Remove unused symbol: enum max14577_irq_source.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

It is currently not possible to select the SA1100 or Vexpress
drivers in the MFD subsystem, because the menu for the entire
subsystem ends before these options are presented.

Move the main menu closing and the endif for HAS_IOMEM to the
end of the file so these are selectable again.

Cc: stable@vger.kernel.org
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Update the register patch based on latest evaluation of the device.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Added initial binding documentation for S2MPA01 MFD.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add support for S2MPA01 voltage and current regulator.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add the necessary entries required for S2MPA01 multi-function
device. While at it also convert whitespaces to tabs in core.h.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

When used 64bit compiler GCC warns as
drivers/mfd/sec-core.c:199:10: warning:
cast from pointer to integer of different size [-Wpointer-to-int-cast]
Signed-off-by: NPankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

During probe the sec-core driver allocates dummy I2C device for RTC with
i2c_new_dummy() but return value is not checked. In case of error
(i2c_new_device(): memory allocation failure or I2C address cannot be
used) this function returns NULL which is later used by
devm_regmap_init_i2c() or i2c_unregister_device().

If i2c_new_dummy() fails for RTC device, fail also the probe for main
MFD driver.

Cc: stable@vger.kernel.org
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add support for S2MPS14 PMIC device to the MFD sec-core driver.
The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two
clocks instead of three and a little different registers layout.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The S2MPS11 RTC has two alarms: alarm0 and alarm1 (corresponding
interrupts are named similarly). Use consistent names for interrupts to
limit possible errors.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This patch prepares for adding support for S2MPS14 RTC driver by
selecting different regmaps for S2MPS1X/S5M876X RTC devices.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add maximum register to the regmap used by rtc-s5m driver.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This is a driver for an A/D converter, which belongs into
drivers/iio/adc.
Signed-off-by: NSebastian Reichel <sre@debian.org>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add devicetree binding documentation for twl4030-madc
analog digital converter.
Signed-off-by: NSebastian Reichel <sre@debian.org>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Simplify reading and writing of 16 bit TWL registers in the
driver by using twl_i2c_read_u16 and twl_i2c_write_u16.
Signed-off-by: NSebastian Reichel <sre@debian.org>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Tested-by: NMarek Belisko <marek@goldelico.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add a simple twl_i2c_read/write_u16 wrapper over
the twl_i2c_read/write, which is similar to the
twl_i2c_read/write_u8 wrapper.
Signed-off-by: NSebastian Reichel <sre@debian.org>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Tested-by: NMarek Belisko <marek@goldelico.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Some style fixes in twl4030-madc driver.
Reported-by: NJonathan Cameron <jic23@kernel.org>
Reported-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NSebastian Reichel <sre@debian.org>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Tested-by: NMarek Belisko <marek@goldelico.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This converts twl4030-madc module to use the Industrial IO ADC
framework and adds device tree support.
Signed-off-by: NSebastian Reichel <sre@debian.org>
Tested-by: NMarek Belisko <marek@goldelico.com>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Update twl4030-madc driver to use managed resources.
Signed-off-by: NSebastian Reichel <sre@debian.org>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Tested-by: NMarek Belisko <marek@goldelico.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The omap-usb-tll driver needs one clock for each TLL channel.
Add this information to the DT binding document.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The omap-usb-host driver expects certained named clocks.
Add this information to the DT binding document.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Use a meaningful name for the reference clocks so that it indicates the
function.

Update the OMAP4+ USB Host node as well to be in sync with the changes.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Use the proper clock name 'usbhost_120m_fck' instead of the
alias 'ehci_logic_fck'

Get rid of the 'ehci_logic_fck' alias from the OMAP3 hwmod data
as well.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Be more strict and always fail on clk_get() error.
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Not all revisions have all the clocks so get the necessary clocks
based on hardware revision.

This should avoid un-necessary clk_get failure messages that were
observed earlier.

Also remove the dummy USB host clocks from the OMAP3 clock data.
These are no longer expected by the driver.

Acked-by: Mike Turquette <mturquette@linaro.org> [OMAP3 CLK data]
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Use devm_clk_get() instead of clk_get().
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Static analysis from cppcheck issued the following warning:

[drivers/mfd/omap-usb-tll.c:255]: (warning) Found calculation
  inside sizeof().

The current size calculation is not obvious and is easy to
miscomprehend, so re-work the size of the allocation based
on the size of the struct pointer and quantity to allocate.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Pull drm fixes from Dave Airlie:
 "Not a huge amount happening, some MAINTAINERS updates, radeon, vmwgfx
  and tegra fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/vmwgfx: avoid null pointer dereference at failure paths
  drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
  drm/vmwgfx: Remove some unused surface formats
  drm/radeon: enable speaker allocation setup on dce3.2
  drm/radeon: change audio enable logic
  drm/radeon: fix audio disable on dce6+
  drm/radeon: free uvd ring on unload
  drm/radeon: disable pll sharing for DP on DCE4.1
  drm/radeon: fix missing bo reservation
  drm/radeon: print the supported atpx function mask
  MAINTAINERS: update drm git tree entry
  MAINTAINERS: add entry for drm radeon driver
  drm/tegra: Add guard to avoid double disable/enable of RGB outputs
  gpu: host1x: do not check previously handled gathers
  drm/tegra: fix typo 'CONFIG_TEGRA_DRM_FBDEV'

Pull USB fixes from Greg KH:
 "Here are 2 USB patches for 3.14-rc5, one a new device id, and the
  other fixes a reported problem with threaded irqs and the USB EHCI
  driver"

* tag 'usb-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: ehci: fix deadlock when threadirqs option is used
  USB: ftdi_sio: add Cressi Leonardo PID

Merge tag 'driver-core-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull sysfs fix from Greg KH:
 "Here is a single sysfs fix for 3.14-rc5.  It fixes a reported problem
  with the namespace code in sysfs"

* tag 'driver-core-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  sysfs: fix namespace refcnt leak

Pull staging tree fixes from Greg KH:
 "Here are a few IIO fixes, and a new device id for a staging driver for
  3.14-rc5.  All have been in linux-next for a while, I did a final
  merge to get the IIO fixes into this tree, they were incorrectly in
  the char-misc tree for a few weeks, and I forgot to tell you to pull
  them from there.  This makes it a single pull request for you"

* tag 'staging-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: r8188eu: Add new device ID
  staging:iio:adc:MXS:LRADC: fix touchscreen statemachine
  iio:gyro: bug on L3GD20H gyroscope support
  iio: cm32181: Change cm32181 ambient light sensor driver
  iio: cm36651: Fix read/write integration time function.

more radeon fixes

* 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: enable speaker allocation setup on dce3.2
  drm/radeon: change audio enable logic
  drm/radeon: fix audio disable on dce6+
  drm/radeon: free uvd ring on unload
  drm/radeon: disable pll sharing for DP on DCE4.1
  drm/radeon: fix missing bo reservation
  drm/radeon: print the supported atpx function mask

These I forgot about before, but need to get into 3.14-final.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull perf fixes from Ingo Molnar:
 "Misc fixes, most of them on the tooling side"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Fix strict alias issue for find_first_bit
  perf tools: fix BFD detection on opensuse
  perf: Fix hotplug splat
  perf/x86: Fix event scheduling
  perf symbols: Destroy unused symsrcs
  perf annotate: Check availability of annotate when processing samples

Merge tag 'vmwgfx-fixes-3.14-2014-03-02' of git://people.freedesktop.org/~thomash/linux into drm-fixes

A couple of minor fixes.

Pull request of 2014-03-02

* tag 'vmwgfx-fixes-3.14-2014-03-02' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: avoid null pointer dereference at failure paths
  drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
  drm/vmwgfx: Remove some unused surface formats

vmw_takedown_otable_base() and vmw_mob_unbind() check for
potential vmw_fifo_reserve() failure and print error message,
but then immediately dereference NULL pointer.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>