- 28 4月, 2016 1 次提交
-
-
由 Maxime Ripard 提交于
Otherwise, building with DEBUG_FS enabled will trigger a build warning because we're using a structure that has not been declared. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
-
- 27 4月, 2016 1 次提交
-
-
由 Daniel Vetter 提交于
Need to move the free function around a bit, but otherwise mostly just removing code. Specifically we can nuke all the _locked variants since the weak idr reference is now protected by the idr_mutex, which we never hold anywhere expect in the lookup/reg/unreg functions. And those never call anything else. Another benefit of this is that this patch switches the weak reference logic from kref_put_mutex to kref_get_unless_zero. And the later is in general more flexible wrt accomodating multiple weak references protected by different locks, which might or might not come handy eventually. But one consequence of that switch is that we need to acquire the blob_lock from the free function for the list_del calls. That's a bit tricky to pull off, but works well if we pick the exact same scheme as is already used for framebuffers. Most important changes: - filp list is maintainer by create/destroy_blob ioctls directly (already the case, so we can just remove the redundant list_del from the free function). - filp close handler walks the filp-private list lockless - works because we know no one else can access it. I copied the same comment from the fb code over to explain this. - Otherwise we need to sufficiently restrict blob_lock critical sections to avoid all the unreference calls. Easy to do once the blob_lock only protects the list, and no longer the weak reference. Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Stone <daniels@collabora.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 22 4月, 2016 2 次提交
-
-
由 Dave Airlie 提交于
This is the initial code to add references to some mode objects. In the future we need to start reference counting connectors so firstly I want to reorganise the code so the framebuffer ref counting uses the same paths. This patch shouldn't change any functionality, just moves the kref. [airlied: move kerneldoc as well] Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Avoids drivers knowing where the kref is stored. [airlied: add kerneldoc] Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 20 4月, 2016 4 次提交
-
-
由 Ezequiel Garcia 提交于
Push the ifdef to the drm_edid.h and create a stub, for the DRM_LOAD_EDID_FIRMWARE=n case. This removes some clutter in the code, making it more readable. Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar> Reviewed-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1461087638-16959-1-git-send-email-ezequiel@vanguardiasur.com.ar
-
由 Alexey Brodkin 提交于
As a pair to already existing drm_connector_unregister_all() we're adding generic implementation of what is already done in some drivers. Once this helper is implemented we'll be ready to switch existing driver-specific implementations with the generic one. Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1461068693-11260-2-git-send-email-abrodkin@synopsys.com
-
由 Daniel Vetter 提交于
It's racy, creating mmap offsets is a slowpath, so better to remove it to avoid drivers doing broken things. The only user is i915, and it's ok there because everything (well almost) is protected by dev->struct_mutex in i915-gem. While at it add a note in the create_mmap_offset kerneldoc that drivers must release it again. And then I also noticed that drm_gem_object_release entirely lacks kerneldoc. Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459330852-27668-14-git-send-email-daniel.vetter@ffwll.ch
-
由 Lionel Landwerlin 提交于
When extracting the value at full precision (16 bits), no need to round the value. This was spotted by Jani when running sparse. Unfortunately this fix doesn't get rid of the warning. Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com> Reported-by: NJani Nikula <jani.nikula@intel.com> Cc: Daniel Stone <daniels@collabora.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: dri-devel@lists.freedesktop.org Fixes: 5488dc16 ("drm: introduce pipe color correction properties") Reviewed-by: NEmil Velikov <emil.velikov@collabora.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1458655833-19547-1-git-send-email-lionel.g.landwerlin@intel.com
-
- 15 4月, 2016 1 次提交
-
-
由 Jim Bride 提交于
In order to include monitor name information in debugfs output we needed to add a function that would extract the monitor name from the EDID, and that function needed to reside in the file where the rest of the EDID helper functions are implemented. v2: Refactor to have drm_edid_get_monitor_name() and drm_edid_to_eld() use a common helper function to extract the monitor name from the edid. [Jani] + rebase. v3: Minor changes suggested by Jani + rebase. v4: Few more minor changes suggested by Jani + rebase. cc: dri-devel@lists.freedesktop.org cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NJim Bride <jim.bride@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460654317-31288-1-git-send-email-jim.bride@linux.intel.com
-
- 14 4月, 2016 1 次提交
-
-
由 Robert Foss 提交于
The debug category comment mentions 4 categories, but more than 4 categories are listed. Let's change the wording to something a bit more generic. Signed-off-by: NRobert Foss <robert.foss@collabora.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460644456-9752-1-git-send-email-robert.foss@collabora.com
-
- 12 4月, 2016 1 次提交
-
-
由 Chris Wilson 提交于
I have instances where I want to use drm_malloc_ab() but with a custom gfp mask. And with those, where I want a temporary allocation, I want to try a high-order kmalloc() before using a vmalloc(). So refactor my usage into drm_malloc_gfp(). Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: dri-devel@lists.freedesktop.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Acked-by: NDave Airlie <airlied@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1460113874-17366-6-git-send-email-chris@chris-wilson.co.uk
-
- 05 4月, 2016 3 次提交
-
-
由 Yakir Yang 提交于
Rockchip have three clocks for dp controller, we leave pclk_edp to analogix_dp driver control, and keep the sclk_edp_24m and sclk_edp in platform driver. Acked-by: NMark Yao <mark.yao@rock-chips.com> Tested-by: NCaesar Wang <wxt@rock-chips.com> Tested-by: NDouglas Anderson <dianders@chromium.org> Tested-by: NHeiko Stuebner <heiko@sntech.de> Signed-off-by: NYakir Yang <ykk@rock-chips.com> Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
由 Yakir Yang 提交于
Split the dp core driver from exynos directory to bridge directory, and rename the core driver to analogix_dp_*, rename the platform code to exynos_dp. Beside the new analogix_dp driver would export six hooks. "analogix_dp_bind()" and "analogix_dp_unbind()" "analogix_dp_suspned()" and "analogix_dp_resume()" "analogix_dp_detect()" and "analogix_dp_get_modes()" The bind/unbind symbols is used for analogix platform driver to connect with analogix_dp core driver. And the detect/get_modes is used for analogix platform driver to init the connector. They reason why connector need register in helper driver is rockchip drm haven't implement the atomic API, but Exynos drm have implement it, so there would need two different connector helper functions, that's why we leave the connector register in helper driver. Acked-by: NInki Dae <inki.dae@samsung.com> Tested-by: NCaesar Wang <wxt@rock-chips.com> Tested-by: NDouglas Anderson <dianders@chromium.org> Tested-by: NHeiko Stuebner <heiko@sntech.de> Tested-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NYakir Yang <ykk@rock-chips.com> Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
-
由 Alex Deucher 提交于
Fixes ttm on platforms like PPC460 where the CPU is in 32-bit mode, but the physical addresses are >32 bits. Extracted from a patch by Hans Verkuil. Tested-by: NJulian Margetson <runaway@candw.ms> Acked-by: NThomas Hellstrom <thellstrom@vmware.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Julian Margetson <runaway@candw.ms> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 31 3月, 2016 2 次提交
-
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <robdclark@gmail.com> Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1458342904-23326-3-git-send-email-robdclark@gmail.com
-
由 Daniel Vetter 提交于
These type defines are officially part of the uapi, but ended up in the wrong headers somehow when we split them all. Cc: Emil Velikov <emil.l.velikov@gmail.com> Reviewed-by: NEmil Velikov <emil.l.velikov@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459347584-30566-3-git-send-email-daniel.vetter@ffwll.ch
-
- 30 3月, 2016 1 次提交
-
-
由 Daniel Vetter 提交于
It tries to do fancy things with excluding agp support if ttm is built-in, but agp isn't. Instead just express this depency like drm does and use CONFIG_AGP everywhere. Also use the neat Makefile magic to make the entire ttm_agp_backend file optional. v2: Use IS_ENABLED(CONFIG_AGP) as suggested by Ville v3: Review from Emil. v4: Actually get it right as spotted by 0-day. Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NEmil Velikov <emil.l.velikov@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1459337046-25882-1-git-send-email-daniel.vetter@ffwll.ch
-
- 29 3月, 2016 2 次提交
-
-
由 Alexey Brodkin 提交于
Current name is a bit misleading because what that helper function really does it calls drm_connector_unregister() for all connectors. This all has nothing to do with hotplugging so let's name things properly. And while at it remove potentially dangerous locking around drm_connector_unregister() in rcar_du_remove() as mentioned in kerneldoc for drm_connector_unregister_all(). Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: linux-renesas-soc@vger.kernel.org Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1458722577-20283-2-git-send-email-abrodkin@synopsys.com
-
由 Laurent Pinchart 提交于
Instead of forcing bridges to implement empty callbacks make them all optional. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456480266-7904-1-git-send-email-laurent.pinchart+renesas@ideasonboard.comAcked-by: NArchit Taneja <architt@codeaurora.org> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
-
- 08 3月, 2016 2 次提交
-
-
由 Lionel Landwerlin 提交于
Patch based on a previous series by Shashank Sharma. This introduces optional properties to enable color correction at the pipe level. It relies on 3 transformations applied to every pixels displayed. First a lookup into a degamma table, then a multiplication of the rgb components by a 3x3 matrix and finally another lookup into a gamma table. The following properties can be added to a pipe : - DEGAMMA_LUT : blob containing degamma LUT - DEGAMMA_LUT_SIZE : number of elements in DEGAMMA_LUT - CTM : transformation matrix applied after the degamma LUT - GAMMA_LUT : blob containing gamma LUT - GAMMA_LUT_SIZE : number of elements in GAMMA_LUT DEGAMMA_LUT_SIZE and GAMMA_LUT_SIZE are read only properties, set by the driver to tell userspace applications what sizes should be the lookup tables in DEGAMMA_LUT and GAMMA_LUT. A helper is also provided so legacy gamma correction is redirected through these new properties. v2: Register LUT size properties as range v3: Fix round in drm_color_lut_get_value() helper More docs on how degamma/gamma properties are used v4: Update contributors v5: Rename CTM_MATRIX property to CTM (Doh!) Add legacy gamma_set atomic helper Describe CTM/LUT acronyms in the kernel doc v6: Fix missing blob unref in drm_atomic_helper_crtc_reset Signed-off-by: NShashank Sharma <shashank.sharma@intel.com> Signed-off-by: NKumar, Kiran S <kiran.s.kumar@intel.com> Signed-off-by: NKausal Malladi <kausalmalladi@gmail.com> Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: NMatt Roper <matthew.d.roper@intel.com> Acked-by: NRob Bradford <robert.bradford@intel.com> [danvet: CrOS maintainers are also happy with the userspacde side: https://codereview.chromium.org/1182063002/ ] Reviewed-by: NDaniel Stone <daniels@collabora.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1456506302-640-4-git-send-email-lionel.g.landwerlin@intel.com
-
由 Maarten Lankhorst 提交于
Instead of failing with -EINVAL when conflicting encoders are found, the legacy set_config will disable other connectors when encoders conflict. With the previous commit this becomes a lot easier to implement. set_config only adds connectors to the state that are modified, and because of the previous commit that calls add_affected_connectors only on set->crtc it means any connector not part of the modeset can be stolen from. We disable the connector in that case, and possibly the crtc if required. Atomic modeset itself still doesn't allow encoder stealing, the results would be too unpredictable. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1456996662-8704-5-git-send-email-maarten.lankhorst@linux.intel.com
-
- 03 3月, 2016 5 次提交
-
-
由 Laurent Pinchart 提交于
Instead of forcing bridges to implement empty callbacks make them all optional. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NThierry Reding <treding@nvidia.com>
-
由 Archit Taneja 提交于
MIPI DSI devices are inherently aware of their host because they share a parent-child hierarchy in the device tree. Non-DSI drivers that create DSI device don't have this data. In order to get this information, they require to a phandle to the DSI host in the device tree. Maintain a list of all the DSI hosts that are currently registered. This list will be used to find the struct mipi_dsi_host corresponding to the device tree node passed to of_find_mipi_dsi_host_by_node(). Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NArchit Taneja <architt@codeaurora.org> Signed-off-by: NThierry Reding <treding@nvidia.com>
-
由 Archit Taneja 提交于
A driver calling mipi_dsi_device_register_full() might want to remove the device once it's done. It might also require it in an error handling path in case something went wrong. Create mipi_dsi_device_unregister() for this purpose and use it within mipi_dsi_remove_device_fn() as it does the same thing. Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NArchit Taneja <architt@codeaurora.org> Signed-off-by: NThierry Reding <treding@nvidia.com>
-
由 Archit Taneja 提交于
Add a device name field in struct mipi_dsi_device. This name is not the same as the device name (which is of the format "hostname.reg"). When the device is created via DT, this name is set to the modalias string. In the non-DT case, the driver creating the DSI device provides the name by populating a field in struct mipi_dsi_device_info. Matching for DT case would be as it was before. For the non-DT case, we compare the device and driver names. Other buses (like I2C/SPI) perform a non-DT match by comparing the device name and entries in the driver's id_table. Such a mechanism isn't used for the DSI bus. Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NArchit Taneja <architt@codeaurora.org> Signed-off-by: NThierry Reding <treding@nvidia.com>
-
由 Archit Taneja 提交于
Use mipi_dsi_device_register_full() for device creation. This takes in a struct mipi_dsi_device_info as a template to populate the DSI device information. The reason to introduce this is to have a way to create DSI devices not available via DT. Drivers that want to create a DSI device can populate a struct mipi_dsi_device_info and call this function. For DSI devices available via DT, of_mipi_dsi_device_add() is used as before, but this now calls mipi_dsi_device_register_full() internally. Signed-off-by: NArchit Taneja <architt@codeaurora.org> Signed-off-by: NThierry Reding <treding@nvidia.com>
-
- 01 3月, 2016 2 次提交
-
-
由 Andrzej Hajda 提交于
Platform data structures are not used for long time so the whole header file can be safely removed. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
struct exynos_drm_panel_info is not used anymore, except exynos_dp, which can integrate useful fields directly into its context. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 19 2月, 2016 1 次提交
-
-
由 Maarten Lankhorst 提交于
Because we record connector_mask using 1 << drm_connector_index now the connector_mask should stay the same even when other connectors are removed. This was not the case with MST, in that case when removing a connector all other connectors may change their index. This is fixed by waiting until the first get_connector_state to allocate connector_state, and force reallocation when state is too small. As a side effect connector arrays no longer have to be preallocated, and can be allocated on first use which means a less allocations in the page flip only path. Changes since v1: - Whitespace. (Ville) - Call ida_remove when destroying the connector. (Ville) - u32 alloc -> int. (Ville) Fixes: 14de6c44 ("drm/atomic: Remove drm_atomic_connectors_for_crtc.") Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NLyude <cpaul@redhat.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 16 2月, 2016 1 次提交
-
-
由 Subhransu S. Prusty 提交于
To fill the audio infoframe it is required to identify the connection type as DP or HDMI. This patch adds an API which parses ELD and returns the display type connected. Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com> Reviewed-by: NJani Nikula <jani.nikula@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Cc: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 12 2月, 2016 2 次提交
-
-
由 Rafael Antognolli 提交于
This module is heavily based on i2c-dev. Once loaded, it provides one dev node per DP AUX channel, named drm_dp_auxN, where N is an integer. It's possible to know which connector owns this aux channel by looking at the respective sysfs /sys/class/drm_aux_dev/drm_dp_auxN/connector, if the connector device pointer was correctly set in the aux helper struct. Two main operations are provided on the registers read and write. The address of the register to be read or written is given using lseek. The seek position is updated upon read or write. v2: - lseek is used to select the register to read/write - read/write are used instead of ioctl - no blocking_notifier is used, just a direct callback v3: - use drm_dp_aux_dev prefix for public functions - chardev is named drm_dp_auxN - read/write don't allocate a buffer anymore, and transfer up to 16 bytes a time - remove notifier list from the implementation - option on menuconfig is now a boolean - add inline stub functions to avoid breakage when this option is disabled v4: - fix build system changes - actually disable this module when not selected. v5: - Use kref to avoid device closing while still in use - Don't use list, use an idr for storing aux_dev - Remove "connector" attribute - set aux.dev to the connector drm_connector device, instead of drm_device v6: - Use atomic_t for usage count - Use a mutex instead of spinlock for idr lock - Destroy chardev immediately on unregister - other minor suggestions from Ville v7: - style fixes - error handling fixes v8: - more error handling fixes v9: - remove module_init and module_exit, and add drm_dp_aux_dev_init/exit to drm_kms_helper_init/exit. Signed-off-by: NRafael Antognolli <rafael.antognolli@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-3-git-send-email-rafael.antognolli@intel.com
-
由 Rafael Antognolli 提交于
The module_init and module_exit functions will start here, and call the subsequent init's and exit's. v10: - Keep __init on drm_fb_helper init function. - Move MODULE_* macros to the common file. Signed-off-by: NRafael Antognolli <rafael.antognolli@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-2-git-send-email-rafael.antognolli@intel.com
-
- 11 2月, 2016 1 次提交
-
-
由 Carlos Palminha 提交于
Avoids null crash when encoders don't implement mode_fixup. Signed-off-by: NCarlos Palminha <palminha@synopsys.com> [danvet: Also update kerneldoc.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com
-
- 10 2月, 2016 1 次提交
-
-
由 Philipp Zabel 提交于
This patch adds a helper to parse the encoder endpoint connected to the encoder's crtc and two helpers to return its id and port id. This can be used to determine input mux setting from endpoint or port ids. Suggested-by: NDaniel Kurtz <djkurtz@chromium.org> Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
- 09 2月, 2016 5 次提交
-
-
由 Ville Syrjälä 提交于
Add a few helpers to get the dimensions of the chroma plane(s). v2: Add kernel-doc (Daniel) v3: Fix kerneldoc "Returns:" style (Daniel) Uninline the functions and check for num_planes (Daniel) v4: Add the required EXPORT_SYMBOL()s Cc: dri-devel@lists.freedesktop.org Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1455031784-10941-1-git-send-email-ville.syrjala@linux.intel.com
-
由 Lukas Wunner 提交于
Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: Some dual graphics machines support muxing the DDC separately from the display, so make use of this functionality when reading the EDID on the inactive GPU. Also serialize drm_get_edid() with a mutex to avoid races on the DDC mux state. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-09: v3: Move vga_switcheroo calls to a wrapper around drm_get_edid() which drivers can call on muxed machines. This avoids other drivers having to go through the vga_switcheroo motions even though they are never used on a muxed platform (Thierry Reding, Daniel Vetter, Alex Deucher) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Tested-by: NPierre Moreau <pierre.morrow@free.fr> [MBP 5,3 2009 nvidia MCP79 + G96 pre-retina 15"] Tested-by: NWilliam Brown <william@blackhats.net.au> [MBP 8,2 2011 intel SNB + amd turks pre-retina 15"] Tested-by: NLukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: NLukas Wunner <lukas@wunner.de> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/b898d0da4c134f2642d0122479006863e1830723.1452525860.git.lukas@wunner.de
-
由 Maarten Lankhorst 提交于
This allows iteration over encoders without requiring connection_mutex. Changes since v1: - Add a set_best_encoder helper function and update encoder_mask inside it. Changes since v2: - Relax the WARN_ON(!crtc), with explanation. - Call set_best_encoder when connector is moved between crtc's. - Add some paranoia to steal_encoder to prevent accidentally setting best_encoder to NULL. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/56AA200A.6070501@linux.intel.com
-
由 Maarten Lankhorst 提交于
This is similar to the other drm_for_each_*_mask functions. Changes since v1: - Use for_each_if Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1452160762-30487-3-git-send-email-maarten.lankhorst@linux.intel.com
-
由 Maarten Lankhorst 提交于
This is useful for adding encoder_mask in crtc_state. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1452160762-30487-2-git-send-email-maarten.lankhorst@linux.intel.com
-
- 08 2月, 2016 1 次提交
-
-
由 Michał Winiarski 提交于
Used by production devices: Intel(R) Iris Graphics 540 (Skylake GT3e) Intel(R) Iris Graphics 550 (Skylake GT3e) v2: More ids v3: Less ids (GT1 got duplicated) Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: NMichał Winiarski <michal.winiarski@intel.com> Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454674902-26207-1-git-send-email-michal.winiarski@intel.com
-