提交 efae7f78 编写于 作者: E Eran Ben Elisha 提交者: Saeed Mahameed

net/mlx5e: Add outbound PCI buffer overflow counter

Add outbound_pci_buffer_overflow to ethtool output for monitoring the
number of packets that were dropped due to lack of PCIe buffers on
receive path from NIC port toward the host(s).

This counter is valid only in case that tx_overflow_buffer_pkt is
supported in MCAM enhanced features.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
上级 068aef33
......@@ -250,9 +250,13 @@ static void mlx5e_fill_stats_strings(struct mlx5e_priv *priv, uint8_t *data)
strcpy(data + (idx++) * ETH_GSTRING_LEN,
pcie_perf_stats_desc[i].format);
for (i = 0; i < NUM_PCIE_PERF_STALL_COUNTERS(priv); i++)
for (i = 0; i < NUM_PCIE_PERF_COUNTERS64(priv); i++)
strcpy(data + (idx++) * ETH_GSTRING_LEN,
pcie_perf_stall_stats_desc[i].format);
pcie_perf_stats_desc64[i].format);
for (i = 0; i < NUM_PCIE_PERF_STALL_COUNTERS(priv); i++)
strcpy(data + (idx++) * ETH_GSTRING_LEN,
pcie_perf_stall_stats_desc[i].format);
for (prio = 0; prio < NUM_PPORT_PRIO; prio++) {
for (i = 0; i < NUM_PPORT_PER_PRIO_TRAFFIC_COUNTERS; i++)
......@@ -389,6 +393,10 @@ void mlx5e_ethtool_get_ethtool_stats(struct mlx5e_priv *priv,
data[idx++] = MLX5E_READ_CTR32_BE(&priv->stats.pcie.pcie_perf_counters,
pcie_perf_stats_desc, i);
for (i = 0; i < NUM_PCIE_PERF_COUNTERS64(priv); i++)
data[idx++] = MLX5E_READ_CTR64_BE(&priv->stats.pcie.pcie_perf_counters,
pcie_perf_stats_desc64, i);
for (i = 0; i < NUM_PCIE_PERF_STALL_COUNTERS(priv); i++)
data[idx++] = MLX5E_READ_CTR32_BE(&priv->stats.pcie.pcie_perf_counters,
pcie_perf_stall_stats_desc, i);
......
......@@ -307,6 +307,12 @@ static const struct counter_desc pport_eth_ext_stats_desc[] = {
MLX5_GET(mpcnt_reg, (pcie_stats)->pcie_perf_counters, \
counter_set.pcie_perf_cntrs_grp_data_layout.c)
#define PCIE_PERF_OFF64(c) \
MLX5_BYTE_OFF(mpcnt_reg, counter_set.pcie_perf_cntrs_grp_data_layout.c##_high)
#define PCIE_PERF_GET64(pcie_stats, c) \
MLX5_GET64(mpcnt_reg, (pcie_stats)->pcie_perf_counters, \
counter_set.pcie_perf_cntrs_grp_data_layout.c##_high)
struct mlx5e_pcie_stats {
__be64 pcie_perf_counters[MLX5_ST_SZ_QW(mpcnt_reg)];
};
......@@ -316,6 +322,10 @@ static const struct counter_desc pcie_perf_stats_desc[] = {
{ "tx_pci_signal_integrity", PCIE_PERF_OFF(tx_errors) },
};
static const struct counter_desc pcie_perf_stats_desc64[] = {
{ "outbound_pci_buffer_overflow", PCIE_PERF_OFF64(tx_overflow_buffer_pkt) },
};
static const struct counter_desc pcie_perf_stall_stats_desc[] = {
{ "outbound_pci_stalled_rd", PCIE_PERF_OFF(outbound_stalled_reads) },
{ "outbound_pci_stalled_wr", PCIE_PERF_OFF(outbound_stalled_writes) },
......@@ -415,6 +425,9 @@ static const struct counter_desc sq_stats_desc[] = {
#define NUM_PCIE_PERF_COUNTERS(priv) \
(ARRAY_SIZE(pcie_perf_stats_desc) * \
MLX5_CAP_MCAM_FEATURE((priv)->mdev, pcie_performance_group))
#define NUM_PCIE_PERF_COUNTERS64(priv) \
(ARRAY_SIZE(pcie_perf_stats_desc64) * \
MLX5_CAP_MCAM_FEATURE((priv)->mdev, tx_overflow_buffer_pkt))
#define NUM_PCIE_PERF_STALL_COUNTERS(priv) \
(ARRAY_SIZE(pcie_perf_stall_stats_desc) * \
MLX5_CAP_MCAM_FEATURE((priv)->mdev, pcie_outbound_stalled))
......@@ -433,6 +446,7 @@ static const struct counter_desc sq_stats_desc[] = {
NUM_PPORT_PRIO + \
NUM_PPORT_ETH_EXT_COUNTERS(priv))
#define NUM_PCIE_COUNTERS(priv) (NUM_PCIE_PERF_COUNTERS(priv) + \
NUM_PCIE_PERF_COUNTERS64(priv) +\
NUM_PCIE_PERF_STALL_COUNTERS(priv))
#define NUM_RQ_STATS ARRAY_SIZE(rq_stats_desc)
#define NUM_SQ_STATS ARRAY_SIZE(sq_stats_desc)
......
......@@ -1864,7 +1864,9 @@ struct mlx5_ifc_pcie_perf_cntrs_grp_data_layout_bits {
u8 crc_error_tlp[0x20];
u8 reserved_at_140[0x40];
u8 tx_overflow_buffer_pkt_high[0x20];
u8 tx_overflow_buffer_pkt_low[0x20];
u8 outbound_stalled_reads[0x20];
......@@ -7767,7 +7769,7 @@ struct mlx5_ifc_pcam_reg_bits {
struct mlx5_ifc_mcam_enhanced_features_bits {
u8 reserved_at_0[0x7b];
u8 pcie_outbound_stalled[0x1];
u8 reserved_at_7c[0x1];
u8 tx_overflow_buffer_pkt[0x1];
u8 mtpps_enh_out_per_adj[0x1];
u8 mtpps_fs[0x1];
u8 pcie_performance_group[0x1];
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册