Ulrich Drepper and Namhyung Kim reported that the libelf logic in
config/Makefile is duplicated in part.

Remove the duplication, and also remove the now unused FLAGS_LIBELF
variable.
Reported-by: NUlrich Drepper <drepper@gmail.com>
Reported-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Namhyung Kim reported these duplicate DPACKAGE definitions:

  test-libbfd:
       $(BUILD) -DPACKAGE='perf' -DPACKAGE=perf -lbfd -ldl

Fix all affected places and use Namhyung's suggestion that the
definition should look like a normal C string: -DPACKAGE='"perf"'.
Reported-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Arnaldo reported that 'make DEBUG=1' does not work anymore.

The reason is that 'Makefile' only passes it through to
'Makefile.perf' via the environment, but 'Makefile.perf'
checks that it's a command line option:

    ifeq ("$(origin DEBUG)", "command line")
      PERF_DEBUG = $(DEBUG)
    endif

So pass it through properly, and also clean up DEBUG parameter
handling while at it and fix a couple of annoyances:

 - DEBUG=0 used to be interpreted as 'debugging on'. Turn it
   into 'debugging off' instead.

 - Same was the case for 'DEBUG=' - turn that into debug-off
   as well.

 - Pass in just a clean, sanitized 'DEBUG' value and get rid of
   the intermediate, unnecessary PERF_DEBUG variable.
Reported-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Arnaldo reported that non-existent build directories were not
recognized  properly. The reason is readlink failure causing 'O'
to become empty.

Solve it by passing through the 'O' variable unmodified if
readlink fails.
Reported-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131009150023.GA10167@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add a function to find a symbol using an ip that might be on a different
map.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381747424-3557-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The objdump tool fails to annotate module symbols when looking at kcore.

Workaround this by extracting object code from kcore and putting it in a
temporary file for objdump to use instead.

The temporary file is created to look like kcore but contains only the
function being disassembled.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381320078-16497-3-git-send-email-adrian.hunter@intel.com
[ Renamed 'index' to 'idx' to avoid shadowing string.h's 'index' in Fedora 12,
  Replace local with variable length with malloc/free to fix build in Fedora 12 ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Before using kcore we need to check that modules are in memory at the
same addresses that they were when data was recorded.

This is done because, while we could remap symbols to different
addresses, the object code linkages would still be different which would
provide an erroneous view of the object code.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381320078-16497-2-git-send-email-adrian.hunter@intel.com
[ Rename basename to base_name to avoid shadowing libgen's basename in fedora 12 ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We fail build with NO_DEMANGLE with missing -lbfd externals error.
The reason is that we now use bfd code in srcline object:
  perf tools: Implement addr2line directly using libbfd

So we need to check/add -lbfd always now.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>

Fix for a memory leak on test_file() function in dso-data.c.
Signed-off-by: NFelipe Pena <felipensp@gmail.com>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1381370438-4209-1-git-send-email-felipensp@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

trace-event-parse.c:parse_proc_kallsyms()

    Old GCC (4.4.2) does not see through the code flow of get_srcline() and
gets confused about the status of 'file' and 'line':

    CC       /tmp/build/perf/util/srcline.o
  cc1: warnings being treated as errors
  util/srcline.c: In function ¿get_srcline¿:
  util/srcline.c:226: error: ¿file¿ may be used uninitialized in this function
  util/srcline.c:227: error: ¿line¿ may be used uninitialized in this function
  make[1]: *** [/tmp/build/perf/util/srcline.o] Error 1
  make: *** [install] Error 2
  make: Leaving directory `/home/acme/git/linux/tools/perf'
  [acme@fedora12 linux]$

Help out GCC by initializing 'file' and 'line'.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/n/tip-h8k7h49z3cndqgjdftkmm9f8@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When enabled dumps a summary of all syscalls by task with the usual
statistics -- min, max, average and relative stddev. For example,

make - 26341 :       3344   [ 17.4% ]      0.000 ms

                read :   52    0.000     4.802     0.644   30.08
               write :   20    0.004     0.036     0.010   21.72
                open :   24    0.003     0.046     0.014   23.68
               close :   64    0.002     0.055     0.008   22.53
                stat : 2714    0.002     0.222     0.004    4.47
               fstat :   18    0.001     0.041     0.006   46.26
                mmap :   30    0.003     0.009     0.006    5.71
            mprotect :    8    0.006     0.039     0.016   32.16
              munmap :   12    0.007     0.077     0.020   38.25
                 brk :   48    0.002     0.014     0.004   10.18
        rt_sigaction :   18    0.002     0.002     0.002    2.11
      rt_sigprocmask :   60    0.002     0.128     0.010   32.88
              access :    2    0.006     0.006     0.006    0.00
                pipe :   12    0.004     0.048     0.013   35.98
               vfork :   34    0.448     0.980     0.692    3.04
              execve :   20    0.000     0.387     0.046   56.66
               wait4 :   34    0.017  9923.287   593.221   68.45
               fcntl :    8    0.001     0.041     0.013   48.79
            getdents :   48    0.002     0.079     0.013   19.62
              getcwd :    2    0.005     0.005     0.005    0.00
               chdir :    2    0.070     0.070     0.070    0.00
           getrlimit :    2    0.045     0.045     0.045    0.00
          arch_prctl :    2    0.002     0.002     0.002    0.00
           setrlimit :    2    0.002     0.002     0.002    0.00
              openat :   94    0.003     0.005     0.003    2.11
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381289214-24885-3-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Similar to other findnew based methods if the requested object is not
found, add it to the list.

v2: followed format of other findnew methods per acme's request
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381289214-24885-2-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently, execution of 'perf trace' reports the following cryptic
message to the user:

$ perf trace
Couldn't read the raw_syscalls tracepoints information!

Typically this happens because the user does not have permissions to
read the debugfs filesystem. Also handle the case when the kernel was
not compiled with debugfs support or when it isn't mounted.

Now, the tool prints detailed error messages:

$ perf trace
Error:	Unable to find debugfs
Hint:	Was your kernel was compiled with debugfs support?
Hint:	Is the debugfs filesystem mounted?
Hint:	Try 'sudo mount -t debugfs nodev /sys/kernel/debug'

$ perf trace
Error:	No permissions to read /sys/kernel/debug//tracing/events/raw_syscalls
Hint:	Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/'
Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1380863851-14460-1-git-send-email-artagnon@gmail.com
[ Added ready to use commands to fix the issues as extra hints, use the
  current debugfs mount point when reporting permission error, use
  strerror_r instead of the deprecated sys_errlist, as reported by David Ahern ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

While at it, update the synopsis to show both forms.
Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/1380791716-10325-1-git-send-email-artagnon@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

'make install' used to show all the install lines, which is way too
verbose to be really informative to the user.

Implement summary output instead:

  comet:~/tip/tools/perf> make install
    BUILD:   Doing 'make -j12' parallel build
    SUBDIR   Documentation
    INSTALL  Documentation-man
    INSTALL  binaries
    INSTALL  libexec
    INSTALL  perf-archive
    INSTALL  perl-scripts
    INSTALL  python-scripts
    INSTALL  bash_completion-script
    INSTALL  tests

'make install V=1' will still show the old, detailed output.

Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1381312169-17354-5-git-send-email-mingo@kernel.org
[ Fixed conflict with libperf-gtk patches in acme/perf/core, cope with 'trace' alias ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Before:

  CC util/pmu.o
  CC util/parse-events.o
PERF_VERSION = 3.12.rc4.g1b30c
  CC util/parse-events-flex.o
  GEN perf-archive

After:

  CC util/pmu.o
  CC util/parse-events.o
  PERF_VERSION = 3.12.rc4.g1b30c
  CC util/parse-events-flex.o
  GEN perf-archive
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1381312169-17354-4-git-send-email-mingo@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The various build lines from libtraceevent and perf mix up during a
parallel build and produce unaligned output like:

    CC builtin-buildid-list.o
    CC builtin-buildid-cache.o
    CC builtin-list.o
  CC FPIC            trace-seq.o
    CC builtin-record.o
  CC FPIC            parse-filter.o
    CC builtin-report.o
    CC builtin-stat.o
  CC FPIC            parse-utils.o
  CC FPIC            kbuffer-parse.o
    CC builtin-timechart.o
    CC builtin-top.o
    CC builtin-script.o
  BUILD STATIC LIB   libtraceevent.a
    CC builtin-probe.o
    CC builtin-kmem.o
    CC builtin-lock.o

To solve this, harmonize all the build message alignments to be similar
to the kernel's kbuild output: prefixed by two spaces and 11-char wide.

After the patch the output looks pretty tidy, even if output lines get
mixed up:

  CC      builtin-annotate.o
  FLAGS:  * new build flags or cross compiler
  CC      builtin-bench.o
  AR      liblk.a
  CC      bench/sched-messaging.o
  CC FPIC event-parse.o
  CC      bench/sched-pipe.o
  CC FPIC trace-seq.o
  CC      bench/mem-memcpy.o
  CC      bench/mem-memset.o
  CC FPIC parse-filter.o
  CC      builtin-diff.o
  CC      builtin-evlist.o
  CC      builtin-help.o
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1381312169-17354-3-git-send-email-mingo@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

'make clean' used to show all the rm lines, which isn't really
informative in any way and spams the console.

Implement summary output:

  comet:~/tip/tools/perf> make clean
   CLEAN libtraceevent
   CLEAN liblk
   CLEAN config
   CLEAN core-objs
   CLEAN core-progs
   CLEAN core-gen
   CLEAN Documentation
   CLEAN python

'make clean V=1' will still show the old, detailed output.
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1381312169-17354-2-git-send-email-mingo@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix the duplicate util/util printout Arnaldo reported:

       $ make V=1 O=/tmp/build/perf -C tools/perf/ util/srcline.o
   ...
       # Redirected target util/srcline.o =>     /tmp/build/perf/util/util/srcline.o
Reported-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20131010054256.GA23716@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

 [root@zoo linux]# trace -e ioctl | grep -v "cmd: 0x" | head -10
      0.386 ( 0.001 ms): trace/1602 ioctl(fd: 1<pipe:[127057]>, cmd: TCGETS, arg: 0x7fff59fcb4d0          ) = -1 ENOTTY Inappropriate ioctl for device
   1459.368 ( 0.002 ms): inotify_reader/10352 ioctl(fd: 18<anon_inode:inotify>, cmd: FIONREAD, arg: 0x7fb835228bcc  ) = 0
   1463.586 ( 0.002 ms): inotify_reader/10352 ioctl(fd: 18<anon_inode:inotify>, cmd: FIONREAD, arg: 0x7fb835228bcc  ) = 0
   1463.611 ( 0.002 ms): inotify_reader/10352 ioctl(fd: 18<anon_inode:inotify>, cmd: FIONREAD, arg: 0x7fb835228bcc  ) = 0
   3740.526 ( 0.002 ms): awk/1612 ioctl(fd: 1<pipe:[128265]>, cmd: TCGETS, arg: 0x7fff4d166b90          ) = -1 ENOTTY Inappropriate ioctl for device
   3740.704 ( 0.001 ms): awk/1612 ioctl(fd: 3</proc/meminfo>, cmd: TCGETS, arg: 0x7fff4d1669a0          ) = -1 ENOTTY Inappropriate ioctl for device
   3742.550 ( 0.002 ms): ps/1614 ioctl(fd: 1<pipe:[128266]>, cmd: TIOCGWINSZ, arg: 0x7fff591762b0      ) = -1 ENOTTY Inappropriate ioctl for device
   3742.555 ( 0.003 ms): ps/1614 ioctl(fd: 2<socket:[19550]>, cmd: TIOCGWINSZ, arg: 0x7fff591762b0     ) = -1 ENOTTY Inappropriate ioctl for device
   3742.558 ( 0.002 ms): ps/1614 ioctl(cmd: TIOCGWINSZ, arg: 0x7fff591762b0                            ) = -1 ENOTTY Inappropriate ioctl for device
   3742.572 ( 0.002 ms): ps/1614 ioctl(fd: 1<pipe:[128266]>, cmd: TCGETS, arg: 0x7fff59176220          ) = -1 ENOTTY Inappropriate ioctl for device
 [root@zoo linux]#

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-afajwap3mr60dfl4qpdl1pxn@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Right now when an index passed to that method has no string associated
it'll print the index as a decimal number, prepare it so that we can use
it to print it in hex as well, for ioctls, for instance.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nsvy06sqj64qvnkmzvwxsx2v@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that the index passed doesn't have to start at zero, being
decremented from an offset specified when declaring the strarray before
being used as the real array index.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-k1ce6uqyt4qar9edrj3mevod@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Make a separate function to parse /proc/modules so that it can be
reused.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381221956-16699-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Allows commands to leverage intlist infrastructure for opaque
structures.

For example an upcoming perf-trace change will use this as a means of
tracking syscalls statistics by task.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1380395584-9025-6-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Use the new machine method that loops over threads to dump summary data.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1380395584-9025-3-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Loop over all threads within a machine - including threads moved to the
dead threads list -- and invoked a function.

This allows commands to run some specific function on each thread (eg.,
dump statistics) yet hides how the threads are maintained within the
machine.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1380395584-9025-2-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The record option is a convience alias to include the -e raw_syscalls:*
argument to perf-record. All other options are passed to perf-record's
handler. Resulting data file can be analyzed by perf-trace -i.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1380395584-9025-5-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Task comm's are getting lost when processing events from a file. The
problem is that the trace struct used by the live processing has its
host machine and the perf-session used for file based processing has its
host machine.  Fix by having both references point to the same machine.

Before:

     0.030 ( 0.001 ms): :27743/27743 brk( ...
     0.057 ( 0.004 ms): :27743/27743 mmap(len: 4096, prot: READ|WRITE, flags: ...
     0.075 ( 0.006 ms): :27743/27743 access(filename: 0x7f3809fbce00, mode: R ...
     0.091 ( 0.005 ms): :27743/27743 open(filename: 0x7f3809fba14c, flags: CLOEXEC ...
...

After:
     0.030 ( 0.001 ms): make/27743 brk( ...
     0.057 ( 0.004 ms): make/27743 mmap(len: 4096, prot: READ|WRITE, flags: ...
     0.075 ( 0.006 ms): make/27743 access(filename: 0x7f3809fbce00, mode: R ...
     0.091 ( 0.005 ms): make/27743 open(filename: 0x7f3809fba14c, flags: CLOEXEC ...
...
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1380395584-9025-4-git-send-email-dsahern@gmail.com
[ Moved creation of new host machine to a separate constructor: machine__new_host() ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Ingo pointed out that the task-clock counter should have the units
explicitly stated since it is not a counter.

Before:

perf stat -a -- sleep 1

 Performance counter stats for 'sleep 1':

      16186.874834 task-clock          #   16.154 CPUs utilized
...

After:

perf stat -a -- sleep 1

 Performance counter stats for 'system wide':

      16146.402138 task-clock (msec)   #   16.125 CPUs utilized
...
Reported-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1380400080-9211-4-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The "perf stat" command can do system wide counters or one or more cpus.
For these options do not require a workload to be specified.

v2: use perf_target__none per Namhyung's comment.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/52497F3C.9070908@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The "perf stat" tool displays the command run in its summary output
which is misleading when using a cpu list or system wide collection.

Before:

perf stat -a -- sleep 1

 Performance counter stats for 'sleep 1':

16152.670249 task-clock                #   16.132 CPUs utilized
         417 context-switches          #    0.002 M/sec
           7 cpu-migrations            #    0.030 K/sec
...

After:

perf stat -a -- sleep 1

 Performance counter stats for 'system wide':

16206.931120 task-clock                #   16.144 CPUs utilized
         395 context-switches          #    0.002 M/sec
           5 cpu-migrations            #    0.030 K/sec
...

or

perf stat -C1 -- sleep 1

 Performance counter stats for 'CPU(s) 1':

   1001.669257 task-clock                #    1.000 CPUs utilized
         4,264 context-switches          #    0.004 M/sec
             3 cpu-migrations            #    0.003 K/sec
...
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1380400080-9211-2-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The perf_evlist__mmap_read used 'union perf_event' as a placeholder for
event crossing the mmap boundary.

This is ok for sample shorter than ~PATH_MAX. However we could grow up
to the maximum sample size which is 16 bits max.

I hit this overflow issue when using 'perf top -G dwarf' which produces
sample with the size around 8192 bytes.  We could configure any valid
sample size here using: '-G dwarf,size'.

Using array with sample max size instead for the event placeholder. Also
adding another safe check for the dynamic size of the user stack.

TODO: The 'struct perf_mmap' is quite big now, maybe we could use some
lazy allocation for event_copy size.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1380721599-24285-1-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Patch adds more subtle handling of -C and -N parameters in
parse_{cpu,node}_setup_list() functions when there isn't enough NUMA
nodes or CPUs present.  Instead of assertion and terminating benchmark,
partial test is skipped with error message and perf will continue to the
next one.

Fixed problem can be easily reproduced on machine with only one NUMA
node:

 # Running numa/mem benchmark...

  # Running main, "perf bench numa mem -a"

...

 # Running RAM-bw-remote, "perf bench numa mem -p 1 -t 1 -P 1024 -C 0 -M 1 -s
perf: bench/numa.c:622: parse_setup_node_list: Assertion `!(bind_node_0 < 0 ||
		bind_node_0 >= g->p.nr_nodes)' failed.
Aborted
Signed-off-by: NPetr Holasek <pholasek@redhat.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Petr Benas <pbenas@redhat.com>
Link: http://lkml.kernel.org/r/1380821325-4017-1-git-send-email-pholasek@redhat.comSigned-off-by: NPetr Benas <pbenas@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The default output file produced by the 'perf timechart' tool is called
output.svg, add it to .gitignore.
Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1380789636-4512-1-git-send-email-artagnon@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When only the instructions event is requested:

$ perf stat -e instructions git s
M  builtin-stat.c

 Performance counter stats for 'git s':

       917,453,420 instructions              #    0.00  insns per cycle

       0.213002926 seconds time elapsed

The 0.00 insns per cycle comment in the output is totally bogus and
misleading. It happens because update_shadow_stats() doesn't touch
runtime_cycles_stats when only the instructions event is requested. So,
omit printing the bogus data altogether.
Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1380616604-4077-1-git-send-email-artagnon@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When only the cycles event is requested:

$ perf stat -e cycles dd if=/dev/zero of=/dev/null count=1000000
1000000+0 records in
1000000+0 records out
512000000 bytes (512 MB) copied, 0.26123 s, 2.0 GB/s

 Performance counter stats for 'dd if=/dev/zero of=/dev/null count=1000000':

       911,626,453 cycles                    #    0.000 GHz

       0.262113350 seconds time elapsed

The 0.000 GHz comment in the output is totally bogus and misleading. It
happens because update_shadow_stats() doesn't touch runtime_nsecs_stats;
it is only written when a requested counter matches a SW_TASK_CLOCK. In
our case, since we have only requested HW_CPU_CYCLES,
runtime_nsecs_stats is unavailable. So, omit printing the comment
altogether.
Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1380539585-23859-3-git-send-email-artagnon@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Moving start conditions to start of the flex file so it's clear what the
INITIAL condition rules are.

Plus adding default rule for INITIAL condition. This prevents default
space to be printed for events like:

$ ./perf stat -e "cycles        " kill 2>/dev/null
        $
^^^^^^^^
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1380299398-10839-1-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If we build perf with NO_LIBPYTHON=1 NO_LIBPERL=1 the '-ldl' is not
added to libs build fails if we have gtk2 code in, because it depends on
it.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1380221754-29865-1-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To avoid buffer overruns.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1379845338-29637-2-git-send-email-adrian.hunter@intel.com
[ Split from aa7fe3b0 ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Allow the measurement of thread versus process context switch
performance.

The default stays at 'process' based measurement, like lmbench's lat_ctx
benchmark.

Sample output:

 comet:~/tip/tools/perf> taskset 1 ./perf bench sched pipe
 # Running sched/pipe benchmark...
 # Executed 1000000 pipe operations between two processes

     Total time: 4.138 [sec]

       4.138729 usecs/op
         241620 ops/sec
 comet:~/tip/tools/perf> taskset 1 ./perf bench sched pipe --threaded
 # Running sched/pipe benchmark...
 # Executed 1000000 pipe operations between two threads

     Total time: 3.667 [sec]

       3.667667 usecs/op
         272652 ops/sec
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Link: http://lkml.kernel.org/r/20130917114256.GA31159@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>