libata: rearrange dmesg info to add full ATA revision

Per Jeff's suggestion, this patch rearranges the info printed for ATA
drives into dmesg to add the full ATA firmware revision and model
information, while keeping the output to 2 lines.
Signed-off-by: NEric D. Mudama <edmudama@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

drivers/ata/libata-core.c

@@ -1540,6 +1540,8 @@ int ata_dev_configure(struct ata_device *dev)
 	const u16 *id = dev->id;
 	unsigned int xfer_mask;
 	char revbuf[7];		/* XYZ-99\0 */
+	char fwrevbuf[ATA_ID_FW_REV_LEN+1];
+	char modelbuf[ATA_ID_PROD_LEN+1];
 	int rc;
 
 	if (!ata_dev_enabled(dev) && ata_msg_info(ap)) {
@@ -1594,6 +1596,16 @@ int ata_dev_configure(struct ata_device *dev)
 
 		dev->n_sectors = ata_id_n_sectors(id);
 
+		/* SCSI only uses 4-char revisions, dump full 8 chars from ATA */
+		ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV_OFS,
+				sizeof(fwrevbuf));
+
+		ata_id_c_string(dev->id, modelbuf, ATA_ID_PROD_OFS,
+				sizeof(modelbuf));
+
+		if (dev->id[59] & 0x100)
+			dev->multi_count = dev->id[59] & 0xff;
+
 		if (ata_id_has_lba(id)) {
 			const char *lba_desc;
 			char ncq_desc[20];
@@ -1613,13 +1625,16 @@ int ata_dev_configure(struct ata_device *dev)
 			ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
 
 			/* print device info to dmesg */
-			if (ata_msg_drv(ap) && print_info)
-				ata_dev_printk(dev, KERN_INFO, "%s, "
-					"max %s, %Lu sectors: %s %s\n",
-					revbuf,
-					ata_mode_string(xfer_mask),
+			if (ata_msg_drv(ap) && print_info) {
+				ata_dev_printk(dev, KERN_INFO,
+					"%s: %s, %s, max %s\n",
+					revbuf, modelbuf, fwrevbuf,
+					ata_mode_string(xfer_mask));
+				ata_dev_printk(dev, KERN_INFO,
+					"%Lu sectors, multi %u: %s %s\n",
 					(unsigned long long)dev->n_sectors,
-					lba_desc, ncq_desc);
+					dev->multi_count, lba_desc, ncq_desc);
+			}
 		} else {
 			/* CHS */
 
@@ -1636,22 +1651,17 @@ int ata_dev_configure(struct ata_device *dev)
 			}
 
 			/* print device info to dmesg */
-			if (ata_msg_drv(ap) && print_info)
-				ata_dev_printk(dev, KERN_INFO, "%s, "
-					"max %s, %Lu sectors: CHS %u/%u/%u\n",
-					revbuf,
-					ata_mode_string(xfer_mask),
-					(unsigned long long)dev->n_sectors,
-					dev->cylinders, dev->heads,
-					dev->sectors);
-		}
-
-		if (dev->id[59] & 0x100) {
-			dev->multi_count = dev->id[59] & 0xff;
-			if (ata_msg_drv(ap) && print_info)
+			if (ata_msg_drv(ap) && print_info) {
 				ata_dev_printk(dev, KERN_INFO,
-					"ata%u: dev %u multi count %u\n",
-					ap->id, dev->devno, dev->multi_count);
+					"%s: %s, %s, max %s\n",
+					revbuf,	modelbuf, fwrevbuf,
+					ata_mode_string(xfer_mask));
+				ata_dev_printk(dev, KERN_INFO, 
+					"%Lu sectors, multi %u, CHS %u/%u/%u\n",
+					(unsigned long long)dev->n_sectors,
+					dev->multi_count, dev->cylinders,
+					dev->heads, dev->sectors);
+			}
 		}
 
 		dev->cdb_len = 16;