Here is a second try at a patch I posted earlier, which also implements
suggestions Steve made:

Before this patch, GFS2 would keep searching through all the rgrps
until it found one that had a chunk of free blocks big enough to
satisfy the size hint, which is based on the file write size,
regardless of whether the chunk was big enough to perform the write.
However, when doing big writes there may not be a large enough
chunk of free blocks in any rgrp, due to file system fragmentation.
The largest chunk may be big enough to satisfy the write request,
but it may not meet the ideal reservation size from the "size hint".
The writes would slow to a crawl because every write would search
every rgrp, then finally give up and default to a single-block write.
In my case, performance would drop from 425MB/s to 18KB/s, or 24000
times slower.

This patch basically makes it so that if we can't find a contiguous
chunk of blocks big enough to satisfy the sizehint, we'll use the
largest chunk of blocks we found that will still contain the write.
It does so by keeping track of the largest run of blocks within the
rgrp.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Pull kvm bugfixes from Marcelo Tosatti.

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: nVMX: Unconditionally uninit the MMU on nested vmexit
  KVM: x86: Fix APIC map calculation after re-enabling

Merge patches from Andrew Morton:
 "Ten fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  epoll: do not take the nested ep->mtx on EPOLL_CTL_DEL
  sh: add EXPORT_SYMBOL(min_low_pfn) and EXPORT_SYMBOL(max_low_pfn) to sh_ksyms_32.c
  drivers/dma/ioat/dma.c: check DMA mapping error in ioat_dma_self_test()
  mm/memory-failure.c: transfer page count from head page to tail page after split thp
  MAINTAINERS: set up proper record for Xilinx Zynq
  mm: remove bogus warning in copy_huge_pmd()
  memcg: fix memcg_size() calculation
  mm: fix use-after-free in sys_remap_file_pages
  mm: munlock: fix deadlock in __munlock_pagevec()
  mm: munlock: fix a bug where THP tail page is encountered

The EPOLL_CTL_DEL path of epoll contains a classic, ab-ba deadlock.
That is, epoll_ctl(a, EPOLL_CTL_DEL, b, x), will deadlock with
epoll_ctl(b, EPOLL_CTL_DEL, a, x).  The deadlock was introduced with
commmit 67347fe4 ("epoll: do not take global 'epmutex' for simple
topologies").

The acquistion of the ep->mtx for the destination 'ep' was added such
that a concurrent EPOLL_CTL_ADD operation would see the correct state of
the ep (Specifically, the check for '!list_empty(&f.file->f_ep_links')

However, by simply not acquiring the lock, we do not serialize behind
the ep->mtx from the add path, and thus may perform a full path check
when if we had waited a little longer it may not have been necessary.
However, this is a transient state, and performing the full loop
checking in this case is not harmful.

The important point is that we wouldn't miss doing the full loop
checking when required, since EPOLL_CTL_ADD always locks any 'ep's that
its operating upon.  The reason we don't need to do lock ordering in the
add path, is that we are already are holding the global 'epmutex'
whenever we do the double lock.  Further, the original posting of this
patch, which was tested for the intended performance gains, did not
perform this additional locking.
Signed-off-by: NJason Baron <jbaron@akamai.com>
Cc: Nathan Zimmer <nzimmer@sgi.com>
Cc: Eric Wong <normalperson@yhbt.net>
Cc: Nelson Elhage <nelhage@nelhage.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Min_low_pfn and max_low_pfn were used in pfn_valid macro if defined
CONFIG_FLATMEM.  When the functions that use the pfn_valid is used in
driver module, max_low_pfn and min_low_pfn is to undefined, and fail to
build.

  ERROR: "min_low_pfn" [drivers/block/aoe/aoe.ko] undefined!
  ERROR: "max_low_pfn" [drivers/block/aoe/aoe.ko] undefined!
  make[2]: *** [__modpost] Error 1
  make[1]: *** [modules] Error 2

This patch fix this problem.
Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Check DMA mapping return values in function ioat_dma_self_test() to get
rid of following warning message.

  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 1203 at lib/dma-debug.c:937 check_unmap+0x4c0/0x9a0()
  ioatdma 0000:00:04.0: DMA-API: device driver failed to check map error[device address=0x000000085191b000] [size=2000 bytes] [mapped as single]
  Modules linked in: ioatdma(+) mac_hid wmi acpi_pad lp parport hidd_generic usbhid hid ixgbe isci dca libsas ahci ptp libahci scsi_transport_sas meegaraid_sas pps_core mdio
  CPU: 0 PID: 1203 Comm: systemd-udevd Not tainted 3.13.0-rc4+ #8
  Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIIN1.86B.0044.L09.1311181644 11/18/2013
  Call Trace:
    dump_stack+0x4d/0x66
    warn_slowpath_common+0x7d/0xa0
    warn_slowpath_fmt+0x4c/0x50
    check_unmap+0x4c0/0x9a0
    debug_dma_unmap_page+0x81/0x90
    ioat_dma_self_test+0x3d2/0x680 [ioatdma]
    ioat3_dma_self_test+0x12/0x30 [ioatdma]
    ioat_probe+0xf4/0x110 [ioatdma]
    ioat3_dma_probe+0x268/0x410 [ioatdma]
    ioat_pci_probe+0x122/0x1b0 [ioatdma]
    local_pci_probe+0x45/0xa0
    pci_device_probe+0xd9/0x130
    driver_probe_device+0x171/0x490
    __driver_attach+0x93/0xa0
    bus_for_each_dev+0x6b/0xb0
    driver_attach+0x1e/0x20
    bus_add_driver+0x1f8/0x2b0
    driver_register+0x81/0x110
    __pci_register_driver+0x60/0x70
    ioat_init_module+0x89/0x1000 [ioatdma]
    do_one_initcall+0xe2/0x250
    load_module+0x2313/0x2a00
    SyS_init_module+0xd9/0x130
    system_call_fastpath+0x1a/0x1f
  ---[ end trace 990c591681d27c31 ]---
  Mapped at:
    debug_dma_map_page+0xbe/0x180
    ioat_dma_self_test+0x1ab/0x680 [ioatdma]
    ioat3_dma_self_test+0x12/0x30 [ioatdma]
    ioat_probe+0xf4/0x110 [ioatdma]
    ioat3_dma_probe+0x268/0x410 [ioatdma]
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Memory failures on thp tail pages cause kernel panic like below:

   mce: [Hardware Error]: Machine check events logged
   MCE exception done on CPU 7
   BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
   IP: [<ffffffff811b7cd1>] dequeue_hwpoisoned_huge_page+0x131/0x1e0
   PGD bae42067 PUD ba47d067 PMD 0
   Oops: 0000 [#1] SMP
  ...
   CPU: 7 PID: 128 Comm: kworker/7:2 Tainted: G   M       O 3.13.0-rc4-131217-1558-00003-g83b7df08e462 #25
  ...
   Call Trace:
     me_huge_page+0x3e/0x50
     memory_failure+0x4bb/0xc20
     mce_process_work+0x3e/0x70
     process_one_work+0x171/0x420
     worker_thread+0x11b/0x3a0
     ? manage_workers.isra.25+0x2b0/0x2b0
     kthread+0xe4/0x100
     ? kthread_create_on_node+0x190/0x190
     ret_from_fork+0x7c/0xb0
     ? kthread_create_on_node+0x190/0x190
  ...
   RIP   dequeue_hwpoisoned_huge_page+0x131/0x1e0
   CR2: 0000000000000058

The reasoning of this problem is shown below:
 - when we have a memory error on a thp tail page, the memory error
   handler grabs a refcount of the head page to keep the thp under us.
 - Before unmapping the error page from processes, we split the thp,
   where page refcounts of both of head/tail pages don't change.
 - Then we call try_to_unmap() over the error page (which was a tail
   page before). We didn't pin the error page to handle the memory error,
   this error page is freed and removed from LRU list.
 - We never have the error page on LRU list, so the first page state
   check returns "unknown page," then we move to the second check
   with the saved page flag.
 - The saved page flag have PG_tail set, so the second page state check
   returns "hugepage."
 - We call me_huge_page() for freed error page, then we hit the above panic.

The root cause is that we didn't move refcount from the head page to the
tail page after split thp.  So this patch suggests to do this.

This panic was introduced by commit 524fca1e ("HWPOISON: fix
misjudgement of page_action() for errors on mlocked pages").  Note that we
did have the same refcount problem before this commit, but it was just
ignored because we had only first page state check which returned "unknown
page." The commit changed the refcount problem from "doesn't work" to
"kernel panic."
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: <stable@vger.kernel.org>	[3.9+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Setup correct zynq entry.
 - Add missing cadence_ttc_timer maintainership
 - Add zynq wildcard
 - Add xilinx wildcard
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sasha Levin reported the following warning being triggered

  WARNING: CPU: 28 PID: 35287 at mm/huge_memory.c:887 copy_huge_pmd+0x145/ 0x3a0()
  Call Trace:
    copy_huge_pmd+0x145/0x3a0
    copy_page_range+0x3f2/0x560
    dup_mmap+0x2c9/0x3d0
    dup_mm+0xad/0x150
    copy_process+0xa68/0x12e0
    do_fork+0x96/0x270
    SyS_clone+0x16/0x20
    stub_clone+0x69/0x90

This warning was introduced by "mm: numa: Avoid unnecessary disruption
of NUMA hinting during migration" for paranoia reasons but the warning
is bogus.  I was thinking of parallel races between NUMA hinting faults
and forks but this warning would also be triggered by a parallel reclaim
splitting a THP during a fork.  Remote the bogus warning.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reported-by: NSasha Levin <sasha.levin@oracle.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The mem_cgroup structure contains nr_node_ids pointers to
mem_cgroup_per_node objects, not the objects themselves.
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

remap_file_pages calls mmap_region, which may merge the VMA with other
existing VMAs, and free "vma".  This can lead to a use-after-free bug.
Avoid the bug by remembering vm_flags before calling mmap_region, and
not trying to dereference vma later.
Signed-off-by: NRik van Riel <riel@redhat.com>
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 7225522b ("mm: munlock: batch non-THP page isolation and
munlock+putback using pagevec" introduced __munlock_pagevec() to speed
up munlock by holding lru_lock over multiple isolated pages.  Pages that
fail to be isolated are put_page()d immediately, also within the lock.

This can lead to deadlock when __munlock_pagevec() becomes the holder of
the last page pin and put_page() leads to __page_cache_release() which
also locks lru_lock.  The deadlock has been observed by Sasha Levin
using trinity.

This patch avoids the deadlock by deferring put_page() operations until
lru_lock is released.  Another pagevec (which is also used by later
phases of the function is reused to gather the pages for put_page()
operation.
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Reported-by: NSasha Levin <sasha.levin@oracle.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit ff6a6da6 ("mm: accelerate munlock() treatment of THP
pages") munlock skips tail pages of a munlocked THP page.  However, when
the head page already has PageMlocked unset, it will not skip the tail
pages.

Commit 7225522b ("mm: munlock: batch non-THP page isolation and
munlock+putback using pagevec") has added a PageTransHuge() check which
contains VM_BUG_ON(PageTail(page)).  Sasha Levin found this triggered
using trinity, on the first tail page of a THP page without PageMlocked
flag.

This patch fixes the issue by skipping tail pages also in the case when
PageMlocked flag is unset.  There is still a possibility of race with
THP page split between clearing PageMlocked and determining how many
pages to skip.  The race might result in former tail pages not being
skipped, which is however no longer a bug, as during the skip the
PageTail flags are cleared.

However this race also affects correctness of NR_MLOCK accounting, which
is to be fixed in a separate patch.
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Reported-by: NSasha Levin <sasha.levin@oracle.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull GFS2 fixes from Steven Whitehouse:
 "Here is a set of small fixes for GFS2.  There is a fix to drop
  s_umount which is copied in from the core vfs, two patches relate to a
  hard to hit "use after free" and memory leak.  Two patches related to
  using DIO and buffered I/O on the same file to ensure correct
  operation in relation to glock state changes.  The final patch adds an
  RCU read lock to ensure correct locking on an error path"

* tag 'gfs2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
  GFS2: Fix unsafe dereference in dump_holder()
  GFS2: Wait for async DIO in glock state changes
  GFS2: Fix incorrect invalidation for DIO/buffered I/O
  GFS2: Fix slab memory leak in gfs2_bufdata
  GFS2: Fix use-after-free race when calling gfs2_remove_from_ail
  GFS2: don't hold s_umount over blkdev_put

Pull s390 fixes from Martin Schwidefsky:
 "Two small bug fixes and a follow-up to the CONFIG_NR_CPUS change.

  A kernel compiled with CONFIG_NR_CPUS=256 will waste quite a bit of
  memory for the per-cpu arrays.  Under z/VM the maximum number of CPUs
  is 64, the code now limits the possible cpu mask to 64 if running
  under z/VM"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: obtain function handle in hotplug notifier
  s390/3270: fix allocation of tty3270_screen structure
  s390/smp: improve setup of possible cpu mask

Three reasons for doing this: 1. arch.walk_mmu points to arch.mmu anyway
in case nested EPT wasn't in use. 2. this aligns VMX with SVM. But 3. is
most important: nested_cpu_has_ept(vmcs12) queries the VMCS page, and if
one guest VCPU manipulates the page of another VCPU in L2, we may be
fooled to skip over the nested_ept_uninit_mmu_context, leaving mmu in
nested state. That can crash the host later on if nested_ept_get_cr3 is
invoked while L1 already left vmxon and nested.current_vmcs12 became
NULL therefore.

Cc: stable@kernel.org
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

GLOCK_BUG_ON() might call this function without RCU read lock. Make sure that
RCU read lock is held when using task_struct returned from pid_task().
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Pull radeon drm fixes from Dave Airlie:
 "Just piping a bunch of fixes from pre-xmas from Alex for radeon, all
  either fix bad hw setup issues or regressions"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: Bump version for CIK DCE tiling fix
  drm/radeon: set correct number of banks for CIK chips in DCE
  drm/radeon: set correct pipe config for Hawaii in DCE
  drm/radeon: expose render backend mask to the userspace
  drm/radeon: fix render backend setup for SI and CIK
  drm/radeon: 0x9649 is SUMO2 not SUMO
  drm/radeon: fix UVD 256MB check

Pull crypto fix from Herbert Xu:
 "Fix a build error on ARM that was introduced in 3.13-rc1"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ixp4xx - Fix kernel compile error

Radeon fixes, Christmas eve edition.  Fix incorrect family for 0x9649
which lead to bogus rendering, tiling and RB fixes for SI and CIK,
and a UVD fix.

* 'drm-fixes-3.13' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: Bump version for CIK DCE tiling fix
  drm/radeon: set correct number of banks for CIK chips in DCE
  drm/radeon: set correct pipe config for Hawaii in DCE
  drm/radeon: expose render backend mask to the userspace
  drm/radeon: fix render backend setup for SI and CIK
  drm/radeon: 0x9649 is SUMO2 not SUMO
  drm/radeon: fix UVD 256MB check

drivers/crypto/ixp4xx_crypto.c: In function 'ixp_module_init':
drivers/crypto/ixp4xx_crypto.c:1419:2: error: 'dev' undeclared (first use in this function)

Now builds. Not tested on real hw.
Signed-off-by: NKrzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Pull input updates from Dmitry Torokhov:
 "A fix for a panic in gpio-keys driver when set up with absolute
  events, a fixup to the new zforce driver and a new keycode definition"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: allocate absinfo data when setting ABS capability
  Input: define KEY_WWAN for Wireless WAN
  Input: zforce - fix possible driver hang during suspend

Pull cifs fixes from Steve French:
 "A few small cifs fixes including two for stable, and fixing a
  regression introduced by the VFS change to file create"

* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: set FILE_CREATED
  cifs: We do not drop reference to tlink in CIFSCheckMFSymlink()
  Add missing end of line termination to some cifs messages

We need to make sure we allocate absinfo data when we are setting one of
EV_ABS/ABS_XXX capabilities, otherwise we may bomb when we try to emit this
event.
Rested-by: NPaul Cercueil <pcercuei@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Pull devicetree fixes from Rob Herring:
 - Fix 2 regressions found on PPC
 - Allow NULL ptr in unflatten_and_copy_device_tree
 - Update my email address

* tag 'dt-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  MAINTAINERS: Update Rob Herring's email address
  of/irq: Fix device_node refcount in of_irq_parse_raw()
  of/Kconfig: Spelling s/one/once/
  Revert "of/address: Handle #address-cells > 2 specially"
  of: Fix NULL dereference in unflatten_and_copy()

Update arch.apic_base before triggering recalculate_apic_map. Otherwise
the recalculation will work against the previous state of the APIC and
will fail to build the correct map when an APIC is hardware-enabled
again.

This fixes a regression of 1e08ec4a.

Cc: stable@vger.kernel.org
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Pull powerpc fixes from Ben Herrenschmidt:
 "A bit more endian problems found during testing of 3.13 and a few
  other simple fixes and regressions fixes"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix alignment of secondary cpu spin vars
  powerpc: Align p_end
  powernv/eeh: Add buffer for P7IOC hub error data
  powernv/eeh: Fix possible buffer overrun in ioda_eeh_phb_diag()
  powerpc: Make 64-bit non-VMX __copy_tofrom_user bi-endian
  powerpc: Make unaligned accesses endian-safe for powerpc
  powerpc: Fix bad stack check in exception entry
  powerpc/512x: dts: disable MPC5125 usb module
  powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node (5125)

Pull networking fixes from David Miller:
 "Some holiday bug fixes for 3.13...  There is still one bug I'd like to
  get fixed before 3.13-final.

  The vlan code erroneously assignes the header ops of the underlying
  real device to the VLAN device above it when the real device can
  hardware offload VLAN handling.  That's completely bogus because
  header ops are tied to the device type, so they only expect to see a
  'dev' argument compatible with their ops.

  The fix is the have the VLAN code use a special set of header ops that
  does the pass-thru correctly, by calling the underlying real device's
  header ops but _also_ passing in the real device instead of the VLAN
  device.

  That fix is currently waiting some testing.

  Anyways, of note here:

   1) Fix bitmap edge case in radiotap, from Johannes Berg.

   2) Fix oops on driver unload in rtlwifi, from Larry Finger.

   3) Bonding doesn't do locking correctly during speed/duplex/link
      changes, from Ding Tianhong.

   4) Fix header parsing in GRE code, this bug has been around for a few
      releases.  From Timo Teräs.

   5) SIT tunnel driver MTU check needs to take GSO into account, from
      Eric Dumazet.

   6) Minor info leak in inet_diag, from Daniel Borkmann.

   7) Info leak in YAM hamradio driver, from Salva Peiró.

   8) Fix route expiration state handling in ipv6 routing code, from Li
      RongQing.

   9) DCCP probe module does not check request_module()'s return value,
      from Wang Weidong.

  10) cpsw driver passes NULL device names to request_irq(), from
      Mugunthan V N.

  11) Prevent a NULL splat in RDS binding code, from Sasha Levin.

  12) Fix 4G overflow test in tg3 driver, from Nithin Sujir.

  13) Cure use after free in arc_emac and fec driver's software
      timestamp handling, from Eric Dumazet.

  14) SIT driver can fail to release the route when
      iptunnel_handle_offloads() throws an error.  From Li RongQing.

  15) Several batman-adv fixes from Simon Wunderlich and Antonio
      Quartulli.

  16) Fix deadlock during TIPC socket release, from Ying Xue.

  17) Fix regression in ROSE protocol recvmsg() msg_name handling, from
      Florian Westphal.

  18) stmmac PTP support releases wrong spinlock, from Vince Bridgers"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits)
  stmmac: Fix incorrect spinlock release and PTP cap detection.
  phy: IRQ cannot be shared
  net: rose: restore old recvmsg behavior
  xen-netback: fix guest-receive-side array sizes
  fec: Do not assume that PHY reset is active low
  tipc: fix deadlock during socket release
  netfilter: nf_tables: fix wrong datatype in nft_validate_data_load()
  batman-adv: fix vlan header access
  batman-adv: clean nf state when removing protocol header
  batman-adv: fix alignment for batadv_tvlv_tt_change
  batman-adv: fix size of batadv_bla_claim_dst
  batman-adv: fix size of batadv_icmp_header
  batman-adv: fix header alignment by unrolling batadv_header
  batman-adv: fix alignment for batadv_coded_packet
  netfilter: nf_tables: fix oops when updating table with user chains
  netfilter: nf_tables: fix dumping with large number of sets
  ipv6: release dst properly in ipip6_tunnel_xmit
  netxen: Correct off-by-one errors in bounds checks
  net: Add some clarification to skb_tx_timestamp() comment.
  arc_emac: fix potential use after free
  ...

My Calxeda email address is going away.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NRob Herring <robh@kernel.org>

Commit 23616132, "of/irq: Refactor interrupt-map parsing" changed
the refcount on the device_node causing an error in of_node_put():

ERROR: Bad of_node_put() on /pci@800000020000000
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc3-dirty #2
Call Trace:
[c00000003e403500] [c0000000000144fc] .show_stack+0x7c/0x1f0 (unreliable)
[c00000003e4035d0] [c00000000070f250] .dump_stack+0x88/0xb4
[c00000003e403650] [c0000000005e8768] .of_node_release+0xd8/0xf0
[c00000003e4036e0] [c0000000005eeafc] .of_irq_parse_one+0x10c/0x280
[c00000003e4037a0] [c0000000005efd4c] .of_irq_parse_pci+0x3c/0x1d0
[c00000003e403840] [c000000000038240] .pcibios_setup_device+0xa0/0x2e0
[c00000003e403910] [c0000000000398f0] .pcibios_setup_bus_devices+0x60/0xd0
[c00000003e403990] [c00000000003b3a4] .__of_scan_bus+0x1a4/0x2b0
[c00000003e403a80] [c00000000003a62c] .pcibios_scan_phb+0x30c/0x410
[c00000003e403b60] [c0000000009fe430] .pcibios_init+0x7c/0xd4

This patch adjusts the refcount in the walk of the interrupt tree.
When a match is found, there is no need to increase the refcount
on 'out_irq->np' as 'newpar' is already holding a ref. The refcount
balance between 'ipar' and 'newpar' is maintained in the skiplevel:
goto label.

This patch also removes the usage of the device_node variable 'old'
which seems useless after the latest changes.
Signed-off-by: NCédric Le Goater <clg@fr.ibm.com>
Signed-off-by: NRob Herring <robh@kernel.org>

Signed-off-by: NGeert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: NRob Herring <robh@kernel.org>

This reverts commit e38c0a1f.

Nikita Yushchenko reports:
While trying to make freescale p2020ds and  mpc8572ds boards working
with mainline kernel, I faced that commit e38c0a1f (Handle

Both these boards have uli1575 chip.
Corresponding part in device tree is something like

                uli1575@0 {
                        reg = <0x0 0x0 0x0 0x0 0x0>;
                        #size-cells = <2>;
                        #address-cells = <3>;
                        ranges = <0x2000000 0x0 0x80000000
                                  0x2000000 0x0 0x80000000
                                  0x0 0x20000000

                                  0x1000000 0x0 0x0
                                  0x1000000 0x0 0x0
                                  0x0 0x10000>;
                        isa@1e {
...

I.e. it has #address-cells = <3>

With commit e38c0a1f reverted, devices under uli1575 are registered
correctly, e.g. for rtc

OF: ** translation for device /pcie@ffe09000/pcie@0/uli1575@0/isa@1e/rtc@70 **
OF: bus is isa (na=2, ns=1) on /pcie@ffe09000/pcie@0/uli1575@0/isa@1e
OF: translating address: 00000001 00000070
OF: parent bus is default (na=3, ns=2) on /pcie@ffe09000/pcie@0/uli1575@0
OF: walking ranges...
OF: ISA map, cp=0, s=1000, da=70
OF: parent translation for: 01000000 00000000 00000000
OF: with offset: 70
OF: one level translation: 00000000 00000000 00000070
OF: parent bus is pci (na=3, ns=2) on /pcie@ffe09000/pcie@0
OF: walking ranges...
OF: default map, cp=a0000000, s=20000000, da=70
OF: default map, cp=0, s=10000, da=70
OF: parent translation for: 01000000 00000000 00000000
OF: with offset: 70
OF: one level translation: 01000000 00000000 00000070
OF: parent bus is pci (na=3, ns=2) on /pcie@ffe09000
OF: walking ranges...
OF: PCI map, cp=0, s=10000, da=70
OF: parent translation for: 01000000 00000000 00000000
OF: with offset: 70
OF: one level translation: 01000000 00000000 00000070
OF: parent bus is default (na=2, ns=2) on /
OF: walking ranges...
OF: PCI map, cp=0, s=10000, da=70
OF: parent translation for: 00000000 ffc10000
OF: with offset: 70
OF: one level translation: 00000000 ffc10070
OF: reached root node

With commit e38c0a1f in place, address translation fails:

OF: ** translation for device /pcie@ffe09000/pcie@0/uli1575@0/isa@1e/rtc@70 **
OF: bus is isa (na=2, ns=1) on /pcie@ffe09000/pcie@0/uli1575@0/isa@1e
OF: translating address: 00000001 00000070
OF: parent bus is default (na=3, ns=2) on /pcie@ffe09000/pcie@0/uli1575@0
OF: walking ranges...
OF: ISA map, cp=0, s=1000, da=70
OF: parent translation for: 01000000 00000000 00000000
OF: with offset: 70
OF: one level translation: 00000000 00000000 00000070
OF: parent bus is pci (na=3, ns=2) on /pcie@ffe09000/pcie@0
OF: walking ranges...
OF: default map, cp=a0000000, s=20000000, da=70
OF: default map, cp=0, s=10000, da=70
OF: not found !

Thierry Reding confirmed this commit was not needed after all:
"We ended up merging a different address representation for Tegra PCIe
and I've confirmed that reverting this commit doesn't cause any obvious
regressions. I think all other drivers in drivers/pci/host ended up
copying what we did on Tegra, so I wouldn't expect any other breakage
either."

There doesn't appear to be a simple way to support both behaviours, so
reverting this as nothing should be depending on the new behaviour.

Cc: stable@vger.kernel.org # v3.7+
Signed-off-by: NRob Herring <robh@kernel.org>

When using the CLP interface to enable or disable a pci device a
valid function handle needs to be delivered. So far our assumption
was that we always have an up-to-date version of the function handle
(since it doesn't change when the device is in use). This assumption
is incorrect if the pci device is enabled or disabled outside of our
control. When we are notified about such a change we already receive
the new function handle. Just use it.
Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Anatolij writes:

Please pull two DTS fixes for MPC5125 tower board. Without
them the v3.13-rcX kernels do not boot.

This patch corrects a problem in stmmac_ptp.c, functions
stmmac_adjust_time and stmmac_adjust_freq where the incorrect spinlocks
were released. This patch also addresses a problem in stmmac_main,
function stmmac_init_ptp where the capability detection for
advanced timestamping was masked by message masking.

This patch was touch tested using linuxptp, and runs without the previously
observed instabilities. More extensive testing is ongoing.

Vince
Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With the way PHY IRQ handler is implemented (all real handling being pushed to
the workqueue and returning IRQ_HANDLED all the time PHY is active), we cannot
really claim that PHY IRQ can be shared when calling request_irq().
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

recvmsg handler in net/rose/af_rose.c performs size-check ->msg_namelen.

After commit f3d33426
(net: rework recvmsg handler msg_name and msg_namelen logic), we now
always take the else branch due to namelen being initialized to 0.

Digging in netdev-vger-cvs git repo shows that msg_namelen was
initialized with a fixed-size since at least 1995, so the else branch
was never taken.

Compile tested only.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The sizes chosen for the metadata and grant_copy_op arrays on the guest
receive size are wrong;

- The meta array is needlessly twice the ring size, when we only ever
  consume a single array element per RX ring slot
- The grant_copy_op array is way too small. It's sized based on a bogus
  assumption: that at most two copy ops will be used per ring slot. This
  may have been true at some point in the past but it's clear from looking
  at start_new_rx_buffer() that a new ring slot is only consumed if a frag
  would overflow the current slot (plus some other conditions) so the actual
  limit is MAX_SKB_FRAGS grant_copy_ops per ring slot.

This patch fixes those two sizing issues and, because grant_copy_ops grows
so much, it pulls it out into a separate chunk of vmalloc()ed memory.
Signed-off-by: NPaul Durrant <paul.durrant@citrix.com>
Acked-by: NWei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should not assume that the PHY reset is always active low.

Retrieve this information from the device tree instead, so that the PHY reset
can work on both cases.
Reported-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>