Add support for new FW command QUERY_VNIC_ENV.
The command is used by the driver to query vnic diagnostic statistics
from FW.
Signed-off-by: NMoshe Shemesh <moshe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Implement set/get functions to configure PFC stall prevention
timeout by tunables api through ethtool.
By default the stall prevention timeout is configured to 8 sec.
Timeout range is: 80-8000 msec.

Enabling stall prevention with the auto timeout will set
the timeout to 100 msec.
Signed-off-by: NInbar Karmy <inbark@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add the needed capability bit and counters to device spec description.
Expose the following two counters in ethtool:

tx_pause_storm_warning_events: when the device is stalled for a period
longer than a pre-configured watermark, the counter increase, allowing
the debug utility an insight into current device status.

tx_pause_storm_error_events: when the device is stalled for a period
longer than a pre-configured timeout, the pause transmission is disabled,
and the counter increase.
Signed-off-by: NInbar Karmy <inbark@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add helper functions that check if a protocol is
part of a flow steering match criteria.
Signed-off-by: NBoris Pismenny <borisp@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NAviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Currently, we don't support egress flow steering namespace in mlx5
flow steering core implementation. However, when we want to encrypt
a packet, we model it as a flow steering rule in the egress path.
To overcome this, we add an empty egress namespace to flow steering.
This namespace is initialized only when ipsec support exists.
In the future, this will grow to a full blown full steering
implementation, resembling the ingress path.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NAviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Allow to specify the size of the hairpin queues along with the
packet buffer data size from the core setup code.

If the driver doesn't provide this, the FW applies proper value that
matches the provided data size and a FW chosen RQ stride size.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

The latest merge between net and net-next introduced a complier assert in
mlx5 driver.  In hca_cap_bits older fields are kept along with newer
fields that should have replaced them.

Fixes: c02b3741 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net")
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are systems platform information management interfaces (such as
HOST2BMC) for which we cannot disable local loopback multicast traffic.

Separate disable_local_lb_mc and disable_local_lb_uc capability bits so
driver will not disable multicast loopback traffic if not supported.
(It is expected that Firmware will not set disable_local_lb_mc if
HOST2BMC is running for example.)

Function mlx5_nic_vport_update_local_lb will do best effort to
disable/enable UC/MC loopback traffic and return success only in case it
succeeded to changed all allowed by Firmware.

Adapt mlx5_ib and mlx5e to support the new cap bits.

Fixes: 2c43c5a0 ("net/mlx5e: Enable local loopback in loopback selftest")
Fixes: c85023e1 ("IB/mlx5: Add raw ethernet local loopback support")
Fixes: bded747b ("net/mlx5: Add raw ethernet local loopback firmware command")
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add hairpin definitions to the IFC file.

This includes the HCA ID, few HCA hairpin capabilities, new
fields in RQ/SQ used later for the pairing and the WQ hairpin
data size attribute.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

When mlx5_ib_add is called determine if the mlx5 core device being
added is capable of dual port RoCE operation. If it is, determine
whether it is a master device or a slave device using the
num_vhca_ports and affiliate_nic_vport_criteria capabilities.

If the device is a slave, attempt to find a master device to affiliate it
with. Devices that can be affiliated will share a system image guid. If
none are found place it on a list of unaffiliated ports. If a master is
found bind the port to it by configuring the port affiliation in the NIC
vport context.

Similarly when mlx5_ib_remove is called determine the port type. If it's
a slave port, unaffiliate it from the master device, otherwise just
remove it from the unaffiliated port list.

The IB device is registered as a multiport device, even if a 2nd port is
not available for affiliation. When the 2nd port is affiliated later the
GID cache must be refreshed in order to get the default GIDs for the 2nd
port in the cache. Export roce_rescan_device to provide a mechanism to
refresh the cache after a new port is bound.

In a multiport configuration all IB object (QP, MR, PD, etc) related
commands should flow through the master mlx5_core_dev, other commands
must be sent to the slave port mlx5_core_mdev, an interface is provide
to get the correct mdev for non IB object commands.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Generate a unique 128bit identifier for each host and pass that value to
firmware in the INIT_HCA command if it reports the sw_owner_id
capability. Each device bound to the mlx5_core driver will have the same
software owner ID.

In subsequent patches mlx5_core devices will be bound via a new VPort
command so that they can operate together under a single InfiniBand
device. Only devices that have the same software owner ID can be bound,
to prevent traffic intended for one host arriving at another.

The INIT_HCA command length was expanded by 128 bits. The command
length is provided as an input FW commands. Older FW does not have a
problem receiving this command in the new longer form.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

In mlx5_ifc, struct size was not complete, and thus driver was sending
garbage after the last defined field. Fixed it by adding reserved field
to complete the struct size.

In addition, rename all set_rate_limit to set_pp_rate_limit to be
compliant with the Firmware <-> Driver definition.

Fixes: 7486216b ("{net,IB}/mlx5: mlx5_ifc updates")
Fixes: 1466cc5b ("net/mlx5: Rate limit tables support")
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

The QPTS register allows changing the priority trust state between pcp and
dscp. Add support to get/set trust state from device. When the port is
in pcp/dscp trust state, packet is routed by hardware to matching priority
based on its pcp/dscp value respectively.

The QPDPM register allow channing the dscp to priority mapping. Add support
to get/set dscp to priority mapping from device.
Note that to change a dscp mapping, the "e" bit of this dscp structure
must be set in the QPDPM firmware command.
Signed-off-by: NHuy Nguyen <huyn@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

The QCAM register provides capability bit for all the QoS registers
using ACCESS_REG command.
Signed-off-by: NHuy Nguyen <huyn@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

This patch updates the mlx5_ifc with the following:
- Fix tunnel_stateless_gre typo.
- max_geneve_opt_len - Maximum geneve options length.
- tunnel_stateless_geneve_rx - If set, receive Stateless
  Offloads for Geneve tunneled (inner) packets are supported.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Adding new bits in mlx5_ifc_cmd_hca_cap to get the hardware capabilities
for:
 - compression_128: Support 128B CQE compression
 - cqe_128_always: Support 128B CQE padding
Signed-off-by: NGuy Levi <guyle@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Allow creation of a multi-packet receive queue.

In order to create a multi-packet RQ, the following fields in
the mlx5_ib_rwq should be set:
- log_num_strides: Log of number of strides per WQE
- single_stride_log_num_of_bytes: Log of a single stride size
- two_byte_shift_en: When enabled, hardware pads 2 bytes of zeros
  before writing the message to memory (e.g. for the IP alignment).
Signed-off-by: NNoa Osherovich <noaos@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Added check for the maximal number of flow counters attached
to rule (FTE).

Fixes: bd5251db ('net/mlx5_core: Introduce flow steering destination of type counter')
Signed-off-by: NRaed Salem <raeds@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add TX offloads support for GRE tunneled packets by reporting the needed
netdev features.
Signed-off-by: NGal Pressman <galp@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

* add offload_type field to mlx5_ifc_qpc_bits
* update mlx5_ifc_xrqc_bits layout
Signed-off-by: NArtemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: NYossi Itigin <yosefe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Expose enhanced multi packet WQE capability to user space through
query_device by uhw.
Signed-off-by: NBodong Wang <bodong@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Set the field to allow posting multi packet send WQEs if hardware
supports this feature. This doesn't mean the send WQEs will be for
multi packet unless the send WQE was prepared according to multi
packet send WQE format.

User space shall use flag MLX5_IB_ALLOW_MPW to check if hardware
supports MPW and allows MPW in SQ context.
Signed-off-by: NBodong Wang <bodong@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Set underlay QPN as part of flow rule when it's applicable.

There is one root flow table in the NIC RX namespace and all the
underlay QPs steer the traffic to this flow table.
In order to prevent QP to get traffic which is not target to its
underlay QP, we need to set the underlay QP number as part of
the steering matching.

Note:
When multicast traffic is sent the QPN filtering is done by the firmware
as some early step. Adding the QPN match on the flow table entry is
wrong as by that time the target QPN holds the multicast address (e.g.
FF(s)) and it won't match.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add outbound_pci_buffer_overflow to ethtool output for monitoring the
number of packets that were dropped due to lack of PCIe buffers on
receive path from NIC port toward the host(s).

This counter is valid only in case that tx_overflow_buffer_pkt is
supported in MCAM enhanced features.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add capability bit in PCAM register and counters to PPCNT register.
Signed-off-by: NGal Pressman <galp@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add capability bit in MCAM register and counters to MPCNT register.
Signed-off-by: NGal Pressman <galp@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Read new NIC capability field which represnts 16 MSBs of the max flow
counters number supported (max_flow_counter_31_16).

Backward compatibility with older firmware is preserved, the modified
driver reads max_flow_counter_31_16 as 0 from the older firmware and
uses up to 64K counters.

Changed flow counter id from 16 bits to 32 bits. Backward compatibility
with older firmware is preserved as we kept the 16 LSBs of the counter
id in place and added 16 MSBs from reserved field.

Changed the background bulk reading of flow counters to work in chunks
of at most 32K counters, to make sure we don't attempt to allocate very
large buffers.
Signed-off-by: NRabie Loulou <rabiel@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

The counter list hardware structure doesn't contain a clear and
num_of_counters fields, remove them.

These wrong fields were never used by the driver hence no other driver
changes.

Fixes: a351a1b0 ("net/mlx5: Introduce bulk reading of flow counters")
Signed-off-by: NRabie Loulou <rabiel@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

In order to mark relevant fields while setting the MTPPS register
add field select. Otherwise it can cause a misconfiguration in
firmware.

Fixes: ee7f1220 ('net/mlx5e: Implement 1PPS support')
Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Fix miscalculation in reserved_at_1a0 field.

Fixes: ee7f1220 ('net/mlx5e: Implement 1PPS support')
Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

This patch adds below requester and responder side error counters,
which will be exposed by hardware counters interface and are supported
as part of query Q counters command extension.

 +---------------------------+-------------------------------------+
 |      Name                 |           Description               |
 |---------------------------+-------------------------------------|
 |resp_local_length_error    | Number of times responder detected  |
 |                           | local length errors                 |
 |---------------------------+-------------------------------------|
 |resp_cqe_error             | Number of CQEs completed with error |
 |                           | at responder                        |
 |---------------------------+-------------------------------------|
 |req_cqe_error              | Number of CQEs completed with error |
 |                           | at requester                        |
 |---------------------------+-------------------------------------|
 |req_remote_invalid_request | Number of times requester detected  |
 |                           | remote invalid request error        |
 |---------------------------+-------------------------------------|
 |req_remote_access_error    | Number of times requester detected  |
 |                           | remote access error                 |
 |---------------------------+-------------------------------------|
 |resp_remote_access_error   | Number of times responder detected  |
 |                           | remote access error                 |
 |---------------------------+-------------------------------------|
 |resp_cqe_flush_error       | Number of CQEs completed with       |
 |                           | flushed with error at responder     |
 |---------------------------+-------------------------------------|
 |req_cqe_flush_error        | Number of CQEs completed with       |
 |                           | flushed with error at requester     |
 +---------------------------+-------------------------------------+
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

RQs that were configured for "delay drop" will prevent packet drops
when their WQEs are depleted.
Marking an RQ to be drop-less is done by setting delay_drop_en in RQ
context using CREATE_RQ command.

Since this feature is globally activated/deactivated by using the
SET_DELAY_DROP command on all the marked RQs, we activated/deactivated
it according to the number of RQs with 'delay_drop' enabled.

When timeout is expired, then the feature is deactivated. Therefore
the driver handles the delay drop timeout event and reactivate it.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When delay drop timeout is expired, the firmware raises
general notification event of DELAY_DROP_TIMEOUT subtype.
In addition the feature is disable so the driver have to
reactivate the timeout.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support to SET_DELAY_DROP command.

This command will be used in downstream patches for delay packet drop.
The timeout value should be indicated by delay_drop_timeout field.
Packet processing will be delayed till timeout value passed or until
more WQEs are posted.

Setting this value to 0 disables the feature.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds debug control parameters for congestion control which
can be read or written through debugfs. They are for reaction point and
notification point nodes.

These control parameters are as below:
 +------------------------------+-----------------------------------------+
 |      Name                    |           Description                   |
 |------------------------------+-----------------------------------------|
 |rp_clamp_tgt_rate             | When set target rate is updated to      |
 |                              | current rate                            |
 |------------------------------+-----------------------------------------|
 |rp_clamp_tgt_rate_ati         | When set update target rate based on    |
 |                              | timer as well                           |
 |------------------------------+-----------------------------------------|
 |rp_time_reset                 | time between rate increase if no        |
 |                              | CNP is received unit in usec            |
 |------------------------------+-----------------------------------------|
 |rp_byte_reset                 | Number of bytes between rate inease if  |
 |                              | no CNP is received                      |
 |------------------------------+-----------------------------------------|
 |rp_threshold                  | Threshold for reaction point rate       |
 |                              | control                                 |
 |------------------------------+-----------------------------------------|
 |rp_ai_rate                    | Rate for target rate, unit in Mbps      |
 |------------------------------+-----------------------------------------|
 |rp_hai_rate                   | Rate for hyper increase state           |
 |                              | unit in Mbps                            |
 |------------------------------+-----------------------------------------|
 |rp_min_dec_fac                | Minimum factor by which the current     |
 |                              | transmit rate can be changed when       |
 |                              | processing a CNP, unit is percerntage   |
 |------------------------------+-----------------------------------------|
 |rp_min_rate                   | Minimum value for rate limit,           |
 |                              | unit in Mbps                            |
 |------------------------------+-----------------------------------------|
 |rp_rate_to_set_on_first_cnp   | Rate that is set when first CNP is      |
 |                              | received, unit is Mbps                  |
 |------------------------------+-----------------------------------------|
 |rp_dce_tcp_g                  | Used to calculate alpha                 |
 |------------------------------+-----------------------------------------|
 |rp_dce_tcp_rtt                | Time between updates of alpha value,    |
 |                              | unit is usec                            |
 |------------------------------+-----------------------------------------|
 |rp_rate_reduce_monitor_period | Minimum time between consecutive rate   |
 |                              | reductions                              |
 |------------------------------+-----------------------------------------|
 |rp_initial_alpha_value        | Initial value of alpha                  |
 |------------------------------+-----------------------------------------|
 |rp_gd                         | When CNP is received, flow rate is      |
 |                              | reduced based on gd, rp_gd is given as  |
 |                              | log2(rp_gd)                             |
 |------------------------------+-----------------------------------------|
 |np_cnp_dscp                   | dscp code point for generated cnp       |
 |------------------------------+-----------------------------------------|
 |np_cnp_prio_mode              | 802.1p priority for generated cnp       |
 |------------------------------+-----------------------------------------|
 |np_cnp_prio                   | cnp priority mode                       |
 +------------------------------+-----------------------------------------+
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support for raw ethernet local loopback firmware command.
Signed-off-by: NHuy Nguyen <huyn@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add Innova IPSec ESP crypto offload configuration paths.
Detect Innova IPSec device and set the NETIF_F_HW_ESP flag.
Configure Security Associations using the API introduced in a previous
patch.

Add Software-parser hardware descriptor layout
Software-Parser (swp) is a hardware feature in ConnectX which allows the
host software to specify protocol header offsets in the TX path, thus
overriding the hardware parser.
This is useful for protocols that the ASIC may not be able to parse on
its own.

Note that due to inline metadata, XDP is not supported in Innova IPSec.
Signed-off-by: NIlan Tayari <ilant@mellanox.com>
Signed-off-by: NYossi Kuperman <yossiku@mellanox.com>
Signed-off-by: NYevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: NBoris Pismenny <borisp@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add interface to initialize and interact with Innova FPGA SBU
connections.
A client driver may use these functions to set up a high-speed DMA
connection with its SBU hardware logic, and send/receive messages
over this connection.

A later patch in this patchset will make use of these functions for
Innova IPSec offload in mlx5 Ethernet driver.

Add commands to retrieve Innova FPGA SBU capabilities, and to
read/write Innova FPGA configuration space registers and memory,
over internal I2C.

At high level, the FPGA configuration space is divided such:
 0x00000000 - 0x007fffff is reserved for the SBU
 0x00800000 - 0xffffffff is reserved for the Shell
0x400000000 - ...        is DDR memory

A later patchset will add support for accessing FPGA CrSpace and memory
over a high-speed connection. This is the reason for the ACCESS_TYPE
enumeration, which currently only supports I2C.
Signed-off-by: NIlan Tayari <ilant@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

The FPGA QP is a high-bandwidth communication channel between the host
CPU and the FPGA device. It allows performing DMA operations between
host memory and the FPGA logic via the ConnectX chip.

Add ConnectX FW commands which create and manipulate FPGA QPs.
Signed-off-by: NIlan Tayari <ilant@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

The offending commit pushed fwd the field by two bits but
didn't increment the offset, fix that. Currently, no damage
was done b/c this is just a field name, but lets have it right.

Fixes: f32f5bd2 ('net/mlx5: Configure cache line size for start and end padding')
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reported-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>