As Andi pointed out: CONFIG_GENERIC_ISA_DMA only disables the ISA DMA
channel management.  Other functionality may still expect GFP_DMA to
provide memory below 16M.  So we need to make sure that CONFIG_ZONE_DMA is
set independent of CONFIG_GENERIC_ISA_DMA.  Undo the modifications to
mm/Kconfig where we made ZONE_DMA dependent on GENERIC_ISA_DMA and set
theses explicitly in each arches Kconfig.

Reviews must occur for each arch in order to determine if ZONE_DMA can be
switched off.  It can only be switched off if we know that all devices
supported by a platform are capable of performing DMA transfers to all of
memory (Some arches already support this: uml, avr32, sh sh64, parisc and
IA64/Altix).

In order to switch ZONE_DMA off conditionally, one would have to establish
a scheme by which one can assure that no drivers are enabled that are only
capable of doing I/O to a part of memory, or one needs to provide an
alternate means of performing an allocation from a specific range of memory
(like provided by alloc_pages_range()) and insure that all drivers use that
call.  In that case the arches alloc_dma_coherent() may need to be modified
to call alloc_pages_range() instead of relying on GFP_DMA.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

sh / sh64: Remove ZONE_DMA remains.

Both arches do not need ZONE_DMA
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove ZONE_DMA remains from parisc so that kernels are build without
ZONE_DMA.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ZONE_DMA less operation for IA64 SGI platform

Disable ZONE_DMA for SGI SN2.  All memory is addressable by all devices and we
do not need any special memory pool.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make ZONE_DMA optional in core code.

- ifdef all code for ZONE_DMA and related definitions following the example
  for ZONE_DMA32 and ZONE_HIGHMEM.

- Without ZONE_DMA, ZONE_HIGHMEM and ZONE_DMA32 we get to a ZONES_SHIFT of
  0.

- Modify the VM statistics to work correctly without a DMA zone.

- Modify slab to not create DMA slabs if there is no ZONE_DMA.

[akpm@osdl.org: cleanup]
[jdike@addtoit.com: build fix]
[apw@shadowen.org: Simplify calculation of the number of bits we need for ZONES_SHIFT]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch simply defines CONFIG_ZONE_DMA for all arches.  We later do special
things with CONFIG_ZONE_DMA after the VM and an arch are prepared to work
without ZONE_DMA.

CONFIG_ZONE_DMA can be defined in two ways depending on how an architecture
handles ISA DMA.

First if CONFIG_GENERIC_ISA_DMA is set by the arch then we know that the arch
needs ZONE_DMA because ISA DMA devices are supported.  We can catch this in
mm/Kconfig and do not need to modify arch code.

Second, arches may use ZONE_DMA in an unknown way.  We set CONFIG_ZONE_DMA for
all arches that do not set CONFIG_GENERIC_ISA_DMA in order to insure backwards
compatibility.  The arches may later undefine ZONE_DMA if their arch code has
been verified to not depend on ZONE_DMA.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patchset follows up on the earlier work in Andrew's tree to reduce the
number of zones.  The patches allow to go to a minimum of 2 zones.  This one
allows also to make ZONE_DMA optional and therefore the number of zones can be
reduced to one.

ZONE_DMA is usually used for ISA DMA devices.  There are a number of reasons
why we would not want to have ZONE_DMA

1. Some arches do not need ZONE_DMA at all.

2. With the advent of IOMMUs DMA zones are no longer needed.
   The necessity of DMA zones may drastically be reduced
   in the future. This patchset allows a compilation of
   a kernel without that overhead.

3. Devices that require ISA DMA get rare these days. All
   my systems do not have any need for ISA DMA.

4. The presence of an additional zone unecessarily complicates
   VM operations because it must be scanned and balancing
   logic must operate on its.

5. With only ZONE_NORMAL one can reach the situation where
   we have only one zone. This will allow the unrolling of many
   loops in the VM and allows the optimization of varous
   code paths in the VM.

6. Having only a single zone in a NUMA system results in a
   1-1 correspondence between nodes and zones. Various additional
   optimizations to critical VM paths become possible.

Many systems today can operate just fine with a single zone.  If you look at
what is in ZONE_DMA then one usually sees that nothing uses it.  The DMA slabs
are empty (Some arches use ZONE_DMA instead of ZONE_NORMAL, then ZONE_NORMAL
will be empty instead).

On all of my systems (i386, x86_64, ia64) ZONE_DMA is completely empty.  Why
constantly look at an empty zone in /proc/zoneinfo and empty slab in
/proc/slabinfo?  Non i386 also frequently have no need for ZONE_DMA and zones
stay empty.

The patchset was tested on i386 (UP / SMP), x86_64 (UP, NUMA) and ia64 (NUMA).

The RFC posted earlier (see
http://marc.theaimsgroup.com/?l=linux-kernel&m=115231723513008&w=2) had lots
of #ifdefs in them.  An effort has been made to minize the number of #ifdefs
and make this as compact as possible.  The job was made much easier by the
ongoing efforts of others to extract common arch specific functionality.

I have been running this for awhile now on my desktop and finally Linux is
using all my available RAM instead of leaving the 16MB in ZONE_DMA untouched:

christoph@pentium940:~$ cat /proc/zoneinfo
Node 0, zone   Normal
  pages free     4435
        min      1448
        low      1810
        high     2172
        active   241786
        inactive 210170
        scanned  0 (a: 0 i: 0)
        spanned  524224
        present  524224
    nr_anon_pages 61680
    nr_mapped    14271
    nr_file_pages 390264
    nr_slab_reclaimable 27564
    nr_slab_unreclaimable 1793
    nr_page_table_pages 449
    nr_dirty     39
    nr_writeback 0
    nr_unstable  0
    nr_bounce    0
    cpu: 0 pcp: 0
              count: 156
              high:  186
              batch: 31
    cpu: 0 pcp: 1
              count: 9
              high:  62
              batch: 15
  vm stats threshold: 20
    cpu: 1 pcp: 0
              count: 177
              high:  186
              batch: 31
    cpu: 1 pcp: 1
              count: 12
              high:  62
              batch: 15
  vm stats threshold: 20
  all_unreclaimable: 0
  prev_priority:     12
  temp_priority:     12
  start_pfn:         0

This patch:

In two places in the VM we use ZONE_DMA to refer to the first zone.  If
ZONE_DMA is optional then other zones may be first.  So simply replace
ZONE_DMA with zone 0.

This also fixes ZONETABLE_PGSHIFT.  If we have only a single zone then
ZONES_PGSHIFT may become 0 because there is no need anymore to encode the zone
number related to a pgdat.  However, we still need a zonetable to index all
the zones for each node if this is a NUMA system.  Therefore define
ZONETABLE_SHIFT unconditionally as the offset of the ZONE field in page flags.

[apw@shadowen.org: fix mismerge]
Acked-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Values are available via ZVC sums.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Values are readily available via ZVC per node and global sums.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Function is unnecessary now.  We can use the summing features of the ZVCs to
get the values we need.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

nr_free_pages is now a simple access to a global variable.  Make it a macro
instead of a function.

The nr_free_pages now requires vmstat.h to be included.  There is one
occurrence in power management where we need to add the include.  Directly
refrer to global_page_state() there to clarify why the #include was added.

[akpm@osdl.org: arm build fix]
[akpm@osdl.org: sparc64 build fix]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The global and per zone counter sums are in arrays of longs.  Reorder the ZVCs
so that the most frequently used ZVCs are put into the same cacheline.  That
way calculations of the global, node and per zone vm state touches only a
single cacheline.  This is mostly important for 64 bit systems were one 128
byte cacheline takes only 8 longs.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is again simplifies some of the VM counter calculations through the use
of the ZVC consolidated counters.

[michal.k.k.piotrowski@gmail.com: build fix]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The determination of the dirty ratio to determine writeback behavior is
currently based on the number of total pages on the system.

However, not all pages in the system may be dirtied.  Thus the ratio is always
too low and can never reach 100%.  The ratio may be particularly skewed if
large hugepage allocations, slab allocations or device driver buffers make
large sections of memory not available anymore.  In that case we may get into
a situation in which f.e.  the background writeback ratio of 40% cannot be
reached anymore which leads to undesired writeback behavior.

This patchset fixes that issue by determining the ratio based on the actual
pages that may potentially be dirty.  These are the pages on the active and
the inactive list plus free pages.

The problem with those counts has so far been that it is expensive to
calculate these because counts from multiple nodes and multiple zones will
have to be summed up.  This patchset makes these counters ZVC counters.  This
means that a current sum per zone, per node and for the whole system is always
available via global variables and not expensive anymore to calculate.

The patchset results in some other good side effects:

- Removal of the various functions that sum up free, active and inactive
  page counts

- Cleanup of the functions that display information via the proc filesystem.

This patch:

The use of a ZVC for nr_inactive and nr_active allows a simplification of some
counter operations.  More ZVC functionality is used for sums etc in the
following patches.

[akpm@osdl.org: UP build fix]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After do_wp_page has tested page_mkwrite, it must release old_page after
acquiring page table lock, not before: at some stage that ordering got
reversed, leaving a (very unlikely) window in which old_page might be
truncated, freed, and reused in the same position.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With CONFIG_SPARSEMEM=y:

mm/rmap.c:579: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'int'

Make __page_to_pfn() return unsigned long.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This early break prevents us from displaying info for the vm stats thresholds
if the zone doesn't have any pages in its per-cpu pagesets.

So my 800MB i386 box says:

Node 0, zone      DMA
  pages free     2365
        min      16
        low      20
        high     24
        active   0
        inactive 0
        scanned  0 (a: 0 i: 0)
        spanned  4096
        present  4044
    nr_anon_pages 0
    nr_mapped    1
    nr_file_pages 0
    nr_slab_reclaimable 0
    nr_slab_unreclaimable 0
    nr_page_table_pages 0
    nr_dirty     0
    nr_writeback 0
    nr_unstable  0
    nr_bounce    0
    nr_vmscan_write 0
        protection: (0, 868, 868)
  pagesets
  all_unreclaimable: 0
  prev_priority:     12
  start_pfn:         0
Node 0, zone   Normal
  pages free     199713
        min      934
        low      1167
        high     1401
        active   10215
        inactive 4507
        scanned  0 (a: 0 i: 0)
        spanned  225280
        present  222420
    nr_anon_pages 2685
    nr_mapped    1110
    nr_file_pages 12055
    nr_slab_reclaimable 2216
    nr_slab_unreclaimable 1527
    nr_page_table_pages 213
    nr_dirty     0
    nr_writeback 0
    nr_unstable  0
    nr_bounce    0
    nr_vmscan_write 0
        protection: (0, 0, 0)
  pagesets
    cpu: 0 pcp: 0
              count: 152
              high:  186
              batch: 31
    cpu: 0 pcp: 1
              count: 13
              high:  62
              batch: 15
  vm stats threshold: 16
    cpu: 1 pcp: 0
              count: 34
              high:  186
              batch: 31
    cpu: 1 pcp: 1
              count: 10
              high:  62
              batch: 15
  vm stats threshold: 16
  all_unreclaimable: 0
  prev_priority:     12
  start_pfn:         4096

Just nuke all that search-for-the-first-non-empty-pageset code.  Dunno why it
was there in the first place..

Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

find_min_pfn_for_node() and find_min_pfn_with_active_regions() sort
early_node_map[] on every call.  This is an excessive amount of sorting and
that can be avoided.  This patch always searches the whole early_node_map[]
in find_min_pfn_for_node() instead of returning the first value found.  The
map is then only sorted once when required.  Successfully boot tested on a
number of machines.

[akpm@osdl.org: cleanup]
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the last vestiges of the long-deprecated "MAP_ANON" page protection
flag: use "MAP_ANONYMOUS" instead.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the pointer passed to cache_reap to determine the work pointer and
consolidate exit paths.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Clean up __cache_alloc and __cache_alloc_node functions a bit.  We no
longer need to do NUMA_BUILD tricks and the UMA allocation path is much
simpler.  No functional changes in this patch.

Note: saves few kernel text bytes on x86 NUMA build due to using gotos in
__cache_alloc_node() and moving __GFP_THISNODE check in to
fallback_alloc().

Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Acked-by: NChristoph Lameter <christoph@lameter.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The PageSlab debug check in kfree_debugcheck() is broken for compound
pages.  It is also redundant as we already do BUG_ON for non-slab pages in
page_get_cache() and page_get_slab() which are always called before we free
any actual objects.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The ATA_ENABLE_PATA define was never meant to be permanent, and in
recent kernels, it's already been unconditionally enabled.  Remove.
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NJeff Garzik <jeff@garzik.org>

If we are doing a PIO setup for a CFA card and it blows up with a device
error then assume it is an older CFA card which doesn't support this
rather than failing the device out of existance.

Stands seperate to the quieting patch but that is obviously useful with
this change.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

ata_pci_device_do_resume can fail if the PCI device couldn't be re-enabled.
 Update sata_nv to propagate the return value from this call and to not try
to do any other resume activities if it fails.  Fixes a compile warning.
Signed-off-by: NRobert Hancock <hancockr@shaw.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Update sata_nv to wait for the controller to indicate via the status
register that it has entered the requested state when switching between
ADMA mode and register mode.  This issue came up recently when debugging
some problems with cache flush command timeouts and while it didn't appear
to fix that problem, this is something we should likely be doing in any
case.
Signed-off-by: NRobert Hancock <hancockr@shaw.ca>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Some problems showed up recently with cache flush commands timing out on
sata_nv.  Previously these commands were always handled by transitioning to
legacy mode from ADMA mode first.  The timeout problem was worked around
already by a change to the interrupt handling code for legacy mode, but for
non-data commands like these it appears we can handle them in ADMA mode, so
the switch to legacy mode is not needed.

This patch changes the behavior so that we use ADMA mode to submit
interrupt-driven commands with ATA_PROT_NODATA protocol.  In addition to
avoiding the problem mentioned above entirely, this avoids the overhead of
switching to legacy mode and back to ADMA mode for handling cache flushes.
When handling non-DMA-mapped commands, we leave the APRD blank and clear
the NV_CPB_CTL_APRD_VALID field in the CPB so the controller does not
attempt to read it.
Signed-off-by: NRobert Hancock <hancockr@shaw.ca>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This cleans up a few issues with the error handling in sata_nv in ADMA mode
to make it more consistent with other NCQ-capable drivers like ahci and
sata_sil24:

- When a command failed, we would effectively set AC_ERR_DEV on the
  queued command always.  In the case of NCQ commands this prevents libata
  from doing a log page query to determine the details of the failed
  command, since it thinks we've already analyzed.  Just set flags in the
  port ehi->err_mask, then freeze or abort and let libata figure out what
  went wrong.

- The code handled NV_ADMA_STAT_CPBERR as a "really bad error" which
  caused it to set error flags on every queued command.  I don't know
  exactly what this flag means (no docs, grr!) but from what I can guess
  from the standard ADMA spec, it just means that one or more of the CPBs
  had an error, so we just need to go through and do our normal checks in
  this case.

- In the error_handler function the code would always dump the state of
  all the CPBs.  This output seems redundant at this point since libata
  already dumps the state of all active commands on errors (and it also
  triggers at times when it shouldn't, like when suspending).  Take this
  out.

[akpm@osdl.org: many coding-style fixes]
Signed-off-by: NRobert Hancock <hancockr@shaw.ca>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Allen Martin <AMartin@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

MPIIX has only single channel IDE which can be configured for either primary or
secondary legacy I/O ports and IRQ.  So, get rid of the unneeded second probe
entry in mpiix_init_one() and of the invalid (but unused anyway) enable bits in
mpiix_pre_reset().

Warning: this cleanup has only been compile-tested...
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix clearing/setting the wrong TIME/IE/PPE bits for a slave drive caused by a
wrong shift count.
Fix the PIO mode 1 being overclocked by wrongly selecting the fast timing bank.
Also, fix/rephrase some comments while at it.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix the PIO mode 2 using mode 0 timings -- this driver should enable the
fast timing bank starting with PIO2, just like the ata_piix driver does.
Also, fix/rephrase some comments while at it.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

IORDY and IORDY enable/disable flags.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

People are getting confused about which drivers to enable for PATA PIIX
type devices. Change the ATA_PIIX line and help to make it clearer.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

* Hardreset must not exit without actually performing reset regardless
  of link status.  We're resetting the link after all.

* Minor message update.

* 150ms delay is meaningful iff link is online after reset is
  complete.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Follow the old SRST rule and delay 150ms between completion of
hardreset and status checking.  Debouncing delay should usually cover
this but debounce duration could be shorter than 150ms under certain
circumstances.

Usefulness depends on host controller implementation but it can't hurt
and serves as a reminder that 2s delay for GoVault should also be
added here.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Per Jeff's suggestion, this patch rearranges the info printed for ATA
drives into dmesg to add the full ATA firmware revision and model
information, while keeping the output to 2 lines.
Signed-off-by: NEric D. Mudama <edmudama@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fix the wrong "compatible" PIO mode choices: MWDMA0 has 480 ns cycle while PIO1
only has 383 ns cycle, and MWDMA2 timings matchs those of PIO4 exactly.
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This patch is against each libata driver.

Two IRQ calls are added in ata_port_operations.
- irq_on() is used to enable interrupts.
- irq_ack() is used to acknowledge a device interrupt.

In most drivers, ata_irq_on() and ata_irq_ack() are used for
irq_on and irq_ack respectively.

In some drivers (ex: ahci, sata_sil24) which cannot use them
as is, ata_dummy_irq_on() and ata_dummy_irq_ack() are used.
Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: NAkira Iguchi <akira2.iguchi@toshiba.co.jp>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This patch is against the libata core and headers.

Two IRQ calls are added in ata_port_operations.
- irq_on() is used to enable interrupts.
- irq_ack() is used to acknowledge a device interrupt.

In most drivers, ata_irq_on() and ata_irq_ack() are used for
irq_on and irq_ack respectively.

In some drivers (ex: ahci, sata_sil24) which cannot use them
as is, ata_dummy_irq_on() and ata_dummy_irq_ack() are used.
Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: NAkira Iguchi <akira2.iguchi@toshiba.co.jp>
Signed-off-by: NJeff Garzik <jeff@garzik.org>