- 26 2月, 2016 1 次提交
-
-
Set CRTC modesetting parameters to avoid warnings in atomic mode. Signed-off-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: NVincent Abriou <vincent.abriou@st.com>
-
- 11 12月, 2015 1 次提交
-
-
由 Ville Syrjälä 提交于
Done with coccinelle for the most part. However, it thinks '...' is part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder in its place and got rid of it with sed afterwards. I didn't convert drm_crtc_init() since passing the varargs through would mean either cpp macros or va_list, and I figured we don't care about these legacy functions enough to warrant the extra pain. @@ identifier dev, crtc, primary, cursor, funcs; @@ int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, struct drm_plane *primary, struct drm_plane *cursor, const struct drm_crtc_funcs *funcs + ,const char *name, int DOTDOTDOT ) { ... } @@ identifier dev, crtc, primary, cursor, funcs; @@ int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, struct drm_plane *primary, struct drm_plane *cursor, const struct drm_crtc_funcs *funcs + ,const char *name, int DOTDOTDOT ); @@ expression E1, E2, E3, E4, E5; @@ drm_crtc_init_with_planes(E1, E2, E3, E4, E5 + ,NULL ) v2: Split crtc and plane changes apart Pass NULL for no-name instead of "" Leave drm_crtc_init() alone v3: Add ', or NULL...' to @name kernel doc (Jani) Annotate the function with __printf() attribute (Jani) Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449670771-2751-1-git-send-email-ville.syrjala@linux.intel.com
-
- 03 11月, 2015 4 次提交
-
-
由 Thierry Reding 提交于
None of these exported symbols are used outside of the drm-sti driver, so there is no reason to export them. Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Signed-off-by: NThierry Reding <treding@nvidia.com> Reviewed-by: NVincent Abriou <vincent.abriou@st.com>
-
由 Thierry Reding 提交于
Non-legacy drivers should only use this API to allow per-CRTC data to be eventually moved into struct drm_crtc. Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Signed-off-by: NThierry Reding <treding@nvidia.com> Reviewed-by: NVincent Abriou <vincent.abriou@st.com>
-
由 Thierry Reding 提交于
A negative pipe causes a special case to be triggered for drivers that don't have proper VBLANK support. STi does support VBLANKs, so there is no need for the fallback code. Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Signed-off-by: NThierry Reding <treding@nvidia.com> Reviewed-by: NVincent Abriou <vincent.abriou@st.com>
-
由 Ville Syrjälä 提交于
Moves a bunch of junk to .rodata from .data. drivers/gpu/drm/sti/sticompositor.ko: -.text 12216 +.text 12212 -.rodata 1284 +.rodata 1400 -.data 488 +.data 372 drivers/gpu/drm/sti/sti_drv.ko: -.rodata 516 +.rodata 544 -.data 368 +.data 340 drivers/gpu/drm/sti/stidvo.ko: -.text 3356 +.text 3348 -.rodata 188 +.rodata 256 -.data 572 +.data 504 drivers/gpu/drm/sti/sti_hda.ko: -.text 3008 +.text 3004 -.rodata 2820 +.rodata 2888 -.data 684 +.data 616 drivers/gpu/drm/sti/stihdmi.ko: -.text 6988 +.text 6980 -.rodata 1340 +.rodata 1408 -.data 176 +.data 108 Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 06 10月, 2015 1 次提交
-
-
由 Thierry Reding 提交于
This continues the pattern started in commit cc1ef118 ("drm/irq: Make pipe unsigned and name consistent"). This is applied to the public APIs and driver callbacks, so pretty much all drivers need to be updated to match the new prototypes. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Inki Dae <inki.dae@samsung.com> Cc: Jianwei Wang <jianwei.wang.chn@gmail.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Rob Clark <robdclark@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NThierry Reding <treding@nvidia.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 03 8月, 2015 3 次提交
-
-
由 Vincent Abriou 提交于
Better fit STI hardware structure. Planes are no more responsible of updating mixer information such as z-order and status. It is now up to the CRTC atomic flush to do it. Plane actions (enable or disable) are performed atomically. Disabling of a plane is synchronize with the vsync event. Signed-off-by: NVincent Abriou <vincent.abriou@st.com> Reviewed-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
-
由 Vincent Abriou 提交于
replace all "sti_drm_" occurences by "sti_" Signed-off-by: NVincent Abriou <vincent.abriou@st.com> Reviewed-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
-
由 Vincent Abriou 提交于
Purpose is to simplify the STI driver: - remove layer structure - consider video subdev as part of the compositor (like mixer subdev) - remove useless STI_VID0 and STI_VID1 enum Signed-off-by: NVincent Abriou <vincent.abriou@st.com> Reviewed-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
-
- 27 7月, 2015 1 次提交
-
-
由 Maarten Lankhorst 提交于
In intel it's useful to keep track of some state changes with old crtc state vs new state, for example to disable initial planes or when a modeset's prevented during fastboot. Cc: dri-devel@lists.freedesktop.org Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com> [danvet: squash in fixup for exynos provided by Maarten.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 19 3月, 2015 1 次提交
-
-
由 Benjamin Gaignard 提交于
v1: This patch does the minimum to make sti driver use atomic helpers. No big bang, only adapt some functions to new call order. v2: Use dpms and page flip atomic helpers Signed-off-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
-
- 11 12月, 2014 5 次提交
-
-
由 Benjamin Gaignard 提交于
High Quality Video Data Plane is hardware IP dedicated to video rendering. Compare to GPD (graphic planes) it have better scaler capabilities. HQVDP use VID layer to push data into hardware compositor without going into DDR. From data flow point of view HQVDP and VID are nested so HQVPD update/disable VID. Signed-off-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
-
由 Benjamin Gaignard 提交于
For stih407 SoC enable the second mixer to get two CRTC. Allow GPD planes and encoders to be connected to this new CRTC. Cursor plane can only be set on first CRTC. GPD clocks needed change the parent clock depending on which CRTC GPD are used. Signed-off-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
-
由 Benjamin Gaignard 提交于
Make sure that vblank is enabled when crtc commit is call. Replace drm_vblank_off() by drm_crtc_vblank_off() Signed-off-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
-
由 Benjamin Gaignard 提交于
Stop use event_lock in vblank disable function. This was creating a dead lock. Signed-off-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
-
由 Benjamin Gaignard 提交于
Make sure that mixer control register is correctly reset before use it. Signed-off-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
-
- 10 12月, 2014 1 次提交
-
-
由 Thierry Reding 提交于
The ->load_lut() callback is optional, therefore a dummy implementation is not needed. Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 05 11月, 2014 1 次提交
-
-
由 Daniel Vetter 提交于
Just a bit of OCD cleanup on headers - this function isn't the core interface any more but just a helper for drivers who haven't yet transitioned to universal planes. Put the declaration at the right spot and sprinkle necessary #includes over all drivers. Maybe this helps to encourage driver maintainers to do the switch. v2: Fix #include ordering for tegra, reported by 0-day builder. v3: Include required headers, reported by Thierry. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Thierry Reding <treding@nvidia.com> Reviewed-by: NMatt Roper <matthew.d.roper@intel.com> Reviewed-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
-
- 05 8月, 2014 1 次提交
-
-
由 Dave Airlie 提交于
Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 31 7月, 2014 1 次提交
-
-
由 Benjamin Gaignard 提交于
Make the link between all the hardware drivers and DRM/KMS interface. Create the driver itself and make it register all the sub-components. Use GEM CMA helpers for buffer allocation. Signed-off-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: NRob Clark <robdclark@gmail.com>
-