sh: Cleanup board header directories.

Now with the ide.h mess sorted out, most of these boards
don't need their own directory. Move the headers out, and
update the driver paths.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

arch/sh/boards/hp6xx/hp6xx_apm.c

@@ -14,7 +14,7 @@
 #include <asm/io.h>
 #include <asm/apm.h>
 #include <asm/adc.h>
-#include <asm/hp6xx/hp6xx.h>
+#include <asm/hp6xx.h>
 
 #define SH7709_PGDR			0xa400012c
 

arch/sh/boards/hp6xx/pm.c

@@ -12,7 +12,7 @@
 #include <linux/time.h>
 #include <asm/io.h>
 #include <asm/hd64461.h>
-#include <asm/hp6xx/hp6xx.h>
+#include <asm/hp6xx.h>
 #include <asm/cpu/dac.h>
 #include <asm/pm.h>
 

arch/sh/boards/hp6xx/setup.c

@@ -13,7 +13,7 @@
 #include <asm/hd64461.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hp6xx/hp6xx.h>
+#include <asm/hp6xx.h>
 #include <asm/cpu/dac.h>
 
 #define	SCPCR	0xa4000116

arch/sh/boards/renesas/hs7751rvoip/io.c

@@ -15,7 +15,7 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <asm/io.h>
-#include <asm/hs7751rvoip/hs7751rvoip.h>
+#include <asm/hs7751rvoip.h>
 #include <asm/addrspace.h>
 
 extern void *area6_io8_base;	/* Area 6 8bit I/O Base address */

arch/sh/boards/renesas/hs7751rvoip/irq.c

@@ -14,7 +14,7 @@
 #include <linux/irq.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hs7751rvoip/hs7751rvoip.h>
+#include <asm/hs7751rvoip.h>
 
 static int mask_pos[] = {8, 9, 10, 11, 12, 13, 0, 1, 2, 3, 4, 5, 6, 7};
 

arch/sh/boards/renesas/hs7751rvoip/setup.c

@@ -10,15 +10,10 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/hdreg.h>
-#include <linux/ide.h>
 #include <linux/pm.h>
+#include <asm/hs7751rvoip.h>
 #include <asm/io.h>
-#include <asm/hs7751rvoip/hs7751rvoip.h>
 #include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/irq.h>
 
 static void __init hs7751rvoip_init_irq(void)
 {

arch/sh/boards/renesas/r7780rp/io.c

@@ -11,7 +11,7 @@
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <asm/r7780rp/r7780rp.h>
+#include <asm/r7780rp.h>
 #include <asm/addrspace.h>
 #include <asm/io.h>
 

arch/sh/boards/renesas/r7780rp/irq.c

@@ -10,7 +10,8 @@
  */
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <asm/io.h>
+#include <linux/io.h>
+#include <asm/r7780rp.h>
 
 #ifdef CONFIG_SH_R7780MP
 static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0};

arch/sh/boards/renesas/r7780rp/setup.c

@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <asm/machvec.h>
-#include <asm/r7780rp/r7780rp.h>
+#include <asm/r7780rp.h>
 #include <asm/clock.h>
 #include <asm/io.h>
 

arch/sh/boards/renesas/rts7751r2d/io.c

@@ -11,8 +11,8 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/pci.h>
-#include <asm/rts7751r2d/rts7751r2d.h>
-#include <asm/io.h>
+#include <linux/io.h>
+#include <asm/rts7751r2d.h>
 #include <asm/addrspace.h>
 
 /*

arch/sh/boards/renesas/rts7751r2d/irq.c

@@ -8,12 +8,10 @@
  * Modified for RTS7751R2D by
  * Atom Create Engineering Co., Ltd. 2002.
  */
-
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/rts7751r2d/rts7751r2d.h>
+#include <linux/io.h>
+#include <asm/rts7751r2d.h>
 
 #if defined(CONFIG_RTS7751R2D_REV11)
 static int mask_pos[] = {11, 9, 8, 12, 10, 6, 5, 4, 7, 14, 13, 0, 0, 0, 0};

arch/sh/boards/renesas/rts7751r2d/led.c

@@ -8,13 +8,9 @@
  *
  * This file contains Renesas Technology Sales RTS7751R2D specific LED code.
  */
-
-#include <asm/io.h>
-#include <asm/rts7751r2d/rts7751r2d.h>
-
-#ifdef CONFIG_HEARTBEAT
-
+#include <linux/io.h>
 #include <linux/sched.h>
+#include <asm/rts7751r2d.h>
 
 /* Cycle the LED's in the clasic Knightriger/Sun pattern */
 void heartbeat_rts7751r2d(void)
@@ -46,10 +42,3 @@ void heartbeat_rts7751r2d(void)
 	else
 		bit--;
 }
-#endif /* CONFIG_HEARTBEAT */
-
-void rts7751r2d_led(unsigned short value)
-{
-	ctrl_outw(value, PA_OUTPORT);
-}
-

arch/sh/boards/renesas/rts7751r2d/setup.c

@@ -12,9 +12,9 @@
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 #include <linux/pm.h>
-#include <asm/io.h>
 #include <asm/machvec.h>
 #include <asm/mach/rts7751r2d.h>
+#include <asm/io.h>
 #include <asm/voyagergx.h>
 
 extern void heartbeat_rts7751r2d(void);

arch/sh/boards/shmin/setup.c

@@ -7,7 +7,7 @@
  */
 #include <linux/init.h>
 #include <asm/machvec.h>
-#include <asm/shmin/shmin.h>
+#include <asm/shmin.h>
 #include <asm/clock.h>
 #include <asm/irq.h>
 #include <asm/io.h>

arch/sh/cchips/voyagergx/irq.c

@@ -17,29 +17,18 @@
 
     Copyright 2003 (c) Lineo uSolutions,Inc.
 */
-/* -------------------------------------------------------------------- */
-
-#undef DEBUG
-
-#include <linux/sched.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
+#include <linux/io.h>
 #include <asm/voyagergx.h>
+#include <asm/rts7751r2d.h>
 
 static void disable_voyagergx_irq(unsigned int irq)
 {
 	unsigned long val;
 	unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE);
 
-    	pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask);
+    	pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask);
         val = inl(VOYAGER_INT_MASK);
         val &= ~mask;
         outl(val, VOYAGER_INT_MASK);
@@ -50,7 +39,7 @@ static void enable_voyagergx_irq(unsigned int irq)
         unsigned long val;
         unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE);
 
-        pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask);
+        pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask);
         val = inl(VOYAGER_INT_MASK);
         val |= mask;
         outl(val, VOYAGER_INT_MASK);
@@ -137,7 +126,7 @@ int voyagergx_irq_demux(int irq)
 		} else {
 			printk("Unexpected IRQ irq = %d status = 0x%08lx\n", irq, val);
 		}
-		pr_debug("voyagergx_irq_demux %d \n", i);
+		pr_debug("voyagergx_irq_demux %ld\n", i);
 #else
 		for (bit = 1, i = 0 ; i < VOYAGER_IRQ_NUM ; bit <<= 1, i++)
 			if (val & bit)
@@ -185,4 +174,3 @@ void __init setup_voyagergx_irq(void)
 
 	setup_irq(IRQ_VOYAGER, &irq0);
 }
-

arch/sh/drivers/pci/ops-r7780rp.c

@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
-#include <asm/r7780rp/r7780rp.h>
+#include <asm/r7780rp.h>
 #include <asm/io.h>
 #include "pci-sh4.h"
 

arch/sh/drivers/pci/ops-rts7751r2d.c

@@ -10,28 +10,24 @@
  *
  * PCI initialization for the Renesas SH7751R RTS7751R2D board
  */
-
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/init.h>
-#include <linux/delay.h>
 #include <linux/pci.h>
-#include <linux/module.h>
-#include <asm/rts7751r2d/rts7751r2d.h>
-#include <asm/io.h>
+#include <linux/io.h>
+#include <asm/rts7751r2d.h>
 #include "pci-sh4.h"
 
+static u8 rts7751r2d_irq_tab[] __initdata = {
+	IRQ_PCISLOT1,
+	IRQ_PCISLOT2,
+	IRQ_PCMCIA,
+	IRQ_PCIETH,
+};
+
 int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
 {
-        switch (slot) {
-	case 0: return IRQ_PCISLOT1;	/* PCI Extend slot #1 */
-	case 1: return IRQ_PCISLOT2;	/* PCI Extend slot #2 */
-	case 2: return IRQ_PCMCIA;	/* PCI Cardbus Bridge */
-	case 3: return IRQ_PCIETH;	/* Realtek Ethernet controller */
-	default:
-		printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
-		return -1;
-	}
+	return rts7751r2d_irq_tab[slot];
 }
 
 static struct resource sh7751_io_resource = {

drivers/input/touchscreen/hp680_ts_input.c

@@ -6,7 +6,7 @@
 #include <asm/io.h>
 #include <asm/delay.h>
 #include <asm/adc.h>
-#include <asm/hp6xx/hp6xx.h>
+#include <asm/hp6xx.h>
 
 #define MODNAME "hp680_ts_input"
 

drivers/video/hitfb.c

@@ -29,7 +29,6 @@
 #include <asm/io.h>
 #include <asm/hd64461.h>
 #include <asm/cpu/dac.h>
-#include <asm/hp6xx/hp6xx.h>
 
 #define	WIDTH 640
 

include/asm-sh/edosk7705/io.h

-/*
- * include/asm-sh/edosk7705/io.h
- *
- * Modified version of io_se.h for the EDOSK7705 specific functions.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * IO functions for an Hitachi EDOSK7705 development board
- */
-
-#ifndef __ASM_SH_EDOSK7705_IO_H
-#define __ASM_SH_EDOSK7705_IO_H
-
-#include <asm/io_generic.h>
-
-extern unsigned char sh_edosk7705_inb(unsigned long port);
-extern unsigned int sh_edosk7705_inl(unsigned long port);
-
-extern void sh_edosk7705_outb(unsigned char value, unsigned long port);
-extern void sh_edosk7705_outl(unsigned int value, unsigned long port);
-
-extern void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count);
-extern void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count);
-extern void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count);
-extern void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count);
-
-extern unsigned long sh_edosk7705_isa_port2addr(unsigned long offset);
-
-#endif /* __ASM_SH_EDOSK7705_IO_H */

include/asm-sh/hp6xx/hp6xx.h

-#ifndef __ASM_SH_HP6XX_H
-#define __ASM_SH_HP6XX_H
-
-/*
- * Copyright (C) 2003, 2004, 2005  Andriy Skulysh
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#define HP680_BTN_IRQ		IRQ0_IRQ
-#define HP680_TS_IRQ		IRQ3_IRQ
-#define HP680_HD64461_IRQ	IRQ4_IRQ
-
-#define DAC_LCD_BRIGHTNESS	0
-#define DAC_SPEAKER_VOLUME	1
-
-#define PGDR_OPENED		0x01
-#define PGDR_MAIN_BATTERY_OUT	0x04
-#define PGDR_PLAY_BUTTON	0x08
-#define PGDR_REWIND_BUTTON	0x10
-#define PGDR_RECORD_BUTTON	0x20
-
-#define PHDR_TS_PEN_DOWN	0x08
-
-#define PJDR_LED_BLINK		0x02
-
-#define PKDR_LED_GREEN		0x10
-
-#define SCPDR_TS_SCAN_ENABLE	0x20
-#define SCPDR_TS_SCAN_Y		0x02
-#define SCPDR_TS_SCAN_X		0x01
-
-#define SCPCR_TS_ENABLE		0x405
-#define SCPCR_TS_MASK		0xc0f
-
-#define ADC_CHANNEL_TS_Y	1
-#define ADC_CHANNEL_TS_X	2
-#define ADC_CHANNEL_BATTERY	3
-#define ADC_CHANNEL_BACKUP	4
-#define ADC_CHANNEL_CHARGE	5
-
-#define HD64461_GPADR_SPEAKER	0x01
-#define HD64461_GPADR_PCMCIA0	(0x02|0x08)
-
-#define HD64461_GPBDR_LCDOFF	0x01
-#define HD64461_GPBDR_LCD_CONTRAST_MASK	0x78
-#define HD64461_GPBDR_LED_RED	0x80
-
-#include <asm/hd64461.h>
-#include <asm/io.h>
-
-#define PJDR	0xa4000130
-#define PKDR	0xa4000132
-
-static inline void hp6xx_led_red(int on)
-{
-	u16 v16;
-	v16 = ctrl_inw(CONFIG_HD64461_IOBASE + HD64461_GPBDR - 0x10000);
-	if (on)
-	    ctrl_outw(v16 & (~HD64461_GPBDR_LED_RED), CONFIG_HD64461_IOBASE + HD64461_GPBDR - 0x10000);
-	else
-	    ctrl_outw(v16 | HD64461_GPBDR_LED_RED, CONFIG_HD64461_IOBASE + HD64461_GPBDR - 0x10000);
-}
-
-static inline void hp6xx_led_green(int on)
-{
-	u8 v8;
-
-	v8 = ctrl_inb(PKDR);
-	if (on)
-	    ctrl_outb(v8 & (~PKDR_LED_GREEN), PKDR);
-	else
-	    ctrl_outb(v8 | PKDR_LED_GREEN, PKDR);
-}
-
-
-#endif /* __ASM_SH_HP6XX_H */

include/asm-sh/hp6xx/io.h

-#ifndef __ASM_SH_HP6XX_IO_H
-#define __ASM_SH_HP6XX_IO_H
-
-/*
- * Nothing special here.. just use the generic cchip io routines.
- */
-#include <asm/hd64461.h>
-
-#endif /* __ASM_SH_HP6XX_IO_H */
-

include/asm-sh/hs7751rvoip/hs7751rvoip.h

-#ifndef __ASM_SH_RENESAS_HS7751RVOIP_H
-#define __ASM_SH_RENESAS_HS7751RVOIP_H
-
-/*
- * linux/include/asm-sh/hs7751rvoip/hs7751rvoip.h
- *
- * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
- *
- * Renesas Technology Sales HS7751RVoIP support
- */
-
-/* Box specific addresses.  */
-
-#define PA_BCR		0xa4000000	/* FPGA */
-#define PA_SLICCNTR1	0xa4000006	/* SLIC PIO Control 1 */
-#define PA_SLICCNTR2	0xa4000008	/* SLIC PIO Control 2 */
-#define PA_DMACNTR	0xa400000a	/* USB DMA Control */
-#define PA_INPORTR	0xa400000c	/* Input Port Register */
-#define PA_OUTPORTR	0xa400000e	/* Output Port Reguster */
-#define PA_VERREG	0xa4000014	/* FPGA Version Register */
-
-#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
-
-#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
-#define IRLCNTR2	(PA_BCR + 2)	/* Interrupt Control Register2 */
-#define IRLCNTR3	(PA_BCR + 4)	/* Interrupt Control Register3 */
-#define IRLCNTR4	(PA_BCR + 16)	/* Interrupt Control Register4 */
-#define IRLCNTR5	(PA_BCR + 18)	/* Interrupt Control Register5 */
-
-#define IRQ_PCIETH	6		/* PCI Ethernet IRQ */
-#define IRQ_PCIHUB	7		/* PCI Ethernet Hub IRQ */
-#define IRQ_USBCOM	8		/* USB Comunication IRQ */
-#define IRQ_USBCON	9		/* USB Connect IRQ */
-#define IRQ_USBDMA	10		/* USB DMA IRQ */
-#define IRQ_CFCARD	11		/* CF Card IRQ */
-#define IRQ_PCMCIA	12		/* PCMCIA IRQ */
-#define IRQ_PCISLOT	13		/* PCI Slot #1 IRQ */
-#define IRQ_ONHOOK1	0		/* ON HOOK1 IRQ */
-#define IRQ_OFFHOOK1	1		/* OFF HOOK1 IRQ */
-#define IRQ_ONHOOK2	2		/* ON HOOK2 IRQ */
-#define IRQ_OFFHOOK2	3		/* OFF HOOK2 IRQ */
-#define	IRQ_RINGING	4		/* Ringing IRQ */
-#define	IRQ_CODEC	5		/* CODEC IRQ */
-
-#define __IO_PREFIX	hs7751rvoip
-#include <asm/io_generic.h>
-
-/* arch/sh/boards/renesas/hs7751rvoip/irq.c */
-void init_hs7751rvoip_IRQ(void);
-
-/* arch/sh/boards/renesas/hs7751rvoip/io.c */
-void *hs7751rvoip_ioremap(unsigned long, unsigned long);
-
-#endif  /* __ASM_SH_RENESAS_HS7751RVOIP */

include/asm-sh/r7780rp/r7780rp.h

-#ifndef __ASM_SH_RENESAS_R7780RP_H
-#define __ASM_SH_RENESAS_R7780RP_H
-
-/*
- * linux/include/asm-sh/r7780rp.h
- *
- * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
- *
- * Renesas Solutions Highlander R7780RP support
- */
-
-/* Box specific addresses.  */
-#if defined(CONFIG_SH_R7780MP)
-#define PA_BCR          0xa4000000      /* FPGA */
-#define PA_IRLMSK       (PA_BCR+0x0000) /* Interrupt Mask control */
-#define PA_IRLMON       (PA_BCR+0x0002) /* Interrupt Status control */
-#define PA_IRLPRI1      (PA_BCR+0x0004) /* Interrupt Priorty 1 */
-#define PA_IRLPRI2      (PA_BCR+0x0006) /* Interrupt Priorty 2 */
-#define PA_IRLPRI3      (PA_BCR+0x0008) /* Interrupt Priorty 3 */
-#define PA_IRLPRI4      (PA_BCR+0x000a) /* Interrupt Priorty 4 */
-#define PA_RSTCTL       (PA_BCR+0x000c) /* Reset Control */
-#define PA_PCIBD        (PA_BCR+0x000e) /* PCI Board detect control */
-#define PA_PCICD        (PA_BCR+0x0010) /* PCI Conector detect control */
-#define PA_EXTGIO       (PA_BCR+0x0016) /* Extension GPIO Control */
-#define PA_IVDRMON      (PA_BCR+0x0018) /* iVDR Moniter control */
-#define PA_IVDRCTL      (PA_BCR+0x001a) /* iVDR control */
-#define PA_OBLED        (PA_BCR+0x001c) /* On Board LED control */
-#define PA_OBSW         (PA_BCR+0x001e) /* On Board Switch control */
-#define PA_AUDIOSEL     (PA_BCR+0x0020) /* Sound Interface Select control */
-#define PA_EXTPLR       (PA_BCR+0x001e) /* Extention Pin Polarity control */
-#define PA_TPCTL        (PA_BCR+0x0100) /* Touch Panel Access control */
-#define PA_TPDCKCTL     (PA_BCR+0x0102) /* Touch Panel Access data control */
-#define PA_TPCTLCLR     (PA_BCR+0x0104) /* Touch Panel Access control */
-#define PA_TPXPOS       (PA_BCR+0x0106) /* Touch Panel X position control */
-#define PA_TPYPOS       (PA_BCR+0x0108) /* Touch Panel Y position control */
-#define PA_DBSW         (PA_BCR+0x0200) /* Debug Board Switch control */
-#define PA_CFCTL        (PA_BCR+0x0300) /* CF Timing control */
-#define PA_CFPOW        (PA_BCR+0x0302) /* CF Power control */
-#define PA_CFCDINTCLR   (PA_BCR+0x0304) /* CF Insert Interrupt clear */
-#define PA_SCSMR0       (PA_BCR+0x0400) /* SCIF0 Serial mode control */
-#define PA_SCBRR0       (PA_BCR+0x0404) /* SCIF0 Bit rate control */
-#define PA_SCSCR0       (PA_BCR+0x0408) /* SCIF0 Serial control */
-#define PA_SCFTDR0      (PA_BCR+0x040c) /* SCIF0 Send FIFO control */
-#define PA_SCFSR0       (PA_BCR+0x0410) /* SCIF0 Serial status control */
-#define PA_SCFRDR0      (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */
-#define PA_SCFCR0       (PA_BCR+0x0418) /* SCIF0 FIFO control */
-#define PA_SCTFDR0      (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */
-#define PA_SCRFDR0      (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */
-#define PA_SCSPTR0      (PA_BCR+0x0424) /* SCIF0 Serial Port control */
-#define PA_SCLSR0       (PA_BCR+0x0428) /* SCIF0 Line Status control */
-#define PA_SCRER0       (PA_BCR+0x042c) /* SCIF0 Serial Error control */
-#define PA_SCSMR1       (PA_BCR+0x0500) /* SCIF1 Serial mode control */
-#define PA_SCBRR1       (PA_BCR+0x0504) /* SCIF1 Bit rate control */
-#define PA_SCSCR1       (PA_BCR+0x0508) /* SCIF1 Serial control */
-#define PA_SCFTDR1      (PA_BCR+0x050c) /* SCIF1 Send FIFO control */
-#define PA_SCFSR1       (PA_BCR+0x0510) /* SCIF1 Serial status control */
-#define PA_SCFRDR1      (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */
-#define PA_SCFCR1       (PA_BCR+0x0518) /* SCIF1 FIFO control */
-#define PA_SCTFDR1      (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */
-#define PA_SCRFDR1      (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */
-#define PA_SCSPTR1      (PA_BCR+0x0524) /* SCIF1 Serial Port control */
-#define PA_SCLSR1       (PA_BCR+0x0528) /* SCIF1 Line Status control */
-#define PA_SCRER1       (PA_BCR+0x052c) /* SCIF1 Serial Error control */
-#define PA_ICCR         (PA_BCR+0x0600) /* Serial control */
-#define PA_SAR          (PA_BCR+0x0602) /* Serial Slave control */
-#define PA_MDR          (PA_BCR+0x0604) /* Serial Mode control */
-#define PA_ADR1         (PA_BCR+0x0606) /* Serial Address1 control */
-#define PA_DAR1         (PA_BCR+0x0646) /* Serial Data1 control */
-#define PA_VERREG       (PA_BCR+0x0700) /* FPGA Version Register */
-#define PA_POFF         (PA_BCR+0x0800) /* System Power Off control */
-#define PA_PMR          (PA_BCR+0x0900) /*  */
-
-#define PA_AX88796L     0xa4100400      /* AX88796L Area */
-#define PA_SC1602BSLB   0xa6000000      /* SC1602BSLB Area */
-#define PA_AREA5_IO     0xb4000000      /* Area 5 IO Memory */
-#define PA_AREA6_IO     0xb8000000      /* Area 6 IO Memory */
-#define PA_IDE_OFFSET   0x1f0           /* CF IDE Offset */
-#define AX88796L_IO_BASE        0x1000  /* AX88796L IO Base Address */
-
-#define IRLCNTR1        (PA_BCR + 0)    /* Interrupt Control Register1 */
-
-#define IRQ_PCISLOT1    65              /* PCI Slot #1 IRQ */
-#define IRQ_PCISLOT2    66              /* PCI Slot #2 IRQ */
-#define IRQ_PCISLOT3    67              /* PCI Slot #3 IRQ */
-#define IRQ_PCISLOT4    68              /* PCI Slot #4 IRQ */
-#define IRQ_CFCARD      1               /* CF Card IRQ */
-// #define IRQ_CFINST   0               /* CF Card Insert IRQ */
-#define IRQ_TP          2               /* Touch Panel IRQ */
-#define IRQ_SCI1        3               /* SCI1 IRQ */
-#define IRQ_SCI0        4               /* SCI0 IRQ */
-#define IRQ_2SERIAL     5               /* Serial IRQ */
-#define IRQ_RTC         6               /* RTC A / B IRQ */
-#define IRQ_EXTENTION6  7               /* EXT6n IRQ */
-#define IRQ_EXTENTION5  8               /* EXT5n IRQ */
-#define IRQ_EXTENTION4  9               /* EXT4n IRQ */
-#define IRQ_EXTENTION2  10              /* EXT2n IRQ */
-#define IRQ_EXTENTION1  11              /* EXT1n IRQ */
-#define IRQ_ONETH       13              /* On board Ethernet IRQ */
-#define IRQ_PSW         14              /* Push Switch IRQ */
-
-#else /* R7780RP */
-
-#define PA_BCR		0xa5000000	/* FPGA */
-#define	PA_IRLMSK	(PA_BCR+0x0000)	/* Interrupt Mask control */
-#define PA_IRLMON	(PA_BCR+0x0002)	/* Interrupt Status control */
-#define	PA_SDPOW	(PA_BCR+0x0004)	/* SD Power control */
-#define	PA_RSTCTL	(PA_BCR+0x0006)	/* Device Reset control */
-#define	PA_PCIBD	(PA_BCR+0x0008)	/* PCI Board detect control */
-#define	PA_PCICD	(PA_BCR+0x000a)	/* PCI Conector detect control */
-#define	PA_ZIGIO1	(PA_BCR+0x000c)	/* Zigbee IO control 1 */
-#define	PA_ZIGIO2	(PA_BCR+0x000e)	/* Zigbee IO control 2 */
-#define	PA_ZIGIO3	(PA_BCR+0x0010)	/* Zigbee IO control 3 */
-#define	PA_ZIGIO4	(PA_BCR+0x0012)	/* Zigbee IO control 4 */
-#define	PA_IVDRMON	(PA_BCR+0x0014)	/* iVDR Moniter control */
-#define	PA_IVDRCTL	(PA_BCR+0x0016)	/* iVDR control */
-#define PA_OBLED	(PA_BCR+0x0018)	/* On Board LED control */
-#define PA_OBSW		(PA_BCR+0x001a)	/* On Board Switch control */
-#define PA_AUDIOSEL	(PA_BCR+0x001c)	/* Sound Interface Select control */
-#define PA_EXTPLR	(PA_BCR+0x001e)	/* Extention Pin Polarity control */
-#define PA_TPCTL	(PA_BCR+0x0100)	/* Touch Panel Access control */
-#define PA_TPDCKCTL	(PA_BCR+0x0102)	/* Touch Panel Access data control */
-#define PA_TPCTLCLR	(PA_BCR+0x0104)	/* Touch Panel Access control */
-#define PA_TPXPOS	(PA_BCR+0x0106)	/* Touch Panel X position control */
-#define PA_TPYPOS	(PA_BCR+0x0108)	/* Touch Panel Y position control */
-#define PA_DBDET	(PA_BCR+0x0200)	/* Debug Board detect control */
-#define PA_DBDISPCTL	(PA_BCR+0x0202)	/* Debug Board Dot timing control */
-#define PA_DBSW		(PA_BCR+0x0204)	/* Debug Board Switch control */
-#define PA_CFCTL	(PA_BCR+0x0300)	/* CF Timing control */
-#define PA_CFPOW	(PA_BCR+0x0302)	/* CF Power control */
-#define PA_CFCDINTCLR	(PA_BCR+0x0304)	/* CF Insert Interrupt clear */
-#define PA_SCSMR	(PA_BCR+0x0400)	/* SCIF Serial mode control */
-#define PA_SCBRR	(PA_BCR+0x0402)	/* SCIF Bit rate control */
-#define PA_SCSCR	(PA_BCR+0x0404)	/* SCIF Serial control */
-#define PA_SCFDTR	(PA_BCR+0x0406)	/* SCIF Send FIFO control */
-#define PA_SCFSR	(PA_BCR+0x0408)	/* SCIF Serial status control */
-#define PA_SCFRDR	(PA_BCR+0x040a)	/* SCIF Receive FIFO control */
-#define PA_SCFCR	(PA_BCR+0x040c)	/* SCIF FIFO control */
-#define PA_SCFDR	(PA_BCR+0x040e)	/* SCIF FIFO data control */
-#define PA_SCLSR	(PA_BCR+0x0412)	/* SCIF Line Status control */
-#define PA_ICCR		(PA_BCR+0x0500)	/* Serial control */
-#define PA_SAR		(PA_BCR+0x0502)	/* Serial Slave control */
-#define PA_MDR		(PA_BCR+0x0504)	/* Serial Mode control */
-#define PA_ADR1		(PA_BCR+0x0506)	/* Serial Address1 control */
-#define PA_DAR1		(PA_BCR+0x0546)	/* Serial Data1 control */
-#define PA_VERREG	(PA_BCR+0x0600)	/* FPGA Version Register */
-
-#define PA_AX88796L	0xa5800400	/* AX88796L Area */
-#define PA_SC1602BSLB	0xa6000000	/* SC1602BSLB Area */
-#define PA_AREA5_IO	0xb4000000	/* Area 5 IO Memory */
-#define PA_AREA6_IO	0xb8000000	/* Area 6 IO Memory */
-#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
-#define AX88796L_IO_BASE	0x1000	/* AX88796L IO Base Address */
-
-#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
-
-#define IRQ_PCISLOT1	0		/* PCI Slot #1 IRQ */
-#define IRQ_PCISLOT2	1		/* PCI Slot #2 IRQ */
-#define IRQ_PCISLOT3	2		/* PCI Slot #3 IRQ */
-#define IRQ_PCISLOT4	3		/* PCI Slot #4 IRQ */
-#define IRQ_CFCARD	4		/* CF Card IRQ */
-#define IRQ_CFINST	5		/* CF Card Insert IRQ */
-#define IRQ_M66596	6		/* M66596 IRQ */
-#define IRQ_SDCARD	7		/* SD Card IRQ */
-#define IRQ_TUCHPANEL	8		/* Touch Panel IRQ */
-#define IRQ_SCI		9		/* SCI IRQ */
-#define IRQ_2SERIAL	10		/* Serial IRQ */
-#define	IRQ_EXTENTION	11		/* EXTn IRQ */
-#define IRQ_ONETH	12		/* On board Ethernet IRQ */
-#define IRQ_PSW		13		/* Push Switch IRQ */
-#define IRQ_ZIGBEE	14		/* Ziggbee IO IRQ */
-
-#endif  /* CONFIG_SH_R7780MP */
-
-#define __IO_PREFIX	r7780rp
-#include <asm/io_generic.h>
-
-#endif  /* __ASM_SH_RENESAS_R7780RP */

include/asm-sh/rts7751r2d/rts7751r2d.h

-#ifndef __ASM_SH_RENESAS_RTS7751R2D_H
-#define __ASM_SH_RENESAS_RTS7751R2D_H
-
-/*
- * linux/include/asm-sh/renesas_rts7751r2d.h
- *
- * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
- *
- * Renesas Technology Sales RTS7751R2D support
- */
-
-/* Box specific addresses.  */
-
-#define PA_BCR		0xa4000000	/* FPGA */
-#define PA_IRLMON	0xa4000002	/* Interrupt Status control */
-#define PA_CFCTL	0xa4000004	/* CF Timing control */
-#define PA_CFPOW	0xa4000006	/* CF Power control */
-#define PA_DISPCTL	0xa4000008	/* Display Timing control */
-#define PA_SDMPOW	0xa400000a	/* SD Power control */
-#define PA_RTCCE	0xa400000c	/* RTC(9701) Enable control */
-#define PA_PCICD	0xa400000e	/* PCI Extention detect control */
-#define PA_VOYAGERRTS	0xa4000020	/* VOYAGER Reset control */
-#if defined(CONFIG_RTS7751R2D_REV11)
-#define PA_AXRST	0xa4000022	/* AX_LAN Reset control */
-#define PA_CFRST	0xa4000024	/* CF Reset control */
-#define	PA_ADMRTS	0xa4000026	/* SD Reset control */
-#define PA_EXTRST	0xa4000028	/* Extention Reset control */
-#define PA_CFCDINTCLR	0xa400002a	/* CF Insert Interrupt clear */
-#else
-#define PA_CFRST	0xa4000022	/* CF Reset control */
-#define	PA_ADMRTS	0xa4000024	/* SD Reset control */
-#define PA_EXTRST	0xa4000026	/* Extention Reset control */
-#define PA_CFCDINTCLR	0xa4000028	/* CF Insert Interrupt clear */
-#define	PA_KEYCTLCLR	0xa400002a	/* Key Interrupt clear */
-#endif
-#define PA_POWOFF	0xa4000030	/* Board Power OFF control */
-#define PA_VERREG	0xa4000032	/* FPGA Version Register */
-#define PA_INPORT	0xa4000034	/* KEY Input Port control */
-#define PA_OUTPORT	0xa4000036	/* LED control */
-#define PA_DMPORT	0xa4000038	/* DM270 Output Port control */
-
-#define PA_AX88796L	0xaa000400	/* AX88796L Area */
-#define PA_VOYAGER	0xab000000	/* VOYAGER GX Area */
-#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
-#define AX88796L_IO_BASE	0x1000	/* AX88796L IO Base Address */
-
-#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
-
-#if defined(CONFIG_RTS7751R2D_REV11)
-#define IRQ_PCIETH	0		/* PCI Ethernet IRQ */
-#define IRQ_CFCARD	1		/* CF Card IRQ */
-#define IRQ_CFINST	2		/* CF Card Insert IRQ */
-#define IRQ_PCMCIA	3		/* PCMCIA IRQ */
-#define IRQ_VOYAGER	4		/* VOYAGER IRQ */
-#define IRQ_ONETH	5		/* On board Ethernet IRQ */
-#else
-#define IRQ_KEYIN	0		/* Key Input IRQ */
-#define IRQ_PCIETH	1		/* PCI Ethernet IRQ */
-#define IRQ_CFCARD	2		/* CF Card IRQ */
-#define IRQ_CFINST	3		/* CF Card Insert IRQ */
-#define IRQ_PCMCIA	4		/* PCMCIA IRQ */
-#define IRQ_VOYAGER	5		/* VOYAGER IRQ */
-#endif
-#define IRQ_RTCALM	6		/* RTC Alarm IRQ */
-#define IRQ_RTCTIME	7		/* RTC Timer IRQ */
-#define IRQ_SDCARD	8		/* SD Card IRQ */
-#define IRQ_PCISLOT1	9		/* PCI Slot #1 IRQ */
-#define IRQ_PCISLOT2	10		/* PCI Slot #2 IRQ */
-#define	IRQ_EXTENTION	11		/* EXTn IRQ */
-
-#define __IO_PREFIX rts7751r2d
-#include <asm/io_generic.h>
-
-#endif  /* __ASM_SH_RENESAS_RTS7751R2D */

include/asm-sh/shmin/shmin.h

-#ifndef __ASM_SH_SHMIN_H
-#define __ASM_SH_SHMIN_H
-
-#define SHMIN_IO_BASE 0xb0000000UL
-
-#define SHMIN_NE_IRQ IRQ2_IRQ
-#define SHMIN_NE_BASE 0x300
-
-#endif

sound/oss/sh_dac_audio.c

@@ -26,7 +26,7 @@
 #include <asm/cpu/dac.h>
 #include <asm/cpu/timer.h>
 #include <asm/machvec.h>
-#include <asm/hp6xx/hp6xx.h>
+#include <asm/hp6xx.h>
 #include <asm/hd64461.h>
 
 #define MODNAME "sh_dac_audio"