Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 1 年 前同步成功

通知 158
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 37439a0f 编写于 作者: S Sascha Hauer
浏览文件
操作

Merge branch 'imx' of git://git.pengutronix.de/git/ukl/linux-2.6 into mxc-master

上级 becc670a a8dfb646
隐藏空白更改
内联 并排
Showing with 669 addition and 1283 deletion
arch/arm/configs/mx1ads_defconfig 已删除 100644 → 0
浏览文件 @ becc670a
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc1-bk2
# Sun Mar 27 02:15:46 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_IMX=y
# CONFIG_ARCH_H720X is not set
#
# IMX Implementations
#
CONFIG_ARCH_MX1ADS=y
#
# Processor Type
#
CONFIG_CPU_ARM920T=y
CONFIG_CPU_32v4=y
CONFIG_CPU_ABRT_EV4T=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
#
# Bus support
#
CONFIG_ISA=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Kernel Features
#
CONFIG_PREEMPT=y
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttySMX0,57600n8 ip=bootp root=/dev/nfs"
# CONFIG_XIP_KERNEL is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
CONFIG_FPE_FASTFPE=y
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
CONFIG_MTD_ROM=y
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support
#
#
# I2O device support
#
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_NAND is not set
# CONFIG_JFFS2_FS_NOR_ECC is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_LL is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
arch/arm/configs/mx27_defconfig
浏览文件 @ 37439a0f
......@@ -200,7 +200,7 @@ CONFIG_MACH_MX27ADS=y
CONFIG_MACH_PCM038=y
CONFIG_MACH_PCM970_BASEBOARD=y
CONFIG_MACH_MX27_3DS=y
CONFIG_MACH_MX27LITE=y
CONFIG_MACH_IMX27LITE=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
......
arch/arm/mach-mx1/Makefile
浏览文件 @ 37439a0f
......@@ -10,5 +10,5 @@ obj-y += generic.o clock.o devices.o
obj-$(CONFIG_MX1_VIDEO) += ksym_mx1.o mx1_camera_fiq.o
# Specific board support
obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
obj-$(CONFIG_MACH_SCB9328) += scb9328.o
\ No newline at end of file
obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
arch/arm/mach-mx1/mx1ads.c → arch/arm/mach-mx1/mach-mx1ads.c
浏览文件 @ 37439a0f
/*
* arch/arm/mach-imx/mx1ads.c
* arch/arm/mach-imx/mach-mx1ads.c
*
* Initially based on:
* linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
......
arch/arm/mach-mx1/scb9328.c → arch/arm/mach-mx1/mach-scb9328.c
浏览文件 @ 37439a0f
/*
* linux/arch/arm/mach-mx1/scb9328.c
* linux/arch/arm/mach-mx1/mach-scb9328.c
*
* Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
* Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
......
arch/arm/mach-mx2/Kconfig
浏览文件 @ 37439a0f
......@@ -55,7 +55,7 @@ config MACH_PCM970_BASEBOARD
endchoice
config MACH_EUKREA_CPUIMX27
config MACH_CPUIMX27
bool "Eukrea CPUIMX27 module"
depends on MACH_MX27
help
......@@ -64,14 +64,14 @@ config MACH_EUKREA_CPUIMX27
config MACH_EUKREA_CPUIMX27_USESDHC2
bool "CPUIMX27 integrates SDHC2 module"
depends on MACH_EUKREA_CPUIMX27
depends on MACH_CPUIMX27
help
This adds support for the internal SDHC2 used on CPUIMX27 used
for wifi or eMMC.
choice
prompt "Baseboard"
depends on MACH_EUKREA_CPUIMX27
depends on MACH_CPUIMX27
default MACH_EUKREA_MBIMX27_BASEBOARD
config MACH_EUKREA_MBIMX27_BASEBOARD
......@@ -90,7 +90,7 @@ config MACH_MX27_3DS
Include support for MX27PDK platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX27LITE
config MACH_IMX27LITE
bool "LogicPD MX27 LITEKIT platform"
depends on MACH_MX27
help
......
arch/arm/mach-mx2/Makefile
浏览文件 @ 37439a0f
......@@ -5,20 +5,22 @@
# Object file lists.
obj-y := generic.o devices.o serial.o
CFLAGS_generic.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
CFLAGS_serial.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-$(CONFIG_MACH_MX21) += clock_imx21.o
obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
obj-$(CONFIG_MACH_MX27) += clock_imx27.o
obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o
obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
obj-$(CONFIG_MACH_PCM038) += pcm038.o
obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
obj-$(CONFIG_MACH_PCA100) += pca100.o
obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o
obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
arch/arm/mach-mx2/clock_imx21.c
浏览文件 @ 37439a0f
......@@ -23,11 +23,242 @@
#include <linux/module.h>
#include <mach/clock.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <asm/clkdev.h>
#include <asm/div64.h>
#include "crm_regs.h"
#define IO_ADDR_CCM(off) (MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
/* Register offsets */
#define CCM_CSCR IO_ADDR_CCM(0x0)
#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
#define CCM_PCDR0 IO_ADDR_CCM(0x18)
#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
#define CCM_PCCR0 IO_ADDR_CCM(0x20)
#define CCM_PCCR1 IO_ADDR_CCM(0x24)
#define CCM_CCSR IO_ADDR_CCM(0x28)
#define CCM_PMCTL IO_ADDR_CCM(0x2c)
#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
#define CCM_CSCR_PRESC_OFFSET 29
#define CCM_CSCR_PRESC_MASK (0x7 << CCM_CSCR_PRESC_OFFSET)
#define CCM_CSCR_USB_OFFSET 26
#define CCM_CSCR_USB_MASK (0x7 << CCM_CSCR_USB_OFFSET)
#define CCM_CSCR_SD_OFFSET 24
#define CCM_CSCR_SD_MASK (0x3 << CCM_CSCR_SD_OFFSET)
#define CCM_CSCR_SPLLRES (1 << 22)
#define CCM_CSCR_MPLLRES (1 << 21)
#define CCM_CSCR_SSI2_OFFSET 20
#define CCM_CSCR_SSI2 (1 << CCM_CSCR_SSI2_OFFSET)
#define CCM_CSCR_SSI1_OFFSET 19
#define CCM_CSCR_SSI1 (1 << CCM_CSCR_SSI1_OFFSET)
#define CCM_CSCR_FIR_OFFSET 18
#define CCM_CSCR_FIR (1 << CCM_CSCR_FIR_OFFSET)
#define CCM_CSCR_SP (1 << 17)
#define CCM_CSCR_MCU (1 << 16)
#define CCM_CSCR_BCLK_OFFSET 10
#define CCM_CSCR_BCLK_MASK (0xf << CCM_CSCR_BCLK_OFFSET)
#define CCM_CSCR_IPDIV_OFFSET 9
#define CCM_CSCR_IPDIV (1 << CCM_CSCR_IPDIV_OFFSET)
#define CCM_CSCR_OSC26MDIV (1 << 4)
#define CCM_CSCR_OSC26M (1 << 3)
#define CCM_CSCR_FPM (1 << 2)
#define CCM_CSCR_SPEN (1 << 1)
#define CCM_CSCR_MPEN 1
#define CCM_MPCTL0_CPLM (1 << 31)
#define CCM_MPCTL0_PD_OFFSET 26
#define CCM_MPCTL0_PD_MASK (0xf << 26)
#define CCM_MPCTL0_MFD_OFFSET 16
#define CCM_MPCTL0_MFD_MASK (0x3ff << 16)
#define CCM_MPCTL0_MFI_OFFSET 10
#define CCM_MPCTL0_MFI_MASK (0xf << 10)
#define CCM_MPCTL0_MFN_OFFSET 0
#define CCM_MPCTL0_MFN_MASK 0x3ff
#define CCM_MPCTL1_LF (1 << 15)
#define CCM_MPCTL1_BRMO (1 << 6)
#define CCM_SPCTL0_CPLM (1 << 31)
#define CCM_SPCTL0_PD_OFFSET 26
#define CCM_SPCTL0_PD_MASK (0xf << 26)
#define CCM_SPCTL0_MFD_OFFSET 16
#define CCM_SPCTL0_MFD_MASK (0x3ff << 16)
#define CCM_SPCTL0_MFI_OFFSET 10
#define CCM_SPCTL0_MFI_MASK (0xf << 10)
#define CCM_SPCTL0_MFN_OFFSET 0
#define CCM_SPCTL0_MFN_MASK 0x3ff
#define CCM_SPCTL1_LF (1 << 15)
#define CCM_SPCTL1_BRMO (1 << 6)
#define CCM_OSC26MCTL_PEAK_OFFSET 16
#define CCM_OSC26MCTL_PEAK_MASK (0x3 << 16)
#define CCM_OSC26MCTL_AGC_OFFSET 8
#define CCM_OSC26MCTL_AGC_MASK (0x3f << 8)
#define CCM_OSC26MCTL_ANATEST_OFFSET 0
#define CCM_OSC26MCTL_ANATEST_MASK 0x3f
#define CCM_PCDR0_SSI2BAUDDIV_OFFSET 26
#define CCM_PCDR0_SSI2BAUDDIV_MASK (0x3f << 26)
#define CCM_PCDR0_SSI1BAUDDIV_OFFSET 16
#define CCM_PCDR0_SSI1BAUDDIV_MASK (0x3f << 16)
#define CCM_PCDR0_NFCDIV_OFFSET 12
#define CCM_PCDR0_NFCDIV_MASK (0xf << 12)
#define CCM_PCDR0_48MDIV_OFFSET 5
#define CCM_PCDR0_48MDIV_MASK (0x7 << CCM_PCDR0_48MDIV_OFFSET)
#define CCM_PCDR0_FIRIDIV_OFFSET 0
#define CCM_PCDR0_FIRIDIV_MASK 0x1f
#define CCM_PCDR1_PERDIV4_OFFSET 24
#define CCM_PCDR1_PERDIV4_MASK (0x3f << 24)
#define CCM_PCDR1_PERDIV3_OFFSET 16
#define CCM_PCDR1_PERDIV3_MASK (0x3f << 16)
#define CCM_PCDR1_PERDIV2_OFFSET 8
#define CCM_PCDR1_PERDIV2_MASK (0x3f << 8)
#define CCM_PCDR1_PERDIV1_OFFSET 0
#define CCM_PCDR1_PERDIV1_MASK 0x3f
#define CCM_PCCR_HCLK_CSI_OFFSET 31
#define CCM_PCCR_HCLK_CSI_REG CCM_PCCR0
#define CCM_PCCR_HCLK_DMA_OFFSET 30
#define CCM_PCCR_HCLK_DMA_REG CCM_PCCR0
#define CCM_PCCR_HCLK_BROM_OFFSET 28
#define CCM_PCCR_HCLK_BROM_REG CCM_PCCR0
#define CCM_PCCR_HCLK_EMMA_OFFSET 27
#define CCM_PCCR_HCLK_EMMA_REG CCM_PCCR0
#define CCM_PCCR_HCLK_LCDC_OFFSET 26
#define CCM_PCCR_HCLK_LCDC_REG CCM_PCCR0
#define CCM_PCCR_HCLK_SLCDC_OFFSET 25
#define CCM_PCCR_HCLK_SLCDC_REG CCM_PCCR0
#define CCM_PCCR_HCLK_USBOTG_OFFSET 24
#define CCM_PCCR_HCLK_USBOTG_REG CCM_PCCR0
#define CCM_PCCR_HCLK_BMI_OFFSET 23
#define CCM_PCCR_BMI_MASK (1 << CCM_PCCR_BMI_MASK)
#define CCM_PCCR_HCLK_BMI_REG CCM_PCCR0
#define CCM_PCCR_PERCLK4_OFFSET 22
#define CCM_PCCR_PERCLK4_REG CCM_PCCR0
#define CCM_PCCR_SLCDC_OFFSET 21
#define CCM_PCCR_SLCDC_REG CCM_PCCR0
#define CCM_PCCR_FIRI_BAUD_OFFSET 20
#define CCM_PCCR_FIRI_BAUD_MASK (1 << CCM_PCCR_FIRI_BAUD_MASK)
#define CCM_PCCR_FIRI_BAUD_REG CCM_PCCR0
#define CCM_PCCR_NFC_OFFSET 19
#define CCM_PCCR_NFC_REG CCM_PCCR0
#define CCM_PCCR_LCDC_OFFSET 18
#define CCM_PCCR_LCDC_REG CCM_PCCR0
#define CCM_PCCR_SSI1_BAUD_OFFSET 17
#define CCM_PCCR_SSI1_BAUD_REG CCM_PCCR0
#define CCM_PCCR_SSI2_BAUD_OFFSET 16
#define CCM_PCCR_SSI2_BAUD_REG CCM_PCCR0
#define CCM_PCCR_EMMA_OFFSET 15
#define CCM_PCCR_EMMA_REG CCM_PCCR0
#define CCM_PCCR_USBOTG_OFFSET 14
#define CCM_PCCR_USBOTG_REG CCM_PCCR0
#define CCM_PCCR_DMA_OFFSET 13
#define CCM_PCCR_DMA_REG CCM_PCCR0
#define CCM_PCCR_I2C1_OFFSET 12
#define CCM_PCCR_I2C1_REG CCM_PCCR0
#define CCM_PCCR_GPIO_OFFSET 11
#define CCM_PCCR_GPIO_REG CCM_PCCR0
#define CCM_PCCR_SDHC2_OFFSET 10
#define CCM_PCCR_SDHC2_REG CCM_PCCR0
#define CCM_PCCR_SDHC1_OFFSET 9
#define CCM_PCCR_SDHC1_REG CCM_PCCR0
#define CCM_PCCR_FIRI_OFFSET 8
#define CCM_PCCR_FIRI_MASK (1 << CCM_PCCR_BAUD_MASK)
#define CCM_PCCR_FIRI_REG CCM_PCCR0
#define CCM_PCCR_SSI2_IPG_OFFSET 7
#define CCM_PCCR_SSI2_REG CCM_PCCR0
#define CCM_PCCR_SSI1_IPG_OFFSET 6
#define CCM_PCCR_SSI1_REG CCM_PCCR0
#define CCM_PCCR_CSPI2_OFFSET 5
#define CCM_PCCR_CSPI2_REG CCM_PCCR0
#define CCM_PCCR_CSPI1_OFFSET 4
#define CCM_PCCR_CSPI1_REG CCM_PCCR0
#define CCM_PCCR_UART4_OFFSET 3
#define CCM_PCCR_UART4_REG CCM_PCCR0
#define CCM_PCCR_UART3_OFFSET 2
#define CCM_PCCR_UART3_REG CCM_PCCR0
#define CCM_PCCR_UART2_OFFSET 1
#define CCM_PCCR_UART2_REG CCM_PCCR0
#define CCM_PCCR_UART1_OFFSET 0
#define CCM_PCCR_UART1_REG CCM_PCCR0
#define CCM_PCCR_OWIRE_OFFSET 31
#define CCM_PCCR_OWIRE_REG CCM_PCCR1
#define CCM_PCCR_KPP_OFFSET 30
#define CCM_PCCR_KPP_REG CCM_PCCR1
#define CCM_PCCR_RTC_OFFSET 29
#define CCM_PCCR_RTC_REG CCM_PCCR1
#define CCM_PCCR_PWM_OFFSET 28
#define CCM_PCCR_PWM_REG CCM_PCCR1
#define CCM_PCCR_GPT3_OFFSET 27
#define CCM_PCCR_GPT3_REG CCM_PCCR1
#define CCM_PCCR_GPT2_OFFSET 26
#define CCM_PCCR_GPT2_REG CCM_PCCR1
#define CCM_PCCR_GPT1_OFFSET 25
#define CCM_PCCR_GPT1_REG CCM_PCCR1
#define CCM_PCCR_WDT_OFFSET 24
#define CCM_PCCR_WDT_REG CCM_PCCR1
#define CCM_PCCR_CSPI3_OFFSET 23
#define CCM_PCCR_CSPI3_REG CCM_PCCR1
#define CCM_PCCR_CSPI1_MASK (1 << CCM_PCCR_CSPI1_OFFSET)
#define CCM_PCCR_CSPI2_MASK (1 << CCM_PCCR_CSPI2_OFFSET)
#define CCM_PCCR_CSPI3_MASK (1 << CCM_PCCR_CSPI3_OFFSET)
#define CCM_PCCR_DMA_MASK (1 << CCM_PCCR_DMA_OFFSET)
#define CCM_PCCR_EMMA_MASK (1 << CCM_PCCR_EMMA_OFFSET)
#define CCM_PCCR_GPIO_MASK (1 << CCM_PCCR_GPIO_OFFSET)
#define CCM_PCCR_GPT1_MASK (1 << CCM_PCCR_GPT1_OFFSET)
#define CCM_PCCR_GPT2_MASK (1 << CCM_PCCR_GPT2_OFFSET)
#define CCM_PCCR_GPT3_MASK (1 << CCM_PCCR_GPT3_OFFSET)
#define CCM_PCCR_HCLK_BROM_MASK (1 << CCM_PCCR_HCLK_BROM_OFFSET)
#define CCM_PCCR_HCLK_CSI_MASK (1 << CCM_PCCR_HCLK_CSI_OFFSET)
#define CCM_PCCR_HCLK_DMA_MASK (1 << CCM_PCCR_HCLK_DMA_OFFSET)
#define CCM_PCCR_HCLK_EMMA_MASK (1 << CCM_PCCR_HCLK_EMMA_OFFSET)
#define CCM_PCCR_HCLK_LCDC_MASK (1 << CCM_PCCR_HCLK_LCDC_OFFSET)
#define CCM_PCCR_HCLK_SLCDC_MASK (1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
#define CCM_PCCR_HCLK_USBOTG_MASK (1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
#define CCM_PCCR_I2C1_MASK (1 << CCM_PCCR_I2C1_OFFSET)
#define CCM_PCCR_KPP_MASK (1 << CCM_PCCR_KPP_OFFSET)
#define CCM_PCCR_LCDC_MASK (1 << CCM_PCCR_LCDC_OFFSET)
#define CCM_PCCR_NFC_MASK (1 << CCM_PCCR_NFC_OFFSET)
#define CCM_PCCR_OWIRE_MASK (1 << CCM_PCCR_OWIRE_OFFSET)
#define CCM_PCCR_PERCLK4_MASK (1 << CCM_PCCR_PERCLK4_OFFSET)
#define CCM_PCCR_PWM_MASK (1 << CCM_PCCR_PWM_OFFSET)
#define CCM_PCCR_RTC_MASK (1 << CCM_PCCR_RTC_OFFSET)
#define CCM_PCCR_SDHC1_MASK (1 << CCM_PCCR_SDHC1_OFFSET)
#define CCM_PCCR_SDHC2_MASK (1 << CCM_PCCR_SDHC2_OFFSET)
#define CCM_PCCR_SLCDC_MASK (1 << CCM_PCCR_SLCDC_OFFSET)
#define CCM_PCCR_SSI1_BAUD_MASK (1 << CCM_PCCR_SSI1_BAUD_OFFSET)
#define CCM_PCCR_SSI1_IPG_MASK (1 << CCM_PCCR_SSI1_IPG_OFFSET)
#define CCM_PCCR_SSI2_BAUD_MASK (1 << CCM_PCCR_SSI2_BAUD_OFFSET)
#define CCM_PCCR_SSI2_IPG_MASK (1 << CCM_PCCR_SSI2_IPG_OFFSET)
#define CCM_PCCR_UART1_MASK (1 << CCM_PCCR_UART1_OFFSET)
#define CCM_PCCR_UART2_MASK (1 << CCM_PCCR_UART2_OFFSET)
#define CCM_PCCR_UART3_MASK (1 << CCM_PCCR_UART3_OFFSET)
#define CCM_PCCR_UART4_MASK (1 << CCM_PCCR_UART4_OFFSET)
#define CCM_PCCR_USBOTG_MASK (1 << CCM_PCCR_USBOTG_OFFSET)
#define CCM_PCCR_WDT_MASK (1 << CCM_PCCR_WDT_OFFSET)
#define CCM_CCSR_32KSR (1 << 15)
#define CCM_CCSR_CLKMODE1 (1 << 9)
#define CCM_CCSR_CLKMODE0 (1 << 8)
#define CCM_CCSR_CLKOSEL_OFFSET 0
#define CCM_CCSR_CLKOSEL_MASK 0x1f
#define SYS_FMCR 0x14 /* Functional Muxing Control Reg */
#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */
static int _clk_enable(struct clk *clk)
{
......@@ -1004,6 +1235,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
clk_enable(&uart_clk[0]);
#endif
mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
mxc_timer_init(&gpt_clk[0], MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
MX21_INT_GPT1);
return 0;
}
arch/arm/mach-mx2/clock_imx27.c
浏览文件 @ 37439a0f
......@@ -29,21 +29,23 @@
#include <mach/common.h>
#include <mach/hardware.h>
#define IO_ADDR_CCM(off) (MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
/* Register offsets */
#define CCM_CSCR (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
#define CCM_MPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
#define CCM_MPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
#define CCM_SPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
#define CCM_SPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
#define CCM_OSC26MCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
#define CCM_PCDR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
#define CCM_PCDR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
#define CCM_PCCR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
#define CCM_PCCR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
#define CCM_CCSR (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
#define CCM_PMCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
#define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
#define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
#define CCM_CSCR IO_ADDR_CCM(0x0)
#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
#define CCM_PCDR0 IO_ADDR_CCM(0x18)
#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
#define CCM_PCCR0 IO_ADDR_CCM(0x20)
#define CCM_PCCR1 IO_ADDR_CCM(0x24)
#define CCM_CCSR IO_ADDR_CCM(0x28)
#define CCM_PMCTL IO_ADDR_CCM(0x2c)
#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
#define CCM_CSCR_UPDATE_DIS (1 << 31)
#define CCM_CSCR_SSI2 (1 << 23)
......@@ -755,7 +757,8 @@ int __init mx27_clocks_init(unsigned long fref)
clk_enable(&uart1_clk);
#endif
mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
mxc_timer_init(&gpt1_clk, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
MX27_INT_GPT1);
return 0;
}
......
arch/arm/mach-mx2/cpu_imx27.c
浏览文件 @ 37439a0f
......@@ -39,7 +39,8 @@ static void query_silicon_parameter(void)
* the silicon revision very early we read it here to
* avoid any further hooks
*/
val = __raw_readl(IO_ADDRESS(SYSCTRL_BASE_ADDR) + SYS_CHIP_ID);
val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
+ SYS_CHIP_ID));
cpu_silicon_rev = (int)(val >> 28);
cpu_partnumber = (int)((val >> 12) & 0xFFFF);
......
arch/arm/mach-mx2/crm_regs.h 已删除 100644 → 0
浏览文件 @ becc670a
/*
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__
#define __ARCH_ARM_MACH_MX2_CRM_REGS_H__
#include <mach/hardware.h>
/* Register offsets */
#define CCM_CSCR (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
#define CCM_MPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
#define CCM_MPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
#define CCM_SPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
#define CCM_SPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
#define CCM_OSC26MCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
#define CCM_PCDR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
#define CCM_PCDR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
#define CCM_PCCR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
#define CCM_PCCR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
#define CCM_CCSR (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
#define CCM_PMCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
#define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
#define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
#define CCM_CSCR_PRESC_OFFSET 29
#define CCM_CSCR_PRESC_MASK (0x7 << CCM_CSCR_PRESC_OFFSET)
#define CCM_CSCR_USB_OFFSET 26
#define CCM_CSCR_USB_MASK (0x7 << CCM_CSCR_USB_OFFSET)
#define CCM_CSCR_SD_OFFSET 24
#define CCM_CSCR_SD_MASK (0x3 << CCM_CSCR_SD_OFFSET)
#define CCM_CSCR_SPLLRES (1 << 22)
#define CCM_CSCR_MPLLRES (1 << 21)
#define CCM_CSCR_SSI2_OFFSET 20
#define CCM_CSCR_SSI2 (1 << CCM_CSCR_SSI2_OFFSET)
#define CCM_CSCR_SSI1_OFFSET 19
#define CCM_CSCR_SSI1 (1 << CCM_CSCR_SSI1_OFFSET)
#define CCM_CSCR_FIR_OFFSET 18
#define CCM_CSCR_FIR (1 << CCM_CSCR_FIR_OFFSET)
#define CCM_CSCR_SP (1 << 17)
#define CCM_CSCR_MCU (1 << 16)
#define CCM_CSCR_BCLK_OFFSET 10
#define CCM_CSCR_BCLK_MASK (0xf << CCM_CSCR_BCLK_OFFSET)
#define CCM_CSCR_IPDIV_OFFSET 9
#define CCM_CSCR_IPDIV (1 << CCM_CSCR_IPDIV_OFFSET)
#define CCM_CSCR_OSC26MDIV (1 << 4)
#define CCM_CSCR_OSC26M (1 << 3)
#define CCM_CSCR_FPM (1 << 2)
#define CCM_CSCR_SPEN (1 << 1)
#define CCM_CSCR_MPEN 1
#define CCM_MPCTL0_CPLM (1 << 31)
#define CCM_MPCTL0_PD_OFFSET 26
#define CCM_MPCTL0_PD_MASK (0xf << 26)
#define CCM_MPCTL0_MFD_OFFSET 16
#define CCM_MPCTL0_MFD_MASK (0x3ff << 16)
#define CCM_MPCTL0_MFI_OFFSET 10
#define CCM_MPCTL0_MFI_MASK (0xf << 10)
#define CCM_MPCTL0_MFN_OFFSET 0
#define CCM_MPCTL0_MFN_MASK 0x3ff
#define CCM_MPCTL1_LF (1 << 15)
#define CCM_MPCTL1_BRMO (1 << 6)
#define CCM_SPCTL0_CPLM (1 << 31)
#define CCM_SPCTL0_PD_OFFSET 26
#define CCM_SPCTL0_PD_MASK (0xf << 26)
#define CCM_SPCTL0_MFD_OFFSET 16
#define CCM_SPCTL0_MFD_MASK (0x3ff << 16)
#define CCM_SPCTL0_MFI_OFFSET 10
#define CCM_SPCTL0_MFI_MASK (0xf << 10)
#define CCM_SPCTL0_MFN_OFFSET 0
#define CCM_SPCTL0_MFN_MASK 0x3ff
#define CCM_SPCTL1_LF (1 << 15)
#define CCM_SPCTL1_BRMO (1 << 6)
#define CCM_OSC26MCTL_PEAK_OFFSET 16
#define CCM_OSC26MCTL_PEAK_MASK (0x3 << 16)
#define CCM_OSC26MCTL_AGC_OFFSET 8
#define CCM_OSC26MCTL_AGC_MASK (0x3f << 8)
#define CCM_OSC26MCTL_ANATEST_OFFSET 0
#define CCM_OSC26MCTL_ANATEST_MASK 0x3f
#define CCM_PCDR0_SSI2BAUDDIV_OFFSET 26
#define CCM_PCDR0_SSI2BAUDDIV_MASK (0x3f << 26)
#define CCM_PCDR0_SSI1BAUDDIV_OFFSET 16
#define CCM_PCDR0_SSI1BAUDDIV_MASK (0x3f << 16)
#define CCM_PCDR0_NFCDIV_OFFSET 12
#define CCM_PCDR0_NFCDIV_MASK (0xf << 12)
#define CCM_PCDR0_48MDIV_OFFSET 5
#define CCM_PCDR0_48MDIV_MASK (0x7 << CCM_PCDR0_48MDIV_OFFSET)
#define CCM_PCDR0_FIRIDIV_OFFSET 0
#define CCM_PCDR0_FIRIDIV_MASK 0x1f
#define CCM_PCDR1_PERDIV4_OFFSET 24
#define CCM_PCDR1_PERDIV4_MASK (0x3f << 24)
#define CCM_PCDR1_PERDIV3_OFFSET 16
#define CCM_PCDR1_PERDIV3_MASK (0x3f << 16)
#define CCM_PCDR1_PERDIV2_OFFSET 8
#define CCM_PCDR1_PERDIV2_MASK (0x3f << 8)
#define CCM_PCDR1_PERDIV1_OFFSET 0
#define CCM_PCDR1_PERDIV1_MASK 0x3f
#define CCM_PCCR_HCLK_CSI_OFFSET 31
#define CCM_PCCR_HCLK_CSI_REG CCM_PCCR0
#define CCM_PCCR_HCLK_DMA_OFFSET 30
#define CCM_PCCR_HCLK_DMA_REG CCM_PCCR0
#define CCM_PCCR_HCLK_BROM_OFFSET 28
#define CCM_PCCR_HCLK_BROM_REG CCM_PCCR0
#define CCM_PCCR_HCLK_EMMA_OFFSET 27
#define CCM_PCCR_HCLK_EMMA_REG CCM_PCCR0
#define CCM_PCCR_HCLK_LCDC_OFFSET 26
#define CCM_PCCR_HCLK_LCDC_REG CCM_PCCR0
#define CCM_PCCR_HCLK_SLCDC_OFFSET 25
#define CCM_PCCR_HCLK_SLCDC_REG CCM_PCCR0
#define CCM_PCCR_HCLK_USBOTG_OFFSET 24
#define CCM_PCCR_HCLK_USBOTG_REG CCM_PCCR0
#define CCM_PCCR_HCLK_BMI_OFFSET 23
#define CCM_PCCR_BMI_MASK (1 << CCM_PCCR_BMI_MASK)
#define CCM_PCCR_HCLK_BMI_REG CCM_PCCR0
#define CCM_PCCR_PERCLK4_OFFSET 22
#define CCM_PCCR_PERCLK4_REG CCM_PCCR0
#define CCM_PCCR_SLCDC_OFFSET 21
#define CCM_PCCR_SLCDC_REG CCM_PCCR0
#define CCM_PCCR_FIRI_BAUD_OFFSET 20
#define CCM_PCCR_FIRI_BAUD_MASK (1 << CCM_PCCR_FIRI_BAUD_MASK)
#define CCM_PCCR_FIRI_BAUD_REG CCM_PCCR0
#define CCM_PCCR_NFC_OFFSET 19
#define CCM_PCCR_NFC_REG CCM_PCCR0
#define CCM_PCCR_LCDC_OFFSET 18
#define CCM_PCCR_LCDC_REG CCM_PCCR0
#define CCM_PCCR_SSI1_BAUD_OFFSET 17
#define CCM_PCCR_SSI1_BAUD_REG CCM_PCCR0
#define CCM_PCCR_SSI2_BAUD_OFFSET 16
#define CCM_PCCR_SSI2_BAUD_REG CCM_PCCR0
#define CCM_PCCR_EMMA_OFFSET 15
#define CCM_PCCR_EMMA_REG CCM_PCCR0
#define CCM_PCCR_USBOTG_OFFSET 14
#define CCM_PCCR_USBOTG_REG CCM_PCCR0
#define CCM_PCCR_DMA_OFFSET 13
#define CCM_PCCR_DMA_REG CCM_PCCR0
#define CCM_PCCR_I2C1_OFFSET 12
#define CCM_PCCR_I2C1_REG CCM_PCCR0
#define CCM_PCCR_GPIO_OFFSET 11
#define CCM_PCCR_GPIO_REG CCM_PCCR0
#define CCM_PCCR_SDHC2_OFFSET 10
#define CCM_PCCR_SDHC2_REG CCM_PCCR0
#define CCM_PCCR_SDHC1_OFFSET 9
#define CCM_PCCR_SDHC1_REG CCM_PCCR0
#define CCM_PCCR_FIRI_OFFSET 8
#define CCM_PCCR_FIRI_MASK (1 << CCM_PCCR_BAUD_MASK)
#define CCM_PCCR_FIRI_REG CCM_PCCR0
#define CCM_PCCR_SSI2_IPG_OFFSET 7
#define CCM_PCCR_SSI2_REG CCM_PCCR0
#define CCM_PCCR_SSI1_IPG_OFFSET 6
#define CCM_PCCR_SSI1_REG CCM_PCCR0
#define CCM_PCCR_CSPI2_OFFSET 5
#define CCM_PCCR_CSPI2_REG CCM_PCCR0
#define CCM_PCCR_CSPI1_OFFSET 4
#define CCM_PCCR_CSPI1_REG CCM_PCCR0
#define CCM_PCCR_UART4_OFFSET 3
#define CCM_PCCR_UART4_REG CCM_PCCR0
#define CCM_PCCR_UART3_OFFSET 2
#define CCM_PCCR_UART3_REG CCM_PCCR0
#define CCM_PCCR_UART2_OFFSET 1
#define CCM_PCCR_UART2_REG CCM_PCCR0
#define CCM_PCCR_UART1_OFFSET 0
#define CCM_PCCR_UART1_REG CCM_PCCR0
#define CCM_PCCR_OWIRE_OFFSET 31
#define CCM_PCCR_OWIRE_REG CCM_PCCR1
#define CCM_PCCR_KPP_OFFSET 30
#define CCM_PCCR_KPP_REG CCM_PCCR1
#define CCM_PCCR_RTC_OFFSET 29
#define CCM_PCCR_RTC_REG CCM_PCCR1
#define CCM_PCCR_PWM_OFFSET 28
#define CCM_PCCR_PWM_REG CCM_PCCR1
#define CCM_PCCR_GPT3_OFFSET 27
#define CCM_PCCR_GPT3_REG CCM_PCCR1
#define CCM_PCCR_GPT2_OFFSET 26
#define CCM_PCCR_GPT2_REG CCM_PCCR1
#define CCM_PCCR_GPT1_OFFSET 25
#define CCM_PCCR_GPT1_REG CCM_PCCR1
#define CCM_PCCR_WDT_OFFSET 24
#define CCM_PCCR_WDT_REG CCM_PCCR1
#define CCM_PCCR_CSPI3_OFFSET 23
#define CCM_PCCR_CSPI3_REG CCM_PCCR1
#define CCM_PCCR_CSPI1_MASK (1 << CCM_PCCR_CSPI1_OFFSET)
#define CCM_PCCR_CSPI2_MASK (1 << CCM_PCCR_CSPI2_OFFSET)
#define CCM_PCCR_CSPI3_MASK (1 << CCM_PCCR_CSPI3_OFFSET)
#define CCM_PCCR_DMA_MASK (1 << CCM_PCCR_DMA_OFFSET)
#define CCM_PCCR_EMMA_MASK (1 << CCM_PCCR_EMMA_OFFSET)
#define CCM_PCCR_GPIO_MASK (1 << CCM_PCCR_GPIO_OFFSET)
#define CCM_PCCR_GPT1_MASK (1 << CCM_PCCR_GPT1_OFFSET)
#define CCM_PCCR_GPT2_MASK (1 << CCM_PCCR_GPT2_OFFSET)
#define CCM_PCCR_GPT3_MASK (1 << CCM_PCCR_GPT3_OFFSET)
#define CCM_PCCR_HCLK_BROM_MASK (1 << CCM_PCCR_HCLK_BROM_OFFSET)
#define CCM_PCCR_HCLK_CSI_MASK (1 << CCM_PCCR_HCLK_CSI_OFFSET)
#define CCM_PCCR_HCLK_DMA_MASK (1 << CCM_PCCR_HCLK_DMA_OFFSET)
#define CCM_PCCR_HCLK_EMMA_MASK (1 << CCM_PCCR_HCLK_EMMA_OFFSET)
#define CCM_PCCR_HCLK_LCDC_MASK (1 << CCM_PCCR_HCLK_LCDC_OFFSET)
#define CCM_PCCR_HCLK_SLCDC_MASK (1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
#define CCM_PCCR_HCLK_USBOTG_MASK (1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
#define CCM_PCCR_I2C1_MASK (1 << CCM_PCCR_I2C1_OFFSET)
#define CCM_PCCR_KPP_MASK (1 << CCM_PCCR_KPP_OFFSET)
#define CCM_PCCR_LCDC_MASK (1 << CCM_PCCR_LCDC_OFFSET)
#define CCM_PCCR_NFC_MASK (1 << CCM_PCCR_NFC_OFFSET)
#define CCM_PCCR_OWIRE_MASK (1 << CCM_PCCR_OWIRE_OFFSET)
#define CCM_PCCR_PERCLK4_MASK (1 << CCM_PCCR_PERCLK4_OFFSET)
#define CCM_PCCR_PWM_MASK (1 << CCM_PCCR_PWM_OFFSET)
#define CCM_PCCR_RTC_MASK (1 << CCM_PCCR_RTC_OFFSET)
#define CCM_PCCR_SDHC1_MASK (1 << CCM_PCCR_SDHC1_OFFSET)
#define CCM_PCCR_SDHC2_MASK (1 << CCM_PCCR_SDHC2_OFFSET)
#define CCM_PCCR_SLCDC_MASK (1 << CCM_PCCR_SLCDC_OFFSET)
#define CCM_PCCR_SSI1_BAUD_MASK (1 << CCM_PCCR_SSI1_BAUD_OFFSET)
#define CCM_PCCR_SSI1_IPG_MASK (1 << CCM_PCCR_SSI1_IPG_OFFSET)
#define CCM_PCCR_SSI2_BAUD_MASK (1 << CCM_PCCR_SSI2_BAUD_OFFSET)
#define CCM_PCCR_SSI2_IPG_MASK (1 << CCM_PCCR_SSI2_IPG_OFFSET)
#define CCM_PCCR_UART1_MASK (1 << CCM_PCCR_UART1_OFFSET)
#define CCM_PCCR_UART2_MASK (1 << CCM_PCCR_UART2_OFFSET)
#define CCM_PCCR_UART3_MASK (1 << CCM_PCCR_UART3_OFFSET)
#define CCM_PCCR_UART4_MASK (1 << CCM_PCCR_UART4_OFFSET)
#define CCM_PCCR_USBOTG_MASK (1 << CCM_PCCR_USBOTG_OFFSET)
#define CCM_PCCR_WDT_MASK (1 << CCM_PCCR_WDT_OFFSET)
#define CCM_CCSR_32KSR (1 << 15)
#define CCM_CCSR_CLKMODE1 (1 << 9)
#define CCM_CCSR_CLKMODE0 (1 << 8)
#define CCM_CCSR_CLKOSEL_OFFSET 0
#define CCM_CCSR_CLKOSEL_MASK 0x1f
#define SYS_FMCR 0x14 /* Functional Muxing Control Reg */
#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */
#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */
arch/arm/mach-mx2/eukrea_cpuimx27.c → arch/arm/mach-mx2/mach-cpuimx27.c
浏览文件 @ 37439a0f
......@@ -142,28 +142,28 @@ static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
static struct plat_serial8250_port serial_platform_data[] = {
{
.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000),
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
.irq = IRQ_GPIOB(23),
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000),
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
.irq = IRQ_GPIOB(22),
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000),
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
.irq = IRQ_GPIOB(27),
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000),
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
.irq = IRQ_GPIOB(30),
.uartclk = 14745600,
.regshift = 1,
......@@ -224,8 +224,8 @@ static struct sys_timer eukrea_cpuimx27_timer = {
};
MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
.phys_io = AIPI_BASE_ADDR,
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX27_AIPI_BASE_ADDR,
.io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
.init_irq = mx27_init_irq,
......
arch/arm/mach-mx2/mx27lite.c → arch/arm/mach-mx2/mach-imx27lite.c
浏览文件 @ 37439a0f
......@@ -85,8 +85,8 @@ static struct sys_timer mx27lite_timer = {
};
MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
.phys_io = AIPI_BASE_ADDR,
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX27_AIPI_BASE_ADDR,
.io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
.init_irq = mx27_init_irq,
......
arch/arm/mach-mx2/mx21ads.c → arch/arm/mach-mx2/mach-mx21ads.c
浏览文件 @ 37439a0f
......@@ -118,8 +118,8 @@ static struct physmap_flash_data mx21ads_flash_data = {
};
static struct resource mx21ads_flash_resource = {
.start = CS0_BASE_ADDR,
.end = CS0_BASE_ADDR + 0x02000000 - 1,
.start = MX21_CS0_BASE_ADDR,
.end = MX21_CS0_BASE_ADDR + 0x02000000 - 1,
.flags = IORESOURCE_MEM,
};
......@@ -242,7 +242,7 @@ static struct map_desc mx21ads_io_desc[] __initdata = {
*/
{
.virtual = MX21ADS_MMIO_BASE_ADDR,
.pfn = __phys_to_pfn(CS1_BASE_ADDR),
.pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR),
.length = MX21ADS_MMIO_SIZE,
.type = MT_DEVICE,
},
......@@ -284,8 +284,8 @@ static struct sys_timer mx21ads_timer = {
MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
/* maintainer: Freescale Semiconductor, Inc. */
.phys_io = AIPI_BASE_ADDR,
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX21_AIPI_BASE_ADDR,
.io_pg_offst = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx21ads_map_io,
.init_irq = mx21_init_irq,
......
arch/arm/mach-mx2/mx27pdk.c → arch/arm/mach-mx2/mach-mx27_3ds.c
浏览文件 @ 37439a0f
......@@ -85,8 +85,8 @@ static struct sys_timer mx27pdk_timer = {
MACHINE_START(MX27_3DS, "Freescale MX27PDK")
/* maintainer: Freescale Semiconductor, Inc. */
.phys_io = AIPI_BASE_ADDR,
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX27_AIPI_BASE_ADDR,
.io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
.init_irq = mx27_init_irq,
......
arch/arm/mach-mx2/mx27ads.c → arch/arm/mach-mx2/mach-mx27ads.c
浏览文件 @ 37439a0f
......@@ -320,7 +320,7 @@ static struct sys_timer mx27ads_timer = {
static struct map_desc mx27ads_io_desc[] __initdata = {
{
.virtual = PBC_BASE_ADDRESS,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
.pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
.length = SZ_1M,
.type = MT_DEVICE,
},
......@@ -334,8 +334,8 @@ static void __init mx27ads_map_io(void)
MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
/* maintainer: Freescale Semiconductor, Inc. */
.phys_io = AIPI_BASE_ADDR,
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX27_AIPI_BASE_ADDR,
.io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx27ads_map_io,
.init_irq = mx27_init_irq,
......
arch/arm/mach-mx2/mxt_td60.c → arch/arm/mach-mx2/mach-mxt_td60.c
浏览文件 @ 37439a0f
......@@ -58,21 +58,6 @@ static unsigned int mxt_td60_pins[] __initdata = {
PE9_PF_UART3_RXD,
PE10_PF_UART3_CTS,
PE11_PF_UART3_RTS,
/* UART3 */
PB26_AF_UART4_RTS,
PB28_AF_UART4_TXD,
PB29_AF_UART4_CTS,
PB31_AF_UART4_RXD,
/* UART4 */
PB18_AF_UART5_TXD,
PB19_AF_UART5_RXD,
PB20_AF_UART5_CTS,
PB21_AF_UART5_RTS,
/* UART5 */
PB10_AF_UART6_TXD,
PB12_AF_UART6_CTS,
PB11_AF_UART6_RXD,
PB13_AF_UART6_RTS,
/* FEC */
PD0_AIN_FEC_TXD0,
PD1_AIN_FEC_TXD1,
......@@ -261,12 +246,6 @@ static struct imxuart_platform_data uart_pdata[] = {
.flags = IMXUART_HAVE_RTSCTS,
}, {
.flags = IMXUART_HAVE_RTSCTS,
}, {
.flags = IMXUART_HAVE_RTSCTS,
}, {
.flags = IMXUART_HAVE_RTSCTS,
}, {
.flags = IMXUART_HAVE_RTSCTS,
},
};
......@@ -278,9 +257,6 @@ static void __init mxt_td60_board_init(void)
mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
i2c_register_board_info(0, mxt_td60_i2c_devices,
......@@ -308,8 +284,8 @@ static struct sys_timer mxt_td60_timer = {
MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
/* maintainer: Maxtrack Industrial */
.phys_io = AIPI_BASE_ADDR,
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX27_AIPI_BASE_ADDR,
.io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
.init_irq = mx27_init_irq,
......
arch/arm/mach-mx2/pca100.c → arch/arm/mach-mx2/mach-pca100.c
浏览文件 @ 37439a0f
......@@ -233,8 +233,8 @@ static struct sys_timer pca100_timer = {
};
MACHINE_START(PCA100, "phyCARD-i.MX27")
.phys_io = AIPI_BASE_ADDR,
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX27_AIPI_BASE_ADDR,
.io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
.init_irq = mx27_init_irq,
......
arch/arm/mach-mx2/pcm038.c → arch/arm/mach-mx2/mach-pcm038.c
浏览文件 @ 37439a0f
......@@ -108,8 +108,8 @@ static struct platdata_mtd_ram pcm038_sram_data = {
};
static struct resource pcm038_sram_resource = {
.start = CS1_BASE_ADDR,
.end = CS1_BASE_ADDR + 512 * 1024 - 1,
.start = MX27_CS1_BASE_ADDR,
.end = MX27_CS1_BASE_ADDR + 512 * 1024 - 1,
.flags = IORESOURCE_MEM,
};
......@@ -173,9 +173,7 @@ static struct platform_device *platform_devices[] __initdata = {
* setup other stuffs to access the sram. */
static void __init pcm038_init_sram(void)
{
__raw_writel(0x0000d843, CSCR_U(1));
__raw_writel(0x22252521, CSCR_L(1));
__raw_writel(0x22220a00, CSCR_A(1));
mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
}
static struct imxi2c_platform_data pcm038_i2c_1_data = {
......@@ -328,8 +326,8 @@ static struct sys_timer pcm038_timer = {
};
MACHINE_START(PCM038, "phyCORE-i.MX27")
.phys_io = AIPI_BASE_ADDR,
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX27_AIPI_BASE_ADDR,
.io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
.init_irq = mx27_init_irq,
......
arch/arm/mach-mx2/pcm970-baseboard.c
浏览文件 @ 37439a0f
......@@ -190,8 +190,8 @@ static struct imx_fb_platform_data pcm038_fb_data = {
static struct resource pcm970_sja1000_resources[] = {
{
.start = CS4_BASE_ADDR,
.end = CS4_BASE_ADDR + 0x100 - 1,
.start = MX27_CS4_BASE_ADDR,
.end = MX27_CS4_BASE_ADDR + 0x100 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_GPIOE(19),
......
arch/arm/mach-mx25/clock.c
浏览文件 @ 37439a0f
......@@ -173,6 +173,7 @@ DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL);
DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL);
DEFINE_CLOCK(fec_clk, 0, CCM_CGCR0, 23, get_rate_ipg, NULL);
#define _REGISTER_CLOCK(d, n, c) \
{ \
......@@ -204,6 +205,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
};
int __init mx25_clocks_init(unsigned long fref)
......
arch/arm/mach-mx25/devices.c
浏览文件 @ 37439a0f
......@@ -419,3 +419,22 @@ int __init mxc_register_gpios(void)
return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
}
static struct resource mx25_fec_resources[] = {
{
.start = MX25_FEC_BASE_ADDR,
.end = MX25_FEC_BASE_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
},
{
.start = MX25_INT_FEC,
.end = MX25_INT_FEC,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device mx25_fec_device = {
.name = "fec",
.id = 0,
.num_resources = ARRAY_SIZE(mx25_fec_resources),
.resource = mx25_fec_resources,
};
arch/arm/mach-mx25/devices.h
浏览文件 @ 37439a0f
......@@ -17,3 +17,4 @@ extern struct platform_device mxc_keypad_device;
extern struct platform_device mxc_i2c_device0;
extern struct platform_device mxc_i2c_device1;
extern struct platform_device mxc_i2c_device2;
extern struct platform_device mx25_fec_device;
arch/arm/mach-mx25/mx25pdk.c
浏览文件 @ 37439a0f
......@@ -18,10 +18,11 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/smsc911x.h>
#include <linux/fec.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
......@@ -35,16 +36,57 @@
#include <mach/mx25.h>
#include <mach/mxc_nand.h>
#include "devices.h"
#include <mach/iomux-v3.h>
#include <mach/iomux.h>
static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
static struct pad_desc mx25pdk_pads[] = {
MX25_PAD_FEC_MDC__FEC_MDC,
MX25_PAD_FEC_MDIO__FEC_MDIO,
MX25_PAD_FEC_TDATA0__FEC_TDATA0,
MX25_PAD_FEC_TDATA1__FEC_TDATA1,
MX25_PAD_FEC_TX_EN__FEC_TX_EN,
MX25_PAD_FEC_RDATA0__FEC_RDATA0,
MX25_PAD_FEC_RDATA1__FEC_RDATA1,
MX25_PAD_FEC_RX_DV__FEC_RX_DV,
MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
};
static struct fec_platform_data mx25_fec_pdata = {
.phy = PHY_INTERFACE_MODE_RMII,
};
#define FEC_ENABLE_GPIO 35
#define FEC_RESET_B_GPIO 104
static void __init mx25pdk_fec_reset(void)
{
gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
gpio_direction_output(FEC_ENABLE_GPIO, 0); /* drop PHY power */
gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
udelay(2);
/* turn on PHY power and lift reset */
gpio_set_value(FEC_ENABLE_GPIO, 1);
gpio_set_value(FEC_RESET_B_GPIO, 1);
}
static void __init mx25pdk_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
ARRAY_SIZE(mx25pdk_pads));
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_usbh2, NULL);
mx25pdk_fec_reset();
mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
}
static void __init mx25pdk_timer_init(void)
......
arch/arm/mach-mx3/Kconfig
浏览文件 @ 37439a0f
......@@ -49,6 +49,7 @@ config MACH_PCM037_EET
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
select ARCH_MX31
select MXC_ULPI if USB_ULPI
help
Include support for MX31 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
......@@ -63,7 +64,7 @@ config MACH_MX31_3DS
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
select ARCH_MX31
select MXC_ULPI
select MXC_ULPI if USB_ULPI
help
Include support for mx31moboard platform. This includes specific
configurations for the board and its peripherals.
......
arch/arm/mach-mx3/Makefile
浏览文件 @ 37439a0f
......@@ -5,18 +5,22 @@
# Object file lists.
obj-y := mm.o devices.o cpu.o
obj-$(CONFIG_ARCH_MX31) += clock.o iomux.o
CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
CFLAGS_cpu.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-$(CONFIG_ARCH_MX31) += clock-imx31.o iomux-imx31.o
obj-$(CONFIG_ARCH_MX35) += clock-imx35.o
obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o
obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o
obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o mx31lite-db.o
obj-$(CONFIG_MACH_PCM037) += pcm037.o
obj-$(CONFIG_MACH_PCM037_EET) += pcm037_eet.o
obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o
obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \
obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o
obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o
obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o
obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
CFLAGS_mach-mx31_3ds.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
mx31moboard-marxbot.o
obj-$(CONFIG_MACH_QONG) += qong.o
obj-$(CONFIG_MACH_PCM043) += pcm043.o
obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
obj-$(CONFIG_MACH_MX35_3DS) += mx35pdk.o
obj-$(CONFIG_MACH_KZM_ARM11_01) += kzmarm11.o
obj-$(CONFIG_MACH_QONG) += mach-qong.o
obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35pdk.o
obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
arch/arm/mach-mx3/clock.c → arch/arm/mach-mx3/clock-imx31.c
浏览文件 @ 37439a0f
......@@ -618,14 +618,15 @@ int __init mx31_clocks_init(unsigned long fref)
mx31_read_cpu_rev();
if (mx31_revision() >= CHIP_REV_2_0) {
if (mx31_revision() >= MX31_CHIP_REV_2_0) {
reg = __raw_readl(MXC_CCM_PMCR1);
/* No PLL restart on DVFS switch; enable auto EMI handshake */
reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
__raw_writel(reg, MXC_CCM_PMCR1);
}
mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
mxc_timer_init(&ipg_clk, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
MX31_INT_GPT);
return 0;
}
......
arch/arm/mach-mx3/clock-imx35.c
浏览文件 @ 37439a0f
......@@ -28,7 +28,7 @@
#include <mach/hardware.h>
#include <mach/common.h>
#define CCM_BASE IO_ADDRESS(CCM_BASE_ADDR)
#define CCM_BASE MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR)
#define CCM_CCMR 0x00
#define CCM_PDR0 0x04
......@@ -504,7 +504,8 @@ int __init mx35_clocks_init()
__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
__raw_writel(0, CCM_BASE + CCM_CGR3);
mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
mxc_timer_init(&gpt_clk,
MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
return 0;
}
......
arch/arm/mach-mx3/cpu.c
浏览文件 @ 37439a0f
......@@ -41,7 +41,7 @@ void __init mx31_read_cpu_rev(void)
u32 i, srev;
/* read SREV register from IIM module */
srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR) + MXC_IIMSREV);
srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR + MXC_IIMSREV));
for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
if (srev == mx31_cpu_type[i].srev) {
......
arch/arm/mach-mx3/crm_regs.h
浏览文件 @ 37439a0f
......@@ -24,7 +24,7 @@
#define CKIH_CLK_FREQ_27MHZ 27000000
#define CKIL_CLK_FREQ 32768
#define MXC_CCM_BASE IO_ADDRESS(CCM_BASE_ADDR)
#define MXC_CCM_BASE MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR)
/* Register addresses */
#define MXC_CCM_CCMR (MXC_CCM_BASE + 0x00)
......
arch/arm/mach-mx3/iomux.c → arch/arm/mach-mx3/iomux-imx31.c
浏览文件 @ 37439a0f
......@@ -29,7 +29,7 @@
/*
* IOMUX register (base) addresses
*/
#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR)
#define IOMUX_BASE MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
#define IOMUXINT_OBS1 (IOMUX_BASE + 0x000)
#define IOMUXINT_OBS2 (IOMUX_BASE + 0x004)
#define IOMUXGPR (IOMUX_BASE + 0x008)
......
arch/arm/mach-mx3/armadillo5x0.c → arch/arm/mach-mx3/mach-armadillo5x0.c
浏览文件 @ 37439a0f
......@@ -182,8 +182,8 @@ static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
static struct resource armadillo5x0_nor_flash_resource = {
.flags = IORESOURCE_MEM,
.start = CS0_BASE_ADDR,
.end = CS0_BASE_ADDR + SZ_64M - 1,
.start = MX31_CS0_BASE_ADDR,
.end = MX31_CS0_BASE_ADDR + SZ_64M - 1,
};
static struct platform_device armadillo5x0_nor_flash = {
......@@ -311,8 +311,8 @@ static struct imxmmc_platform_data sdhc_pdata = {
*/
static struct resource armadillo5x0_smc911x_resources[] = {
{
.start = CS3_BASE_ADDR,
.end = CS3_BASE_ADDR + SZ_32M - 1,
.start = MX31_CS3_BASE_ADDR,
.end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
......@@ -406,8 +406,8 @@ static struct sys_timer armadillo5x0_timer = {
MACHINE_START(ARMADILLO5X0, "Armadillo-500")
/* Maintainer: Alberto Panizzo */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x00000100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
......
arch/arm/mach-mx3/kzmarm11.c → arch/arm/mach-mx3/mach-kzm_arm11_01.c
浏览文件 @ 37439a0f
......@@ -46,13 +46,18 @@
#include "devices.h"
#define KZM_ARM11_IO_ADDRESS(x) ( \
IMX_IO_ADDRESS(x, MX31_CS4) ?: \
IMX_IO_ADDRESS(x, MX31_CS5) ?: \
MX31_IO_ADDRESS(x))
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
/*
* KZM-ARM11-01 has an external UART on FPGA
*/
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = IO_ADDRESS(KZM_ARM11_16550),
.membase = KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550),
.mapbase = KZM_ARM11_16550,
.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
.irqflags = IRQ_TYPE_EDGE_RISING,
......@@ -102,9 +107,9 @@ static int __init kzm_init_ext_uart(void)
/*
* Unmask UART interrupt
*/
tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1));
tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
tmp |= 0x2;
__raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1));
__raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
return platform_device_register(&serial_device);
}
......@@ -128,8 +133,8 @@ static struct smsc911x_platform_config kzm_smsc9118_config = {
static struct resource kzm_smsc9118_resources[] = {
{
.start = CS5_BASE_ADDR,
.end = CS5_BASE_ADDR + SZ_128K - 1,
.start = MX31_CS5_BASE_ADDR,
.end = MX31_CS5_BASE_ADDR + SZ_128K - 1,
.flags = IORESOURCE_MEM,
},
{
......@@ -222,15 +227,15 @@ static void __init kzm_board_init(void)
*/
static struct map_desc kzm_io_desc[] __initdata = {
{
.virtual = CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
.length = CS4_SIZE,
.virtual = MX31_CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
.length = MX31_CS4_SIZE,
.type = MT_DEVICE
},
{
.virtual = CS5_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS5_BASE_ADDR),
.length = CS5_SIZE,
.virtual = MX31_CS5_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
.length = MX31_CS5_SIZE,
.type = MT_DEVICE
},
};
......@@ -258,8 +263,8 @@ static struct sys_timer kzm_timer = {
* initialize __mach_desc_KZM_ARM11_01 data structure.
*/
MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = kzm_map_io,
.init_irq = mx31_init_irq,
......
arch/arm/mach-mx3/mx31pdk.c → arch/arm/mach-mx3/mach-mx31_3ds.c
浏览文件 @ 37439a0f
......@@ -211,14 +211,9 @@ static int __init mx31pdk_init_expio(void)
*/
static struct map_desc mx31pdk_io_desc[] __initdata = {
{
.virtual = SPBA0_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
.length = SPBA0_SIZE,
.type = MT_DEVICE_NONSHARED,
}, {
.virtual = CS5_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS5_BASE_ADDR),
.length = CS5_SIZE,
.virtual = MX31_CS5_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
.length = MX31_CS5_SIZE,
.type = MT_DEVICE,
},
};
......@@ -261,8 +256,8 @@ static struct sys_timer mx31pdk_timer = {
*/
MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31pdk_map_io,
.init_irq = mx31_init_irq,
......
arch/arm/mach-mx3/mx31ads.c → arch/arm/mach-mx3/mach-mx31ads.c
浏览文件 @ 37439a0f
......@@ -60,7 +60,7 @@
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
.mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTA),
.mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
.irq = EXPIO_INT_XUART_INTA,
.uartclk = 14745600,
.regshift = 0,
......@@ -68,7 +68,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
}, {
.membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
.mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTB),
.mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
.irq = EXPIO_INT_XUART_INTB,
.uartclk = 14745600,
.regshift = 0,
......@@ -486,14 +486,9 @@ static void mxc_init_i2c(void)
*/
static struct map_desc mx31ads_io_desc[] __initdata = {
{
.virtual = SPBA0_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
.length = SPBA0_SIZE,
.type = MT_DEVICE_NONSHARED
}, {
.virtual = CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
.length = CS4_SIZE / 2,
.virtual = MX31_CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
.length = MX31_CS4_SIZE / 2,
.type = MT_DEVICE
},
};
......@@ -538,8 +533,8 @@ static struct sys_timer mx31ads_timer = {
*/
MACHINE_START(MX31ADS, "Freescale MX31ADS")
/* Maintainer: Freescale Semiconductor, Inc. */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31ads_map_io,
.init_irq = mx31ads_init_irq,
......
arch/arm/mach-mx3/mx31lilly.c → arch/arm/mach-mx3/mach-mx31lilly.c
浏览文件 @ 37439a0f
......@@ -57,8 +57,8 @@
static struct resource smsc91x_resources[] = {
{
.start = CS4_BASE_ADDR,
.end = CS4_BASE_ADDR + 0xffff,
.start = MX31_CS4_BASE_ADDR,
.end = MX31_CS4_BASE_ADDR + 0xffff,
.flags = IORESOURCE_MEM,
},
{
......@@ -195,8 +195,8 @@ static struct sys_timer mx31lilly_timer = {
};
MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
......
arch/arm/mach-mx3/mx31lite.c → arch/arm/mach-mx3/mach-mx31lite.c
浏览文件 @ 37439a0f
......@@ -82,8 +82,8 @@ static struct smsc911x_platform_config smsc911x_config = {
static struct resource smsc911x_resources[] = {
{
.start = CS4_BASE_ADDR,
.end = CS4_BASE_ADDR + 0x100,
.start = MX31_CS4_BASE_ADDR,
.end = MX31_CS4_BASE_ADDR + 0x100,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(MX31_PIN_SFS6),
......@@ -135,6 +135,7 @@ static struct spi_board_info mc13783_spi_dev __initdata = {
* USB
*/
#if defined(CONFIG_USB_ULPI)
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
......@@ -180,6 +181,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
#endif
/*
* NOR flash
......@@ -212,14 +214,9 @@ static struct platform_device physmap_flash_device = {
*/
static struct map_desc mx31lite_io_desc[] __initdata = {
{
.virtual = SPBA0_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
.length = SPBA0_SIZE,
.type = MT_DEVICE_NONSHARED
}, {
.virtual = CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
.length = CS4_SIZE,
.virtual = MX31_CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
.length = MX31_CS4_SIZE,
.type = MT_DEVICE
}
};
......@@ -261,11 +258,13 @@ static void __init mxc_board_init(void)
mxc_register_device(&mxc_spi_device1, &spi1_pdata);
spi_register_board_info(&mc13783_spi_dev, 1);
#if defined(CONFIG_USB_ULPI)
/* USB */
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
#endif
/* SMSC9117 IRQ pin */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
......@@ -288,8 +287,8 @@ struct sys_timer mx31lite_timer = {
MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
/* Maintainer: Freescale Semiconductor, Inc. */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31lite_map_io,
.init_irq = mx31_init_irq,
......
arch/arm/mach-mx3/mx31moboard.c → arch/arm/mach-mx3/mach-mx31moboard.c
浏览文件 @ 37439a0f
......@@ -346,6 +346,8 @@ static struct fsl_usb2_platform_data usb_pdata = {
.phy_mode = FSL_USB2_PHY_ULPI,
};
#if defined(CONFIG_USB_ULPI)
#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
static int moboard_usbh2_hw_init(struct platform_device *pdev)
......@@ -392,8 +394,11 @@ static int __init moboard_usbh2_init(void)
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
return mxc_register_device(&mx31_usbh2, &usbh2_pdata);
return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
}
#else
static inline int moboard_usbh2_init(void) { return 0; }
#endif
static struct gpio_led mx31moboard_leds[] = {
......@@ -564,8 +569,8 @@ struct sys_timer mx31moboard_timer = {
MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
/* Maintainer: Valentin Longchamp, EPFL Mobots group */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
......
arch/arm/mach-mx3/mx35pdk.c → arch/arm/mach-mx3/mach-mx35pdk.c
浏览文件 @ 37439a0f
......@@ -106,8 +106,8 @@ struct sys_timer mx35pdk_timer = {
MACHINE_START(MX35_3DS, "Freescale MX35PDK")
/* Maintainer: Freescale Semiconductor, Inc */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX35_AIPS1_BASE_ADDR,
.io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx35_map_io,
.init_irq = mx35_init_irq,
......
arch/arm/mach-mx3/pcm037.c → arch/arm/mach-mx3/mach-pcm037.c
浏览文件 @ 37439a0f
......@@ -248,8 +248,8 @@ static struct imxuart_platform_data uart_pdata = {
static struct resource smsc911x_resources[] = {
{
.start = CS1_BASE_ADDR + 0x300,
.end = CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
.start = MX31_CS1_BASE_ADDR + 0x300,
.end = MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
......@@ -281,8 +281,8 @@ static struct platdata_mtd_ram pcm038_sram_data = {
};
static struct resource pcm038_sram_resource = {
.start = CS4_BASE_ADDR,
.end = CS4_BASE_ADDR + 512 * 1024 - 1,
.start = MX31_CS4_BASE_ADDR,
.end = MX31_CS4_BASE_ADDR + 512 * 1024 - 1,
.flags = IORESOURCE_MEM,
};
......@@ -322,16 +322,25 @@ static int pcm037_camera_power(struct device *dev, int on)
return 0;
}
static struct i2c_board_info pcm037_i2c_2_devices[] = {
static struct i2c_board_info pcm037_i2c_camera[] = {
{
I2C_BOARD_INFO("mt9t031", 0x5d),
}, {
I2C_BOARD_INFO("mt9v022", 0x48),
},
};
static struct soc_camera_link iclink = {
static struct soc_camera_link iclink_mt9v022 = {
.bus_id = 0, /* Must match with the camera ID */
.board_info = &pcm037_i2c_camera[1],
.i2c_adapter_id = 2,
.module_name = "mt9v022",
};
static struct soc_camera_link iclink_mt9t031 = {
.bus_id = 0, /* Must match with the camera ID */
.power = pcm037_camera_power,
.board_info = &pcm037_i2c_2_devices[0],
.board_info = &pcm037_i2c_camera[0],
.i2c_adapter_id = 2,
.module_name = "mt9t031",
};
......@@ -345,11 +354,19 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
}
};
static struct platform_device pcm037_camera = {
static struct platform_device pcm037_mt9t031 = {
.name = "soc-camera-pdrv",
.id = 0,
.dev = {
.platform_data = &iclink,
.platform_data = &iclink_mt9t031,
},
};
static struct platform_device pcm037_mt9v022 = {
.name = "soc-camera-pdrv",
.id = 1,
.dev = {
.platform_data = &iclink_mt9v022,
},
};
......@@ -449,7 +466,8 @@ static int __init pcm037_camera_alloc_dma(const size_t buf_size)
static struct platform_device *devices[] __initdata = {
&pcm037_flash,
&pcm037_sram_device,
&pcm037_camera,
&pcm037_mt9t031,
&pcm037_mt9v022,
};
static struct ipu_platform_data mx3_ipu_data = {
......@@ -518,8 +536,8 @@ static struct mx3fb_platform_data mx3fb_pdata = {
static struct resource pcm970_sja1000_resources[] = {
{
.start = CS5_BASE_ADDR,
.end = CS5_BASE_ADDR + 0x100 - 1,
.start = MX31_CS5_BASE_ADDR,
.end = MX31_CS5_BASE_ADDR + 0x100 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
......@@ -599,7 +617,7 @@ static void __init mxc_board_init(void)
if (!ret)
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
else
iclink.power = NULL;
iclink_mt9t031.power = NULL;
if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
mxc_register_device(&mx3_camera, &camera_pdata);
......@@ -618,8 +636,8 @@ struct sys_timer pcm037_timer = {
MACHINE_START(PCM037, "Phytec Phycore pcm037")
/* Maintainer: Pengutronix */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
......
arch/arm/mach-mx3/pcm043.c → arch/arm/mach-mx3/mach-pcm043.c
浏览文件 @ 37439a0f
......@@ -248,8 +248,8 @@ struct sys_timer pcm043_timer = {
MACHINE_START(PCM043, "Phytec Phycore pcm043")
/* Maintainer: Pengutronix */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX35_AIPS1_BASE_ADDR,
.io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx35_map_io,
.init_irq = mx35_init_irq,
......
arch/arm/mach-mx3/qong.c → arch/arm/mach-mx3/mach-qong.c
浏览文件 @ 37439a0f
......@@ -43,7 +43,7 @@
#define QONG_FPGA_VERSION(major, minor, rev) \
(((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
#define QONG_FPGA_BASEADDR CS1_BASE_ADDR
#define QONG_FPGA_BASEADDR MX31_CS1_BASE_ADDR
#define QONG_FPGA_PERIPH_SIZE (1 << 24)
#define QONG_FPGA_CTRL_BASEADDR QONG_FPGA_BASEADDR
......@@ -115,8 +115,8 @@ static struct physmap_flash_data qong_flash_data = {
};
static struct resource qong_flash_resource = {
.start = CS0_BASE_ADDR,
.end = CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
.start = MX31_CS0_BASE_ADDR,
.end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
.flags = IORESOURCE_MEM,
};
......@@ -180,8 +180,8 @@ static struct platform_nand_data qong_nand_data = {
};
static struct resource qong_nand_resource = {
.start = CS3_BASE_ADDR,
.end = CS3_BASE_ADDR + SZ_32M - 1,
.start = MX31_CS3_BASE_ADDR,
.end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
......@@ -198,9 +198,7 @@ static struct platform_device qong_nand_device = {
static void __init qong_init_nand_mtd(void)
{
/* init CS */
__raw_writel(0x00004f00, CSCR_U(3));
__raw_writel(0x20013b31, CSCR_L(3));
__raw_writel(0x00020800, CSCR_A(3));
mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800);
mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
/* enable pin */
......@@ -275,8 +273,8 @@ static struct sys_timer qong_timer = {
MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
/* Maintainer: DENX Software Engineering GmbH */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
......
arch/arm/mach-mx3/mm.c
浏览文件 @ 37439a0f
......@@ -65,6 +65,11 @@ static struct map_desc mxc_io_desc[] __initdata = {
.pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
.length = AIPS2_SIZE,
.type = MT_DEVICE_NONSHARED
}, {
.virtual = SPBA0_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
.length = SPBA0_SIZE,
.type = MT_DEVICE_NONSHARED
},
};
......
arch/arm/mach-mx3/mx31moboard-devboard.c
浏览文件 @ 37439a0f
......@@ -179,7 +179,7 @@ static int __init devboard_usbh1_init(void)
usbh1_pdata.otg = otg;
return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
}
/*
......
arch/arm/mach-mx3/mx31moboard-marxbot.c
浏览文件 @ 37439a0f
......@@ -294,7 +294,7 @@ static int __init marxbot_usbh1_init(void)
usbh1_pdata.otg = otg;
return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
}
/*
......
arch/arm/plat-mxc/Makefile
浏览文件 @ 37439a0f
......@@ -7,9 +7,13 @@ obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
CFLAGS_iomux-mx1-mx2.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
CFLAGS_dma-mx1-mx2.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_MXC_PWM) += pwm.o
obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
obj-$(CONFIG_MXC_ULPI) += ulpi.o
obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
CFLAGS_audmux-v1.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
CFLAGS_audmux-v2.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
arch/arm/plat-mxc/ehci.c
浏览文件 @ 37439a0f
......@@ -43,7 +43,7 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
unsigned int v;
if (cpu_is_mx31()) {
v = readl(IO_ADDRESS(MX31_OTG_BASE_ADDR +
v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
switch (port) {
......@@ -79,7 +79,7 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
break;
}
writel(v, IO_ADDRESS(MX31_OTG_BASE_ADDR +
writel(v, MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
return 0;
}
......
arch/arm/plat-mxc/include/mach/board-kzmarm11.h
浏览文件 @ 37439a0f
......@@ -21,19 +21,19 @@
/*
* KZM-ARM11-01 Board Control Registers on FPGA
*/
#define KZM_ARM11_CTL1 (CS4_BASE_ADDR + 0x1000)
#define KZM_ARM11_CTL2 (CS4_BASE_ADDR + 0x1001)
#define KZM_ARM11_RSW1 (CS4_BASE_ADDR + 0x1002)
#define KZM_ARM11_BACK_LIGHT (CS4_BASE_ADDR + 0x1004)
#define KZM_ARM11_FPGA_REV (CS4_BASE_ADDR + 0x1008)
#define KZM_ARM11_7SEG_LED (CS4_BASE_ADDR + 0x1010)
#define KZM_ARM11_LEDS (CS4_BASE_ADDR + 0x1020)
#define KZM_ARM11_DIPSW2 (CS4_BASE_ADDR + 0x1003)
#define KZM_ARM11_CTL1 (MX31_CS4_BASE_ADDR + 0x1000)
#define KZM_ARM11_CTL2 (MX31_CS4_BASE_ADDR + 0x1001)
#define KZM_ARM11_RSW1 (MX31_CS4_BASE_ADDR + 0x1002)
#define KZM_ARM11_BACK_LIGHT (MX31_CS4_BASE_ADDR + 0x1004)
#define KZM_ARM11_FPGA_REV (MX31_CS4_BASE_ADDR + 0x1008)
#define KZM_ARM11_7SEG_LED (MX31_CS4_BASE_ADDR + 0x1010)
#define KZM_ARM11_LEDS (MX31_CS4_BASE_ADDR + 0x1020)
#define KZM_ARM11_DIPSW2 (MX31_CS4_BASE_ADDR + 0x1003)
/*
* External UART for touch panel on FPGA
*/
#define KZM_ARM11_16550 (CS4_BASE_ADDR + 0x1050)
#define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050)
#endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */
arch/arm/plat-mxc/include/mach/board-mx31ads.h
浏览文件 @ 37439a0f
......@@ -14,7 +14,7 @@
#include <mach/hardware.h>
/* Base address of PBC controller */
#define PBC_BASE_ADDRESS IO_ADDRESS(CS4_BASE_ADDR)
#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT
/* Offsets for the PBC Controller register */
/* PBC Board status register offset */
......
arch/arm/plat-mxc/include/mach/hardware.h
浏览文件 @ 37439a0f
......@@ -22,6 +22,11 @@
#include <asm/sizes.h>
#define IMX_IO_ADDRESS(addr, module) \
((void __force __iomem *) \
(((unsigned long)((addr) - (module ## _BASE_ADDR)) < module ## _SIZE) ?\
(addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0))
#ifdef CONFIG_ARCH_MX3
#include <mach/mx3x.h>
#include <mach/mx31.h>
......
arch/arm/plat-mxc/include/mach/iomux-mx25.h
浏览文件 @ 37439a0f
......@@ -58,19 +58,19 @@
#define MX25_PAD_A18__A18 IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A18__GPIO_2_4 IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A18__FEC_COL IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTL)
#define MX25_PAD_A18__FEC_COL IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTRL)
#define MX25_PAD_A19__A19 IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A19__FEC_RX_ER IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTL)
#define MX25_PAD_A19__FEC_RX_ER IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTRL)
#define MX25_PAD_A19__GPIO_2_5 IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A20__A20 IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A20__GPIO_2_6 IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A20__FEC_RDATA2 IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTL)
#define MX25_PAD_A20__FEC_RDATA2 IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTRL)
#define MX25_PAD_A21__A21 IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A21__GPIO_2_7 IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A21__FEC_RDATA3 IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTL)
#define MX25_PAD_A21__FEC_RDATA3 IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTRL)
#define MX25_PAD_A22__A22 IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A22__GPIO_2_8 IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL)
......@@ -80,11 +80,11 @@
#define MX25_PAD_A24__A24 IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A24__GPIO_2_10 IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A24__FEC_RX_CLK IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTL)
#define MX25_PAD_A24__FEC_RX_CLK IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTRL)
#define MX25_PAD_A25__A25 IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A25__GPIO_2_11 IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_A25__FEC_CRS IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTL)
#define MX25_PAD_A25__FEC_CRS IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTRL)
#define MX25_PAD_EB0__EB0 IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_EB0__AUD4_TXD IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL)
......@@ -112,7 +112,7 @@
#define MX25_PAD_CS5__UART5_RTS IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL)
#define MX25_PAD_CS5__GPIO_3_21 IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_NF_CE0__NF_CE0 IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTL)
#define MX25_PAD_NF_CE0__NF_CE0 IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_NF_CE0__GPIO_3_22 IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_ECB__ECB IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL)
......@@ -229,28 +229,28 @@
#define MX25_PAD_LD7__GPIO_1_21 IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD8__LD8 IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTL)
#define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD9__LD9 IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTL)
#define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL)
#define MX25_PAD_LD10__LD10 IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTL)
#define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL)
#define MX25_PAD_LD11__LD11 IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTL)
#define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL)
#define MX25_PAD_LD12__LD12 IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTL)
#define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL)
#define MX25_PAD_LD13__LD13 IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTL)
#define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD14__LD14 IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTL)
#define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD15__LD15 IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTL)
#define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL)
#define MX25_PAD_HSYNC__HSYNC IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_HSYNC__GPIO_1_22 IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL)
......@@ -265,7 +265,7 @@
#define MX25_PAD_OE_ACD__GPIO_1_25 IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CONTRAST__CONTRAST IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_CONTRAST__FEC_CRS IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTL)
#define MX25_PAD_CONTRAST__FEC_CRS IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL)
#define MX25_PAD_PWM__PWM IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_PWM__GPIO_1_26 IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL)
......@@ -354,19 +354,19 @@
#define MX25_PAD_UART2_TXD__GPIO_4_27 IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_UART2_RTS__UART2_RTS IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_UART2_RTS__FEC_COL IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTL)
#define MX25_PAD_UART2_RTS__FEC_COL IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTRL)
#define MX25_PAD_UART2_RTS__GPIO_4_28 IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_UART2_CTS__FEC_RX_ER IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTL)
#define MX25_PAD_UART2_CTS__FEC_RX_ER IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTRL)
#define MX25_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_UART2_CTS__GPIO_4_29 IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
#define MX25_PAD_SD1_CMD__FEC_RDATA2 IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTL)
#define MX25_PAD_SD1_CMD__FEC_RDATA2 IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTRL)
#define MX25_PAD_SD1_CMD__GPIO_2_23 IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
#define MX25_PAD_SD1_CLK__FEC_RDATA3 IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTL)
#define MX25_PAD_SD1_CLK__FEC_RDATA3 IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTRL)
#define MX25_PAD_SD1_CLK__GPIO_2_24 IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
......@@ -377,11 +377,11 @@
#define MX25_PAD_SD1_DATA1__GPIO_2_26 IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
#define MX25_PAD_SD1_DATA2__FEC_RX_CLK IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTL)
#define MX25_PAD_SD1_DATA2__FEC_RX_CLK IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTRL)
#define MX25_PAD_SD1_DATA2__GPIO_2_27 IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
#define MX25_PAD_SD1_DATA3__FEC_CRS IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTL)
#define MX25_PAD_SD1_DATA3__FEC_CRS IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL)
#define MX25_PAD_SD1_DATA3__GPIO_2_28 IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_KPP_ROW0__KPP_ROW0 IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE)
......@@ -410,7 +410,7 @@
#define MX25_PAD_KPP_COL3__KPP_COL3 IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
#define MX25_PAD_KPP_COL3__GPIO_3_4 IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTL)
#define MX25_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_MDC__AUD4_TXD IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL)
#define MX25_PAD_FEC_MDC__GPIO_3_5 IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL)
......@@ -418,23 +418,23 @@
#define MX25_PAD_FEC_MDIO__AUD4_RXD IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL)
#define MX25_PAD_FEC_MDIO__GPIO_3_6 IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTL)
#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_TDATA0__GPIO_3_7 IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTL)
#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_TDATA1__AUD4_TXFS IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL)
#define MX25_PAD_FEC_TDATA1__GPIO_3_8 IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTL)
#define MX25_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_TX_EN__GPIO_3_9 IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
#define MX25_PAD_FEC_RDATA0__GPIO_3_10 IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
#define MX25_PAD_FEC_RDATA1__GPIO_3_11 IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
#define MX25_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
#define MX25_PAD_FEC_RX_DV__CAN2_RX IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP)
#define MX25_PAD_FEC_RX_DV__GPIO_3_12 IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL)
......
arch/arm/plat-mxc/include/mach/mx1.h
浏览文件 @ 37439a0f
......@@ -9,8 +9,8 @@
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MXC_MX1_H__
#define __ASM_ARCH_MXC_MX1_H__
#ifndef __MACH_MX1_H__
#define __MACH_MX1_H__
#include <mach/vmalloc.h>
......@@ -161,4 +161,4 @@
#define DMA_REQ_UART1_T 30
#define DMA_REQ_UART1_R 31
#endif /* __ASM_ARCH_MXC_MX1_H__ */
#endif /* ifndef __MACH_MX1_H__ */
arch/arm/plat-mxc/include/mach/mx21.h
浏览文件 @ 37439a0f
......@@ -22,8 +22,8 @@
* MA 02110-1301, USA.
*/
#ifndef __ASM_ARCH_MXC_MX21_H__
#define __ASM_ARCH_MXC_MX21_H__
#ifndef __MACH_MX21_H__
#define __MACH_MX21_H__
#define MX21_AIPI_BASE_ADDR 0x10000000
#define MX21_AIPI_BASE_ADDR_VIRT 0xf4000000
......@@ -92,6 +92,11 @@
#define MX21_IRAM_BASE_ADDR 0xffffe800 /* internal ram */
#define MX21_IO_ADDRESS(x) ( \
IMX_IO_ADDRESS(x, MX21_AIPI) ?: \
IMX_IO_ADDRESS(x, MX21_SAHB1) ?: \
IMX_IO_ADDRESS(x, MX21_X_MEMC))
/* fixed interrupt numbers */
#define MX21_INT_CSPI3 6
#define MX21_INT_GPIO 8
......@@ -179,6 +184,7 @@
#define MX21_DMA_REQ_CSI_STAT 30
#define MX21_DMA_REQ_CSI_RX 31
#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
/* these should go away */
#define SDRAM_BASE_ADDR MX21_SDRAM_BASE_ADDR
#define CSD1_BASE_ADDR MX21_CSD1_BASE_ADDR
......@@ -211,5 +217,6 @@
#define DMA_REQ_FIRI_RX MX21_DMA_REQ_FIRI_RX
#define DMA_REQ_BMI_TX MX21_DMA_REQ_BMI_TX
#define DMA_REQ_BMI_RX MX21_DMA_REQ_BMI_RX
#endif
#endif /* __ASM_ARCH_MXC_MX21_H__ */
#endif /* ifndef __MACH_MX21_H__ */
arch/arm/plat-mxc/include/mach/mx25.h
浏览文件 @ 37439a0f
......@@ -22,23 +22,16 @@
#define MX25_GPIO3_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000)
#define MX25_GPIO4_BASE_ADDR_VIRT (MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000)
#define MX25_AIPS1_IO_ADDRESS(x) \
(((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
#define MX25_AIPS2_IO_ADDRESS(x) \
(((x) - MX25_AIPS2_BASE_ADDR) + MX25_AIPS2_BASE_ADDR_VIRT)
#define MX25_AVIC_IO_ADDRESS(x) \
(((x) - MX25_AVIC_BASE_ADDR) + MX25_AVIC_BASE_ADDR_VIRT)
#define __in_range(addr, name) ((addr) >= name##_BASE_ADDR && (addr) < name##_BASE_ADDR + name##_SIZE)
#define MX25_IO_ADDRESS(x) \
(void __force __iomem *) \
(__in_range(x, MX25_AIPS1) ? MX25_AIPS1_IO_ADDRESS(x) : \
__in_range(x, MX25_AIPS2) ? MX25_AIPS2_IO_ADDRESS(x) : \
__in_range(x, MX25_AVIC) ? MX25_AVIC_IO_ADDRESS(x) : \
0xDEADBEEF)
#define MX25_IO_ADDRESS(x) ( \
IMX_IO_ADDRESS(x, MX25_AIPS1) ?: \
IMX_IO_ADDRESS(x, MX25_AIPS2) ?: \
IMX_IO_ADDRESS(x, MX25_AVIC))
#define UART1_BASE_ADDR 0x43f90000
#define UART2_BASE_ADDR 0x43f94000
#endif /* __MACH_MX25_H__ */
#define MX25_FEC_BASE_ADDR 0x50038000
#define MX25_INT_FEC 57
#endif /* ifndef __MACH_MX25_H__ */
arch/arm/plat-mxc/include/mach/mx27.h
浏览文件 @ 37439a0f
......@@ -21,8 +21,12 @@
* MA 02110-1301, USA.
*/
#ifndef __ASM_ARCH_MXC_MX27_H__
#define __ASM_ARCH_MXC_MX27_H__
#ifndef __MACH_MX27_H__
#define __MACH_MX27_H__
#ifndef __ASSEMBLER__
#include <linux/io.h>
#endif
#define MX27_AIPI_BASE_ADDR 0x10000000
#define MX27_AIPI_BASE_ADDR_VIRT 0xf4000000
......@@ -109,11 +113,31 @@
#define MX27_M3IF_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x3000)
#define MX27_PCMCIA_CTL_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x4000)
#define MX27_WEIM_CSCRx_BASE_ADDR(cs) (MX27_WEIM_BASE_ADDR + (cs) * 0x10)
#define MX27_WEIM_CSCRxU(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs))
#define MX27_WEIM_CSCRxL(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
#define MX27_WEIM_CSCRxA(cs) (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
#define MX27_PCMCIA_MEM_BASE_ADDR 0xdc000000
/* IRAM */
#define MX27_IRAM_BASE_ADDR 0xffff4c00 /* internal ram */
#define MX27_IO_ADDRESS(x) ( \
IMX_IO_ADDRESS(x, MX27_AIPI) ?: \
IMX_IO_ADDRESS(x, MX27_SAHB1) ?: \
IMX_IO_ADDRESS(x, MX27_X_MEMC))
#ifndef __ASSEMBLER__
static inline void mx27_setup_weimcs(size_t cs,
unsigned upper, unsigned lower, unsigned addional)
{
__raw_writel(upper, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(cs)));
__raw_writel(lower, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(cs)));
__raw_writel(addional, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(cs)));
}
#endif
/* fixed interrupt numbers */
#define MX27_INT_I2C2 1
#define MX27_INT_GPT6 2
......@@ -225,6 +249,7 @@
extern int mx27_revision(void);
#endif
#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
/* these should go away */
#define MSHC_BASE_ADDR MX27_MSHC_BASE_ADDR
#define GPT5_BASE_ADDR MX27_GPT5_BASE_ADDR
......@@ -292,5 +317,6 @@ extern int mx27_revision(void);
#define DMA_REQ_UART6_RX MX27_DMA_REQ_UART6_RX
#define DMA_REQ_SDHC3 MX27_DMA_REQ_SDHC3
#define DMA_REQ_NFC MX27_DMA_REQ_NFC
#endif
#endif /* __ASM_ARCH_MXC_MX27_H__ */
#endif /* ifndef __MACH_MX27_H__ */
arch/arm/plat-mxc/include/mach/mx2x.h
浏览文件 @ 37439a0f
......@@ -20,8 +20,8 @@
* MA 02110-1301, USA.
*/
#ifndef __ASM_ARCH_MXC_MX2x_H__
#define __ASM_ARCH_MXC_MX2x_H__
#ifndef __MACH_MX2x_H__
#define __MACH_MX2x_H__
/* The following addresses are common between i.MX21 and i.MX27 */
......@@ -176,6 +176,7 @@
#define MX2x_DMA_REQ_CSI_STAT 30
#define MX2x_DMA_REQ_CSI_RX 31
#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
/* these should go away */
#define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR
#define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT
......@@ -287,5 +288,6 @@
#define DMA_REQ_UART1_TX MX2x_DMA_REQ_UART1_TX
#define DMA_REQ_CSI_STAT MX2x_DMA_REQ_CSI_STAT
#define DMA_REQ_CSI_RX MX2x_DMA_REQ_CSI_RX
#endif
#endif /* __ASM_ARCH_MXC_MX2x_H__ */
#endif /* ifndef __MACH_MX2x_H__ */
arch/arm/plat-mxc/include/mach/mx31.h
浏览文件 @ 37439a0f
#ifndef __MACH_MX31_H__
#define __MACH_MX31_H__
#ifndef __ASSEMBLER__
#include <linux/io.h>
#endif
/*
* IRAM
*/
......@@ -107,8 +114,30 @@
#define MX31_EMI_CTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x4000)
#define MX31_PCMCIA_CTL_BASE_ADDR MX31_EMI_CTL_BASE_ADDR
#define MX31_WEIM_CSCRx_BASE_ADDR(cs) (MX31_WEIM_BASE_ADDR + (cs) * 0x10)
#define MX31_WEIM_CSCRxU(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs))
#define MX31_WEIM_CSCRxL(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
#define MX31_WEIM_CSCRxA(cs) (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
#define MX31_PCMCIA_MEM_BASE_ADDR 0xbc000000
#define MX31_IO_ADDRESS(x) ( \
IMX_IO_ADDRESS(x, MX31_AIPS1) ?: \
IMX_IO_ADDRESS(x, MX31_AIPS2) ?: \
IMX_IO_ADDRESS(x, MX31_AVIC) ?: \
IMX_IO_ADDRESS(x, MX31_X_MEMC) ?: \
IMX_IO_ADDRESS(x, MX31_SPBA0))
#ifndef __ASSEMBLER__
static inline void mx31_setup_weimcs(size_t cs,
unsigned upper, unsigned lower, unsigned addional)
{
__raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs)));
__raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs)));
__raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs)));
}
#endif
#define MX31_INT_I2C3 3
#define MX31_INT_I2C2 4
#define MX31_INT_MPEG4_ENCODER 5
......@@ -186,6 +215,7 @@
#define MX31_SYSTEM_REV_MIN MX31_CHIP_REV_1_0
#define MX31_SYSTEM_REV_NUM 3
#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
/* these should go away */
#define ATA_BASE_ADDR MX31_ATA_BASE_ADDR
#define UART4_BASE_ADDR MX31_UART4_BASE_ADDR
......@@ -216,3 +246,6 @@
#define MXC_INT_UART5 MX31_INT_UART5
#define MXC_INT_CCM MX31_INT_CCM
#define MXC_INT_PCMCIA MX31_INT_PCMCIA
#endif
#endif /* ifndef __MACH_MX31_H__ */
arch/arm/plat-mxc/include/mach/mx35.h
浏览文件 @ 37439a0f
#ifndef __MACH_MX35_H__
#define __MACH_MX35_H__
/*
* IRAM
*/
......@@ -104,6 +106,13 @@
#define MX35_NFC_BASE_ADDR 0xbb000000
#define MX35_PCMCIA_MEM_BASE_ADDR 0xbc000000
#define MX35_IO_ADDRESS(x) ( \
IMX_IO_ADDRESS(x, MX35_AIPS1) ?: \
IMX_IO_ADDRESS(x, MX35_AIPS2) ?: \
IMX_IO_ADDRESS(x, MX35_AVIC) ?: \
IMX_IO_ADDRESS(x, MX35_X_MEMC) ?: \
IMX_IO_ADDRESS(x, MX35_SPBA0))
/*
* Interrupt numbers
*/
......@@ -180,6 +189,7 @@
#define MX35_SYSTEM_REV_MIN MX35_CHIP_REV_1_0
#define MX35_SYSTEM_REV_NUM 3
#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
/* these should go away */
#define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR
#define MXC_INT_OWIRE MX35_INT_OWIRE
......@@ -195,3 +205,6 @@
#define MXC_INT_MLB MX35_INT_MLB
#define MXC_INT_SPDIF MX35_INT_SPDIF
#define MXC_INT_FEC MX35_INT_FEC
#endif
#endif /* ifndef __MACH_MX35_H__ */
arch/arm/plat-mxc/include/mach/mx3x.h
浏览文件 @ 37439a0f
......@@ -8,8 +8,8 @@
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MXC_MX31_H__
#define __ASM_ARCH_MXC_MX31_H__
#ifndef __MACH_MX3x_H__
#define __MACH_MX3x_H__
/*
* MX31 memory map:
......@@ -269,6 +269,7 @@ static inline int mx31_revision(void)
}
#endif
#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
/* these should go away */
#define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR
#define L2CC_SIZE MX3x_L2CC_SIZE
......@@ -401,5 +402,6 @@ static inline int mx31_revision(void)
#define CHIP_REV_3_2 MX3x_CHIP_REV_3_2
#define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN
#define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM
#endif
#endif /* __ASM_ARCH_MXC_MX31_H__ */
#endif /* ifndef __MACH_MX3x_H__ */
arch/arm/plat-mxc/include/mach/mxc.h
浏览文件 @ 37439a0f
......@@ -121,9 +121,10 @@ extern unsigned int __mxc_cpu_type;
#endif
#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10)
#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4)
#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
/* These are deprecated, use mx[23][157]_setup_weimcs instead. */
#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10))
#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x4))
#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x8))
#endif
#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231())
......
arch/arm/plat-mxc/include/mach/uncompress.h
浏览文件 @ 37439a0f
/*
* arch/arm/plat-mxc/include/mach/uncompress.h
*
*
*
* Copyright (C) 1999 ARM Limited
* Copyright (C) Shane Nay (shane@minirl.com)
*
......@@ -25,7 +23,6 @@
#define __MXC_BOOT_UNCOMPRESS
#include <mach/hardware.h>
#include <asm/mach-types.h>
static unsigned long uart_base;
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或