Add simple weighted IPVS failover support to the Linux kernel. All
other scheduling modules implement some form of load balancing, while
this offers a simple failover solution. Connections are directed to
the appropriate server based solely on highest weight value and server
availability. Tested functionality with keepalived.
Signed-off-by: NKenny Mathis <kmathis@chokepoint.net>
Acked-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NSimon Horman <horms@verge.net.au>

Users are starting to test nf_tables with no x_tables support. Therefore,
masquerading needs to be indenpendent of it from Kconfig.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Now that we have masquerading support in nf_tables, the NAT chain can
be use with it, not only for SNAT/DNAT. So make this chain type
independent of it.

While at it, move it inside the scope of 'if NF_NAT_IPV*' to simplify
dependencies.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

To keep this consistent with other nft_*_attributes.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

 CONFIG_NF_NAT_MASQUERADE_IPV6=m
 # CONFIG_IP6_NF_TARGET_MASQUERADE is not set

results in:

net/ipv6/netfilter/nf_nat_masquerade_ipv6.c: In function ‘nf_nat_masquerade_ipv6’:
net/ipv6/netfilter/nf_nat_masquerade_ipv6.c:41:14: error: ‘struct nf_conn_nat’ has no member named ‘masq_index’
  nfct_nat(ct)->masq_index = out->ifindex;
              ^
net/ipv6/netfilter/nf_nat_masquerade_ipv6.c: In function ‘device_cmp’:
net/ipv6/netfilter/nf_nat_masquerade_ipv6.c:61:12: error: ‘const struct nf_conn_nat’ has no member named ‘masq_index’
  return nat->masq_index == (int)(long)ifindex;
            ^
net/ipv6/netfilter/nf_nat_masquerade_ipv6.c:62:1: warning: control
reaches end of non-void function [-Wreturn-type]
 }
 ^
make[3]: *** [net/ipv6/netfilter/nf_nat_masquerade_ipv6.o] Error 1

Fix this by using the new NF_NAT_MASQUERADE_IPV4 and _IPV6 symbols
in include/net/netfilter/nf_nat.h.
Reported-by: NJim Davis <jim.epost@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Since BPF JIT depends on the availability of module_alloc() and
module_free() helpers (HAVE_BPF_JIT and MODULES), we better build
that code only in case we have BPF_JIT in our config enabled, just
like with other JIT code. Fixes builds for arm/marzen_defconfig
and sh/rsk7269_defconfig.

====================
kernel/built-in.o: In function `bpf_jit_binary_alloc':
/home/cwang/linux/kernel/bpf/core.c:144: undefined reference to `module_alloc'
kernel/built-in.o: In function `bpf_jit_binary_free':
/home/cwang/linux/kernel/bpf/core.c:164: undefined reference to `module_free'
make: *** [vmlinux] Error 1
====================
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Fixes: 738cbe72 ("net: bpf: consolidate JIT binary allocator")
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
cxgb4: Allow FW size upto 1MB, support for S25FL032P flash and misc. fixes

This patch series adds support to allow FW size upto 1MB, support for S25FL032P
flash. Fix t4_flash_erase_sectors to throw an error, when erase sector aren't in
the flash and also warning message when adapters have flashes less than 2Mb.
Adds device id of new adapter and removes device id of debug adapter.

The patches series is created against 'net-next' tree.
And includes patches on cxgb4 driver and cxgb4vf driver.

We have included all the maintainers of respective drivers. Kindly review the
change and let us know in case of any review comments.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

cxgb4: Fix t4_flash_erase_sectors() to throw an error when requested to erase sectors which aren't in the FLASH

Based on original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for Spansion S25FL032P flash
Based on original work by Dimitris Michailidis
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes the following sparse warnings:
sparse: symbol 'tipc_update_nametbl' was not declared. Should it be static?
Also, the function is changed to return bool upon success, rather than a
potentially freed pointer.
Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Free resources before being disconnected from phy and calling core driver is
wrong and should not happen. It avoids a delay of 4-5s caused by the timeout of
phy_disconnect().
Signed-off-by: NRomain Perier <romain.perier@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
nf-next pull request

The following patchset contains Netfilter/IPVS updates for your
net-next tree. Regarding nf_tables, most updates focus on consolidating
the NAT infrastructure and adding support for masquerading. More
specifically, they are:

1) use __u8 instead of u_int8_t in arptables header, from
   Mike Frysinger.

2) Add support to match by skb->pkttype to the meta expression, from
   Ana Rey.

3) Add support to match by cpu to the meta expression, also from
   Ana Rey.

4) A smatch warning about IPSET_ATTR_MARKMASK validation, patch from
   Vytas Dauksa.

5) Fix netnet and netportnet hash types the range support for IPv4,
   from Sergey Popovich.

6) Fix missing-field-initializer warnings resolved, from Mark Rustad.

7) Dan Carperter reported possible integer overflows in ipset, from
   Jozsef Kadlecsick.

8) Filter out accounting objects in nfacct by type, so you can
   selectively reset quotas, from Alexey Perevalov.

9) Move specific NAT IPv4 functions to the core so x_tables and
   nf_tables can share the same NAT IPv4 engine.

10) Use the new NAT IPv4 functions from nft_chain_nat_ipv4.

11) Move specific NAT IPv6 functions to the core so x_tables and
    nf_tables can share the same NAT IPv4 engine.

12) Use the new NAT IPv6 functions from nft_chain_nat_ipv6.

13) Refactor code to add nft_delrule(), which can be reused in the
    enhancement of the NFT_MSG_DELTABLE to remove a table and its
    content, from Arturo Borrero.

14) Add a helper function to unregister chain hooks, from
    Arturo Borrero.

15) A cleanup to rename to nft_delrule_by_chain for consistency with
    the new nft_*() functions, also from Arturo.

16) Add support to match devgroup to the meta expression, from Ana Rey.

17) Reduce stack usage for IPVS socket option, from Julian Anastasov.

18) Remove unnecessary textsearch state initialization in xt_string,
    from Bojan Prtvar.

19) Add several helper functions to nf_tables, more work to prepare
    the enhancement of NFT_MSG_DELTABLE, again from Arturo Borrero.

20) Enhance NFT_MSG_DELTABLE to delete a table and its content, from
    Arturo Borrero.

21) Support NAT flags in the nat expression to indicate the flavour,
    eg. random fully, from Arturo.

22) Add missing audit code to ebtables when replacing tables, from
    Nicolas Dichtel.

23) Generalize the IPv4 masquerading code to allow its re-use from
    nf_tables, from Arturo.

24) Generalize the IPv6 masquerading code, also from Arturo.

25) Add the new masq expression to support IPv4/IPv6 masquerading
    from nf_tables, also from Arturo.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the more common pr_warn.

Other miscellanea:

o Coalesce formats
o Realign arguments
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the more common pr_warn.
Coalesce formats.
Realign arguments.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the more common pr_warn.
Realign arguments.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the more common pr_warn.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tom Herbert says:

====================
net: enable GRO for IPIP and SIT

This patch sets populates the IPIP and SIT offload structures with
gro_receive and gro_complete functions. This enables use of GRO
for these. Also, fixed a problem in IPv6 where we were not properly
initializing flush_id.

Peformance results are below. Note that these tests were done on bnx2x
which doesn't provide RX checksum offload of IPIP or SIT (i.e. does
not give CHEKCSUM_COMPLETE). Also, we don't get 4-tuple hash for RSS
only 2-tuple in this case so all the packets between two hosts are
winding up on the same queue. Net result is the interrupting CPU is
the bottleneck in GRO (checksumming every packet there).

Testing:

netperf TCP_STREAM between two hosts using bnx2x.

* Before fix

IPIP
  1 connection
    6.53% CPU utilization
    6544.71 Mbps
  20 connections
    13.79% CPU utilization
    9284.54 Mbps

SIT
  1 connection
    6.68% CPU utilization
    5653.36 Mbps
  20 connections
    18.88% CPU utilization
    9154.61 Mbps

* After fix

IPIP
  1 connection
    5.73% CPU utilization
    9279.53 Mbps
  20 connections
    7.14% CPU utilization
    7279.35 Mbps

SIT
  1 connection
    2.95% CPU utilization
    9143.36 Mbps
  20 connections
    7.09% CPU utilization
    6255.3 Mbps
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add ipv6_gro_receive and ipv6_gro_complete to sit_offload to
support GRO.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add inet_gro_receive and inet_gro_complete to ipip_offload to
support GRO.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In TCP gro we check flush_id which is derived from the IP identifier.
In IPv4 gro path the flush_id is set with the expectation that every
matched packet increments IP identifier. In IPv6, the flush_id is
never set and thus is uinitialized. What's worse is that in IPv6
over IPv4 encapsulation, the IP identifier is taken from the outer
header which is currently not incremented on every packet for Linux
stack, so GRO in this case never matches packets (identifier is
not increasing).

This patch clears flush_id for every time for a matched packet in
IPv6 gro_receive. We need to do this each time to overwrite the
setting that would be done in IPv4 gro_receive per the outer
header in IPv6 over Ipv4 encapsulation.
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the much more common pr_warn instead of pr_warning.

Other miscellanea:

o Typo fixes submiting/submitting
o Coalesce formats
o Realign arguments
o Add missing terminating '\n' to formats
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net/ipv4/udp_offload.c:339:5: warning: symbol 'udp4_gro_complete' was
not declared. Should it be static?
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Tom Herbert <therbert@google.com>
Fixes: 57c67ff4 ("udp: additional GRO support")
Acked-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net/core/net_namespace.c:227:18: warning: incorrect type in argument 1
(different address spaces)
net/core/net_namespace.c:227:18:    expected void const *<noident>
net/core/net_namespace.c:227:18:    got struct net_generic [noderef]
<asn:4>*gen

We can use rcu_access_pointer() here as read-side access to the pointer
was removed at least one grace period ago.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net/ipv6/udp_offload.c:159:5: warning: symbol 'udp6_gro_complete' was
not declared. Should it be static?
Signed-off-by: NEric Dumazet <edumazet@google.com>
Fixes: 57c67ff4 ("udp: additional GRO support")
Cc: Tom Herbert <therbert@google.com>
Acked-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove one sparse warning :
net/ipv4/ip_sockglue.c:328:22: warning: incorrect type in assignment (different address spaces)
net/ipv4/ip_sockglue.c:328:22:    expected struct ip_ra_chain [noderef] <asn:4>*next
net/ipv4/ip_sockglue.c:328:22:    got struct ip_ra_chain *[assigned] ra

And replace one rcu_assign_ptr() by RCU_INIT_POINTER() where applicable.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's not used anywhere, so just remove these.
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of looping in the code let's use kernel extension to dump small
buffers.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace mdelay with usleep_range to avoid busy loop.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Few packets have timestamping enabled. Exit sock_tx_timestamp quickly
in this common case.
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

not used anymore since ddecf0f4
(net_sched: sfq: add optional RED on top of SFQ).
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert the normal transmit completion path from dev_kfree_skb_any()
to dev_consume_skb_any() to help keep dropped packet profiling
meaningful.
Signed-off-by: NRick Jones <rick.jones2@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Nikolay Aleksandrov says:

====================
bonding: get rid of bond->lock

This patch-set removes the last users of bond->lock and converts the places
that needed it for sync to use curr_slave_lock or RCU as appropriate.
I've run this with lockdep and have stress-tested it via loading/unloading
and enslaving/releasing in parallel while outputting bond's proc, I didn't
see any issues. Please pay special attention to the procfs change, I've
done about an hour of stress-testing on it and have checked that the event
that causes the bonding to delete its proc entry (NETDEV_UNREGISTER) is
called before ndo_uninit() and the freeing of the dev so any readers will
sync with that. Also ran sparse checks and there were no splats.

v2: Add patch 0001/cxgb4 bond->lock removal, RTNL should be held in the
    notifier call, the other patches are the same. Also tested with
    allmodconfig to make sure there're no more users of bond->lock.
Changes from the RFC:
 use RCU in procfs instead of RTNL since RTNL might lead to a deadlock with
 unloading and also is much slower. The bond destruction syncs with proc
 via the proc locks. There's one new patch that converts primary_slave to
 use RCU as it was necessary to fix a longstanding bugs in sysfs and
 procfs and to make it easy to migrate bond's procfs to RCU. And of course
 rebased on top of net-next current.

This is the first patch-set in a series that should simplify the bond's
locking requirements and will make it easier to define the locking
conditions necessary for the various paths. The goal is to rely on RTNL
and rcu alone, an extra lock would be needed in a few special cases that
would be documented very well.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The usage of bond->lock in bond_main.c was completely unnecessary as it
didn't help to sync with anything, most of the spots already had RTNL.
Since there're no more users of bond->lock, remove it.
Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We're safe to remove the bond->lock use from the arp targets because
arp_rcv_probe no longer acquires bond->lock, only rcu_read_lock.
Also setting the primary slave is safe because noone uses the bond->lock
as a syncing mechanism for that anymore.
Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use RCU to protect against slave release, the proc show function will sync
with the bond destruction by the proc locks and the fact that the bond is
released after NETDEV_UNREGISTER which causes the bonding to remove the
proc entry.
Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is necessary mainly for two bonding call sites: procfs and
sysfs as it was dereferenced without any real protection.
Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>