提交 29d1dc62 编写于 作者: V Vincent Abriou 提交者: Benjamin Gaignard

drm/sti: atomic crtc/plane update

Better fit STI hardware structure.
Planes are no more responsible of updating mixer information such
as z-order and status. It is now up to the CRTC atomic flush to
do it. Plane actions (enable or disable) are performed atomically.
Disabling of a plane is synchronize with the vsync event.
Signed-off-by: NVincent Abriou <vincent.abriou@st.com>
Reviewed-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
上级 9e1f05b2
......@@ -61,15 +61,13 @@ static int sti_compositor_bind(struct device *dev,
{
struct sti_compositor *compo = dev_get_drvdata(dev);
struct drm_device *drm_dev = data;
unsigned int i, mixer_id = 0, vid_id = 0, crtc_id = 0, plane_id = 0;
unsigned int i, mixer_id = 0, vid_id = 0, crtc_id = 0;
struct sti_private *dev_priv = drm_dev->dev_private;
struct drm_plane *cursor = NULL;
struct drm_plane *primary = NULL;
struct sti_compositor_subdev_descriptor *desc = compo->data.subdev_desc;
unsigned int array_size = compo->data.nb_subdev;
struct sti_plane *plane;
dev_priv->compo = compo;
/* Register mixer subdev and video subdev first */
......@@ -110,27 +108,25 @@ static int sti_compositor_bind(struct device *dev,
/* Nothing to do, already done at the first round */
break;
case STI_CURSOR_SUBDEV:
plane = sti_cursor_create(compo->dev, desc[i].id,
compo->regs + desc[i].offset);
if (!plane) {
cursor = sti_cursor_create(drm_dev, compo->dev,
desc[i].id,
compo->regs + desc[i].offset,
1);
if (!cursor) {
DRM_ERROR("Can't create CURSOR plane\n");
break;
}
cursor = sti_plane_init(drm_dev, plane, 1,
DRM_PLANE_TYPE_CURSOR);
plane_id++;
break;
case STI_GPD_SUBDEV:
plane = sti_gdp_create(compo->dev, desc[i].id,
compo->regs + desc[i].offset);
if (!plane) {
primary = sti_gdp_create(drm_dev, compo->dev,
desc[i].id,
compo->regs + desc[i].offset,
(1 << mixer_id) - 1,
plane_type);
if (!primary) {
DRM_ERROR("Can't create GDP plane\n");
break;
}
primary = sti_plane_init(drm_dev, plane,
(1 << mixer_id) - 1,
plane_type);
plane_id++;
break;
default:
DRM_ERROR("Unknown subdev compoment type\n");
......@@ -151,10 +147,6 @@ static int sti_compositor_bind(struct device *dev,
/* Allow usage of vblank without having to call drm_irq_install */
drm_dev->irq_enabled = 1;
DRM_DEBUG_DRIVER("Initialized %d DRM CRTC(s) and %d DRM plane(s)\n",
crtc_id, plane_id);
DRM_DEBUG_DRIVER("DRM plane(s) for VID/VDP not created yet\n");
return 0;
}
......
......@@ -17,20 +17,18 @@
#include "sti_compositor.h"
#include "sti_crtc.h"
#include "sti_drv.h"
#include "sti_vid.h"
#include "sti_vtg.h"
static void sti_crtc_dpms(struct drm_crtc *crtc, int mode)
{
DRM_DEBUG_KMS("\n");
}
static void sti_crtc_prepare(struct drm_crtc *crtc)
static void sti_crtc_enable(struct drm_crtc *crtc)
{
struct sti_mixer *mixer = to_sti_mixer(crtc);
struct device *dev = mixer->dev;
struct sti_compositor *compo = dev_get_drvdata(dev);
mixer->enabled = true;
DRM_DEBUG_DRIVER("\n");
mixer->status = STI_MIXER_READY;
/* Prepare and enable the compo IP clock */
if (mixer->id == STI_MIXER_MAIN) {
......@@ -41,31 +39,16 @@ static void sti_crtc_prepare(struct drm_crtc *crtc)
DRM_INFO("Failed to prepare/enable compo_aux clk\n");
}
sti_mixer_clear_all_planes(mixer);
drm_crtc_vblank_on(crtc);
}
static void sti_crtc_commit(struct drm_crtc *crtc)
static void sti_crtc_disabling(struct drm_crtc *crtc)
{
struct sti_mixer *mixer = to_sti_mixer(crtc);
struct device *dev = mixer->dev;
struct sti_compositor *compo = dev_get_drvdata(dev);
struct sti_plane *plane;
if ((!mixer || !compo)) {
DRM_ERROR("Can't find mixer or compositor)\n");
return;
}
/* get GDP which is reserved to the CRTC FB */
plane = to_sti_plane(crtc->primary);
if (!plane)
DRM_ERROR("Can't find CRTC dedicated plane (GDP0)\n");
/* Enable plane on mixer */
if (sti_mixer_set_plane_status(mixer, plane, true))
DRM_ERROR("Cannot enable plane at mixer\n");
DRM_DEBUG_DRIVER("\n");
drm_crtc_vblank_on(crtc);
mixer->status = STI_MIXER_DISABLING;
}
static bool sti_crtc_mode_fixup(struct drm_crtc *crtc,
......@@ -133,9 +116,6 @@ static void sti_crtc_disable(struct drm_crtc *crtc)
struct device *dev = mixer->dev;
struct sti_compositor *compo = dev_get_drvdata(dev);
if (!mixer->enabled)
return;
DRM_DEBUG_KMS("CRTC:%d (%s)\n", crtc->base.id, sti_mixer_to_str(mixer));
/* Disable Background */
......@@ -152,13 +132,13 @@ static void sti_crtc_disable(struct drm_crtc *crtc)
clk_disable_unprepare(compo->clk_compo_aux);
}
mixer->enabled = false;
mixer->status = STI_MIXER_DISABLED;
}
static void
sti_crtc_mode_set_nofb(struct drm_crtc *crtc)
{
sti_crtc_prepare(crtc);
sti_crtc_enable(crtc);
sti_crtc_mode_set(crtc, &crtc->state->adjusted_mode);
}
......@@ -178,17 +158,79 @@ static void sti_crtc_atomic_begin(struct drm_crtc *crtc)
static void sti_crtc_atomic_flush(struct drm_crtc *crtc)
{
struct drm_device *drm_dev = crtc->dev;
struct sti_mixer *mixer = to_sti_mixer(crtc);
struct sti_compositor *compo = dev_get_drvdata(mixer->dev);
struct drm_plane *p;
DRM_DEBUG_DRIVER("\n");
/* perform plane actions */
list_for_each_entry(p, &drm_dev->mode_config.plane_list, head) {
struct sti_plane *plane = to_sti_plane(p);
switch (plane->status) {
case STI_PLANE_UPDATED:
/* update planes tag as updated */
DRM_DEBUG_DRIVER("update plane %s\n",
sti_plane_to_str(plane));
if (sti_mixer_set_plane_depth(mixer, plane)) {
DRM_ERROR("Cannot set plane %s depth\n",
sti_plane_to_str(plane));
break;
}
if (sti_mixer_set_plane_status(mixer, plane, true)) {
DRM_ERROR("Cannot enable plane %s at mixer\n",
sti_plane_to_str(plane));
break;
}
/* if plane is HQVDP_0 then commit the vid[0] */
if (plane->desc == STI_HQVDP_0)
sti_vid_commit(compo->vid[0], p->state);
plane->status = STI_PLANE_READY;
break;
case STI_PLANE_DISABLING:
/* disabling sequence for planes tag as disabling */
DRM_DEBUG_DRIVER("disable plane %s from mixer\n",
sti_plane_to_str(plane));
if (sti_mixer_set_plane_status(mixer, plane, false)) {
DRM_ERROR("Cannot disable plane %s at mixer\n",
sti_plane_to_str(plane));
continue;
}
if (plane->desc == STI_CURSOR)
/* tag plane status for disabled */
plane->status = STI_PLANE_DISABLED;
else
/* tag plane status for flushing */
plane->status = STI_PLANE_FLUSHING;
/* if plane is HQVDP_0 then disable the vid[0] */
if (plane->desc == STI_HQVDP_0)
sti_vid_disable(compo->vid[0]);
break;
default:
/* Other status case are not handled */
break;
}
}
}
static struct drm_crtc_helper_funcs sti_crtc_helper_funcs = {
.dpms = sti_crtc_dpms,
.prepare = sti_crtc_prepare,
.commit = sti_crtc_commit,
.enable = sti_crtc_enable,
.disable = sti_crtc_disabling,
.mode_fixup = sti_crtc_mode_fixup,
.mode_set = drm_helper_crtc_mode_set,
.mode_set_nofb = sti_crtc_mode_set_nofb,
.mode_set_base = drm_helper_crtc_mode_set_base,
.disable = sti_crtc_disable,
.atomic_begin = sti_crtc_atomic_begin,
.atomic_flush = sti_crtc_atomic_flush,
};
......@@ -237,6 +279,21 @@ int sti_crtc_vblank_cb(struct notifier_block *nb,
}
spin_unlock_irqrestore(&drm_dev->event_lock, flags);
if (compo->mixer[*crtc]->status == STI_MIXER_DISABLING) {
struct drm_plane *p;
/* Disable mixer only if all overlay planes (GDP and VDP)
* are disabled */
list_for_each_entry(p, &drm_dev->mode_config.plane_list, head) {
struct sti_plane *plane = to_sti_plane(p);
if ((plane->desc & STI_PLANE_TYPE_MASK) <= STI_VDP)
if (plane->status != STI_PLANE_DISABLED)
return 0;
}
sti_crtc_disable(&compo->mixer[*crtc]->drm_crtc);
}
return 0;
}
......@@ -259,9 +316,9 @@ int sti_crtc_enable_vblank(struct drm_device *dev, int crtc)
}
EXPORT_SYMBOL(sti_crtc_enable_vblank);
void sti_crtc_disable_vblank(struct drm_device *dev, int crtc)
void sti_crtc_disable_vblank(struct drm_device *drm_dev, int crtc)
{
struct sti_private *priv = dev->dev_private;
struct sti_private *priv = drm_dev->dev_private;
struct sti_compositor *compo = priv->compo;
struct notifier_block *vtg_vblank_nb = &compo->vtg_vblank_nb;
......@@ -273,7 +330,7 @@ void sti_crtc_disable_vblank(struct drm_device *dev, int crtc)
/* free the resources of the pending requests */
if (compo->mixer[crtc]->pending_event) {
drm_vblank_put(dev, crtc);
drm_vblank_put(drm_dev, crtc);
compo->mixer[crtc]->pending_event = NULL;
}
}
......
......@@ -7,6 +7,12 @@
*/
#include <drm/drmP.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_fb_cma_helper.h>
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_plane_helper.h>
#include "sti_compositor.h"
#include "sti_cursor.h"
#include "sti_plane.h"
#include "sti_vtg.h"
......@@ -42,14 +48,14 @@ struct dma_pixmap {
/**
* STI Cursor structure
*
* @sti_plane: sti_plane structure
* @dev: driver device
* @regs: cursor registers
* @width: cursor width
* @height: cursor height
* @clut: color look up table
* @clut_paddr: color look up table physical address
* @pixmap: pixmap dma buffer (clut8-format cursor)
* @sti_plane: sti_plane structure
* @dev: driver device
* @regs: cursor registers
* @width: cursor width
* @height: cursor height
* @clut: color look up table
* @clut_paddr: color look up table physical address
* @pixmap: pixmap dma buffer (clut8-format cursor)
*/
struct sti_cursor {
struct sti_plane plane;
......@@ -68,20 +74,8 @@ static const uint32_t cursor_supported_formats[] = {
#define to_sti_cursor(x) container_of(x, struct sti_cursor, plane)
static const uint32_t *sti_cursor_get_formats(struct sti_plane *plane)
{
return cursor_supported_formats;
}
static unsigned int sti_cursor_get_nb_formats(struct sti_plane *plane)
{
return ARRAY_SIZE(cursor_supported_formats);
}
static void sti_cursor_argb8888_to_clut8(struct sti_plane *plane)
static void sti_cursor_argb8888_to_clut8(struct sti_cursor *cursor, u32 *src)
{
struct sti_cursor *cursor = to_sti_cursor(plane);
u32 *src = plane->vaddr;
u8 *dst = cursor->pixmap.base;
unsigned int i, j;
u32 a, r, g, b;
......@@ -100,32 +94,67 @@ static void sti_cursor_argb8888_to_clut8(struct sti_plane *plane)
}
}
static int sti_cursor_prepare_plane(struct sti_plane *plane, bool first_prepare)
static void sti_cursor_init(struct sti_cursor *cursor)
{
unsigned short *base = cursor->clut;
unsigned int a, r, g, b;
/* Assign CLUT values, ARGB444 format */
for (a = 0; a < 4; a++)
for (r = 0; r < 4; r++)
for (g = 0; g < 4; g++)
for (b = 0; b < 4; b++)
*base++ = (a * 5) << 12 |
(r * 5) << 8 |
(g * 5) << 4 |
(b * 5);
}
static void sti_cursor_atomic_update(struct drm_plane *drm_plane,
struct drm_plane_state *oldstate)
{
struct drm_plane_state *state = drm_plane->state;
struct sti_plane *plane = to_sti_plane(drm_plane);
struct sti_cursor *cursor = to_sti_cursor(plane);
struct drm_display_mode *mode = plane->mode;
struct drm_crtc *crtc = state->crtc;
struct sti_mixer *mixer = to_sti_mixer(crtc);
struct drm_framebuffer *fb = state->fb;
struct drm_display_mode *mode = &crtc->mode;
int dst_x = state->crtc_x;
int dst_y = state->crtc_y;
int dst_w = clamp_val(state->crtc_w, 0, mode->crtc_hdisplay - dst_x);
int dst_h = clamp_val(state->crtc_h, 0, mode->crtc_vdisplay - dst_y);
/* src_x are in 16.16 format */
int src_w = state->src_w >> 16;
int src_h = state->src_h >> 16;
bool first_prepare = plane->status == STI_PLANE_DISABLED ? true : false;
struct drm_gem_cma_object *cma_obj;
u32 y, x;
u32 val;
DRM_DEBUG_DRIVER("\n");
DRM_DEBUG_KMS("CRTC:%d (%s) drm plane:%d (%s)\n",
crtc->base.id, sti_mixer_to_str(mixer),
drm_plane->base.id, sti_plane_to_str(plane));
DRM_DEBUG_KMS("(%dx%d)@(%d,%d)\n", dst_w, dst_h, dst_x, dst_y);
dev_dbg(cursor->dev, "%s %s\n", __func__, sti_plane_to_str(plane));
dev_dbg(cursor->dev, "%s %s\n", __func__,
sti_plane_to_str(plane));
if (plane->src_w < STI_CURS_MIN_SIZE ||
plane->src_h < STI_CURS_MIN_SIZE ||
plane->src_w > STI_CURS_MAX_SIZE ||
plane->src_h > STI_CURS_MAX_SIZE) {
if (src_w < STI_CURS_MIN_SIZE ||
src_h < STI_CURS_MIN_SIZE ||
src_w > STI_CURS_MAX_SIZE ||
src_h > STI_CURS_MAX_SIZE) {
DRM_ERROR("Invalid cursor size (%dx%d)\n",
plane->src_w, plane->src_h);
return -EINVAL;
src_w, src_h);
return;
}
/* If the cursor size has changed, re-allocated the pixmap */
if (!cursor->pixmap.base ||
(cursor->width != plane->src_w) ||
(cursor->height != plane->src_h)) {
cursor->width = plane->src_w;
cursor->height = plane->src_h;
(cursor->width != src_w) ||
(cursor->height != src_h)) {
cursor->width = src_w;
cursor->height = src_h;
if (cursor->pixmap.base)
dma_free_writecombine(cursor->dev,
......@@ -141,12 +170,18 @@ static int sti_cursor_prepare_plane(struct sti_plane *plane, bool first_prepare)
GFP_KERNEL | GFP_DMA);
if (!cursor->pixmap.base) {
DRM_ERROR("Failed to allocate memory for pixmap\n");
return -ENOMEM;
return;
}
}
cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
if (!cma_obj) {
DRM_ERROR("Can't get CMA GEM object for fb\n");
return;
}
/* Convert ARGB8888 to CLUT8 */
sti_cursor_argb8888_to_clut8(plane);
sti_cursor_argb8888_to_clut8(cursor, (u32 *)cma_obj->vaddr);
/* AWS and AWE depend on the mode */
y = sti_vtg_get_line_number(*mode, 0);
......@@ -164,62 +199,50 @@ static int sti_cursor_prepare_plane(struct sti_plane *plane, bool first_prepare)
writel(CUR_CTL_CLUT_UPDATE, cursor->regs + CUR_CTL);
}
return 0;
}
static int sti_cursor_commit_plane(struct sti_plane *plane)
{
struct sti_cursor *cursor = to_sti_cursor(plane);
struct drm_display_mode *mode = plane->mode;
u32 ydo, xdo;
dev_dbg(cursor->dev, "%s %s\n", __func__, sti_plane_to_str(plane));
/* Set memory location, size, and position */
writel(cursor->pixmap.paddr, cursor->regs + CUR_PML);
writel(cursor->width, cursor->regs + CUR_PMP);
writel(cursor->height << 16 | cursor->width, cursor->regs + CUR_SIZE);
ydo = sti_vtg_get_line_number(*mode, plane->dst_y);
xdo = sti_vtg_get_pixel_number(*mode, plane->dst_y);
writel((ydo << 16) | xdo, cursor->regs + CUR_VPO);
y = sti_vtg_get_line_number(*mode, dst_y);
x = sti_vtg_get_pixel_number(*mode, dst_y);
writel((y << 16) | x, cursor->regs + CUR_VPO);
return 0;
plane->status = STI_PLANE_UPDATED;
}
static int sti_cursor_disable_plane(struct sti_plane *plane)
static void sti_cursor_atomic_disable(struct drm_plane *drm_plane,
struct drm_plane_state *oldstate)
{
return 0;
}
struct sti_plane *plane = to_sti_plane(drm_plane);
struct sti_mixer *mixer = to_sti_mixer(drm_plane->crtc);
static void sti_cursor_init(struct sti_cursor *cursor)
{
unsigned short *base = cursor->clut;
unsigned int a, r, g, b;
if (!drm_plane->crtc) {
DRM_DEBUG_DRIVER("drm plane:%d not enabled\n",
drm_plane->base.id);
return;
}
/* Assign CLUT values, ARGB444 format */
for (a = 0; a < 4; a++)
for (r = 0; r < 4; r++)
for (g = 0; g < 4; g++)
for (b = 0; b < 4; b++)
*base++ = (a * 5) << 12 |
(r * 5) << 8 |
(g * 5) << 4 |
(b * 5);
DRM_DEBUG_DRIVER("CRTC:%d (%s) drm plane:%d (%s)\n",
drm_plane->crtc->base.id, sti_mixer_to_str(mixer),
drm_plane->base.id, sti_plane_to_str(plane));
plane->status = STI_PLANE_DISABLING;
}
static const struct sti_plane_funcs cursor_plane_ops = {
.get_formats = sti_cursor_get_formats,
.get_nb_formats = sti_cursor_get_nb_formats,
.prepare = sti_cursor_prepare_plane,
.commit = sti_cursor_commit_plane,
.disable = sti_cursor_disable_plane,
static const struct drm_plane_helper_funcs sti_cursor_helpers_funcs = {
.atomic_update = sti_cursor_atomic_update,
.atomic_disable = sti_cursor_atomic_disable,
};
struct sti_plane *sti_cursor_create(struct device *dev, int desc,
void __iomem *baseaddr)
struct drm_plane *sti_cursor_create(struct drm_device *drm_dev,
struct device *dev, int desc,
void __iomem *baseaddr,
unsigned int possible_crtcs)
{
struct sti_cursor *cursor;
size_t size;
int res;
cursor = devm_kzalloc(dev, sizeof(*cursor), GFP_KERNEL);
if (!cursor) {
......@@ -228,23 +251,43 @@ struct sti_plane *sti_cursor_create(struct device *dev, int desc,
}
/* Allocate clut buffer */
cursor->clut = dma_alloc_writecombine(dev,
0x100 * sizeof(unsigned short),
&cursor->clut_paddr,
GFP_KERNEL | GFP_DMA);
size = 0x100 * sizeof(unsigned short);
cursor->clut = dma_alloc_writecombine(dev, size, &cursor->clut_paddr,
GFP_KERNEL | GFP_DMA);
if (!cursor->clut) {
DRM_ERROR("Failed to allocate memory for cursor clut\n");
devm_kfree(dev, cursor);
return NULL;
goto err_clut;
}
cursor->dev = dev;
cursor->regs = baseaddr;
cursor->plane.desc = desc;
cursor->plane.ops = &cursor_plane_ops;
cursor->plane.status = STI_PLANE_DISABLED;
sti_cursor_init(cursor);
return &cursor->plane;
res = drm_universal_plane_init(drm_dev, &cursor->plane.drm_plane,
possible_crtcs,
&sti_plane_helpers_funcs,
cursor_supported_formats,
ARRAY_SIZE(cursor_supported_formats),
DRM_PLANE_TYPE_CURSOR);
if (res) {
DRM_ERROR("Failed to initialize universal plane\n");
goto err_plane;
}
drm_plane_helper_add(&cursor->plane.drm_plane,
&sti_cursor_helpers_funcs);
sti_plane_init_property(&cursor->plane, DRM_PLANE_TYPE_CURSOR);
return &cursor->plane.drm_plane;
err_plane:
dma_free_writecombine(dev, size, cursor->clut, cursor->clut_paddr);
err_clut:
devm_kfree(dev, cursor);
return NULL;
}
......@@ -7,7 +7,9 @@
#ifndef _STI_CURSOR_H_
#define _STI_CURSOR_H_
struct sti_plane *sti_cursor_create(struct device *dev, int desc,
void __iomem *baseaddr);
struct drm_plane *sti_cursor_create(struct drm_device *drm_dev,
struct device *dev, int desc,
void __iomem *baseaddr,
unsigned int possible_crtcs);
#endif
......@@ -9,6 +9,9 @@
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <drm/drm_fb_cma_helper.h>
#include <drm/drm_gem_cma_helper.h>
#include "sti_compositor.h"
#include "sti_gdp.h"
#include "sti_plane.h"
......@@ -26,7 +29,7 @@
#define GDP_XBGR8888 (GDP_RGB888_32 | BIGNOTLITTLE | ALPHASWITCH)
#define GDP_ARGB8565 0x04
#define GDP_ARGB8888 0x05
#define GDP_ABGR8888 (GDP_ARGB8888 | BIGNOTLITTLE | ALPHASWITCH)
#define GDP_ABGR8888 (GDP_ARGB8888 | BIGNOTLITTLE | ALPHASWITCH)
#define GDP_ARGB1555 0x06
#define GDP_ARGB4444 0x07
#define GDP_CLUT8 0x0B
......@@ -53,8 +56,8 @@
#define GAM_GDP_PPT_IGNORE (BIT(1) | BIT(0))
#define GAM_GDP_SIZE_MAX 0x7FF
#define GDP_NODE_NB_BANK 2
#define GDP_NODE_PER_FIELD 2
#define GDP_NODE_NB_BANK 2
#define GDP_NODE_PER_FIELD 2
struct sti_gdp_node {
u32 gam_gdp_ctl;
......@@ -124,16 +127,6 @@ static const uint32_t gdp_supported_formats[] = {
DRM_FORMAT_C8,
};
static const uint32_t *sti_gdp_get_formats(struct sti_plane *plane)
{
return gdp_supported_formats;
}
static unsigned int sti_gdp_get_nb_formats(struct sti_plane *plane)
{
return ARRAY_SIZE(gdp_supported_formats);
}
static int sti_gdp_fourcc2format(int fourcc)
{
switch (fourcc) {
......@@ -179,17 +172,16 @@ static int sti_gdp_get_alpharange(int format)
/**
* sti_gdp_get_free_nodes
* @plane: gdp plane
* @gdp: gdp pointer
*
* Look for a GDP node list that is not currently read by the HW.
*
* RETURNS:
* Pointer to the free GDP node list
*/
static struct sti_gdp_node_list *sti_gdp_get_free_nodes(struct sti_plane *plane)
static struct sti_gdp_node_list *sti_gdp_get_free_nodes(struct sti_gdp *gdp)
{
int hw_nvn;
struct sti_gdp *gdp = to_sti_gdp(plane);
unsigned int i;
hw_nvn = readl(gdp->regs + GAM_GDP_NVN_OFFSET);
......@@ -203,7 +195,7 @@ static struct sti_gdp_node_list *sti_gdp_get_free_nodes(struct sti_plane *plane)
/* in hazardious cases restart with the first node */
DRM_ERROR("inconsistent NVN for %s: 0x%08X\n",
sti_plane_to_str(plane), hw_nvn);
sti_plane_to_str(&gdp->plane), hw_nvn);
end:
return &gdp->node_list[0];
......@@ -211,7 +203,7 @@ static struct sti_gdp_node_list *sti_gdp_get_free_nodes(struct sti_plane *plane)
/**
* sti_gdp_get_current_nodes
* @plane: GDP plane
* @gdp: gdp pointer
*
* Look for GDP nodes that are currently read by the HW.
*
......@@ -219,10 +211,9 @@ static struct sti_gdp_node_list *sti_gdp_get_free_nodes(struct sti_plane *plane)
* Pointer to the current GDP node list
*/
static
struct sti_gdp_node_list *sti_gdp_get_current_nodes(struct sti_plane *plane)
struct sti_gdp_node_list *sti_gdp_get_current_nodes(struct sti_gdp *gdp)
{
int hw_nvn;
struct sti_gdp *gdp = to_sti_gdp(plane);
unsigned int i;
hw_nvn = readl(gdp->regs + GAM_GDP_NVN_OFFSET);
......@@ -236,205 +227,25 @@ struct sti_gdp_node_list *sti_gdp_get_current_nodes(struct sti_plane *plane)
end:
DRM_DEBUG_DRIVER("Warning, NVN 0x%08X for %s does not match any node\n",
hw_nvn, sti_plane_to_str(plane));
hw_nvn, sti_plane_to_str(&gdp->plane));
return NULL;
}
/**
* sti_gdp_prepare
* @plane: gdp plane
* @first_prepare: true if it is the first time this function is called
*
* Update the free GDP node list according to the plane properties.
*
* RETURNS:
* 0 on success.
*/
static int sti_gdp_prepare(struct sti_plane *plane, bool first_prepare)
{
struct sti_gdp_node_list *list;
struct sti_gdp_node *top_field, *btm_field;
struct drm_display_mode *mode = plane->mode;
struct sti_gdp *gdp = to_sti_gdp(plane);
struct device *dev = gdp->dev;
struct sti_compositor *compo = dev_get_drvdata(dev);
int format;
unsigned int depth, bpp;
int rate = mode->clock * 1000;
int res;
u32 ydo, xdo, yds, xds;
list = sti_gdp_get_free_nodes(plane);
top_field = list->top_field;
btm_field = list->btm_field;
dev_dbg(dev, "%s %s top_node:0x%p btm_node:0x%p\n", __func__,
sti_plane_to_str(plane), top_field, btm_field);
/* Build the top field from plane params */
top_field->gam_gdp_agc = GAM_GDP_AGC_FULL_RANGE;
top_field->gam_gdp_ctl = WAIT_NEXT_VSYNC;
format = sti_gdp_fourcc2format(plane->format);
if (format == -1) {
DRM_ERROR("Format not supported by GDP %.4s\n",
(char *)&plane->format);
return 1;
}
top_field->gam_gdp_ctl |= format;
top_field->gam_gdp_ctl |= sti_gdp_get_alpharange(format);
top_field->gam_gdp_ppt &= ~GAM_GDP_PPT_IGNORE;
/* pixel memory location */
drm_fb_get_bpp_depth(plane->format, &depth, &bpp);
top_field->gam_gdp_pml = (u32)plane->paddr + plane->offsets[0];
top_field->gam_gdp_pml += plane->src_x * (bpp >> 3);
top_field->gam_gdp_pml += plane->src_y * plane->pitches[0];
/* input parameters */
top_field->gam_gdp_pmp = plane->pitches[0];
top_field->gam_gdp_size =
clamp_val(plane->src_h, 0, GAM_GDP_SIZE_MAX) << 16 |
clamp_val(plane->src_w, 0, GAM_GDP_SIZE_MAX);
/* output parameters */
ydo = sti_vtg_get_line_number(*mode, plane->dst_y);
yds = sti_vtg_get_line_number(*mode, plane->dst_y + plane->dst_h - 1);
xdo = sti_vtg_get_pixel_number(*mode, plane->dst_x);
xds = sti_vtg_get_pixel_number(*mode, plane->dst_x + plane->dst_w - 1);
top_field->gam_gdp_vpo = (ydo << 16) | xdo;
top_field->gam_gdp_vps = (yds << 16) | xds;
/* Same content and chained together */
memcpy(btm_field, top_field, sizeof(*btm_field));
top_field->gam_gdp_nvn = list->btm_field_paddr;
btm_field->gam_gdp_nvn = list->top_field_paddr;
/* Interlaced mode */
if (plane->mode->flags & DRM_MODE_FLAG_INTERLACE)
btm_field->gam_gdp_pml = top_field->gam_gdp_pml +
plane->pitches[0];
if (first_prepare) {
/* Register gdp callback */
if (sti_vtg_register_client(plane->mixer_id == STI_MIXER_MAIN ?
compo->vtg_main : compo->vtg_aux,
&gdp->vtg_field_nb, plane->mixer_id)) {
DRM_ERROR("Cannot register VTG notifier\n");
return 1;
}
/* Set and enable gdp clock */
if (gdp->clk_pix) {
struct clk *clkp;
/* According to the mixer used, the gdp pixel clock
* should have a different parent clock. */
if (plane->mixer_id == STI_MIXER_MAIN)
clkp = gdp->clk_main_parent;
else
clkp = gdp->clk_aux_parent;
if (clkp)
clk_set_parent(gdp->clk_pix, clkp);
res = clk_set_rate(gdp->clk_pix, rate);
if (res < 0) {
DRM_ERROR("Cannot set rate (%dHz) for gdp\n",
rate);
return 1;
}
if (clk_prepare_enable(gdp->clk_pix)) {
DRM_ERROR("Failed to prepare/enable gdp\n");
return 1;
}
}
}
return 0;
}
/**
* sti_gdp_commit
* @plane: gdp plane
*
* Update the NVN field of the 'right' field of the current GDP node (being
* used by the HW) with the address of the updated ('free') top field GDP node.
* - In interlaced mode the 'right' field is the bottom field as we update
* frames starting from their top field
* - In progressive mode, we update both bottom and top fields which are
* equal nodes.
* At the next VSYNC, the updated node list will be used by the HW.
*
* RETURNS:
* 0 on success.
*/
static int sti_gdp_commit(struct sti_plane *plane)
{
struct sti_gdp_node_list *updated_list = sti_gdp_get_free_nodes(plane);
struct sti_gdp_node *updated_top_node = updated_list->top_field;
struct sti_gdp_node *updated_btm_node = updated_list->btm_field;
struct sti_gdp *gdp = to_sti_gdp(plane);
u32 dma_updated_top = updated_list->top_field_paddr;
u32 dma_updated_btm = updated_list->btm_field_paddr;
struct sti_gdp_node_list *curr_list = sti_gdp_get_current_nodes(plane);
dev_dbg(gdp->dev, "%s %s top/btm_node:0x%p/0x%p\n", __func__,
sti_plane_to_str(plane),
updated_top_node, updated_btm_node);
dev_dbg(gdp->dev, "Current NVN:0x%X\n",
readl(gdp->regs + GAM_GDP_NVN_OFFSET));
dev_dbg(gdp->dev, "Posted buff: %lx current buff: %x\n",
(unsigned long)plane->paddr,
readl(gdp->regs + GAM_GDP_PML_OFFSET));
if (curr_list == NULL) {
/* First update or invalid node should directly write in the
* hw register */
DRM_DEBUG_DRIVER("%s first update (or invalid node)",
sti_plane_to_str(plane));
writel(gdp->is_curr_top == true ?
dma_updated_btm : dma_updated_top,
gdp->regs + GAM_GDP_NVN_OFFSET);
return 0;
}
if (plane->mode->flags & DRM_MODE_FLAG_INTERLACE) {
if (gdp->is_curr_top == true) {
/* Do not update in the middle of the frame, but
* postpone the update after the bottom field has
* been displayed */
curr_list->btm_field->gam_gdp_nvn = dma_updated_top;
} else {
/* Direct update to avoid one frame delay */
writel(dma_updated_top,
gdp->regs + GAM_GDP_NVN_OFFSET);
}
} else {
/* Direct update for progressive to avoid one frame delay */
writel(dma_updated_top, gdp->regs + GAM_GDP_NVN_OFFSET);
}
return 0;
}
/**
* sti_gdp_disable
* @plane: gdp plane
* @gdp: gdp pointer
*
* Disable a GDP.
*
* RETURNS:
* 0 on success.
*/
static int sti_gdp_disable(struct sti_plane *plane)
static void sti_gdp_disable(struct sti_gdp *gdp)
{
unsigned int i;
struct sti_gdp *gdp = to_sti_gdp(plane);
struct drm_plane *drm_plane = &gdp->plane.drm_plane;
struct sti_mixer *mixer = to_sti_mixer(drm_plane->crtc);
struct sti_compositor *compo = dev_get_drvdata(gdp->dev);
unsigned int i;
DRM_DEBUG_DRIVER("%s\n", sti_plane_to_str(plane));
DRM_DEBUG_DRIVER("%s\n", sti_plane_to_str(&gdp->plane));
/* Set the nodes as 'to be ignored on mixer' */
for (i = 0; i < GDP_NODE_NB_BANK; i++) {
......@@ -442,14 +253,14 @@ static int sti_gdp_disable(struct sti_plane *plane)
gdp->node_list[i].btm_field->gam_gdp_ppt |= GAM_GDP_PPT_IGNORE;
}
if (sti_vtg_unregister_client(plane->mixer_id == STI_MIXER_MAIN ?
if (sti_vtg_unregister_client(mixer->id == STI_MIXER_MAIN ?
compo->vtg_main : compo->vtg_aux, &gdp->vtg_field_nb))
DRM_DEBUG_DRIVER("Warning: cannot unregister VTG notifier\n");
if (gdp->clk_pix)
clk_disable_unprepare(gdp->clk_pix);
return 0;
gdp->plane.status = STI_PLANE_DISABLED;
}
/**
......@@ -468,6 +279,14 @@ int sti_gdp_field_cb(struct notifier_block *nb,
{
struct sti_gdp *gdp = container_of(nb, struct sti_gdp, vtg_field_nb);
if (gdp->plane.status == STI_PLANE_FLUSHING) {
/* disable need to be synchronize on vsync event */
DRM_DEBUG_DRIVER("Vsync event received => disable %s\n",
sti_plane_to_str(&gdp->plane));
sti_gdp_disable(gdp);
}
switch (event) {
case VTG_TOP_FIELD_EVENT:
gdp->is_curr_top = true;
......@@ -561,18 +380,235 @@ static void sti_gdp_init(struct sti_gdp *gdp)
}
}
static const struct sti_plane_funcs gdp_plane_ops = {
.get_formats = sti_gdp_get_formats,
.get_nb_formats = sti_gdp_get_nb_formats,
.prepare = sti_gdp_prepare,
.commit = sti_gdp_commit,
.disable = sti_gdp_disable,
static void sti_gdp_atomic_update(struct drm_plane *drm_plane,
struct drm_plane_state *oldstate)
{
struct drm_plane_state *state = drm_plane->state;
struct sti_plane *plane = to_sti_plane(drm_plane);
struct sti_gdp *gdp = to_sti_gdp(plane);
struct drm_crtc *crtc = state->crtc;
struct sti_compositor *compo = dev_get_drvdata(gdp->dev);
struct drm_framebuffer *fb = state->fb;
bool first_prepare = plane->status == STI_PLANE_DISABLED ? true : false;
struct sti_mixer *mixer;
struct drm_display_mode *mode;
int dst_x, dst_y, dst_w, dst_h;
int src_x, src_y, src_w, src_h;
struct drm_gem_cma_object *cma_obj;
struct sti_gdp_node_list *list;
struct sti_gdp_node_list *curr_list;
struct sti_gdp_node *top_field, *btm_field;
u32 dma_updated_top;
u32 dma_updated_btm;
int format;
unsigned int depth, bpp;
u32 ydo, xdo, yds, xds;
int res;
/* Manage the case where crtc is null (disabled) */
if (!crtc)
return;
mixer = to_sti_mixer(crtc);
mode = &crtc->mode;
dst_x = state->crtc_x;
dst_y = state->crtc_y;
dst_w = clamp_val(state->crtc_w, 0, mode->crtc_hdisplay - dst_x);
dst_h = clamp_val(state->crtc_h, 0, mode->crtc_vdisplay - dst_y);
/* src_x are in 16.16 format */
src_x = state->src_x >> 16;
src_y = state->src_y >> 16;
src_w = state->src_w >> 16;
src_h = state->src_h >> 16;
DRM_DEBUG_KMS("CRTC:%d (%s) drm plane:%d (%s)\n",
crtc->base.id, sti_mixer_to_str(mixer),
drm_plane->base.id, sti_plane_to_str(plane));
DRM_DEBUG_KMS("%s dst=(%dx%d)@(%d,%d) - src=(%dx%d)@(%d,%d)\n",
sti_plane_to_str(plane),
dst_w, dst_h, dst_x, dst_y,
src_w, src_h, src_x, src_y);
list = sti_gdp_get_free_nodes(gdp);
top_field = list->top_field;
btm_field = list->btm_field;
dev_dbg(gdp->dev, "%s %s top_node:0x%p btm_node:0x%p\n", __func__,
sti_plane_to_str(plane), top_field, btm_field);
/* build the top field */
top_field->gam_gdp_agc = GAM_GDP_AGC_FULL_RANGE;
top_field->gam_gdp_ctl = WAIT_NEXT_VSYNC;
format = sti_gdp_fourcc2format(fb->pixel_format);
if (format == -1) {
DRM_ERROR("Format not supported by GDP %.4s\n",
(char *)&fb->pixel_format);
return;
}
top_field->gam_gdp_ctl |= format;
top_field->gam_gdp_ctl |= sti_gdp_get_alpharange(format);
top_field->gam_gdp_ppt &= ~GAM_GDP_PPT_IGNORE;
cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
if (!cma_obj) {
DRM_ERROR("Can't get CMA GEM object for fb\n");
return;
}
DRM_DEBUG_DRIVER("drm FB:%d format:%.4s phys@:0x%lx\n", fb->base.id,
(char *)&fb->pixel_format,
(unsigned long)cma_obj->paddr);
/* pixel memory location */
drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
top_field->gam_gdp_pml = (u32)cma_obj->paddr + fb->offsets[0];
top_field->gam_gdp_pml += src_x * (bpp >> 3);
top_field->gam_gdp_pml += src_y * fb->pitches[0];
/* input parameters */
top_field->gam_gdp_pmp = fb->pitches[0];
top_field->gam_gdp_size = clamp_val(src_h, 0, GAM_GDP_SIZE_MAX) << 16 |
clamp_val(src_w, 0, GAM_GDP_SIZE_MAX);
/* output parameters */
ydo = sti_vtg_get_line_number(*mode, dst_y);
yds = sti_vtg_get_line_number(*mode, dst_y + dst_h - 1);
xdo = sti_vtg_get_pixel_number(*mode, dst_x);
xds = sti_vtg_get_pixel_number(*mode, dst_x + dst_w - 1);
top_field->gam_gdp_vpo = (ydo << 16) | xdo;
top_field->gam_gdp_vps = (yds << 16) | xds;
/* Same content and chained together */
memcpy(btm_field, top_field, sizeof(*btm_field));
top_field->gam_gdp_nvn = list->btm_field_paddr;
btm_field->gam_gdp_nvn = list->top_field_paddr;
/* Interlaced mode */
if (mode->flags & DRM_MODE_FLAG_INTERLACE)
btm_field->gam_gdp_pml = top_field->gam_gdp_pml +
fb->pitches[0];
if (first_prepare) {
/* Register gdp callback */
if (sti_vtg_register_client(mixer->id == STI_MIXER_MAIN ?
compo->vtg_main : compo->vtg_aux,
&gdp->vtg_field_nb, mixer->id)) {
DRM_ERROR("Cannot register VTG notifier\n");
return;
}
/* Set and enable gdp clock */
if (gdp->clk_pix) {
struct clk *clkp;
int rate = mode->clock * 1000;
/* According to the mixer used, the gdp pixel clock
* should have a different parent clock. */
if (mixer->id == STI_MIXER_MAIN)
clkp = gdp->clk_main_parent;
else
clkp = gdp->clk_aux_parent;
if (clkp)
clk_set_parent(gdp->clk_pix, clkp);
res = clk_set_rate(gdp->clk_pix, rate);
if (res < 0) {
DRM_ERROR("Cannot set rate (%dHz) for gdp\n",
rate);
return;
}
if (clk_prepare_enable(gdp->clk_pix)) {
DRM_ERROR("Failed to prepare/enable gdp\n");
return;
}
}
}
/* Update the NVN field of the 'right' field of the current GDP node
* (being used by the HW) with the address of the updated ('free') top
* field GDP node.
* - In interlaced mode the 'right' field is the bottom field as we
* update frames starting from their top field
* - In progressive mode, we update both bottom and top fields which
* are equal nodes.
* At the next VSYNC, the updated node list will be used by the HW.
*/
curr_list = sti_gdp_get_current_nodes(gdp);
dma_updated_top = list->top_field_paddr;
dma_updated_btm = list->btm_field_paddr;
dev_dbg(gdp->dev, "Current NVN:0x%X\n",
readl(gdp->regs + GAM_GDP_NVN_OFFSET));
dev_dbg(gdp->dev, "Posted buff: %lx current buff: %x\n",
(unsigned long)cma_obj->paddr,
readl(gdp->regs + GAM_GDP_PML_OFFSET));
if (!curr_list) {
/* First update or invalid node should directly write in the
* hw register */
DRM_DEBUG_DRIVER("%s first update (or invalid node)",
sti_plane_to_str(plane));
writel(gdp->is_curr_top ?
dma_updated_btm : dma_updated_top,
gdp->regs + GAM_GDP_NVN_OFFSET);
goto end;
}
if (mode->flags & DRM_MODE_FLAG_INTERLACE) {
if (gdp->is_curr_top) {
/* Do not update in the middle of the frame, but
* postpone the update after the bottom field has
* been displayed */
curr_list->btm_field->gam_gdp_nvn = dma_updated_top;
} else {
/* Direct update to avoid one frame delay */
writel(dma_updated_top,
gdp->regs + GAM_GDP_NVN_OFFSET);
}
} else {
/* Direct update for progressive to avoid one frame delay */
writel(dma_updated_top, gdp->regs + GAM_GDP_NVN_OFFSET);
}
end:
plane->status = STI_PLANE_UPDATED;
}
static void sti_gdp_atomic_disable(struct drm_plane *drm_plane,
struct drm_plane_state *oldstate)
{
struct sti_plane *plane = to_sti_plane(drm_plane);
struct sti_mixer *mixer = to_sti_mixer(drm_plane->crtc);
if (!drm_plane->crtc) {
DRM_DEBUG_DRIVER("drm plane:%d not enabled\n",
drm_plane->base.id);
return;
}
DRM_DEBUG_DRIVER("CRTC:%d (%s) drm plane:%d (%s)\n",
drm_plane->crtc->base.id, sti_mixer_to_str(mixer),
drm_plane->base.id, sti_plane_to_str(plane));
plane->status = STI_PLANE_DISABLING;
}
static const struct drm_plane_helper_funcs sti_gdp_helpers_funcs = {
.atomic_update = sti_gdp_atomic_update,
.atomic_disable = sti_gdp_atomic_disable,
};
struct sti_plane *sti_gdp_create(struct device *dev, int desc,
void __iomem *baseaddr)
struct drm_plane *sti_gdp_create(struct drm_device *drm_dev,
struct device *dev, int desc,
void __iomem *baseaddr,
unsigned int possible_crtcs,
enum drm_plane_type type)
{
struct sti_gdp *gdp;
int res;
gdp = devm_kzalloc(dev, sizeof(*gdp), GFP_KERNEL);
if (!gdp) {
......@@ -583,11 +619,30 @@ struct sti_plane *sti_gdp_create(struct device *dev, int desc,
gdp->dev = dev;
gdp->regs = baseaddr;
gdp->plane.desc = desc;
gdp->plane.ops = &gdp_plane_ops;
gdp->plane.status = STI_PLANE_DISABLED;
gdp->vtg_field_nb.notifier_call = sti_gdp_field_cb;
sti_gdp_init(gdp);
return &gdp->plane;
res = drm_universal_plane_init(drm_dev, &gdp->plane.drm_plane,
possible_crtcs,
&sti_plane_helpers_funcs,
gdp_supported_formats,
ARRAY_SIZE(gdp_supported_formats),
type);
if (res) {
DRM_ERROR("Failed to initialize universal plane\n");
goto err;
}
drm_plane_helper_add(&gdp->plane.drm_plane, &sti_gdp_helpers_funcs);
sti_plane_init_property(&gdp->plane, type);
return &gdp->plane.drm_plane;
err:
devm_kfree(dev, gdp);
return NULL;
}
......@@ -11,7 +11,9 @@
#include <linux/types.h>
struct sti_plane *sti_gdp_create(struct device *dev, int desc,
void __iomem *baseaddr);
struct drm_plane *sti_gdp_create(struct drm_device *drm_dev,
struct device *dev, int desc,
void __iomem *baseaddr,
unsigned int possible_crtcs,
enum drm_plane_type type);
#endif
......@@ -12,7 +12,10 @@
#include <linux/reset.h>
#include <drm/drmP.h>
#include <drm/drm_fb_cma_helper.h>
#include <drm/drm_gem_cma_helper.h>
#include "sti_compositor.h"
#include "sti_hqvdp_lut.h"
#include "sti_plane.h"
#include "sti_vtg.h"
......@@ -357,16 +360,6 @@ static const uint32_t hqvdp_supported_formats[] = {
DRM_FORMAT_NV12,
};
static const uint32_t *sti_hqvdp_get_formats(struct sti_plane *plane)
{
return hqvdp_supported_formats;
}
static unsigned int sti_hqvdp_get_nb_formats(struct sti_plane *plane)
{
return ARRAY_SIZE(hqvdp_supported_formats);
}
/**
* sti_hqvdp_get_free_cmd
* @hqvdp: hqvdp structure
......@@ -482,7 +475,12 @@ static void sti_hqvdp_update_hvsrc(enum sti_hvsrc_orient orient, int scale,
/**
* sti_hqvdp_check_hw_scaling
* @plane: hqvdp plane
* @hqvdp: hqvdp pointer
* @mode: display mode with timing constraints
* @src_w: source width
* @src_h: source height
* @dst_w: destination width
* @dst_h: destination height
*
* Check if the HW is able to perform the scaling request
* The firmware scaling limitation is "CEIL(1/Zy) <= FLOOR(LFW)" where:
......@@ -496,194 +494,36 @@ static void sti_hqvdp_update_hvsrc(enum sti_hvsrc_orient orient, int scale,
* RETURNS:
* True if the HW can scale.
*/
static bool sti_hqvdp_check_hw_scaling(struct sti_plane *plane)
static bool sti_hqvdp_check_hw_scaling(struct sti_hqvdp *hqvdp,
struct drm_display_mode *mode,
int src_w, int src_h,
int dst_w, int dst_h)
{
struct sti_hqvdp *hqvdp = to_sti_hqvdp(plane);
unsigned long lfw;
unsigned int inv_zy;
lfw = plane->mode->htotal * (clk_get_rate(hqvdp->clk) / 1000000);
lfw /= max(plane->src_w, plane->dst_w) * plane->mode->clock / 1000;
lfw = mode->htotal * (clk_get_rate(hqvdp->clk) / 1000000);
lfw /= max(src_w, dst_w) * mode->clock / 1000;
inv_zy = DIV_ROUND_UP(plane->src_h, plane->dst_h);
inv_zy = DIV_ROUND_UP(src_h, dst_h);
return (inv_zy <= lfw) ? true : false;
}
/**
* sti_hqvdp_prepare
* @plane: hqvdp plane
* @first_prepare: true if it is the first time this function is called
*
* Prepares a command for the firmware
*
* RETURNS:
* 0 on success.
*/
static int sti_hqvdp_prepare(struct sti_plane *plane, bool first_prepare)
{
struct sti_hqvdp *hqvdp = to_sti_hqvdp(plane);
struct sti_hqvdp_cmd *cmd;
int scale_h, scale_v;
int cmd_offset;
dev_dbg(hqvdp->dev, "%s %s\n", __func__, sti_plane_to_str(plane));
cmd_offset = sti_hqvdp_get_free_cmd(hqvdp);
if (cmd_offset == -1) {
DRM_ERROR("No available hqvdp_cmd now\n");
return -EBUSY;
}
cmd = hqvdp->hqvdp_cmd + cmd_offset;
if (!sti_hqvdp_check_hw_scaling(plane)) {
DRM_ERROR("Scaling beyond HW capabilities\n");
return -EINVAL;
}
/* Static parameters, defaulting to progressive mode */
cmd->top.config = TOP_CONFIG_PROGRESSIVE;
cmd->top.mem_format = TOP_MEM_FORMAT_DFLT;
cmd->hvsrc.param_ctrl = HVSRC_PARAM_CTRL_DFLT;
cmd->csdi.config = CSDI_CONFIG_PROG;
/* VC1RE, FMD bypassed : keep everything set to 0
* IQI/P2I bypassed */
cmd->iqi.config = IQI_CONFIG_DFLT;
cmd->iqi.con_bri = IQI_CON_BRI_DFLT;
cmd->iqi.sat_gain = IQI_SAT_GAIN_DFLT;
cmd->iqi.pxf_conf = IQI_PXF_CONF_DFLT;
/* Buffer planes address */
cmd->top.current_luma = (u32)plane->paddr + plane->offsets[0];
cmd->top.current_chroma = (u32)plane->paddr + plane->offsets[1];
/* Pitches */
cmd->top.luma_processed_pitch = cmd->top.luma_src_pitch =
plane->pitches[0];
cmd->top.chroma_processed_pitch = cmd->top.chroma_src_pitch =
plane->pitches[1];
/* Input / output size
* Align to upper even value */
plane->dst_w = ALIGN(plane->dst_w, 2);
plane->dst_h = ALIGN(plane->dst_h, 2);
if ((plane->src_w > MAX_WIDTH) || (plane->src_w < MIN_WIDTH) ||
(plane->src_h > MAX_HEIGHT) || (plane->src_h < MIN_HEIGHT) ||
(plane->dst_w > MAX_WIDTH) || (plane->dst_w < MIN_WIDTH) ||
(plane->dst_h > MAX_HEIGHT) || (plane->dst_h < MIN_HEIGHT)) {
DRM_ERROR("Invalid in/out size %dx%d -> %dx%d\n",
plane->src_w, plane->src_h,
plane->dst_w, plane->dst_h);
return -EINVAL;
}
cmd->top.input_viewport_size = cmd->top.input_frame_size =
plane->src_h << 16 | plane->src_w;
cmd->hvsrc.output_picture_size = plane->dst_h << 16 | plane->dst_w;
cmd->top.input_viewport_ori = plane->src_y << 16 | plane->src_x;
/* Handle interlaced */
if (plane->fb->flags & DRM_MODE_FB_INTERLACED) {
/* Top field to display */
cmd->top.config = TOP_CONFIG_INTER_TOP;
/* Update pitches and vert size */
cmd->top.input_frame_size = (plane->src_h / 2) << 16 |
plane->src_w;
cmd->top.luma_processed_pitch *= 2;
cmd->top.luma_src_pitch *= 2;
cmd->top.chroma_processed_pitch *= 2;
cmd->top.chroma_src_pitch *= 2;
/* Enable directional deinterlacing processing */
cmd->csdi.config = CSDI_CONFIG_INTER_DIR;
cmd->csdi.config2 = CSDI_CONFIG2_DFLT;
cmd->csdi.dcdi_config = CSDI_DCDI_CONFIG_DFLT;
}
/* Update hvsrc lut coef */
scale_h = SCALE_FACTOR * plane->dst_w / plane->src_w;
sti_hqvdp_update_hvsrc(HVSRC_HORI, scale_h, &cmd->hvsrc);
scale_v = SCALE_FACTOR * plane->dst_h / plane->src_h;
sti_hqvdp_update_hvsrc(HVSRC_VERT, scale_v, &cmd->hvsrc);
if (first_prepare) {
/* Prevent VTG shutdown */
if (clk_prepare_enable(hqvdp->clk_pix_main)) {
DRM_ERROR("Failed to prepare/enable pix main clk\n");
return -ENXIO;
}
/* Register VTG Vsync callback to handle bottom fields */
if ((plane->fb->flags & DRM_MODE_FB_INTERLACED) &&
sti_vtg_register_client(hqvdp->vtg, &hqvdp->vtg_nb,
plane->mixer_id)) {
DRM_ERROR("Cannot register VTG notifier\n");
return -ENXIO;
}
}
return 0;
}
/**
* sti_hqvdp_commit
* @plane: hqvdp plane
*
* Enables the HQVDP plane
*
* RETURNS:
* 0 on success.
*/
static int sti_hqvdp_commit(struct sti_plane *plane)
{
struct sti_hqvdp *hqvdp = to_sti_hqvdp(plane);
int cmd_offset;
dev_dbg(hqvdp->dev, "%s %s\n", __func__, sti_plane_to_str(plane));
cmd_offset = sti_hqvdp_get_free_cmd(hqvdp);
if (cmd_offset == -1) {
DRM_ERROR("No available hqvdp_cmd now\n");
return -EBUSY;
}
writel(hqvdp->hqvdp_cmd_paddr + cmd_offset,
hqvdp->regs + HQVDP_MBX_NEXT_CMD);
hqvdp->curr_field_count++;
/* Interlaced : get ready to display the bottom field at next Vsync */
if (plane->fb->flags & DRM_MODE_FB_INTERLACED)
hqvdp->btm_field_pending = true;
dev_dbg(hqvdp->dev, "%s Posted command:0x%x\n",
__func__, hqvdp->hqvdp_cmd_paddr + cmd_offset);
return 0;
}
/**
* sti_hqvdp_disable
* @plane: hqvdp plane
* @hqvdp: hqvdp pointer
*
* Disables the HQVDP plane
*
* RETURNS:
* 0 on success.
*/
static int sti_hqvdp_disable(struct sti_plane *plane)
static void sti_hqvdp_disable(struct sti_hqvdp *hqvdp)
{
struct sti_hqvdp *hqvdp = to_sti_hqvdp(plane);
int i;
DRM_DEBUG_DRIVER("%s\n", sti_plane_to_str(plane));
DRM_DEBUG_DRIVER("%s\n", sti_plane_to_str(&hqvdp->plane));
/* Unregister VTG Vsync callback */
if ((plane->fb->flags & DRM_MODE_FB_INTERLACED) &&
sti_vtg_unregister_client(hqvdp->vtg, &hqvdp->vtg_nb))
if (sti_vtg_unregister_client(hqvdp->vtg, &hqvdp->vtg_nb))
DRM_DEBUG_DRIVER("Warning: cannot unregister VTG notifier\n");
/* Set next cmd to NULL */
......@@ -699,12 +539,10 @@ static int sti_hqvdp_disable(struct sti_plane *plane)
/* VTG can stop now */
clk_disable_unprepare(hqvdp->clk_pix_main);
if (i == POLL_MAX_ATTEMPT) {
if (i == POLL_MAX_ATTEMPT)
DRM_ERROR("XP70 could not revert to idle\n");
return -ENXIO;
}
return 0;
hqvdp->plane.status = STI_PLANE_DISABLED;
}
/**
......@@ -729,6 +567,14 @@ int sti_hqvdp_vtg_cb(struct notifier_block *nb, unsigned long evt, void *data)
return 0;
}
if (hqvdp->plane.status == STI_PLANE_FLUSHING) {
/* disable need to be synchronize on vsync event */
DRM_DEBUG_DRIVER("Vsync event received => disable %s\n",
sti_plane_to_str(&hqvdp->plane));
sti_hqvdp_disable(hqvdp);
}
if (hqvdp->btm_field_pending) {
/* Create the btm field command from the current one */
btm_cmd_offset = sti_hqvdp_get_free_cmd(hqvdp);
......@@ -782,24 +628,212 @@ static void sti_hqvdp_init(struct sti_hqvdp *hqvdp)
memset(hqvdp->hqvdp_cmd, 0, size);
}
static const struct sti_plane_funcs hqvdp_plane_ops = {
.get_formats = sti_hqvdp_get_formats,
.get_nb_formats = sti_hqvdp_get_nb_formats,
.prepare = sti_hqvdp_prepare,
.commit = sti_hqvdp_commit,
.disable = sti_hqvdp_disable,
static void sti_hqvdp_atomic_update(struct drm_plane *drm_plane,
struct drm_plane_state *oldstate)
{
struct drm_plane_state *state = drm_plane->state;
struct sti_plane *plane = to_sti_plane(drm_plane);
struct sti_hqvdp *hqvdp = to_sti_hqvdp(plane);
struct drm_crtc *crtc = state->crtc;
struct sti_mixer *mixer = to_sti_mixer(crtc);
struct drm_framebuffer *fb = state->fb;
struct drm_display_mode *mode = &crtc->mode;
int dst_x = state->crtc_x;
int dst_y = state->crtc_y;
int dst_w = clamp_val(state->crtc_w, 0, mode->crtc_hdisplay - dst_x);
int dst_h = clamp_val(state->crtc_h, 0, mode->crtc_vdisplay - dst_y);
/* src_x are in 16.16 format */
int src_x = state->src_x >> 16;
int src_y = state->src_y >> 16;
int src_w = state->src_w >> 16;
int src_h = state->src_h >> 16;
bool first_prepare = plane->status == STI_PLANE_DISABLED ? true : false;
struct drm_gem_cma_object *cma_obj;
struct sti_hqvdp_cmd *cmd;
int scale_h, scale_v;
int cmd_offset;
DRM_DEBUG_KMS("CRTC:%d (%s) drm plane:%d (%s)\n",
crtc->base.id, sti_mixer_to_str(mixer),
drm_plane->base.id, sti_plane_to_str(plane));
DRM_DEBUG_KMS("%s dst=(%dx%d)@(%d,%d) - src=(%dx%d)@(%d,%d)\n",
sti_plane_to_str(plane),
dst_w, dst_h, dst_x, dst_y,
src_w, src_h, src_x, src_y);
cmd_offset = sti_hqvdp_get_free_cmd(hqvdp);
if (cmd_offset == -1) {
DRM_ERROR("No available hqvdp_cmd now\n");
return;
}
cmd = hqvdp->hqvdp_cmd + cmd_offset;
if (!sti_hqvdp_check_hw_scaling(hqvdp, mode,
src_w, src_h,
dst_w, dst_h)) {
DRM_ERROR("Scaling beyond HW capabilities\n");
return;
}
/* Static parameters, defaulting to progressive mode */
cmd->top.config = TOP_CONFIG_PROGRESSIVE;
cmd->top.mem_format = TOP_MEM_FORMAT_DFLT;
cmd->hvsrc.param_ctrl = HVSRC_PARAM_CTRL_DFLT;
cmd->csdi.config = CSDI_CONFIG_PROG;
/* VC1RE, FMD bypassed : keep everything set to 0
* IQI/P2I bypassed */
cmd->iqi.config = IQI_CONFIG_DFLT;
cmd->iqi.con_bri = IQI_CON_BRI_DFLT;
cmd->iqi.sat_gain = IQI_SAT_GAIN_DFLT;
cmd->iqi.pxf_conf = IQI_PXF_CONF_DFLT;
cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
if (!cma_obj) {
DRM_ERROR("Can't get CMA GEM object for fb\n");
return;
}
DRM_DEBUG_DRIVER("drm FB:%d format:%.4s phys@:0x%lx\n", fb->base.id,
(char *)&fb->pixel_format,
(unsigned long)cma_obj->paddr);
/* Buffer planes address */
cmd->top.current_luma = (u32)cma_obj->paddr + fb->offsets[0];
cmd->top.current_chroma = (u32)cma_obj->paddr + fb->offsets[1];
/* Pitches */
cmd->top.luma_processed_pitch = fb->pitches[0];
cmd->top.luma_src_pitch = fb->pitches[0];
cmd->top.chroma_processed_pitch = fb->pitches[1];
cmd->top.chroma_src_pitch = fb->pitches[1];
/* Input / output size
* Align to upper even value */
dst_w = ALIGN(dst_w, 2);
dst_h = ALIGN(dst_h, 2);
if ((src_w > MAX_WIDTH) || (src_w < MIN_WIDTH) ||
(src_h > MAX_HEIGHT) || (src_h < MIN_HEIGHT) ||
(dst_w > MAX_WIDTH) || (dst_w < MIN_WIDTH) ||
(dst_h > MAX_HEIGHT) || (dst_h < MIN_HEIGHT)) {
DRM_ERROR("Invalid in/out size %dx%d -> %dx%d\n",
src_w, src_h,
dst_w, dst_h);
return;
}
cmd->top.input_viewport_size = src_h << 16 | src_w;
cmd->top.input_frame_size = src_h << 16 | src_w;
cmd->hvsrc.output_picture_size = dst_h << 16 | dst_w;
cmd->top.input_viewport_ori = src_y << 16 | src_x;
/* Handle interlaced */
if (fb->flags & DRM_MODE_FB_INTERLACED) {
/* Top field to display */
cmd->top.config = TOP_CONFIG_INTER_TOP;
/* Update pitches and vert size */
cmd->top.input_frame_size = (src_h / 2) << 16 | src_w;
cmd->top.luma_processed_pitch *= 2;
cmd->top.luma_src_pitch *= 2;
cmd->top.chroma_processed_pitch *= 2;
cmd->top.chroma_src_pitch *= 2;
/* Enable directional deinterlacing processing */
cmd->csdi.config = CSDI_CONFIG_INTER_DIR;
cmd->csdi.config2 = CSDI_CONFIG2_DFLT;
cmd->csdi.dcdi_config = CSDI_DCDI_CONFIG_DFLT;
}
/* Update hvsrc lut coef */
scale_h = SCALE_FACTOR * dst_w / src_w;
sti_hqvdp_update_hvsrc(HVSRC_HORI, scale_h, &cmd->hvsrc);
scale_v = SCALE_FACTOR * dst_h / src_h;
sti_hqvdp_update_hvsrc(HVSRC_VERT, scale_v, &cmd->hvsrc);
if (first_prepare) {
/* Prevent VTG shutdown */
if (clk_prepare_enable(hqvdp->clk_pix_main)) {
DRM_ERROR("Failed to prepare/enable pix main clk\n");
return;
}
/* Register VTG Vsync callback to handle bottom fields */
if (sti_vtg_register_client(hqvdp->vtg,
&hqvdp->vtg_nb,
mixer->id)) {
DRM_ERROR("Cannot register VTG notifier\n");
return;
}
}
writel(hqvdp->hqvdp_cmd_paddr + cmd_offset,
hqvdp->regs + HQVDP_MBX_NEXT_CMD);
hqvdp->curr_field_count++;
/* Interlaced : get ready to display the bottom field at next Vsync */
if (fb->flags & DRM_MODE_FB_INTERLACED)
hqvdp->btm_field_pending = true;
dev_dbg(hqvdp->dev, "%s Posted command:0x%x\n",
__func__, hqvdp->hqvdp_cmd_paddr + cmd_offset);
plane->status = STI_PLANE_UPDATED;
}
static void sti_hqvdp_atomic_disable(struct drm_plane *drm_plane,
struct drm_plane_state *oldstate)
{
struct sti_plane *plane = to_sti_plane(drm_plane);
struct sti_mixer *mixer = to_sti_mixer(drm_plane->crtc);
if (!drm_plane->crtc) {
DRM_DEBUG_DRIVER("drm plane:%d not enabled\n",
drm_plane->base.id);
return;
}
DRM_DEBUG_DRIVER("CRTC:%d (%s) drm plane:%d (%s)\n",
drm_plane->crtc->base.id, sti_mixer_to_str(mixer),
drm_plane->base.id, sti_plane_to_str(plane));
plane->status = STI_PLANE_DISABLING;
}
static const struct drm_plane_helper_funcs sti_hqvdp_helpers_funcs = {
.atomic_update = sti_hqvdp_atomic_update,
.atomic_disable = sti_hqvdp_atomic_disable,
};
struct sti_plane *sti_hqvdp_create(struct device *dev, int desc)
static struct drm_plane *sti_hqvdp_create(struct drm_device *drm_dev,
struct device *dev, int desc)
{
struct sti_hqvdp *hqvdp = dev_get_drvdata(dev);
int res;
hqvdp->plane.desc = desc;
hqvdp->plane.ops = &hqvdp_plane_ops;
hqvdp->plane.status = STI_PLANE_DISABLED;
sti_hqvdp_init(hqvdp);
return &hqvdp->plane;
res = drm_universal_plane_init(drm_dev, &hqvdp->plane.drm_plane, 1,
&sti_plane_helpers_funcs,
hqvdp_supported_formats,
ARRAY_SIZE(hqvdp_supported_formats),
DRM_PLANE_TYPE_OVERLAY);
if (res) {
DRM_ERROR("Failed to initialize universal plane\n");
return NULL;
}
drm_plane_helper_add(&hqvdp->plane.drm_plane, &sti_hqvdp_helpers_funcs);
sti_plane_init_property(&hqvdp->plane, DRM_PLANE_TYPE_OVERLAY);
return &hqvdp->plane.drm_plane;
}
static void sti_hqvdp_init_plugs(struct sti_hqvdp *hqvdp)
......@@ -948,7 +982,7 @@ int sti_hqvdp_bind(struct device *dev, struct device *master, void *data)
{
struct sti_hqvdp *hqvdp = dev_get_drvdata(dev);
struct drm_device *drm_dev = data;
struct sti_plane *plane;
struct drm_plane *plane;
int err;
DRM_DEBUG_DRIVER("\n");
......@@ -965,11 +999,8 @@ int sti_hqvdp_bind(struct device *dev, struct device *master, void *data)
}
/* Create HQVDP plane once xp70 is initialized */
plane = sti_hqvdp_create(hqvdp->dev, STI_HQVDP_0);
if (plane)
sti_plane_init(hqvdp->drm_dev, plane, 1,
DRM_PLANE_TYPE_OVERLAY);
else
plane = sti_hqvdp_create(drm_dev, hqvdp->dev, STI_HQVDP_0);
if (!plane)
DRM_ERROR("Can't create HQVDP plane\n");
return 0;
......
......@@ -58,6 +58,7 @@ const char *sti_mixer_to_str(struct sti_mixer *mixer)
return "<UNKNOWN MIXER>";
}
}
EXPORT_SYMBOL(sti_mixer_to_str);
static inline u32 sti_mixer_reg_read(struct sti_mixer *mixer, u32 reg_id)
{
......@@ -225,15 +226,6 @@ int sti_mixer_set_plane_status(struct sti_mixer *mixer,
return 0;
}
void sti_mixer_clear_all_planes(struct sti_mixer *mixer)
{
u32 val;
DRM_DEBUG_DRIVER("%s clear all planes\n", sti_mixer_to_str(mixer));
val = sti_mixer_reg_read(mixer, GAM_MIXER_CTL) & 0xFFFF0000;
sti_mixer_reg_write(mixer, GAM_MIXER_CTL, val);
}
void sti_mixer_set_matrix(struct sti_mixer *mixer)
{
unsigned int i;
......
......@@ -15,6 +15,12 @@
#define to_sti_mixer(x) container_of(x, struct sti_mixer, drm_crtc)
enum sti_mixer_status {
STI_MIXER_READY,
STI_MIXER_DISABLING,
STI_MIXER_DISABLED,
};
/**
* STI Mixer subdevice structure
*
......@@ -23,7 +29,7 @@
* @id: id of the mixer
* @drm_crtc: crtc object link to the mixer
* @pending_event: set if a flip event is pending on crtc
* @enabled: to know if the mixer is active or not
* @status: to know the status of the mixer
*/
struct sti_mixer {
struct device *dev;
......@@ -31,7 +37,7 @@ struct sti_mixer {
int id;
struct drm_crtc drm_crtc;
struct drm_pending_vblank_event *pending_event;
bool enabled;
enum sti_mixer_status status;
};
const char *sti_mixer_to_str(struct sti_mixer *mixer);
......@@ -41,7 +47,6 @@ struct sti_mixer *sti_mixer_create(struct device *dev, int id,
int sti_mixer_set_plane_status(struct sti_mixer *mixer,
struct sti_plane *plane, bool status);
void sti_mixer_clear_all_planes(struct sti_mixer *mixer);
int sti_mixer_set_plane_depth(struct sti_mixer *mixer, struct sti_plane *plane);
int sti_mixer_active_video_area(struct sti_mixer *mixer,
struct drm_display_mode *mode);
......
......@@ -7,15 +7,12 @@
*/
#include <drm/drmP.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_fb_cma_helper.h>
#include <drm/drm_plane_helper.h>
#include <drm/drm_gem_cma_helper.h>
#include "sti_compositor.h"
#include "sti_drv.h"
#include "sti_plane.h"
#include "sti_vtg.h"
/* (Background) < GDP0 < GDP1 < HQVDP0 < GDP2 < GDP3 < (ForeGround) */
enum sti_plane_desc sti_plane_default_zorder[] = {
......@@ -47,115 +44,6 @@ const char *sti_plane_to_str(struct sti_plane *plane)
}
EXPORT_SYMBOL(sti_plane_to_str);
static int sti_plane_prepare(struct sti_plane *plane,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_display_mode *mode, int mixer_id,
int dest_x, int dest_y, int dest_w, int dest_h,
int src_x, int src_y, int src_w, int src_h)
{
struct drm_gem_cma_object *cma_obj;
unsigned int i;
int res;
if (!plane || !fb || !mode) {
DRM_ERROR("Null fb, plane or mode\n");
return 1;
}
cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
if (!cma_obj) {
DRM_ERROR("Can't get CMA GEM object for fb\n");
return 1;
}
plane->fb = fb;
plane->mode = mode;
plane->mixer_id = mixer_id;
plane->dst_x = dest_x;
plane->dst_y = dest_y;
plane->dst_w = clamp_val(dest_w, 0, mode->crtc_hdisplay - dest_x);
plane->dst_h = clamp_val(dest_h, 0, mode->crtc_vdisplay - dest_y);
plane->src_x = src_x;
plane->src_y = src_y;
plane->src_w = src_w;
plane->src_h = src_h;
plane->format = fb->pixel_format;
plane->vaddr = cma_obj->vaddr;
plane->paddr = cma_obj->paddr;
for (i = 0; i < 4; i++) {
plane->pitches[i] = fb->pitches[i];
plane->offsets[i] = fb->offsets[i];
}
DRM_DEBUG_DRIVER("%s is associated with mixer_id %d\n",
sti_plane_to_str(plane),
plane->mixer_id);
DRM_DEBUG_DRIVER("%s dst=(%dx%d)@(%d,%d) - src=(%dx%d)@(%d,%d)\n",
sti_plane_to_str(plane),
plane->dst_w, plane->dst_h, plane->dst_x, plane->dst_y,
plane->src_w, plane->src_h, plane->src_x,
plane->src_y);
DRM_DEBUG_DRIVER("drm FB:%d format:%.4s phys@:0x%lx\n", fb->base.id,
(char *)&plane->format, (unsigned long)plane->paddr);
if (!plane->ops->prepare) {
DRM_ERROR("Cannot prepare\n");
return 1;
}
res = plane->ops->prepare(plane, !plane->enabled);
if (res) {
DRM_ERROR("Plane prepare failed\n");
return res;
}
plane->enabled = true;
return 0;
}
static int sti_plane_commit(struct sti_plane *plane)
{
if (!plane)
return 1;
if (!plane->ops->commit) {
DRM_ERROR("Cannot commit\n");
return 1;
}
return plane->ops->commit(plane);
}
static int sti_plane_disable(struct sti_plane *plane)
{
int res;
DRM_DEBUG_DRIVER("%s\n", sti_plane_to_str(plane));
if (!plane)
return 1;
if (!plane->enabled)
return 0;
if (!plane->ops->disable) {
DRM_ERROR("Cannot disable\n");
return 1;
}
res = plane->ops->disable(plane);
if (res) {
DRM_ERROR("Plane disable failed\n");
return res;
}
plane->enabled = false;
return 0;
}
static void sti_plane_destroy(struct drm_plane *drm_plane)
{
DRM_DEBUG_DRIVER("\n");
......@@ -182,109 +70,6 @@ static int sti_plane_set_property(struct drm_plane *drm_plane,
return -EINVAL;
}
static struct drm_plane_funcs sti_plane_funcs = {
.update_plane = drm_atomic_helper_update_plane,
.disable_plane = drm_atomic_helper_disable_plane,
.destroy = sti_plane_destroy,
.set_property = sti_plane_set_property,
.reset = drm_atomic_helper_plane_reset,
.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
};
static int sti_plane_atomic_check(struct drm_plane *drm_plane,
struct drm_plane_state *state)
{
return 0;
}
static void sti_plane_atomic_update(struct drm_plane *drm_plane,
struct drm_plane_state *oldstate)
{
struct drm_plane_state *state = drm_plane->state;
struct sti_plane *plane = to_sti_plane(drm_plane);
struct sti_mixer *mixer = to_sti_mixer(state->crtc);
int res;
DRM_DEBUG_KMS("CRTC:%d (%s) drm plane:%d (%s)\n",
state->crtc->base.id, sti_mixer_to_str(mixer),
drm_plane->base.id, sti_plane_to_str(plane));
DRM_DEBUG_KMS("(%dx%d)@(%d,%d)\n",
state->crtc_w, state->crtc_h,
state->crtc_x, state->crtc_y);
res = sti_mixer_set_plane_depth(mixer, plane);
if (res) {
DRM_ERROR("Cannot set plane depth\n");
return;
}
/* src_x are in 16.16 format */
res = sti_plane_prepare(plane, state->crtc, state->fb,
&state->crtc->mode, mixer->id,
state->crtc_x, state->crtc_y,
state->crtc_w, state->crtc_h,
state->src_x >> 16, state->src_y >> 16,
state->src_w >> 16, state->src_h >> 16);
if (res) {
DRM_ERROR("Plane prepare failed\n");
return;
}
res = sti_plane_commit(plane);
if (res) {
DRM_ERROR("Plane commit failed\n");
return;
}
res = sti_mixer_set_plane_status(mixer, plane, true);
if (res) {
DRM_ERROR("Cannot enable plane at mixer\n");
return;
}
}
static void sti_plane_atomic_disable(struct drm_plane *drm_plane,
struct drm_plane_state *oldstate)
{
struct sti_plane *plane = to_sti_plane(drm_plane);
struct sti_mixer *mixer = to_sti_mixer(drm_plane->crtc);
int res;
if (!drm_plane->crtc) {
DRM_DEBUG_DRIVER("drm plane:%d not enabled\n",
drm_plane->base.id);
return;
}
DRM_DEBUG_DRIVER("CRTC:%d (%s) drm plane:%d (%s)\n",
drm_plane->crtc->base.id, sti_mixer_to_str(mixer),
drm_plane->base.id, sti_plane_to_str(plane));
/* Disable plane at mixer level */
res = sti_mixer_set_plane_status(mixer, plane, false);
if (res) {
DRM_ERROR("Cannot disable plane at mixer\n");
return;
}
/* Wait a while to be sure that a Vsync event is received */
msleep(WAIT_NEXT_VSYNC_MS);
/* Then disable plane itself */
res = sti_plane_disable(plane);
if (res) {
DRM_ERROR("Plane disable failed\n");
return;
}
}
static const struct drm_plane_helper_funcs sti_plane_helpers_funcs = {
.atomic_check = sti_plane_atomic_check,
.atomic_update = sti_plane_atomic_update,
.atomic_disable = sti_plane_atomic_disable,
};
static void sti_plane_attach_zorder_property(struct drm_plane *drm_plane)
{
struct drm_device *dev = drm_plane->dev;
......@@ -305,25 +90,10 @@ static void sti_plane_attach_zorder_property(struct drm_plane *drm_plane)
drm_object_attach_property(&drm_plane->base, prop, plane->zorder);
}
struct drm_plane *sti_plane_init(struct drm_device *dev,
struct sti_plane *plane,
unsigned int possible_crtcs,
enum drm_plane_type type)
void sti_plane_init_property(struct sti_plane *plane,
enum drm_plane_type type)
{
int err, i;
err = drm_universal_plane_init(dev, &plane->drm_plane,
possible_crtcs,
&sti_plane_funcs,
plane->ops->get_formats(plane),
plane->ops->get_nb_formats(plane),
type);
if (err) {
DRM_ERROR("Failed to initialize universal plane\n");
return NULL;
}
drm_plane_helper_add(&plane->drm_plane, &sti_plane_helpers_funcs);
unsigned int i;
for (i = 0; i < ARRAY_SIZE(sti_plane_default_zorder); i++)
if (sti_plane_default_zorder[i] == plane->desc)
......@@ -337,7 +107,16 @@ struct drm_plane *sti_plane_init(struct drm_device *dev,
DRM_DEBUG_DRIVER("drm plane:%d mapped to %s with zorder:%d\n",
plane->drm_plane.base.id,
sti_plane_to_str(plane), plane->zorder);
return &plane->drm_plane;
}
EXPORT_SYMBOL(sti_plane_init);
EXPORT_SYMBOL(sti_plane_init_property);
struct drm_plane_funcs sti_plane_helpers_funcs = {
.update_plane = drm_atomic_helper_update_plane,
.disable_plane = drm_atomic_helper_disable_plane,
.destroy = sti_plane_destroy,
.set_property = sti_plane_set_property,
.reset = drm_atomic_helper_plane_reset,
.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
};
EXPORT_SYMBOL(sti_plane_helpers_funcs);
......@@ -8,6 +8,10 @@
#define _STI_PLANE_H_
#include <drm/drmP.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_plane_helper.h>
extern struct drm_plane_funcs sti_plane_helpers_funcs;
#define to_sti_plane(x) container_of(x, struct sti_plane, drm_plane)
......@@ -38,68 +42,30 @@ enum sti_plane_desc {
STI_BACK = STI_BCK
};
enum sti_plane_status {
STI_PLANE_READY,
STI_PLANE_UPDATED,
STI_PLANE_DISABLING,
STI_PLANE_FLUSHING,
STI_PLANE_DISABLED,
};
/**
* STI plane structure
*
* @plane: drm plane it is bound to (if any)
* @fb: drm fb it is bound to
* @mode: display mode
* @desc: plane type & id
* @ops: plane functions
* @status: to know the status of the plane
* @zorder: plane z-order
* @mixer_id: id of the mixer used to display the plane
* @enabled: to know if the plane is active or not
* @src_x src_y: coordinates of the input (fb) area
* @src_w src_h: size of the input (fb) area
* @dst_x dst_y: coordinates of the output (crtc) area
* @dst_w dst_h: size of the output (crtc) area
* @format: format
* @pitches: pitch of 'planes' (eg: Y, U, V)
* @offsets: offset of 'planes'
* @vaddr: virtual address of the input buffer
* @paddr: physical address of the input buffer
*/
struct sti_plane {
struct drm_plane drm_plane;
struct drm_framebuffer *fb;
struct drm_display_mode *mode;
enum sti_plane_desc desc;
const struct sti_plane_funcs *ops;
enum sti_plane_status status;
int zorder;
int mixer_id;
bool enabled;
int src_x, src_y;
int src_w, src_h;
int dst_x, dst_y;
int dst_w, dst_h;
uint32_t format;
unsigned int pitches[4];
unsigned int offsets[4];
void *vaddr;
dma_addr_t paddr;
};
/**
* STI plane functions structure
*
* @get_formats: get plane supported formats
* @get_nb_formats: get number of format supported
* @prepare: prepare plane before rendering
* @commit: set plane for rendering
* @disable: disable plane
*/
struct sti_plane_funcs {
const uint32_t* (*get_formats)(struct sti_plane *plane);
unsigned int (*get_nb_formats)(struct sti_plane *plane);
int (*prepare)(struct sti_plane *plane, bool first_prepare);
int (*commit)(struct sti_plane *plane);
int (*disable)(struct sti_plane *plane);
};
struct drm_plane *sti_plane_init(struct drm_device *dev,
struct sti_plane *sti_plane,
unsigned int possible_crtcs,
enum drm_plane_type type);
const char *sti_plane_to_str(struct sti_plane *plane);
void sti_plane_init_property(struct sti_plane *plane,
enum drm_plane_type type);
#endif
......@@ -43,28 +43,37 @@
#define VID_MPR2_BT709 0x07150545
#define VID_MPR3_BT709 0x00000AE8
int sti_vid_commit(struct sti_vid *vid, struct sti_plane *plane)
void sti_vid_commit(struct sti_vid *vid,
struct drm_plane_state *state)
{
struct drm_display_mode *mode = plane->mode;
struct drm_crtc *crtc = state->crtc;
struct drm_display_mode *mode = &crtc->mode;
int dst_x = state->crtc_x;
int dst_y = state->crtc_y;
int dst_w = clamp_val(state->crtc_w, 0, mode->crtc_hdisplay - dst_x);
int dst_h = clamp_val(state->crtc_h, 0, mode->crtc_vdisplay - dst_y);
u32 val, ydo, xdo, yds, xds;
/* Input / output size
* Align to upper even value */
dst_w = ALIGN(dst_w, 2);
dst_h = ALIGN(dst_h, 2);
/* Unmask */
val = readl(vid->regs + VID_CTL);
val &= ~VID_CTL_IGNORE;
writel(val, vid->regs + VID_CTL);
ydo = sti_vtg_get_line_number(*mode, plane->dst_y);
yds = sti_vtg_get_line_number(*mode, plane->dst_y + plane->dst_h - 1);
xdo = sti_vtg_get_pixel_number(*mode, plane->dst_x);
xds = sti_vtg_get_pixel_number(*mode, plane->dst_x + plane->dst_w - 1);
ydo = sti_vtg_get_line_number(*mode, dst_y);
yds = sti_vtg_get_line_number(*mode, dst_y + dst_h - 1);
xdo = sti_vtg_get_pixel_number(*mode, dst_x);
xds = sti_vtg_get_pixel_number(*mode, dst_x + dst_w - 1);
writel((ydo << 16) | xdo, vid->regs + VID_VPO);
writel((yds << 16) | xds, vid->regs + VID_VPS);
return 0;
}
int sti_vid_disable(struct sti_vid *vid)
void sti_vid_disable(struct sti_vid *vid)
{
u32 val;
......@@ -72,8 +81,6 @@ int sti_vid_disable(struct sti_vid *vid)
val = readl(vid->regs + VID_CTL);
val |= VID_CTL_IGNORE;
writel(val, vid->regs + VID_CTL);
return 0;
}
static void sti_vid_init(struct sti_vid *vid)
......
......@@ -20,8 +20,9 @@ struct sti_vid {
int id;
};
int sti_vid_commit(struct sti_vid *vid, struct sti_plane *plane);
int sti_vid_disable(struct sti_vid *vid);
void sti_vid_commit(struct sti_vid *vid,
struct drm_plane_state *state);
void sti_vid_disable(struct sti_vid *vid);
struct sti_vid *sti_vid_create(struct device *dev, int id,
void __iomem *baseaddr);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册