提交 5fff80bb 编写于 作者: M Maarten Lankhorst 提交者: Dave Airlie

drm/atomic: Allow for holes in connector state, v2.

Because we record connector_mask using 1 << drm_connector_index now
the connector_mask should stay the same even when other connectors
are removed. This was not the case with MST, in that case when removing
a connector all other connectors may change their index.

This is fixed by waiting until the first get_connector_state to allocate
connector_state, and force reallocation when state is too small.

As a side effect connector arrays no longer have to be preallocated,
and can be allocated on first use which means a less allocations in
the page flip only path.

Changes since v1:
- Whitespace. (Ville)
- Call ida_remove when destroying the connector. (Ville)
- u32 alloc -> int. (Ville)

Fixes: 14de6c44 ("drm/atomic: Remove drm_atomic_connectors_for_crtc.")
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NLyude <cpaul@redhat.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>
上级 5441ea11
......@@ -65,8 +65,6 @@ drm_atomic_state_init(struct drm_device *dev, struct drm_atomic_state *state)
*/
state->allow_modeset = true;
state->num_connector = ACCESS_ONCE(dev->mode_config.num_connector);
state->crtcs = kcalloc(dev->mode_config.num_crtc,
sizeof(*state->crtcs), GFP_KERNEL);
if (!state->crtcs)
......@@ -83,16 +81,6 @@ drm_atomic_state_init(struct drm_device *dev, struct drm_atomic_state *state)
sizeof(*state->plane_states), GFP_KERNEL);
if (!state->plane_states)
goto fail;
state->connectors = kcalloc(state->num_connector,
sizeof(*state->connectors),
GFP_KERNEL);
if (!state->connectors)
goto fail;
state->connector_states = kcalloc(state->num_connector,
sizeof(*state->connector_states),
GFP_KERNEL);
if (!state->connector_states)
goto fail;
state->dev = dev;
......@@ -823,19 +811,27 @@ drm_atomic_get_connector_state(struct drm_atomic_state *state,
index = drm_connector_index(connector);
/*
* Construction of atomic state updates can race with a connector
* hot-add which might overflow. In this case flip the table and just
* restart the entire ioctl - no one is fast enough to livelock a cpu
* with physical hotplug events anyway.
*
* Note that we only grab the indexes once we have the right lock to
* prevent hotplug/unplugging of connectors. So removal is no problem,
* at most the array is a bit too large.
*/
if (index >= state->num_connector) {
DRM_DEBUG_ATOMIC("Hot-added connector would overflow state array, restarting\n");
return ERR_PTR(-EAGAIN);
struct drm_connector **c;
struct drm_connector_state **cs;
int alloc = max(index + 1, config->num_connector);
c = krealloc(state->connectors, alloc * sizeof(*state->connectors), GFP_KERNEL);
if (!c)
return ERR_PTR(-ENOMEM);
state->connectors = c;
memset(&state->connectors[state->num_connector], 0,
sizeof(*state->connectors) * (alloc - state->num_connector));
cs = krealloc(state->connector_states, alloc * sizeof(*state->connector_states), GFP_KERNEL);
if (!cs)
return ERR_PTR(-ENOMEM);
state->connector_states = cs;
memset(&state->connector_states[state->num_connector], 0,
sizeof(*state->connector_states) * (alloc - state->num_connector));
state->num_connector = alloc;
}
if (state->connector_states[index])
......
......@@ -1493,7 +1493,7 @@ void drm_atomic_helper_swap_state(struct drm_device *dev,
{
int i;
for (i = 0; i < dev->mode_config.num_connector; i++) {
for (i = 0; i < state->num_connector; i++) {
struct drm_connector *connector = state->connectors[i];
if (!connector)
......
......@@ -918,12 +918,19 @@ int drm_connector_init(struct drm_device *dev,
connector->base.properties = &connector->properties;
connector->dev = dev;
connector->funcs = funcs;
connector->connector_id = ida_simple_get(&config->connector_ida, 0, 0, GFP_KERNEL);
if (connector->connector_id < 0) {
ret = connector->connector_id;
goto out_put;
}
connector->connector_type = connector_type;
connector->connector_type_id =
ida_simple_get(connector_ida, 1, 0, GFP_KERNEL);
if (connector->connector_type_id < 0) {
ret = connector->connector_type_id;
goto out_put;
goto out_put_id;
}
connector->name =
kasprintf(GFP_KERNEL, "%s-%d",
......@@ -931,7 +938,7 @@ int drm_connector_init(struct drm_device *dev,
connector->connector_type_id);
if (!connector->name) {
ret = -ENOMEM;
goto out_put;
goto out_put_type_id;
}
INIT_LIST_HEAD(&connector->probed_modes);
......@@ -959,7 +966,12 @@ int drm_connector_init(struct drm_device *dev,
}
connector->debugfs_entry = NULL;
out_put_type_id:
if (ret)
ida_remove(connector_ida, connector->connector_type_id);
out_put_id:
if (ret)
ida_remove(&config->connector_ida, connector->connector_id);
out_put:
if (ret)
drm_mode_object_put(dev, &connector->base);
......@@ -996,6 +1008,9 @@ void drm_connector_cleanup(struct drm_connector *connector)
ida_remove(&drm_connector_enum_list[connector->connector_type].ida,
connector->connector_type_id);
ida_remove(&dev->mode_config.connector_ida,
connector->connector_id);
kfree(connector->display_info.bus_formats);
drm_mode_object_put(dev, &connector->base);
kfree(connector->name);
......@@ -1012,32 +1027,6 @@ void drm_connector_cleanup(struct drm_connector *connector)
}
EXPORT_SYMBOL(drm_connector_cleanup);
/**
* drm_connector_index - find the index of a registered connector
* @connector: connector to find index for
*
* Given a registered connector, return the index of that connector within a DRM
* device's list of connectors.
*/
unsigned int drm_connector_index(struct drm_connector *connector)
{
unsigned int index = 0;
struct drm_connector *tmp;
struct drm_mode_config *config = &connector->dev->mode_config;
WARN_ON(!drm_modeset_is_locked(&config->connection_mutex));
drm_for_each_connector(tmp, connector->dev) {
if (tmp == connector)
return index;
index++;
}
BUG();
}
EXPORT_SYMBOL(drm_connector_index);
/**
* drm_connector_register - register a connector
* @connector: the connector to register
......@@ -5789,6 +5778,7 @@ void drm_mode_config_init(struct drm_device *dev)
INIT_LIST_HEAD(&dev->mode_config.plane_list);
idr_init(&dev->mode_config.crtc_idr);
idr_init(&dev->mode_config.tile_idr);
ida_init(&dev->mode_config.connector_ida);
drm_modeset_lock_all(dev);
drm_mode_create_standard_properties(dev);
......@@ -5869,6 +5859,7 @@ void drm_mode_config_cleanup(struct drm_device *dev)
crtc->funcs->destroy(crtc);
}
ida_destroy(&dev->mode_config.connector_ida);
idr_destroy(&dev->mode_config.tile_idr);
idr_destroy(&dev->mode_config.crtc_idr);
drm_modeset_lock_fini(&dev->mode_config.connection_mutex);
......
......@@ -1166,6 +1166,7 @@ struct drm_connector {
struct drm_mode_object base;
char *name;
int connector_id;
int connector_type;
int connector_type_id;
bool interlace_allowed;
......@@ -2047,6 +2048,7 @@ struct drm_mode_config {
struct list_head fb_list;
int num_connector;
struct ida connector_ida;
struct list_head connector_list;
int num_encoder;
struct list_head encoder_list;
......@@ -2200,7 +2202,11 @@ int drm_connector_register(struct drm_connector *connector);
void drm_connector_unregister(struct drm_connector *connector);
extern void drm_connector_cleanup(struct drm_connector *connector);
extern unsigned int drm_connector_index(struct drm_connector *connector);
static inline unsigned drm_connector_index(struct drm_connector *connector)
{
return connector->connector_id;
}
/* helper to unplug all connectors from sysfs for device */
extern void drm_connector_unplug_all(struct drm_device *dev);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册