliezert@broadcom.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 02 12月, 2007 1 次提交
-
-
由 Paul Mundt 提交于
The smc911x.h is a bit of a mess, not supporting any sort of generic configuration. For the moment only ARCH_PXA and SH_MAGIC_PANEL_R2 have suitable definitions, so we reflect this in the Kconfig also. While there are other SH boards that will likely turn this on in the 2.6.25 time frame, it's not worth trying to stub around at the moment. Fixes up the allmodconfig build, as noted by akpm. Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 24 11月, 2007 1 次提交
-
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <michael.frysinger@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 13 11月, 2007 1 次提交
-
-
由 Adrian Bunk 提交于
When I removed net-modules.txt because it only contained ancient information I missed that many Kconfig entries pointed to this ancient information. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 11月, 2007 1 次提交
-
-
由 Magnus Damm 提交于
ax88796: add superh to kconfig dependencies This patch adds sh architecture support to the ax88796 kconfig. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 07 11月, 2007 1 次提交
-
-
由 Rusty Russell 提交于
It'd also be nice to mention "containers" somewhere in the help text (I'm assuming that's what it's for?). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 11月, 2007 1 次提交
-
-
由 Grant Likely 提交于
When not building an arch/powerpc kernel, the mpc5200 FEC driver depends on some symbols which are not defined (BESTCOMM & BESTCOMM_FEC). This patch flips around the dependancy logic so that it cannot be selected unless BESTCOMM_FEC is selected first. Kconfig stops complaining this way. Also, the driver only works for arch/powerpc (not arch/ppc) anyway so it should depend on PPC_MERGE also. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 29 10月, 2007 3 次提交
-
-
由 Domen Puncer 提交于
Driver for ethernet on mpc5200/mpc5200b SoCs (FEC). Signed-off-by: NDomen Puncer <domen.puncer@telargo.com> Acked-by: NDale Farnsworth <dale@farnsworth.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Francois Romieu 提交于
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Avuton Olrich <avuton@gmail.com> Cc: Jesse Huang <jesse@icplus.com.tw> Cc: Sorbica Shieh <sorbica@icplus.com.tw>
-
由 Francois Romieu 提交于
Fix for the error below while linking vmlinux: [...] drivers/built-in.o: In function `ipg_ioctl': drivers/net/ipg.c:2148: undefined reference to `generic_mii_ioctl' drivers/built-in.o: In function `ipg_get_settings': drivers/net/ipg.c:2181: undefined reference to `mii_ethtool_gset' drivers/built-in.o: In function `ipg_set_settings': drivers/net/ipg.c:2193: undefined reference to `mii_ethtool_sset' drivers/built-in.o: In function `ipg_nway_reset': drivers/net/ipg.c:2205: undefined reference to `mii_nway_restart' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Avuton Olrich <avuton@gmail.com> Cc: Jesse Huang <jesse@icplus.com.tw> Cc: Sorbica Shieh <sorbica@icplus.com.tw>
-
- 23 10月, 2007 2 次提交
-
-
由 Lennert Buytenhek 提交于
Allow Orion ARM platforms to use the mv643xx_eth driver. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Acked-by: NTzachi Perelstein <tzachi@marvell.com> Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
-
由 Rusty Russell 提交于
The network driver uses two virtqueues: one for input packets and one for output packets. This has nice locking properties (ie. we don't do any for recv vs send). TODO: 1) Big packets. 2) Multi-client devices (maybe separate driver?). 3) Resolve freeing of old xmit skbs (Christian Borntraeger) Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: netdev@vger.kernel.org
-
- 20 10月, 2007 3 次提交
-
-
由 Randy Dunlap 提交于
[bugme-daemon@bugzilla.kernel.org wrote:] From: Randy Dunlap <randy.dunlap@oracle.com> Drivers that use lro functions should depend on INET, otherwise they may not link correctly. Let's not select INET. Select should be used only for library-like code, not to enable subsystems. ERROR: "lro_flush_all" [drivers/net/myri10ge/myri10ge.ko] undefined! ERROR: "lro_receive_frags" [drivers/net/myri10ge/myri10ge.ko] undefined! Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Randy Dunlap 提交于
- make the kconfig NAPI option prompt consistent across all net drivers (other than EXPERIMENTAL; can it now be removed also, or is the new napi_struct implementation now EXPERIMENTAL ?) - remove comment about the now-deleted NAPI_HOWTO.txt file - clean up typos in Tulip NAPI & Interrupt Mitigation Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Matt LaPlante 提交于
Most of these fixes were already submitted for old kernel versions, and were approved, but for some reason they never made it into the releases. Because this is a consolidation of a couple old missed patches, it touches both Kconfigs and documentation texts. Signed-off-by: NMatt LaPlante <kernel1@cyberdogtech.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
- 17 10月, 2007 1 次提交
-
-
由 Stephen Hemminger 提交于
Add a debugfs interface to look at internal ring state. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 16 10月, 2007 1 次提交
-
-
由 Matteo Croce 提交于
New version which uses less locking and drops old API Signed-off-by: NMatteo Croce <technoboy85@gmail.com> Signed-off-by: NEugene Konev <ejka@imfi.kspu.ru> Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 11 10月, 2007 5 次提交
-
-
由 David S. Miller 提交于
With cleanup suggestions and bugs spotted by Stephen Hemminger, Ingo Oeser, Matheos Worku, and Oliver Hartkopp. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Markus Brunner 提交于
Hi, this are the changes to the smc911x driver, which were necessary to get it running on the Magic Panel R2 (smsc9115). It is a SH3-DSP based board. The other patches are available on the linuxsh-dev mailinglist. http://marc.info/?l=linuxsh-dev&r=1&b=200708&w=2 It was necessary to set the irq sense to low level. Therefor the SMC_IRQ_SENSE define was added. How are the chances for inclusion in 2.6.24? Signed-off by: Markus Brunner <super.firetwister@gmail.com> Signed-off by: Mark Jonas <toertel@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Magnus Damm 提交于
Hook up the 93cx6 eeprom code to the ax88796 driver and modify the ax88796 driver to read out the mac address from the eeprom. We need this for the ax88796 on certain SuperH boards. The pin configuration used to connect the eeprom to the ax88796 on these boards is the same as pointed out by the ax88796 datasheet, so we can probably reuse this code for multiple platforms in the future. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Maciej W. Rozycki 提交于
A driver model and phylib update. It includes the following changes: 1. Removal of unused module options. 2. Phylib support and the resulting removal of generic bits for handling the PHY. 3. Proper reserving of device resources and using ioremap()ped handles to access MAC registers rather than platform-specific macros. 4. Handling of the device using the driver model. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Nathanael Nerode 提交于
Stop building and configuring driver for Digi RightSwitch, which was never actually sold to anyone, and remove it from MAINTAINERS. In response to an investigation into the firmware of the "Digi Rightswitch" driver, Andres Salomon discovered: > > Dear Andres: > > After further research, we found that this product was killed in place > and never reached the market. We would like to request that this not be > included. Since the product never reached market, clearly nobody is using this orphaned driver. Signed-off-by: NNathanael Nerode <neroden@gcc.gnu.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-