Currently the INTC2 code contains a fixed IRQ table that it
iterates through to set the handler type, we move this in to
the CPU subtype setup code instead and allow for submitting
the table that way.

This drops the ST40 tables, as nothing has been happening
with those processors, while converting the only existing
users to use the new table directly (SH7760 and SH7780).
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

handle_irq_name() and set_irq_chip_and_handler() disappeared,
update for desc->name and set_irq_chip_and_handler_name() use.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Some of these were dropped in the header directory rework, add
the few missing ones back in.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

With the recent change ripping out interrupt_table, explicit
padding of the table was missing, causing bad things to happen
when manually inserting handlers in to the table. This problem
particularly showed up in relation to do_fpu_state_restore()
which was inserted quite deeply in to the table and ended up
scribbling over a slab object.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Now with the ide.h mess sorted out, most of these boards
don't need their own directory. Move the headers out, and
update the driver paths.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The driver that these were using never made it in to
drivers/ide, so kill off the rest of the cruft. These
will have to be reworked for board-specific platform
devices through libata when they're added back through
the setup code.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This splits out some of the previous show_stack() implementation which
was mostly doing the show_trace() work without actually dumping any of
the stack contents. This now gets split in to two sections, where we
do the fetching of the stack pointer and subsequent stack dumping in
show_stack(), while moving the call trace in to show_trace().
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

* 'ubuntu-updates' of master.kernel.org:/pub/scm/linux/kernel/git/bcollins/ubuntu-2.6:
  [pci_ids] Add Quicknet XJ vendor/device ID's.
  [valkyriefb] Ifdef for when CONFIG_NVRAM isn't enabled.
  [platinumfb] Ifdef for when CONFIG_NVRAM isn't enabled.
  [igafb] Add pci dev table for module auto loading.
  [controlfb] Ifdef for when CONFIG_NVRAM isn't enabled.
  [hid-core] TurboX Keyboard needs NOGET quirk.
  [ixj] Add pci dev table for module auto loading.
  [initio] Add pci dev table for module auto loading.
  [fdomain] Add pci dev table for module auto loading.
  [BusLogic] Add pci dev table for auto module loading.
  [mv643xx] Add pci device table for auto module loading.
  [alim7101] Add pci dev table for auto module loading.

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/hwmon-2.6:
  hwmon: Fix debug messages in w83781d
  hwmon: Let w83781d and lm78 load again
  w83627ehf: Fix the detection of fan5
  k8temp: Documentation update
  smsc47m1: List the SMSC LPC47M112 as supported
  hwmon: Fix documentation typos
  adm9240: Update Grant Coady's email address
  w83791d: Fix unchecked return status

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/aoe-2.6:
  aoe: fix sysfs_create_file warnings
  aoe: revert printk macros
  aoe: update driver version
  aoe: remove sysfs comment
  aoe: use bio->bi_idx
  aoe: module parameter for device timeout
  aoe: zero copy write 2 of 2
  aoe: improve retransmission heuristics
  aoe: jumbo frame support 2 of 2
  aoe: clean up printks via macros
  aoe: jumbo frame support 1 of 2
  aoe: zero copy write 1 of 2
  aoe: remove unused NARGS enum
  aoe: update copyright date
  aoe: eliminate isbusy message

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (22 commits)
  PCI Hotplug: move pci_hotplug.h to include/linux/
  change pci hotplug subsystem maintainer to Kristen
  PCI: optionally sort device lists breadth-first
  cpcihp_generic: prevent loading without "bridge" parameter
  pci: Additional search functions
  PCI: quirks: switch quirks code offender to use pci_get API
  PCI: Update MSI-HOWTO.txt according to pci_msi_supported()
  PCI: Improve pci_msi_supported() comments
  PCI hotplug: ioremap balanced with iounmap
  shpchp: remove unnecessary cmd_busy member from struct controller
  shpchp: fix command completion check
  pci: Stamp out pci_find_* usage in fakephp
  PCI: fix pcie_portdrv_restore_config undefined without CONFIG_PM error
  Fix DMA resource allocation in ACPIPnP
  PCI: Turn pci_fixup_video into generic for embedded VGA
  PCI: add ICH7/8 ACPI/GPIO io resource quirks
  PCI: pcie-check-and-return-bus_register-errors fix
  PCI: VIA IRQ quirk behaviour change
  pciehp: Remove unnecessary check in pciehp_ctrl.c
  pciehp - add missing locking
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  driver core: kmalloc() failure check in driver_probe_device
  Driver core: bus: remove indentation level
  Driver core: Don't ignore error returns from probing
  Driver core: Don't leak 'old_class_name' in drivers/base/core.c::device_rename()
  driver core fixes: sysfs_create_group() retval in topology.c
  driver core fixes: device_create_file() retval check in dmapool.c
  driver core fixes: device_add() cleanup on error
  driver core fixes: bus_add_device() cleanup on error
  driver core fixes: bus_add_attrs() retval check
  driver core fixes: sysfs_create_link() retval check in class.c
  sysfs: update obsolete comment in sysfs_update_file
  sysfs: remove duplicated dput in sysfs_update_file
  HOWTO: bug report addition
  Fix dev_printk() is now GPL-only
  Driver core: plug device probe memory leak
  Documentation: feature-removal-schedule typo

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] update default configuration
  [S390] cio: update documentation.
  [S390] dasd: clean up timer.
  [S390] Fix pte type checking.
  [S390] monwriter find header logic.
  [S390] cio: sch_no -> schid.sch_no conversion.
  [S390] Wire up epoll_pwait syscall.
  [S390] cio: invalid device operational notification
  [S390] fix vmlinux link when CONFIG_SYSIPC=n

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Count resched interrupts
  [IA64] remove unused acpi_kbd_controller_present, acpi_legacy_devices
  [IA64] update sn2_defconfig
  [IA64] reformat pal.S to fit in 80 columns, fix typos
  [IA64] remove unused PAL_CALL_IC_OFF
  [IA64] - Allow IPIs in timer loop
  [IA64] move ioremap/ioremap_nocache under __KERNEL__
  [IA64] perfmon fix for global IRQ fix

Fix debug messages in w83781d at detection time. We can't use dev_dbg()
on an i2c client's device before calling i2c_attach_client() on that
client.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Let the w83781d and lm78 hardware monitoring drivers load even when
no chip was detected at the ISA address. There can still be supported
chips connected to an I2C bus or SMBus.

This fixes bug #7293.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the detection of fan5 and preserve the bit between the
register writes, because the bit is write only.
Signed-off-by: NRudolf Marek <r.marek@assembler.cz>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Update the documentation for the k8temp driver.
Signed-off-by: NRudolf Marek <r.marek@assembler.cz>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The SMSC LPC47M112 Super-I/O chip appears to be compatible with the
LPC47M10x and LPC47M13x as far as hardware monitoring is concerned.
The device ID is even the same, so it's really only a documentation
update.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix typos in hardware monitoring documentation.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Replace a bouncing email that I cannot recover from Mr Google.
Signed-off-by: NGrant Coady <gcoady.lk@gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Replace all unchecked calls to device_create_file with a single group
declaration, and one call to sysfs_create_group, and check that one
return status. Also remove the files on device detach.
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Signed-off by: Charles Spirakis <bezaur@gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Moved the attributes into a group, making the compiler be quiet about
ignoring the return value of the file create calls.  This also also
fixed a bug when removing the files, which were not symlinks.

Cc: "Ed L. Cashin" <ecashin@coraid.com>
Cc: Alan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch addresses the concern that the aoe driver should
not introduce unecessary conventions that must be learned by
the reader.  It reverts patch 6.
Signed-off-by: N"Ed L. Cashin" <ecashin@coraid.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Update aoe driver version number to 32.
Signed-off-by: N"Ed L. Cashin" <ecashin@coraid.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove unecessary comment.
Signed-off-by: N"Ed L. Cashin" <ecashin@coraid.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Instead of starting with bio->bi_io_vec, use the offset in bio->bi_idx.
Signed-off-by: N"Ed L. Cashin" <ecashin@coraid.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The aoe_deadsecs module parameter sets the number of seconds that
elapse before a nonresponsive AoE device is marked as dead.

This is runtime settable in sysfs or settable with a module load or
kernel boot parameter.
Signed-off-by: N"Ed L. Cashin" <ecashin@coraid.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Avoid memory copy on writes.
(This patch follows patch 4.)
Signed-off-by: N"Ed L. Cashin" <ecashin@coraid.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add a dynamic minimum timer for better retransmission behavior.
Signed-off-by: N"Ed L. Cashin" <ecashin@coraid.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add support for jumbo ethernet frames.
(This patch follows patch 5.)
Signed-off-by: N"Ed L. Cashin" <ecashin@coraid.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use simple macros to clean up the printks.
(This patch is reverted by the 14th patch to follow.)
Signed-off-by: N"Ed L. Cashin" <ecashin@coraid.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add support for jumbo ethernet frames.
(This patch depends on patch 7 to follow.)
Signed-off-by: N"Ed L. Cashin" <ecashin@coraid.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Avoid memory copy on writes.
(This patch depends on fixes in patch 9 to follow.)

Although skb->len should not be set when working with linear skbuffs,
the skb->tail pointer maintained by skb_put/skb_trim is not relevant
to what happens when the skb_fill_page_desc function is called.  This
issue was raised without comment in linux-kernel and netdev earlier
this month:

  http://thread.gmane.org/gmane.linux.kernel/446474/
  http://thread.gmane.org/gmane.linux.network/45444/

So until there is something analogous to skb_put that works for
zero-copy write skbuffs, we will do what the other callers of
skb_fill_page_desc are doing.
Signed-off-by: N"Ed L. Cashin" <ecashin@coraid.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The NARGS enum is left over from older code versions.
Signed-off-by: N"Ed L. Cashin" <ecashin@coraid.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Update the copyright year to 2006.
Signed-off-by: N"Ed L. Cashin" <ecashin@coraid.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This message doesn't help users because the circumstance isn't problematic.
Signed-off-by: N"Ed L. Cashin" <ecashin@coraid.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

driver_probe_device() is missing kmalloc() failure check.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Before potentially fixing up these functions, this cosmetic change
reduces the indentation level to make the code easier to read and
maintain.

No functional changes at all.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as797) fixes device_add() in the driver core.  It needs to
pay attention when the driver for a new device reports an error.

At the same time, since bus_remove_device() undoes the effects of both
bus_add_device() and bus_attach_device(), it needs to check whether
the bus_attach_device step failed.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>