The previous commits cleaned up arch/arm/mach-mx2/devices.c such that it
doesn't rely on deprecated symbols any more.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

As the gpio ports have different addresses on imx21 and imx27 there are
two different port descriptions needed if not relying on the overloaded
cpp macro IO_ADDRESS.  So some cpp magic is added to minimize code
duplication.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

The previous commit introduced one nand device per SoC.  Use this
directly instead of the compatibility macro that will break for
multi-SoC kernels.  And while at it remove the compatibility macro now
that all in-tree users are fixed.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

As the NFC controller has different addresses on imx21 and imx27 there
are two different devices needed if not relying on the overloaded cpp
macro NFC_BASE_ADDR.  So some cpp magic is added to minimize code
duplication.

As obviously these two defines need different names, the name of the old
device is #defined to the new one when building for only one of imx21 or
imx27.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

There is only NFC_BASE_ADDR left which is defined differently for mx21
and mx27.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This makes the source shorter and easier to verify.  While at it switch
to use the SoC-prefixed constants.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This makes the source shorter and easier to verify.  While at it switch
to use the SoC-prefixed constants.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This makes the source shorter and easier to verify.  While at it switch
to use the SoC-prefixed constants.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This makes the source shorter and easier to verify.  While at it switch
to use the SoC-prefixed constants.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This makes the source shorter and easier to verify.  While at it switch
to use the SoC-prefixed constants.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This is a further step in allowing to build a kernel image for more
than one imx SOC.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This makes the file compilable for a kernel that supports both imx21 and
imx27.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This simplifies the macro and makes is similar to the other
..._IO_ADDRESS macros defined for imx SOCs.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Apart from MXC91231_IO_ADDRESS itself this was the only usage of
MXC91231_AIPS1_IO_ADDRESS.  Now MXC91231_IO_ADDRESS can be recoded with
IMX_IO_ADDRESS and all helper macros can go away.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Daniel Schaeffer <daniel.schaeffer@timesys.com>
Cc: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Cc: Ivo Clarysse <ivo.clarysse@gmail.com>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

The old names are defined only if the cpp symbol
IMX_NEEDS_DEPRECATED_SYMBOLS exists, which is defined (for now) for all
files below arch/arm/mach-mx1.

This was done earlier for mx2 and mx3, too.

USBD_INT0 is for now defined unconditionally to prevent breaking
drivers/usb/gadget/imx_udc.

While at it use IMX_IO_ADDRESS to define MX1_IO_ADDRESS which
adds a cast to the IO_ADDRESS macro fixing many warnings like

	arch/arm/mach-mx1/generic.c:51: warning: passing argument 1 of 'mxc_init_irq' makes pointer from integer without a cast

.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Reported-by: NTim Sander <tstone@vlsi.informatik.tu-darmstadt.de>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This patch adds SDHC support, and corrects current pins setup.
Added irq handling on card removal.
Signed-off-by: NVladimir Zapolskiy <vzapolskiy@gmail.com>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This fixes:

	arch/arm/kernel/debug.S:147: Error: constant expression expected -- `ldrne r3,=(((UART1_BASE_ADDR)-AIPI_BASE_ADDR)+AIPI_BASE_ADDR_VIRT)'
	arch/arm/kernel/debug.S:163: Error: constant expression expected -- `ldrne r3,=(((UART1_BASE_ADDR)-AIPI_BASE_ADDR)+AIPI_BASE_ADDR_VIRT)'

when compiling for mx2 with CONFIG_DEBUG_LL=y.  A similar error exists
on mx3 and is fixed by this commit, too.

These were introduced by aae70193.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This makes the FEC clock configuration consistent with the UART one.
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

The gpt_clk rate function doesn't consider the PER divider. This causes a
significant drift in time accounting. Fix this by introducing the correct rate
calculation function.
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This patch disables all unnecessary clock in mx25_clocks_init() to make a clean
start, the same as is being done for the rest of the i.MX chips.

This patch was tested on i.MX25 PDK.
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

The fref is needless on mx25 since the reference clock is fixed at 24MHz.
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

For uarts and fec need two clocks, implement it using the secondary clock
field in struct clk.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

To distinguish between mx31lite and mx31lilly boards better to use
different enum types.
Signed-off-by: NVladimir Zapolskiy <vzapolskiy@gmail.com>
Acked-by: NDaniel Mack <daniel@caiaq.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Since AUDMUX configuration appears to be one of the common stumbling
blocks for people setting up i.MX audio try to provide some diagnostic
information describing the current setup to assisist people in working
out what's going on.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This has the addional effect that the macros CSCR_U, CSCR_L and CSCR_A
are not used anymore in mach-pcm038.c and mach-qong.c.  These still use
the deprecated IO_ADDRESS macro and shouldn't be used in new code.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Holger Schurig <hs4233@mail.mn-solutions.de>
Cc: Dmitriy Taychenachev <dimichxp@gmail.com>

Some headers have used (now) wrong names or havn't had protection at
all.  This is needed before adding static inline functions to the
headers.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Magnus Lilja <lilja.magnus@gmail.com>
Cc: Holger Schurig <hs4233@mail.mn-solutions.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Daniel Mack <daniel@caiaq.de>

This include isn't needed and hurts when defining static inline
functions in mach/hardware.h (or files included by mach/hardware.h).

The reason is that the consumers of mach/uncompress.h are compiled using
-Dstatic= so the code for all inline function is included in e.g.
arch/arm/boot/compressed/misc.o.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Jörg Knobloch <knobloch@incostartec.com>
Cc: Alan Carvalho de Assis <acassis@gmail.com>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Dmitriy Taychenachev <dimichxp@gmail.com>

For some time now the defconfig for mx1ads produces a kernel for
a versatile board.  As CONFIG_ARCH_MX1ADS is included in the mx1
defconfig just get rid of mx1ads_defconfig.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>