Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 507792c9 编写于 作者: L Lee Jones
浏览文件
操作

Merge branch 'ib-mfd-regulator-3.15' into HEAD

上级 df8eddb3 ba3e31f8
隐藏空白更改
内联 并排
Showing with 1260 addition and 29 deletion
Documentation/devicetree/bindings/mfd/s2mpa01.txt 0 → 100644
浏览文件 @ 507792c9
* Samsung S2MPA01 Voltage and Current Regulator
The Samsung S2MPA01 is a multi-function device which includes high
efficiency buck converters including Dual-Phase buck converter, various LDOs,
and an RTC. It is interfaced to the host controller using an I2C interface.
Each sub-block is addressed by the host system using different I2C slave
addresses.
Required properties:
- compatible: Should be "samsung,s2mpa01-pmic".
- reg: Specifies the I2C slave address of the PMIC block. It should be 0x66.
Optional properties:
- interrupt-parent: Specifies the phandle of the interrupt controller to which
the interrupts from s2mpa01 are delivered to.
- interrupts: An interrupt specifier for the sole interrupt generated by the
device.
Optional nodes:
- regulators: The regulators of s2mpa01 that have to be instantiated should be
included in a sub-node named 'regulators'. Regulator nodes and constraints
included in this sub-node use the standard regulator bindings which are
documented elsewhere.
Properties for BUCK regulator nodes:
- regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500
(default), 25000, or 50000. May be 0 for disabling the ramp delay on
BUCK{1,2,3,4}.
In the absence of the regulator-ramp-delay property, the default ramp
delay will be used.
NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set
for a particular group of BUCKs. So provide same regulator-ramp-delay=<value>.
The following BUCKs share ramp settings:
* 1 and 6
* 2 and 4
* 8, 9, and 10
The following are the names of the regulators that the s2mpa01 PMIC block
supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
as per the datasheet of s2mpa01.
- LDOn
- valid values for n are 1 to 26
- Example: LDO1, LD02, LDO26
- BUCKn
- valid values for n are 1 to 10.
- Example: BUCK1, BUCK2, BUCK9
Example:
s2mpa01_pmic@66 {
compatible = "samsung,s2mpa01-pmic";
reg = <0x66>;
regulators {
ldo1_reg: LDO1 {
regulator-name = "VDD_ALIVE";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
ldo2_reg: LDO2 {
regulator-name = "VDDQ_MMC2";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
regulator-ramp-delay = <50000>;
};
};
};
drivers/mfd/sec-core.c
浏览文件 @ 507792c9
......@@ -26,7 +26,9 @@
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/irq.h>
#include <linux/mfd/samsung/rtc.h>
#include <linux/mfd/samsung/s2mpa01.h>
#include <linux/mfd/samsung/s2mps11.h>
#include <linux/mfd/samsung/s2mps14.h>
#include <linux/mfd/samsung/s5m8763.h>
#include <linux/mfd/samsung/s5m8767.h>
#include <linux/regmap.h>
......@@ -69,18 +71,53 @@ static const struct mfd_cell s2mps11_devs[] = {
}
};
static const struct mfd_cell s2mps14_devs[] = {
{
.name = "s2mps14-pmic",
}, {
.name = "s2mps14-rtc",
}, {
.name = "s2mps14-clk",
}
};
static const struct mfd_cell s2mpa01_devs[] = {
{
.name = "s2mpa01-pmic",
},
};
#ifdef CONFIG_OF
static struct of_device_id sec_dt_match[] = {
{ .compatible = "samsung,s5m8767-pmic",
.data = (void *)S5M8767X,
},
{ .compatible = "samsung,s2mps11-pmic",
}, {
.compatible = "samsung,s2mps11-pmic",
.data = (void *)S2MPS11X,
}, {
.compatible = "samsung,s2mps14-pmic",
.data = (void *)S2MPS14X,
}, {
.compatible = "samsung,s2mpa01-pmic",
.data = (void *)S2MPA01,
}, {
/* Sentinel */
},
{},
};
#endif
static bool s2mpa01_volatile(struct device *dev, unsigned int reg)
{
switch (reg) {
case S2MPA01_REG_INT1M:
case S2MPA01_REG_INT2M:
case S2MPA01_REG_INT3M:
return false;
default:
return true;
}
}
static bool s2mps11_volatile(struct device *dev, unsigned int reg)
{
switch (reg) {
......@@ -111,6 +148,15 @@ static const struct regmap_config sec_regmap_config = {
.val_bits = 8,
};
static const struct regmap_config s2mpa01_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = S2MPA01_REG_LDO_OVCB4,
.volatile_reg = s2mpa01_volatile,
.cache_type = REGCACHE_FLAT,
};
static const struct regmap_config s2mps11_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
......@@ -120,6 +166,15 @@ static const struct regmap_config s2mps11_regmap_config = {
.cache_type = REGCACHE_FLAT,
};
static const struct regmap_config s2mps14_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = S2MPS14_REG_LDODSCH3,
.volatile_reg = s2mps11_volatile,
.cache_type = REGCACHE_FLAT,
};
static const struct regmap_config s5m8763_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
......@@ -138,9 +193,18 @@ static const struct regmap_config s5m8767_regmap_config = {
.cache_type = REGCACHE_FLAT,
};
static const struct regmap_config sec_rtc_regmap_config = {
static const struct regmap_config s5m_rtc_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = SEC_RTC_REG_MAX,
};
static const struct regmap_config s2mps14_rtc_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = S2MPS_RTC_REG_MAX,
};
#ifdef CONFIG_OF
......@@ -180,24 +244,24 @@ static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata(
}
#endif
static inline int sec_i2c_get_driver_data(struct i2c_client *i2c,
static inline unsigned long sec_i2c_get_driver_data(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
#ifdef CONFIG_OF
if (i2c->dev.of_node) {
const struct of_device_id *match;
match = of_match_node(sec_dt_match, i2c->dev.of_node);
return (int)match->data;
return (unsigned long)match->data;
}
#endif
return (int)id->driver_data;
return id->driver_data;
}
static int sec_pmic_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct sec_platform_data *pdata = dev_get_platdata(&i2c->dev);
const struct regmap_config *regmap;
const struct regmap_config *regmap, *regmap_rtc;
struct sec_pmic_dev *sec_pmic;
int ret;
......@@ -229,17 +293,34 @@ static int sec_pmic_probe(struct i2c_client *i2c,
}
switch (sec_pmic->device_type) {
case S2MPA01:
regmap = &s2mpa01_regmap_config;
break;
case S2MPS11X:
regmap = &s2mps11_regmap_config;
/*
* The rtc-s5m driver does not support S2MPS11 and there
* is no mfd_cell for S2MPS11 RTC device.
* However we must pass something to devm_regmap_init_i2c()
* so use S5M-like regmap config even though it wouldn't work.
*/
regmap_rtc = &s5m_rtc_regmap_config;
break;
case S2MPS14X:
regmap = &s2mps14_regmap_config;
regmap_rtc = &s2mps14_rtc_regmap_config;
break;
case S5M8763X:
regmap = &s5m8763_regmap_config;
regmap_rtc = &s5m_rtc_regmap_config;
break;
case S5M8767X:
regmap = &s5m8767_regmap_config;
regmap_rtc = &s5m_rtc_regmap_config;
break;
default:
regmap = &sec_regmap_config;
regmap_rtc = &s5m_rtc_regmap_config;
break;
}
......@@ -252,10 +333,13 @@ static int sec_pmic_probe(struct i2c_client *i2c,
}
sec_pmic->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR);
if (!sec_pmic->rtc) {
dev_err(&i2c->dev, "Failed to allocate I2C for RTC\n");
return -ENODEV;
}
i2c_set_clientdata(sec_pmic->rtc, sec_pmic);
sec_pmic->regmap_rtc = devm_regmap_init_i2c(sec_pmic->rtc,
&sec_rtc_regmap_config);
sec_pmic->regmap_rtc = devm_regmap_init_i2c(sec_pmic->rtc, regmap_rtc);
if (IS_ERR(sec_pmic->regmap_rtc)) {
ret = PTR_ERR(sec_pmic->regmap_rtc);
dev_err(&i2c->dev, "Failed to allocate RTC register map: %d\n",
......@@ -283,10 +367,18 @@ static int sec_pmic_probe(struct i2c_client *i2c,
ret = mfd_add_devices(sec_pmic->dev, -1, s5m8767_devs,
ARRAY_SIZE(s5m8767_devs), NULL, 0, NULL);
break;
case S2MPA01:
ret = mfd_add_devices(sec_pmic->dev, -1, s2mpa01_devs,
ARRAY_SIZE(s2mpa01_devs), NULL, 0, NULL);
break;
case S2MPS11X:
ret = mfd_add_devices(sec_pmic->dev, -1, s2mps11_devs,
ARRAY_SIZE(s2mps11_devs), NULL, 0, NULL);
break;
case S2MPS14X:
ret = mfd_add_devices(sec_pmic->dev, -1, s2mps14_devs,
ARRAY_SIZE(s2mps14_devs), NULL, 0, NULL);
break;
default:
/* If this happens the probe function is problem */
BUG();
......
drivers/mfd/sec-irq.c
浏览文件 @ 507792c9
/*
* sec-irq.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd
* Copyright (c) 2011-2014 Samsung Electronics Co., Ltd
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify it
......@@ -19,6 +19,7 @@
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/irq.h>
#include <linux/mfd/samsung/s2mps11.h>
#include <linux/mfd/samsung/s2mps14.h>
#include <linux/mfd/samsung/s5m8763.h>
#include <linux/mfd/samsung/s5m8767.h>
......@@ -59,13 +60,13 @@ static const struct regmap_irq s2mps11_irqs[] = {
.reg_offset = 1,
.mask = S2MPS11_IRQ_RTC60S_MASK,
},
[S2MPS11_IRQ_RTCA1] = {
[S2MPS11_IRQ_RTCA0] = {
.reg_offset = 1,
.mask = S2MPS11_IRQ_RTCA1_MASK,
.mask = S2MPS11_IRQ_RTCA0_MASK,
},
[S2MPS11_IRQ_RTCA2] = {
[S2MPS11_IRQ_RTCA1] = {
.reg_offset = 1,
.mask = S2MPS11_IRQ_RTCA2_MASK,
.mask = S2MPS11_IRQ_RTCA1_MASK,
},
[S2MPS11_IRQ_SMPL] = {
.reg_offset = 1,
......@@ -89,6 +90,76 @@ static const struct regmap_irq s2mps11_irqs[] = {
},
};
static const struct regmap_irq s2mps14_irqs[] = {
[S2MPS14_IRQ_PWRONF] = {
.reg_offset = 0,
.mask = S2MPS11_IRQ_PWRONF_MASK,
},
[S2MPS14_IRQ_PWRONR] = {
.reg_offset = 0,
.mask = S2MPS11_IRQ_PWRONR_MASK,
},
[S2MPS14_IRQ_JIGONBF] = {
.reg_offset = 0,
.mask = S2MPS11_IRQ_JIGONBF_MASK,
},
[S2MPS14_IRQ_JIGONBR] = {
.reg_offset = 0,
.mask = S2MPS11_IRQ_JIGONBR_MASK,
},
[S2MPS14_IRQ_ACOKBF] = {
.reg_offset = 0,
.mask = S2MPS11_IRQ_ACOKBF_MASK,
},
[S2MPS14_IRQ_ACOKBR] = {
.reg_offset = 0,
.mask = S2MPS11_IRQ_ACOKBR_MASK,
},
[S2MPS14_IRQ_PWRON1S] = {
.reg_offset = 0,
.mask = S2MPS11_IRQ_PWRON1S_MASK,
},
[S2MPS14_IRQ_MRB] = {
.reg_offset = 0,
.mask = S2MPS11_IRQ_MRB_MASK,
},
[S2MPS14_IRQ_RTC60S] = {
.reg_offset = 1,
.mask = S2MPS11_IRQ_RTC60S_MASK,
},
[S2MPS14_IRQ_RTCA1] = {
.reg_offset = 1,
.mask = S2MPS11_IRQ_RTCA1_MASK,
},
[S2MPS14_IRQ_RTCA0] = {
.reg_offset = 1,
.mask = S2MPS11_IRQ_RTCA0_MASK,
},
[S2MPS14_IRQ_SMPL] = {
.reg_offset = 1,
.mask = S2MPS11_IRQ_SMPL_MASK,
},
[S2MPS14_IRQ_RTC1S] = {
.reg_offset = 1,
.mask = S2MPS11_IRQ_RTC1S_MASK,
},
[S2MPS14_IRQ_WTSR] = {
.reg_offset = 1,
.mask = S2MPS11_IRQ_WTSR_MASK,
},
[S2MPS14_IRQ_INT120C] = {
.reg_offset = 2,
.mask = S2MPS11_IRQ_INT120C_MASK,
},
[S2MPS14_IRQ_INT140C] = {
.reg_offset = 2,
.mask = S2MPS11_IRQ_INT140C_MASK,
},
[S2MPS14_IRQ_TSD] = {
.reg_offset = 2,
.mask = S2MPS14_IRQ_TSD_MASK,
},
};
static const struct regmap_irq s5m8767_irqs[] = {
[S5M8767_IRQ_PWRR] = {
......@@ -246,6 +317,16 @@ static const struct regmap_irq_chip s2mps11_irq_chip = {
.ack_base = S2MPS11_REG_INT1,
};
static const struct regmap_irq_chip s2mps14_irq_chip = {
.name = "s2mps14",
.irqs = s2mps14_irqs,
.num_irqs = ARRAY_SIZE(s2mps14_irqs),
.num_regs = 3,
.status_base = S2MPS14_REG_INT1,
.mask_base = S2MPS14_REG_INT1M,
.ack_base = S2MPS14_REG_INT1,
};
static const struct regmap_irq_chip s5m8767_irq_chip = {
.name = "s5m8767",
.irqs = s5m8767_irqs,
......@@ -297,6 +378,12 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
sec_pmic->irq_base, &s2mps11_irq_chip,
&sec_pmic->irq_data);
break;
case S2MPS14X:
ret = regmap_add_irq_chip(sec_pmic->regmap_pmic, sec_pmic->irq,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
sec_pmic->irq_base, &s2mps14_irq_chip,
&sec_pmic->irq_data);
break;
default:
dev_err(sec_pmic->dev, "Unknown device type %d\n",
sec_pmic->device_type);
......
drivers/regulator/Kconfig
浏览文件 @ 507792c9
......@@ -416,6 +416,13 @@ config REGULATOR_RC5T583
through regulator interface. The device supports multiple DCDC/LDO
outputs which can be controlled by i2c communication.
config REGULATOR_S2MPA01
tristate "Samsung S2MPA01 voltage regulator"
depends on MFD_SEC_CORE
help
This driver controls Samsung S2MPA01 voltage output regulator
via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
config REGULATOR_S2MPS11
tristate "Samsung S2MPS11 voltage regulator"
depends on MFD_SEC_CORE
......
drivers/regulator/Makefile
浏览文件 @ 507792c9
......@@ -57,6 +57,7 @@ obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o
obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
......
drivers/regulator/s2mpa01.c 0 → 100644
浏览文件 @ 507792c9
/*
* Copyright (c) 2013 Samsung Electronics Co., Ltd
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/bug.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/s2mpa01.h>
#define S2MPA01_REGULATOR_CNT ARRAY_SIZE(regulators)
struct s2mpa01_info {
int ramp_delay24;
int ramp_delay3;
int ramp_delay5;
int ramp_delay16;
int ramp_delay7;
int ramp_delay8910;
};
static int get_ramp_delay(int ramp_delay)
{
unsigned char cnt = 0;
ramp_delay /= 6250;
while (true) {
ramp_delay = ramp_delay >> 1;
if (ramp_delay == 0)
break;
cnt++;
}
if (cnt > 3)
cnt = 3;
return cnt;
}
static int s2mpa01_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
unsigned int old_selector,
unsigned int new_selector)
{
struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev);
unsigned int ramp_delay = 0;
int old_volt, new_volt;
switch (rdev->desc->id) {
case S2MPA01_BUCK2:
case S2MPA01_BUCK4:
ramp_delay = s2mpa01->ramp_delay24;
break;
case S2MPA01_BUCK3:
ramp_delay = s2mpa01->ramp_delay3;
break;
case S2MPA01_BUCK5:
ramp_delay = s2mpa01->ramp_delay5;
break;
case S2MPA01_BUCK1:
case S2MPA01_BUCK6:
ramp_delay = s2mpa01->ramp_delay16;
break;
case S2MPA01_BUCK7:
ramp_delay = s2mpa01->ramp_delay7;
break;
case S2MPA01_BUCK8:
case S2MPA01_BUCK9:
case S2MPA01_BUCK10:
ramp_delay = s2mpa01->ramp_delay8910;
break;
}
if (ramp_delay == 0)
ramp_delay = rdev->desc->ramp_delay;
old_volt = rdev->desc->min_uV + (rdev->desc->uV_step * old_selector);
new_volt = rdev->desc->min_uV + (rdev->desc->uV_step * new_selector);
return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
}
static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
struct s2mpa01_info *s2mpa01 = rdev_get_drvdata(rdev);
unsigned int ramp_val, ramp_shift, ramp_reg = S2MPA01_REG_RAMP2;
unsigned int ramp_enable = 1, enable_shift = 0;
int ret;
switch (rdev->desc->id) {
case S2MPA01_BUCK1:
enable_shift = S2MPA01_BUCK1_RAMP_EN_SHIFT;
if (!ramp_delay) {
ramp_enable = 0;
break;
}
if (ramp_delay > s2mpa01->ramp_delay16)
s2mpa01->ramp_delay16 = ramp_delay;
else
ramp_delay = s2mpa01->ramp_delay16;
ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT;
ramp_reg = S2MPA01_REG_RAMP1;
break;
case S2MPA01_BUCK2:
enable_shift = S2MPA01_BUCK2_RAMP_EN_SHIFT;
if (!ramp_delay) {
ramp_enable = 0;
break;
}
if (ramp_delay > s2mpa01->ramp_delay24)
s2mpa01->ramp_delay24 = ramp_delay;
else
ramp_delay = s2mpa01->ramp_delay24;
ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT;
ramp_reg = S2MPA01_REG_RAMP1;
break;
case S2MPA01_BUCK3:
enable_shift = S2MPA01_BUCK3_RAMP_EN_SHIFT;
if (!ramp_delay) {
ramp_enable = 0;
break;
}
s2mpa01->ramp_delay3 = ramp_delay;
ramp_shift = S2MPA01_BUCK3_RAMP_SHIFT;
ramp_reg = S2MPA01_REG_RAMP1;
break;
case S2MPA01_BUCK4:
enable_shift = S2MPA01_BUCK4_RAMP_EN_SHIFT;
if (!ramp_delay) {
ramp_enable = 0;
break;
}
if (ramp_delay > s2mpa01->ramp_delay24)
s2mpa01->ramp_delay24 = ramp_delay;
else
ramp_delay = s2mpa01->ramp_delay24;
ramp_shift = S2MPA01_BUCK24_RAMP_SHIFT;
ramp_reg = S2MPA01_REG_RAMP1;
break;
case S2MPA01_BUCK5:
s2mpa01->ramp_delay5 = ramp_delay;
ramp_shift = S2MPA01_BUCK5_RAMP_SHIFT;
break;
case S2MPA01_BUCK6:
if (ramp_delay > s2mpa01->ramp_delay16)
s2mpa01->ramp_delay16 = ramp_delay;
else
ramp_delay = s2mpa01->ramp_delay16;
ramp_shift = S2MPA01_BUCK16_RAMP_SHIFT;
break;
case S2MPA01_BUCK7:
s2mpa01->ramp_delay7 = ramp_delay;
ramp_shift = S2MPA01_BUCK7_RAMP_SHIFT;
break;
case S2MPA01_BUCK8:
case S2MPA01_BUCK9:
case S2MPA01_BUCK10:
if (ramp_delay > s2mpa01->ramp_delay8910)
s2mpa01->ramp_delay8910 = ramp_delay;
else
ramp_delay = s2mpa01->ramp_delay8910;
ramp_shift = S2MPA01_BUCK8910_RAMP_SHIFT;
break;
default:
return 0;
}
if (!ramp_enable)
goto ramp_disable;
if (enable_shift) {
ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
1 << enable_shift, 1 << enable_shift);
if (ret) {
dev_err(&rdev->dev, "failed to enable ramp rate\n");
return ret;
}
}
ramp_val = get_ramp_delay(ramp_delay);
return regmap_update_bits(rdev->regmap, ramp_reg, 0x3 << ramp_shift,
ramp_val << ramp_shift);
ramp_disable:
return regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
1 << enable_shift, 0);
}
static struct regulator_ops s2mpa01_ldo_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
};
static struct regulator_ops s2mpa01_buck_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = s2mpa01_regulator_set_voltage_time_sel,
.set_ramp_delay = s2mpa01_set_ramp_delay,
};
#define regulator_desc_ldo1(num) { \
.name = "LDO"#num, \
.id = S2MPA01_LDO##num, \
.ops = &s2mpa01_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPA01_LDO_MIN, \
.uV_step = S2MPA01_LDO_STEP1, \
.n_voltages = S2MPA01_LDO_N_VOLTAGES, \
.vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \
.vsel_mask = S2MPA01_LDO_VSEL_MASK, \
.enable_reg = S2MPA01_REG_L1CTRL + num - 1, \
.enable_mask = S2MPA01_ENABLE_MASK \
}
#define regulator_desc_ldo2(num) { \
.name = "LDO"#num, \
.id = S2MPA01_LDO##num, \
.ops = &s2mpa01_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPA01_LDO_MIN, \
.uV_step = S2MPA01_LDO_STEP2, \
.n_voltages = S2MPA01_LDO_N_VOLTAGES, \
.vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \
.vsel_mask = S2MPA01_LDO_VSEL_MASK, \
.enable_reg = S2MPA01_REG_L1CTRL + num - 1, \
.enable_mask = S2MPA01_ENABLE_MASK \
}
#define regulator_desc_buck1_4(num) { \
.name = "BUCK"#num, \
.id = S2MPA01_BUCK##num, \
.ops = &s2mpa01_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPA01_BUCK_MIN1, \
.uV_step = S2MPA01_BUCK_STEP1, \
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPA01_RAMP_DELAY, \
.vsel_reg = S2MPA01_REG_B1CTRL2 + (num - 1) * 2, \
.vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
.enable_reg = S2MPA01_REG_B1CTRL1 + (num - 1) * 2, \
.enable_mask = S2MPA01_ENABLE_MASK \
}
#define regulator_desc_buck5 { \
.name = "BUCK5", \
.id = S2MPA01_BUCK5, \
.ops = &s2mpa01_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPA01_BUCK_MIN2, \
.uV_step = S2MPA01_BUCK_STEP1, \
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPA01_RAMP_DELAY, \
.vsel_reg = S2MPA01_REG_B5CTRL2, \
.vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
.enable_reg = S2MPA01_REG_B5CTRL1, \
.enable_mask = S2MPA01_ENABLE_MASK \
}
#define regulator_desc_buck6_7(num) { \
.name = "BUCK"#num, \
.id = S2MPA01_BUCK##num, \
.ops = &s2mpa01_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPA01_BUCK_MIN1, \
.uV_step = S2MPA01_BUCK_STEP1, \
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPA01_RAMP_DELAY, \
.vsel_reg = S2MPA01_REG_B6CTRL2 + (num - 6) * 2, \
.vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
.enable_reg = S2MPA01_REG_B6CTRL1 + (num - 6) * 2, \
.enable_mask = S2MPA01_ENABLE_MASK \
}
#define regulator_desc_buck8 { \
.name = "BUCK8", \
.id = S2MPA01_BUCK8, \
.ops = &s2mpa01_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPA01_BUCK_MIN2, \
.uV_step = S2MPA01_BUCK_STEP2, \
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPA01_RAMP_DELAY, \
.vsel_reg = S2MPA01_REG_B8CTRL2, \
.vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
.enable_reg = S2MPA01_REG_B8CTRL1, \
.enable_mask = S2MPA01_ENABLE_MASK \
}
#define regulator_desc_buck9 { \
.name = "BUCK9", \
.id = S2MPA01_BUCK9, \
.ops = &s2mpa01_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPA01_BUCK_MIN4, \
.uV_step = S2MPA01_BUCK_STEP2, \
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPA01_RAMP_DELAY, \
.vsel_reg = S2MPA01_REG_B9CTRL2, \
.vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
.enable_reg = S2MPA01_REG_B9CTRL1, \
.enable_mask = S2MPA01_ENABLE_MASK \
}
#define regulator_desc_buck10 { \
.name = "BUCK10", \
.id = S2MPA01_BUCK10, \
.ops = &s2mpa01_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPA01_BUCK_MIN3, \
.uV_step = S2MPA01_BUCK_STEP2, \
.n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPA01_RAMP_DELAY, \
.vsel_reg = S2MPA01_REG_B10CTRL2, \
.vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
.enable_reg = S2MPA01_REG_B10CTRL1, \
.enable_mask = S2MPA01_ENABLE_MASK \
}
static struct regulator_desc regulators[] = {
regulator_desc_ldo2(1),
regulator_desc_ldo1(2),
regulator_desc_ldo1(3),
regulator_desc_ldo1(4),
regulator_desc_ldo1(5),
regulator_desc_ldo2(6),
regulator_desc_ldo1(7),
regulator_desc_ldo1(8),
regulator_desc_ldo1(9),
regulator_desc_ldo1(10),
regulator_desc_ldo2(11),
regulator_desc_ldo1(12),
regulator_desc_ldo1(13),
regulator_desc_ldo1(14),
regulator_desc_ldo1(15),
regulator_desc_ldo1(16),
regulator_desc_ldo1(17),
regulator_desc_ldo1(18),
regulator_desc_ldo1(19),
regulator_desc_ldo1(20),
regulator_desc_ldo1(21),
regulator_desc_ldo2(22),
regulator_desc_ldo2(23),
regulator_desc_ldo1(24),
regulator_desc_ldo1(25),
regulator_desc_ldo1(26),
regulator_desc_buck1_4(1),
regulator_desc_buck1_4(2),
regulator_desc_buck1_4(3),
regulator_desc_buck1_4(4),
regulator_desc_buck5,
regulator_desc_buck6_7(6),
regulator_desc_buck6_7(7),
regulator_desc_buck8,
regulator_desc_buck9,
regulator_desc_buck10,
};
static int s2mpa01_pmic_probe(struct platform_device *pdev)
{
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX];
struct device_node *reg_np = NULL;
struct regulator_config config = { };
struct s2mpa01_info *s2mpa01;
int i;
s2mpa01 = devm_kzalloc(&pdev->dev, sizeof(*s2mpa01), GFP_KERNEL);
if (!s2mpa01)
return -ENOMEM;
for (i = 0; i < S2MPA01_REGULATOR_CNT; i++)
rdata[i].name = regulators[i].name;
if (iodev->dev->of_node) {
reg_np = of_get_child_by_name(iodev->dev->of_node,
"regulators");
if (!reg_np) {
dev_err(&pdev->dev,
"could not find regulators sub-node\n");
return -EINVAL;
}
of_regulator_match(&pdev->dev, reg_np, rdata,
S2MPA01_REGULATOR_MAX);
of_node_put(reg_np);
}
platform_set_drvdata(pdev, s2mpa01);
config.dev = &pdev->dev;
config.regmap = iodev->regmap_pmic;
config.driver_data = s2mpa01;
for (i = 0; i < S2MPA01_REGULATOR_MAX; i++) {
struct regulator_dev *rdev;
if (pdata)
config.init_data = pdata->regulators[i].initdata;
else
config.init_data = rdata[i].init_data;
if (reg_np)
config.of_node = rdata[i].of_node;
rdev = devm_regulator_register(&pdev->dev,
&regulators[i], &config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "regulator init failed for %d\n",
i);
return PTR_ERR(rdev);
}
}
return 0;
}
static const struct platform_device_id s2mpa01_pmic_id[] = {
{ "s2mpa01-pmic", 0},
{ },
};
MODULE_DEVICE_TABLE(platform, s2mpa01_pmic_id);
static struct platform_driver s2mpa01_pmic_driver = {
.driver = {
.name = "s2mpa01-pmic",
.owner = THIS_MODULE,
},
.probe = s2mpa01_pmic_probe,
.id_table = s2mpa01_pmic_id,
};
module_platform_driver(s2mpa01_pmic_driver);
/* Module information */
MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
MODULE_AUTHOR("Sachin Kamat <sachin.kamat@samsung.com>");
MODULE_DESCRIPTION("SAMSUNG S2MPA01 Regulator Driver");
MODULE_LICENSE("GPL");
include/linux/mfd/samsung/core.h
浏览文件 @ 507792c9
......@@ -18,7 +18,9 @@ enum sec_device_type {
S5M8751X,
S5M8763X,
S5M8767X,
S2MPA01,
S2MPS11X,
S2MPS14X,
};
/**
......@@ -50,7 +52,7 @@ struct sec_pmic_dev {
struct regmap_irq_chip_data *irq_data;
int ono;
int type;
unsigned long type;
bool wakeup;
bool wtsr_smpl;
};
......@@ -92,7 +94,7 @@ struct sec_platform_data {
int buck3_default_idx;
int buck4_default_idx;
int buck_ramp_delay;
int buck_ramp_delay;
int buck2_ramp_delay;
int buck34_ramp_delay;
......@@ -100,10 +102,15 @@ struct sec_platform_data {
int buck16_ramp_delay;
int buck7810_ramp_delay;
int buck9_ramp_delay;
bool buck2_ramp_enable;
bool buck3_ramp_enable;
bool buck4_ramp_enable;
int buck24_ramp_delay;
int buck3_ramp_delay;
int buck7_ramp_delay;
int buck8910_ramp_delay;
bool buck1_ramp_enable;
bool buck2_ramp_enable;
bool buck3_ramp_enable;
bool buck4_ramp_enable;
bool buck6_ramp_enable;
int buck2_init;
......
include/linux/mfd/samsung/irq.h
浏览文件 @ 507792c9
......@@ -13,6 +13,56 @@
#ifndef __LINUX_MFD_SEC_IRQ_H
#define __LINUX_MFD_SEC_IRQ_H
enum s2mpa01_irq {
S2MPA01_IRQ_PWRONF,
S2MPA01_IRQ_PWRONR,
S2MPA01_IRQ_JIGONBF,
S2MPA01_IRQ_JIGONBR,
S2MPA01_IRQ_ACOKBF,
S2MPA01_IRQ_ACOKBR,
S2MPA01_IRQ_PWRON1S,
S2MPA01_IRQ_MRB,
S2MPA01_IRQ_RTC60S,
S2MPA01_IRQ_RTCA1,
S2MPA01_IRQ_RTCA0,
S2MPA01_IRQ_SMPL,
S2MPA01_IRQ_RTC1S,
S2MPA01_IRQ_WTSR,
S2MPA01_IRQ_INT120C,
S2MPA01_IRQ_INT140C,
S2MPA01_IRQ_LDO3_TSD,
S2MPA01_IRQ_B16_TSD,
S2MPA01_IRQ_B24_TSD,
S2MPA01_IRQ_B35_TSD,
S2MPA01_IRQ_NR,
};
#define S2MPA01_IRQ_PWRONF_MASK (1 << 0)
#define S2MPA01_IRQ_PWRONR_MASK (1 << 1)
#define S2MPA01_IRQ_JIGONBF_MASK (1 << 2)
#define S2MPA01_IRQ_JIGONBR_MASK (1 << 3)
#define S2MPA01_IRQ_ACOKBF_MASK (1 << 4)
#define S2MPA01_IRQ_ACOKBR_MASK (1 << 5)
#define S2MPA01_IRQ_PWRON1S_MASK (1 << 6)
#define S2MPA01_IRQ_MRB_MASK (1 << 7)
#define S2MPA01_IRQ_RTC60S_MASK (1 << 0)
#define S2MPA01_IRQ_RTCA1_MASK (1 << 1)
#define S2MPA01_IRQ_RTCA0_MASK (1 << 2)
#define S2MPA01_IRQ_SMPL_MASK (1 << 3)
#define S2MPA01_IRQ_RTC1S_MASK (1 << 4)
#define S2MPA01_IRQ_WTSR_MASK (1 << 5)
#define S2MPA01_IRQ_INT120C_MASK (1 << 0)
#define S2MPA01_IRQ_INT140C_MASK (1 << 1)
#define S2MPA01_IRQ_LDO3_TSD_MASK (1 << 2)
#define S2MPA01_IRQ_B16_TSD_MASK (1 << 3)
#define S2MPA01_IRQ_B24_TSD_MASK (1 << 4)
#define S2MPA01_IRQ_B35_TSD_MASK (1 << 5)
enum s2mps11_irq {
S2MPS11_IRQ_PWRONF,
S2MPS11_IRQ_PWRONR,
......@@ -24,8 +74,8 @@ enum s2mps11_irq {
S2MPS11_IRQ_MRB,
S2MPS11_IRQ_RTC60S,
S2MPS11_IRQ_RTCA0,
S2MPS11_IRQ_RTCA1,
S2MPS11_IRQ_RTCA2,
S2MPS11_IRQ_SMPL,
S2MPS11_IRQ_RTC1S,
S2MPS11_IRQ_WTSR,
......@@ -47,7 +97,7 @@ enum s2mps11_irq {
#define S2MPS11_IRQ_RTC60S_MASK (1 << 0)
#define S2MPS11_IRQ_RTCA1_MASK (1 << 1)
#define S2MPS11_IRQ_RTCA2_MASK (1 << 2)
#define S2MPS11_IRQ_RTCA0_MASK (1 << 2)
#define S2MPS11_IRQ_SMPL_MASK (1 << 3)
#define S2MPS11_IRQ_RTC1S_MASK (1 << 4)
#define S2MPS11_IRQ_WTSR_MASK (1 << 5)
......@@ -55,6 +105,33 @@ enum s2mps11_irq {
#define S2MPS11_IRQ_INT120C_MASK (1 << 0)
#define S2MPS11_IRQ_INT140C_MASK (1 << 1)
enum s2mps14_irq {
S2MPS14_IRQ_PWRONF,
S2MPS14_IRQ_PWRONR,
S2MPS14_IRQ_JIGONBF,
S2MPS14_IRQ_JIGONBR,
S2MPS14_IRQ_ACOKBF,
S2MPS14_IRQ_ACOKBR,
S2MPS14_IRQ_PWRON1S,
S2MPS14_IRQ_MRB,
S2MPS14_IRQ_RTC60S,
S2MPS14_IRQ_RTCA1,
S2MPS14_IRQ_RTCA0,
S2MPS14_IRQ_SMPL,
S2MPS14_IRQ_RTC1S,
S2MPS14_IRQ_WTSR,
S2MPS14_IRQ_INT120C,
S2MPS14_IRQ_INT140C,
S2MPS14_IRQ_TSD,
S2MPS14_IRQ_NR,
};
/* Masks for interrupts are the same as in s2mps11 */
#define S2MPS14_IRQ_TSD_MASK (1 << 2)
enum s5m8767_irq {
S5M8767_IRQ_PWRR,
S5M8767_IRQ_PWRF,
......
include/linux/mfd/samsung/rtc.h
浏览文件 @ 507792c9
/* rtc.h
/* rtc.h
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd
* Copyright (c) 2011-2014 Samsung Electronics Co., Ltd
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
......@@ -43,6 +48,39 @@ enum sec_rtc_reg {
SEC_RTC_STATUS,
SEC_WTSR_SMPL_CNTL,
SEC_RTC_UDR_CON,
SEC_RTC_REG_MAX,
};
enum s2mps_rtc_reg {
S2MPS_RTC_CTRL,
S2MPS_WTSR_SMPL_CNTL,
S2MPS_RTC_UDR_CON,
S2MPS_RSVD,
S2MPS_RTC_SEC,
S2MPS_RTC_MIN,
S2MPS_RTC_HOUR,
S2MPS_RTC_WEEKDAY,
S2MPS_RTC_DATE,
S2MPS_RTC_MONTH,
S2MPS_RTC_YEAR,
S2MPS_ALARM0_SEC,
S2MPS_ALARM0_MIN,
S2MPS_ALARM0_HOUR,
S2MPS_ALARM0_WEEKDAY,
S2MPS_ALARM0_DATE,
S2MPS_ALARM0_MONTH,
S2MPS_ALARM0_YEAR,
S2MPS_ALARM1_SEC,
S2MPS_ALARM1_MIN,
S2MPS_ALARM1_HOUR,
S2MPS_ALARM1_WEEKDAY,
S2MPS_ALARM1_DATE,
S2MPS_ALARM1_MONTH,
S2MPS_ALARM1_YEAR,
S2MPS_OFFSRC,
S2MPS_RTC_REG_MAX,
};
#define RTC_I2C_ADDR (0x0C >> 1)
......@@ -54,6 +92,9 @@ enum sec_rtc_reg {
#define ALARM1_STATUS (1 << 2)
#define UPDATE_AD (1 << 0)
#define S2MPS_ALARM0_STATUS (1 << 2)
#define S2MPS_ALARM1_STATUS (1 << 1)
/* RTC Control Register */
#define BCD_EN_SHIFT 0
#define BCD_EN_MASK (1 << BCD_EN_SHIFT)
......@@ -62,6 +103,10 @@ enum sec_rtc_reg {
/* RTC Update Register1 */
#define RTC_UDR_SHIFT 0
#define RTC_UDR_MASK (1 << RTC_UDR_SHIFT)
#define S2MPS_RTC_WUDR_SHIFT 4
#define S2MPS_RTC_WUDR_MASK (1 << S2MPS_RTC_WUDR_SHIFT)
#define S2MPS_RTC_RUDR_SHIFT 0
#define S2MPS_RTC_RUDR_MASK (1 << S2MPS_RTC_RUDR_SHIFT)
#define RTC_TCON_SHIFT 1
#define RTC_TCON_MASK (1 << RTC_TCON_SHIFT)
#define RTC_TIME_EN_SHIFT 3
......
include/linux/mfd/samsung/s2mpa01.h 0 → 100644
浏览文件 @ 507792c9
/*
* Copyright (c) 2013 Samsung Electronics Co., Ltd
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __LINUX_MFD_S2MPA01_H
#define __LINUX_MFD_S2MPA01_H
/* S2MPA01 registers */
enum s2mpa01_reg {
S2MPA01_REG_ID,
S2MPA01_REG_INT1,
S2MPA01_REG_INT2,
S2MPA01_REG_INT3,
S2MPA01_REG_INT1M,
S2MPA01_REG_INT2M,
S2MPA01_REG_INT3M,
S2MPA01_REG_ST1,
S2MPA01_REG_ST2,
S2MPA01_REG_PWRONSRC,
S2MPA01_REG_OFFSRC,
S2MPA01_REG_RTC_BUF,
S2MPA01_REG_CTRL1,
S2MPA01_REG_ETC_TEST,
S2MPA01_REG_RSVD1,
S2MPA01_REG_BU_CHG,
S2MPA01_REG_RAMP1,
S2MPA01_REG_RAMP2,
S2MPA01_REG_LDO_DSCH1,
S2MPA01_REG_LDO_DSCH2,
S2MPA01_REG_LDO_DSCH3,
S2MPA01_REG_LDO_DSCH4,
S2MPA01_REG_OTP_ADRL,
S2MPA01_REG_OTP_ADRH,
S2MPA01_REG_OTP_DATA,
S2MPA01_REG_MON1SEL,
S2MPA01_REG_MON2SEL,
S2MPA01_REG_LEE,
S2MPA01_REG_RSVD2,
S2MPA01_REG_RSVD3,
S2MPA01_REG_RSVD4,
S2MPA01_REG_RSVD5,
S2MPA01_REG_RSVD6,
S2MPA01_REG_TOP_RSVD,
S2MPA01_REG_DVS_SEL,
S2MPA01_REG_DVS_PTR,
S2MPA01_REG_DVS_DATA,
S2MPA01_REG_RSVD_NO,
S2MPA01_REG_UVLO,
S2MPA01_REG_LEE_NO,
S2MPA01_REG_B1CTRL1,
S2MPA01_REG_B1CTRL2,
S2MPA01_REG_B2CTRL1,
S2MPA01_REG_B2CTRL2,
S2MPA01_REG_B3CTRL1,
S2MPA01_REG_B3CTRL2,
S2MPA01_REG_B4CTRL1,
S2MPA01_REG_B4CTRL2,
S2MPA01_REG_B5CTRL1,
S2MPA01_REG_B5CTRL2,
S2MPA01_REG_B5CTRL3,
S2MPA01_REG_B5CTRL4,
S2MPA01_REG_B5CTRL5,
S2MPA01_REG_B5CTRL6,
S2MPA01_REG_B6CTRL1,
S2MPA01_REG_B6CTRL2,
S2MPA01_REG_B7CTRL1,
S2MPA01_REG_B7CTRL2,
S2MPA01_REG_B8CTRL1,
S2MPA01_REG_B8CTRL2,
S2MPA01_REG_B9CTRL1,
S2MPA01_REG_B9CTRL2,
S2MPA01_REG_B10CTRL1,
S2MPA01_REG_B10CTRL2,
S2MPA01_REG_L1CTRL,
S2MPA01_REG_L2CTRL,
S2MPA01_REG_L3CTRL,
S2MPA01_REG_L4CTRL,
S2MPA01_REG_L5CTRL,
S2MPA01_REG_L6CTRL,
S2MPA01_REG_L7CTRL,
S2MPA01_REG_L8CTRL,
S2MPA01_REG_L9CTRL,
S2MPA01_REG_L10CTRL,
S2MPA01_REG_L11CTRL,
S2MPA01_REG_L12CTRL,
S2MPA01_REG_L13CTRL,
S2MPA01_REG_L14CTRL,
S2MPA01_REG_L15CTRL,
S2MPA01_REG_L16CTRL,
S2MPA01_REG_L17CTRL,
S2MPA01_REG_L18CTRL,
S2MPA01_REG_L19CTRL,
S2MPA01_REG_L20CTRL,
S2MPA01_REG_L21CTRL,
S2MPA01_REG_L22CTRL,
S2MPA01_REG_L23CTRL,
S2MPA01_REG_L24CTRL,
S2MPA01_REG_L25CTRL,
S2MPA01_REG_L26CTRL,
S2MPA01_REG_LDO_OVCB1,
S2MPA01_REG_LDO_OVCB2,
S2MPA01_REG_LDO_OVCB3,
S2MPA01_REG_LDO_OVCB4,
};
/* S2MPA01 regulator ids */
enum s2mpa01_regulators {
S2MPA01_LDO1,
S2MPA01_LDO2,
S2MPA01_LDO3,
S2MPA01_LDO4,
S2MPA01_LDO5,
S2MPA01_LDO6,
S2MPA01_LDO7,
S2MPA01_LDO8,
S2MPA01_LDO9,
S2MPA01_LDO10,
S2MPA01_LDO11,
S2MPA01_LDO12,
S2MPA01_LDO13,
S2MPA01_LDO14,
S2MPA01_LDO15,
S2MPA01_LDO16,
S2MPA01_LDO17,
S2MPA01_LDO18,
S2MPA01_LDO19,
S2MPA01_LDO20,
S2MPA01_LDO21,
S2MPA01_LDO22,
S2MPA01_LDO23,
S2MPA01_LDO24,
S2MPA01_LDO25,
S2MPA01_LDO26,
S2MPA01_BUCK1,
S2MPA01_BUCK2,
S2MPA01_BUCK3,
S2MPA01_BUCK4,
S2MPA01_BUCK5,
S2MPA01_BUCK6,
S2MPA01_BUCK7,
S2MPA01_BUCK8,
S2MPA01_BUCK9,
S2MPA01_BUCK10,
S2MPA01_REGULATOR_MAX,
};
#define S2MPA01_BUCK_MIN1 600000
#define S2MPA01_BUCK_MIN2 800000
#define S2MPA01_BUCK_MIN3 1000000
#define S2MPA01_BUCK_MIN4 1500000
#define S2MPA01_LDO_MIN 800000
#define S2MPA01_BUCK_STEP1 6250
#define S2MPA01_BUCK_STEP2 12500
#define S2MPA01_LDO_STEP1 50000
#define S2MPA01_LDO_STEP2 25000
#define S2MPA01_LDO_VSEL_MASK 0x3F
#define S2MPA01_BUCK_VSEL_MASK 0xFF
#define S2MPA01_ENABLE_MASK (0x03 << S2MPA01_ENABLE_SHIFT)
#define S2MPA01_ENABLE_SHIFT 0x06
#define S2MPA01_LDO_N_VOLTAGES (S2MPA01_LDO_VSEL_MASK + 1)
#define S2MPA01_BUCK_N_VOLTAGES (S2MPA01_BUCK_VSEL_MASK + 1)
#define S2MPA01_RAMP_DELAY 12500 /* uV/us */
#define S2MPA01_BUCK16_RAMP_SHIFT 4
#define S2MPA01_BUCK24_RAMP_SHIFT 6
#define S2MPA01_BUCK3_RAMP_SHIFT 4
#define S2MPA01_BUCK5_RAMP_SHIFT 6
#define S2MPA01_BUCK7_RAMP_SHIFT 2
#define S2MPA01_BUCK8910_RAMP_SHIFT 0
#define S2MPA01_BUCK1_RAMP_EN_SHIFT 3
#define S2MPA01_BUCK2_RAMP_EN_SHIFT 2
#define S2MPA01_BUCK3_RAMP_EN_SHIFT 1
#define S2MPA01_BUCK4_RAMP_EN_SHIFT 0
#define S2MPA01_PMIC_EN_SHIFT 6
#endif /*__LINUX_MFD_S2MPA01_H */
include/linux/mfd/samsung/s2mps14.h 0 → 100644
浏览文件 @ 507792c9
/*
* s2mps14.h
*
* Copyright (c) 2014 Samsung Electronics Co., Ltd
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __LINUX_MFD_S2MPS14_H
#define __LINUX_MFD_S2MPS14_H
/* S2MPS14 registers */
enum s2mps14_reg {
S2MPS14_REG_ID,
S2MPS14_REG_INT1,
S2MPS14_REG_INT2,
S2MPS14_REG_INT3,
S2MPS14_REG_INT1M,
S2MPS14_REG_INT2M,
S2MPS14_REG_INT3M,
S2MPS14_REG_ST1,
S2MPS14_REG_ST2,
S2MPS14_REG_PWRONSRC,
S2MPS14_REG_OFFSRC,
S2MPS14_REG_BU_CHG,
S2MPS14_REG_RTCCTRL,
S2MPS14_REG_CTRL1,
S2MPS14_REG_CTRL2,
S2MPS14_REG_RSVD1,
S2MPS14_REG_RSVD2,
S2MPS14_REG_RSVD3,
S2MPS14_REG_RSVD4,
S2MPS14_REG_RSVD5,
S2MPS14_REG_RSVD6,
S2MPS14_REG_CTRL3,
S2MPS14_REG_RSVD7,
S2MPS14_REG_RSVD8,
S2MPS14_REG_WRSTBI,
S2MPS14_REG_B1CTRL1,
S2MPS14_REG_B1CTRL2,
S2MPS14_REG_B2CTRL1,
S2MPS14_REG_B2CTRL2,
S2MPS14_REG_B3CTRL1,
S2MPS14_REG_B3CTRL2,
S2MPS14_REG_B4CTRL1,
S2MPS14_REG_B4CTRL2,
S2MPS14_REG_B5CTRL1,
S2MPS14_REG_B5CTRL2,
S2MPS14_REG_L1CTRL,
S2MPS14_REG_L2CTRL,
S2MPS14_REG_L3CTRL,
S2MPS14_REG_L4CTRL,
S2MPS14_REG_L5CTRL,
S2MPS14_REG_L6CTRL,
S2MPS14_REG_L7CTRL,
S2MPS14_REG_L8CTRL,
S2MPS14_REG_L9CTRL,
S2MPS14_REG_L10CTRL,
S2MPS14_REG_L11CTRL,
S2MPS14_REG_L12CTRL,
S2MPS14_REG_L13CTRL,
S2MPS14_REG_L14CTRL,
S2MPS14_REG_L15CTRL,
S2MPS14_REG_L16CTRL,
S2MPS14_REG_L17CTRL,
S2MPS14_REG_L18CTRL,
S2MPS14_REG_L19CTRL,
S2MPS14_REG_L20CTRL,
S2MPS14_REG_L21CTRL,
S2MPS14_REG_L22CTRL,
S2MPS14_REG_L23CTRL,
S2MPS14_REG_L24CTRL,
S2MPS14_REG_L25CTRL,
S2MPS14_REG_LDODSCH1,
S2MPS14_REG_LDODSCH2,
S2MPS14_REG_LDODSCH3,
};
/* S2MPS14 regulator ids */
enum s2mps14_regulators {
S2MPS14_LDO1,
S2MPS14_LDO2,
S2MPS14_LDO3,
S2MPS14_LDO4,
S2MPS14_LDO5,
S2MPS14_LDO6,
S2MPS14_LDO7,
S2MPS14_LDO8,
S2MPS14_LDO9,
S2MPS14_LDO10,
S2MPS14_LDO11,
S2MPS14_LDO12,
S2MPS14_LDO13,
S2MPS14_LDO14,
S2MPS14_LDO15,
S2MPS14_LDO16,
S2MPS14_LDO17,
S2MPS14_LDO18,
S2MPS14_LDO19,
S2MPS14_LDO20,
S2MPS14_LDO21,
S2MPS14_LDO22,
S2MPS14_LDO23,
S2MPS14_LDO24,
S2MPS14_LDO25,
S2MPS14_BUCK1,
S2MPS14_BUCK2,
S2MPS14_BUCK3,
S2MPS14_BUCK4,
S2MPS14_BUCK5,
S2MPS14_REGULATOR_MAX,
};
/* Regulator constraints for BUCKx */
#define S2MPS14_BUCK1235_MIN_600MV 600000
#define S2MPS14_BUCK4_MIN_1400MV 1400000
#define S2MPS14_BUCK1235_STEP_6_25MV 6250
#define S2MPS14_BUCK4_STEP_12_5MV 12500
#define S2MPS14_BUCK1235_START_SEL 0x20
#define S2MPS14_BUCK4_START_SEL 0x40
/*
* Default ramp delay in uv/us. Datasheet says that ramp delay can be
* controlled however it does not specify which register is used for that.
* Let's assume that default value will be set.
*/
#define S2MPS14_BUCK_RAMP_DELAY 12500
/* Regulator constraints for different types of LDOx */
#define S2MPS14_LDO_MIN_800MV 800000
#define S2MPS14_LDO_MIN_1800MV 1800000
#define S2MPS14_LDO_STEP_12_5MV 12500
#define S2MPS14_LDO_STEP_25MV 25000
#define S2MPS14_LDO_VSEL_MASK 0x3F
#define S2MPS14_BUCK_VSEL_MASK 0xFF
#define S2MPS14_ENABLE_MASK (0x03 << S2MPS14_ENABLE_SHIFT)
#define S2MPS14_ENABLE_SHIFT 6
#define S2MPS14_LDO_N_VOLTAGES (S2MPS14_LDO_VSEL_MASK + 1)
#define S2MPS14_BUCK_N_VOLTAGES (S2MPS14_BUCK_VSEL_MASK + 1)
#endif /* __LINUX_MFD_S2MPS14_H */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或