[ Upstream commit eef3dc34a1e0b01d53328b88c25237bcc7323777 ]

When building the kernel with Clang, the following section mismatch
warning appears:

WARNING: vmlinux.o(.text+0x38b3c): Section mismatch in reference from
the function omap44xx_prm_late_init() to the function
.init.text:omap44xx_prm_enable_io_wakeup()
The function omap44xx_prm_late_init() references
the function __init omap44xx_prm_enable_io_wakeup().
This is often because omap44xx_prm_late_init lacks a __init
annotation or the annotation of omap44xx_prm_enable_io_wakeup is wrong.

Remove the __init annotation from omap44xx_prm_enable_io_wakeup so there
is no more mismatch.
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 867d0ad476db89a1e8af3f297af402399a54eea5 ]

Commit 04157469 ("net: Use static_key for XPS maps") introduced a
static key for XPS, but the increments/decrements don't match.

First, the static key's counter is incremented once for each queue, but
only decremented once for a whole batch of queues, leading to large
unbalances.

Second, the xps_rxqs_needed key is decremented whenever we reset a batch
of queues, whether they had any rxqs mapping or not, so that if we setup
cpu-XPS on em1 and RXQS-XPS on em2, resetting the queues on em1 would
decrement the xps_rxqs_needed key.

This reworks the accounting scheme so that the xps_needed key is
incremented only once for each type of XPS for all the queues on a
device, and the xps_rxqs_needed key is incremented only once for all
queues. This is sufficient to let us retrieve queues via
get_xps_queue().

This patch introduces a new reset_xps_maps(), which reinitializes and
frees the appropriate map (xps_rxqs_map or xps_cpus_map), and drops a
reference to the needed keys:
 - both xps_needed and xps_rxqs_needed, in case of rxqs maps,
 - only xps_needed, in case of CPU maps.

Now, we also need to call reset_xps_maps() at the end of
__netif_set_xps_queue() when there's no active map left, for example
when writing '00000000,00000000' to all queues' xps_rxqs setting.

Fixes: 04157469 ("net: Use static_key for XPS maps")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f28c020fb488e1a8b87469812017044bef88aa2b ]

Before commit 80d19669 ("net: Refactor XPS for CPUs and Rx queues"),
netif_reset_xps_queues() did netdev_queue_numa_node_write() for all the
queues being reset. Now, this is only done when the "active" variable in
clean_xps_maps() is false, ie when on all the CPUs, there's no active
XPS mapping left.

Fixes: 80d19669 ("net: Refactor XPS for CPUs and Rx queues")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4135cce7fd0a0d755665c02728578c7c5afe4726 ]

sctp_assoc_update_frag_point() should be called whenever asoc->pathmtu
changes, but we missed one place in sctp_association_init(). It would
cause frag_point is zero when sending data.

As says in Jakub's reproducer, if sp->pathmtu is set by socketopt, the
new asoc->pathmtu inherits it in sctp_association_init(). Later when
transports are added and their pmtu >= asoc->pathmtu, it will never
call sctp_assoc_update_frag_point() to set frag_point.

This patch is to fix it by updating frag_point after asoc->pathmtu is
set as sp->pathmtu in sctp_association_init(). Note that it moved them
after sctp_stream_init(), as stream->si needs to be set first.

Frag_point's calculation is also related with datachunk's type, so it
needs to update frag_point when stream->si may be changed in
sctp_process_init().

v1->v2:
  - call sctp_assoc_update_frag_point() separately in sctp_process_init
    and sctp_association_init, per Marcelo's suggestion.

Fixes: 2f5e3c9d ("sctp: introduce sctp_assoc_update_frag_point")
Reported-by: NJakub Audykowicz <jakub.audykowicz@gmail.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d7f7e0018b96fd1a30a968faa9464eb57372c1ec ]

The link modes that sfp_parse_support() detects are stored in the
'modes' bitmap. There is no reason to make an exception for 1000Base-PX
or 1000Base-BX10.

Fixes: 03145864 ("sfp: support 1G BiDi (eg, FiberStore SFP-GE-BX) modules")
Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Acked-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 436c9453a1ac0944b82870ef2e0d9be956b396d9 ]

We copy vnet header unconditionally in page_to_skb() this is wrong
since XDP may modify the packet data. So let's keep a zeroed vnet
header for not confusing the conversion between vnet header and skb
metadata.

In the future, we should able to detect whether or not the packet was
modified and keep using the vnet header when packet was not touched.

Fixes: f600b690 ("virtio_net: Add XDP support")
Reported-by: NPavel Popa <pashinho1990@gmail.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 35b827b6d06199841a83839e8bb69c0cd13a28be ]

It's not supported right now (the goal of the initial patch was to support
'ip link del' only).

Before the patch:
$ ip link add foo type tun
[  239.632660] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[snip]
[  239.636410] RIP: 0010:register_netdevice+0x8e/0x3a0

This panic occurs because dev->netdev_ops is not set by tun_setup(). But to
have something usable, it will require more than just setting
netdev_ops.

Fixes: f019a7a5 ("tun: Implement ip link del tunXXX")
CC: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b2b7af861122a0c0f6260155c29a1b2e594cd5b5 ]

TCP loss probe timer may fire when the retranmission queue is empty but
has a non-zero tp->packets_out counter. tcp_send_loss_probe will call
tcp_rearm_rto which triggers NULL pointer reference by fetching the
retranmission queue head in its sub-routines.

Add a more detailed warning to help catch the root cause of the inflight
accounting inconsistency.
Reported-by: NRafael Tinoco <rafael.tinoco@linaro.org>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 41727549de3e7281feb174d568c6e46823db8684 ]

If available rwnd is too small, tcp_tso_should_defer()
can decide it is worth waiting before splitting a TSO packet.

This really means we are rwnd limited.

Fixes: 5615f886 ("tcp: instrument how long TCP is limited by receive window")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fb6df5a6234c38a9c551559506a49a677ac6f07a ]

In sctp_hash_transport/sctp_epaddr_lookup_transport, it dereferences
a transport's asoc under rcu_read_lock while asoc is freed not after
a grace period, which leads to a use-after-free panic.

This patch fixes it by calling kfree_rcu to make asoc be freed after
a grace period.

Note that only the asoc's memory is delayed to free in the patch, it
won't cause sk to linger longer.

Thanks Neil and Marcelo to make this clear.

Fixes: 7fda702f ("sctp: use new rhlist interface on sctp transport rhashtable")
Fixes: cd2b7087 ("sctp: check duplicate node before inserting a new transport")
Reported-by: syzbot+0b05d8aa7cb185107483@syzkaller.appspotmail.com
Reported-by: syzbot+aad231d51b1923158444@syzkaller.appspotmail.com
Suggested-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 688838934c231bb08f46db687e57f6d8bf82709c ]

kmsan was able to trigger a kernel-infoleak using a gre device [1]

nlmsg_populate_fdb_fill() has a hard coded assumption
that dev->addr_len is ETH_ALEN, as normally guaranteed
for ARPHRD_ETHER devices.

A similar issue was fixed recently in commit da71577545a5
("rtnetlink: Disallow FDB configuration for non-Ethernet device")

[1]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:143 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x4c0/0x2700 lib/iov_iter.c:576
CPU: 0 PID: 6697 Comm: syz-executor310 Not tainted 4.20.0-rc3+ #95
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x32d/0x480 lib/dump_stack.c:113
 kmsan_report+0x12c/0x290 mm/kmsan/kmsan.c:683
 kmsan_internal_check_memory+0x32a/0xa50 mm/kmsan/kmsan.c:743
 kmsan_copy_to_user+0x78/0xd0 mm/kmsan/kmsan_hooks.c:634
 copyout lib/iov_iter.c:143 [inline]
 _copy_to_iter+0x4c0/0x2700 lib/iov_iter.c:576
 copy_to_iter include/linux/uio.h:143 [inline]
 skb_copy_datagram_iter+0x4e2/0x1070 net/core/datagram.c:431
 skb_copy_datagram_msg include/linux/skbuff.h:3316 [inline]
 netlink_recvmsg+0x6f9/0x19d0 net/netlink/af_netlink.c:1975
 sock_recvmsg_nosec net/socket.c:794 [inline]
 sock_recvmsg+0x1d1/0x230 net/socket.c:801
 ___sys_recvmsg+0x444/0xae0 net/socket.c:2278
 __sys_recvmsg net/socket.c:2327 [inline]
 __do_sys_recvmsg net/socket.c:2337 [inline]
 __se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334
 __x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334
 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x441119
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fffc7f008a8 EFLAGS: 00000207 ORIG_RAX: 000000000000002f
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000441119
RDX: 0000000000000040 RSI: 00000000200005c0 RDI: 0000000000000003
RBP: 00000000006cc018 R08: 0000000000000100 R09: 0000000000000100
R10: 0000000000000100 R11: 0000000000000207 R12: 0000000000402080
R13: 0000000000402110 R14: 0000000000000000 R15: 0000000000000000

Uninit was stored to memory at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:246 [inline]
 kmsan_save_stack mm/kmsan/kmsan.c:261 [inline]
 kmsan_internal_chain_origin+0x13d/0x240 mm/kmsan/kmsan.c:469
 kmsan_memcpy_memmove_metadata+0x1a9/0xf70 mm/kmsan/kmsan.c:344
 kmsan_memcpy_metadata+0xb/0x10 mm/kmsan/kmsan.c:362
 __msan_memcpy+0x61/0x70 mm/kmsan/kmsan_instr.c:162
 __nla_put lib/nlattr.c:744 [inline]
 nla_put+0x20a/0x2d0 lib/nlattr.c:802
 nlmsg_populate_fdb_fill+0x444/0x810 net/core/rtnetlink.c:3466
 nlmsg_populate_fdb net/core/rtnetlink.c:3775 [inline]
 ndo_dflt_fdb_dump+0x73a/0x960 net/core/rtnetlink.c:3807
 rtnl_fdb_dump+0x1318/0x1cb0 net/core/rtnetlink.c:3979
 netlink_dump+0xc79/0x1c90 net/netlink/af_netlink.c:2244
 __netlink_dump_start+0x10c4/0x11d0 net/netlink/af_netlink.c:2352
 netlink_dump_start include/linux/netlink.h:216 [inline]
 rtnetlink_rcv_msg+0x141b/0x1540 net/core/rtnetlink.c:4910
 netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4965
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x1699/0x1740 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x13c7/0x1440 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg net/socket.c:631 [inline]
 ___sys_sendmsg+0xe3b/0x1240 net/socket.c:2116
 __sys_sendmsg net/socket.c:2154 [inline]
 __do_sys_sendmsg net/socket.c:2163 [inline]
 __se_sys_sendmsg+0x305/0x460 net/socket.c:2161
 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:246 [inline]
 kmsan_internal_poison_shadow+0x6d/0x130 mm/kmsan/kmsan.c:170
 kmsan_kmalloc+0xa1/0x100 mm/kmsan/kmsan_hooks.c:186
 __kmalloc+0x14c/0x4d0 mm/slub.c:3825
 kmalloc include/linux/slab.h:551 [inline]
 __hw_addr_create_ex net/core/dev_addr_lists.c:34 [inline]
 __hw_addr_add_ex net/core/dev_addr_lists.c:80 [inline]
 __dev_mc_add+0x357/0x8a0 net/core/dev_addr_lists.c:670
 dev_mc_add+0x6d/0x80 net/core/dev_addr_lists.c:687
 ip_mc_filter_add net/ipv4/igmp.c:1128 [inline]
 igmp_group_added+0x4d4/0xb80 net/ipv4/igmp.c:1311
 __ip_mc_inc_group+0xea9/0xf70 net/ipv4/igmp.c:1444
 ip_mc_inc_group net/ipv4/igmp.c:1453 [inline]
 ip_mc_up+0x1c3/0x400 net/ipv4/igmp.c:1775
 inetdev_event+0x1d03/0x1d80 net/ipv4/devinet.c:1522
 notifier_call_chain kernel/notifier.c:93 [inline]
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x13d/0x240 kernel/notifier.c:401
 __dev_notify_flags+0x3da/0x860 net/core/dev.c:1733
 dev_change_flags+0x1ac/0x230 net/core/dev.c:7569
 do_setlink+0x165f/0x5ea0 net/core/rtnetlink.c:2492
 rtnl_newlink+0x2ad7/0x35a0 net/core/rtnetlink.c:3111
 rtnetlink_rcv_msg+0x1148/0x1540 net/core/rtnetlink.c:4947
 netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4965
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x1699/0x1740 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x13c7/0x1440 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg net/socket.c:631 [inline]
 ___sys_sendmsg+0xe3b/0x1240 net/socket.c:2116
 __sys_sendmsg net/socket.c:2154 [inline]
 __do_sys_sendmsg net/socket.c:2163 [inline]
 __se_sys_sendmsg+0x305/0x460 net/socket.c:2161
 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7

Bytes 36-37 of 105 are uninitialized
Memory access of size 105 starts at ffff88819686c000
Data copied to user address 0000000020000380

Fixes: d83b0603 ("net: add fdb generic dump routine")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Ido Schimmel <idosch@mellanox.com>
Cc: David Ahern <dsahern@gmail.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 5b3279e2cba2238b37f6c18adfdea8bddb32715a ]

This reverts commit 624ca9c3.

This commit is completely bogus. The STACR register has two formats, old
and new, depending on the version of the IP block used. There's a pair of
device-tree properties that can be used to specify the format used:

	has-inverted-stacr-oc
	has-new-stacr-staopc

What this commit did was to change the bit definition used with the old
parts to match the new parts. This of course breaks the driver on all
the old ones.

Instead, the author should have set the appropriate properties in the
device-tree for the variant used on his board.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 22f6bbb7bcfcef0b373b0502a7ff390275c575dd ]

list_del() leaves the skb->next pointer poisoned, which can then lead to
 a crash in e.g. OVS forwarding.  For example, setting up an OVS VXLAN
 forwarding bridge on sfc as per:

========
$ ovs-vsctl show
5dfd9c47-f04b-4aaa-aa96-4fbb0a522a30
    Bridge "br0"
        Port "br0"
            Interface "br0"
                type: internal
        Port "enp6s0f0"
            Interface "enp6s0f0"
        Port "vxlan0"
            Interface "vxlan0"
                type: vxlan
                options: {key="1", local_ip="10.0.0.5", remote_ip="10.0.0.4"}
    ovs_version: "2.5.0"
========
(where 10.0.0.5 is an address on enp6s0f1)
and sending traffic across it will lead to the following panic:
========
general protection fault: 0000 [#1] SMP PTI
CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.20.0-rc3-ehc+ #701
Hardware name: Dell Inc. PowerEdge R710/0M233H, BIOS 6.4.0 07/23/2013
RIP: 0010:dev_hard_start_xmit+0x38/0x200
Code: 53 48 89 fb 48 83 ec 20 48 85 ff 48 89 54 24 08 48 89 4c 24 18 0f 84 ab 01 00 00 48 8d 86 90 00 00 00 48 89 f5 48 89 44 24 10 <4c> 8b 33 48 c7 03 00 00 00 00 48 8b 05 c7 d1 b3 00 4d 85 f6 0f 95
RSP: 0018:ffff888627b437e0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: dead000000000100 RCX: ffff88862279c000
RDX: ffff888614a342c0 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff888618a88000 R08: 0000000000000001 R09: 00000000000003e8
R10: 0000000000000000 R11: ffff888614a34140 R12: 0000000000000000
R13: 0000000000000062 R14: dead000000000100 R15: ffff888616430000
FS:  0000000000000000(0000) GS:ffff888627b40000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6d2bc6d000 CR3: 000000000200a000 CR4: 00000000000006e0
Call Trace:
 <IRQ>
 __dev_queue_xmit+0x623/0x870
 ? masked_flow_lookup+0xf7/0x220 [openvswitch]
 ? ep_poll_callback+0x101/0x310
 do_execute_actions+0xaba/0xaf0 [openvswitch]
 ? __wake_up_common+0x8a/0x150
 ? __wake_up_common_lock+0x87/0xc0
 ? queue_userspace_packet+0x31c/0x5b0 [openvswitch]
 ovs_execute_actions+0x47/0x120 [openvswitch]
 ovs_dp_process_packet+0x7d/0x110 [openvswitch]
 ovs_vport_receive+0x6e/0xd0 [openvswitch]
 ? dst_alloc+0x64/0x90
 ? rt_dst_alloc+0x50/0xd0
 ? ip_route_input_slow+0x19a/0x9a0
 ? __udp_enqueue_schedule_skb+0x198/0x1b0
 ? __udp4_lib_rcv+0x856/0xa30
 ? __udp4_lib_rcv+0x856/0xa30
 ? cpumask_next_and+0x19/0x20
 ? find_busiest_group+0x12d/0xcd0
 netdev_frame_hook+0xce/0x150 [openvswitch]
 __netif_receive_skb_core+0x205/0xae0
 __netif_receive_skb_list_core+0x11e/0x220
 netif_receive_skb_list+0x203/0x460
 ? __efx_rx_packet+0x335/0x5e0 [sfc]
 efx_poll+0x182/0x320 [sfc]
 net_rx_action+0x294/0x3c0
 __do_softirq+0xca/0x297
 irq_exit+0xa6/0xb0
 do_IRQ+0x54/0xd0
 common_interrupt+0xf/0xf
 </IRQ>
========
So, in all listified-receive handling, instead pull skbs off the lists with
 skb_list_del_init().

Fixes: 9af86f93 ("net: core: fix use-after-free in __netif_receive_skb_list_core")
Fixes: 7da517a3 ("net: core: Another step of skb receive list processing")
Fixes: a4ca8b7d ("net: ipv4: fix drop handling in ip_list_rcv() and ip_list_rcv_finish()")
Fixes: d8269e2c ("net: ipv6: listify ipv6_rcv() and ip6_rcv_finish()")
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 9410d386d0a829ace9558336263086c2fbbe8aed ]

__qdisc_drop_all() accesses skb->prev to get to the tail of the
segment-list.

With commit 68d2f84a ("net: gro: properly remove skb from list")
the skb-list handling has been changed to set skb->next to NULL and set
the list-poison on skb->prev.

With that change, __qdisc_drop_all() will panic when it tries to
dereference skb->prev.

Since commit 992cba7e276d ("net: Add and use skb_list_del_init().")
__list_del_entry is used, leaving skb->prev unchanged (thus,
pointing to the list-head if it's the first skb of the list).
This will make __qdisc_drop_all modify the next-pointer of the list-head
and result in a panic later on:

[   34.501053] general protection fault: 0000 [#1] SMP KASAN PTI
[   34.501968] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.20.0-rc2.mptcp #108
[   34.502887] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
[   34.504074] RIP: 0010:dev_gro_receive+0x343/0x1f90
[   34.504751] Code: e0 48 c1 e8 03 42 80 3c 30 00 0f 85 4a 1c 00 00 4d 8b 24 24 4c 39 65 d0 0f 84 0a 04 00 00 49 8d 7c 24 38 48 89 f8 48 c1 e8 03 <42> 0f b6 04 30 84 c0 74 08 3c 04
[   34.507060] RSP: 0018:ffff8883af507930 EFLAGS: 00010202
[   34.507761] RAX: 0000000000000007 RBX: ffff8883970b2c80 RCX: 1ffff11072e165a6
[   34.508640] RDX: 1ffff11075867008 RSI: ffff8883ac338040 RDI: 0000000000000038
[   34.509493] RBP: ffff8883af5079d0 R08: ffff8883970b2d40 R09: 0000000000000062
[   34.510346] R10: 0000000000000034 R11: 0000000000000000 R12: 0000000000000000
[   34.511215] R13: 0000000000000000 R14: dffffc0000000000 R15: ffff8883ac338008
[   34.512082] FS:  0000000000000000(0000) GS:ffff8883af500000(0000) knlGS:0000000000000000
[   34.513036] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   34.513741] CR2: 000055ccc3e9d020 CR3: 00000003abf32000 CR4: 00000000000006e0
[   34.514593] Call Trace:
[   34.514893]  <IRQ>
[   34.515157]  napi_gro_receive+0x93/0x150
[   34.515632]  receive_buf+0x893/0x3700
[   34.516094]  ? __netif_receive_skb+0x1f/0x1a0
[   34.516629]  ? virtnet_probe+0x1b40/0x1b40
[   34.517153]  ? __stable_node_chain+0x4d0/0x850
[   34.517684]  ? kfree+0x9a/0x180
[   34.518067]  ? __kasan_slab_free+0x171/0x190
[   34.518582]  ? detach_buf+0x1df/0x650
[   34.519061]  ? lapic_next_event+0x5a/0x90
[   34.519539]  ? virtqueue_get_buf_ctx+0x280/0x7f0
[   34.520093]  virtnet_poll+0x2df/0xd60
[   34.520533]  ? receive_buf+0x3700/0x3700
[   34.521027]  ? qdisc_watchdog_schedule_ns+0xd5/0x140
[   34.521631]  ? htb_dequeue+0x1817/0x25f0
[   34.522107]  ? sch_direct_xmit+0x142/0xf30
[   34.522595]  ? virtqueue_napi_schedule+0x26/0x30
[   34.523155]  net_rx_action+0x2f6/0xc50
[   34.523601]  ? napi_complete_done+0x2f0/0x2f0
[   34.524126]  ? kasan_check_read+0x11/0x20
[   34.524608]  ? _raw_spin_lock+0x7d/0xd0
[   34.525070]  ? _raw_spin_lock_bh+0xd0/0xd0
[   34.525563]  ? kvm_guest_apic_eoi_write+0x6b/0x80
[   34.526130]  ? apic_ack_irq+0x9e/0xe0
[   34.526567]  __do_softirq+0x188/0x4b5
[   34.527015]  irq_exit+0x151/0x180
[   34.527417]  do_IRQ+0xdb/0x150
[   34.527783]  common_interrupt+0xf/0xf
[   34.528223]  </IRQ>

This patch makes sure that skb->prev is set to NULL when entering
netem_enqueue.

Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: 68d2f84a ("net: gro: properly remove skb from list")
Suggested-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NChristoph Paasch <cpaasch@apple.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d2a36971ef595069b7a600d1144c2e0881a930a1 ]

Currently __set_phy_supported allows to add modes w/o checking whether
the PHY supports them. This is wrong, it should never add modes but
only remove modes we don't want to support.

The commit marked as fixed didn't do anything wrong, it just copied
existing functionality to the helper which is being fixed now.

Fixes: f3a6bd39 ("phylib: Add phy_set_max_speed helper")
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 24be19e47779d604d1492c114459dca9a92acf78 ]

NIC driver minimal MTU size shall be set to ETH_MIN_MTU, as defined in
the RFC791 and in the network stack. Remove old mlx4_en only define for
it, which was set to wrong value.

Fixes: b80f71f5 ("ethernet/mellanox: use core min/max MTU checking")
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit bd5122cd1e0644d8bd8dd84517c932773e999766 ]

rx_ppp and tx_ppp can be set between 0 and 255, so don't clamp to 1.

Fixes: 6e8814ce ("net/mlx4_en: Fix mixed PFC and Global pause user control requests")
Signed-off-by: NTarick Bedeir <tarick@google.com>
Reviewed-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a5d4a89245ead1f37ed135213653c5beebea4237 ]

When changing mtu many times with traffic, a bug is triggered:

[ 1035.684037] kernel BUG at lib/dynamic_queue_limits.c:26!
[ 1035.684042] invalid opcode: 0000 [#1] SMP
[ 1035.684049] Modules linked in: loop binfmt_misc 8139cp(OE) macsec
tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag tcp_lp
fuse uinput xt_CHECKSUM iptable_mangle ipt_MASQUERADE
nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4
nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun
bridge stp llc ebtable_filter ebtables ip6table_filter devlink
ip6_tables iptable_filter sunrpc snd_hda_codec_generic snd_hda_intel
snd_hda_codec snd_hda_core snd_hwdep ppdev snd_seq iosf_mbi crc32_pclmul
parport_pc snd_seq_device ghash_clmulni_intel parport snd_pcm
aesni_intel joydev lrw snd_timer virtio_balloon sg gf128mul glue_helper
ablk_helper cryptd snd soundcore i2c_piix4 pcspkr ip_tables xfs
libcrc32c sr_mod sd_mod cdrom crc_t10dif crct10dif_generic ata_generic
[ 1035.684102]  pata_acpi virtio_console qxl drm_kms_helper syscopyarea
sysfillrect sysimgblt floppy fb_sys_fops crct10dif_pclmul
crct10dif_common ttm crc32c_intel serio_raw ata_piix drm libata 8139too
virtio_pci drm_panel_orientation_quirks virtio_ring virtio mii dm_mirror
dm_region_hash dm_log dm_mod [last unloaded: 8139cp]
[ 1035.684132] CPU: 9 PID: 25140 Comm: if-mtu-change Kdump: loaded
Tainted: G           OE  ------------ T 3.10.0-957.el7.x86_64 #1
[ 1035.684134] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 1035.684136] task: ffff8f59b1f5a080 ti: ffff8f5a2e32c000 task.ti:
ffff8f5a2e32c000
[ 1035.684149] RIP: 0010:[<ffffffffba3a40d0>]  [<ffffffffba3a40d0>]
dql_completed+0x180/0x190
[ 1035.684162] RSP: 0000:ffff8f5a75483e50  EFLAGS: 00010093
[ 1035.684162] RAX: 00000000000000c2 RBX: ffff8f5a6f91c000 RCX:
0000000000000000
[ 1035.684162] RDX: 0000000000000000 RSI: 0000000000000184 RDI:
ffff8f599fea3ec0
[ 1035.684162] RBP: ffff8f5a75483ea8 R08: 00000000000000c2 R09:
0000000000000000
[ 1035.684162] R10: 00000000000616ef R11: ffff8f5a75483b56 R12:
ffff8f599fea3e00
[ 1035.684162] R13: 0000000000000001 R14: 0000000000000000 R15:
0000000000000184
[ 1035.684162] FS:  00007fa8434de740(0000) GS:ffff8f5a75480000(0000)
knlGS:0000000000000000
[ 1035.684162] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1035.684162] CR2: 00000000004305d0 CR3: 000000024eb66000 CR4:
00000000001406e0
[ 1035.684162] Call Trace:
[ 1035.684162]  <IRQ>
[ 1035.684162]  [<ffffffffc08cbaf8>] ? cp_interrupt+0x478/0x580 [8139cp]
[ 1035.684162]  [<ffffffffba14a294>]
__handle_irq_event_percpu+0x44/0x1c0
[ 1035.684162]  [<ffffffffba14a442>] handle_irq_event_percpu+0x32/0x80
[ 1035.684162]  [<ffffffffba14a4cc>] handle_irq_event+0x3c/0x60
[ 1035.684162]  [<ffffffffba14db29>] handle_fasteoi_irq+0x59/0x110
[ 1035.684162]  [<ffffffffba02e554>] handle_irq+0xe4/0x1a0
[ 1035.684162]  [<ffffffffba7795dd>] do_IRQ+0x4d/0xf0
[ 1035.684162]  [<ffffffffba76b362>] common_interrupt+0x162/0x162
[ 1035.684162]  <EOI>
[ 1035.684162]  [<ffffffffba0c2ae4>] ? __wake_up_bit+0x24/0x70
[ 1035.684162]  [<ffffffffba1e46f5>] ? do_set_pte+0xd5/0x120
[ 1035.684162]  [<ffffffffba1b64fb>] unlock_page+0x2b/0x30
[ 1035.684162]  [<ffffffffba1e4879>] do_read_fault.isra.61+0x139/0x1b0
[ 1035.684162]  [<ffffffffba1e9134>] handle_pte_fault+0x2f4/0xd10
[ 1035.684162]  [<ffffffffba1ebc6d>] handle_mm_fault+0x39d/0x9b0
[ 1035.684162]  [<ffffffffba76f5e3>] __do_page_fault+0x203/0x500
[ 1035.684162]  [<ffffffffba76f9c6>] trace_do_page_fault+0x56/0x150
[ 1035.684162]  [<ffffffffba76ef42>] do_async_page_fault+0x22/0xf0
[ 1035.684162]  [<ffffffffba76b788>] async_page_fault+0x28/0x30
[ 1035.684162] Code: 54 c7 47 54 ff ff ff ff 44 0f 49 ce 48 8b 35 48 2f
9c 00 48 89 77 58 e9 fe fe ff ff 0f 1f 80 00 00 00 00 41 89 d1 e9 ef fe
ff ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 55 8d 42 ff 48
[ 1035.684162] RIP  [<ffffffffba3a40d0>] dql_completed+0x180/0x190
[ 1035.684162]  RSP <ffff8f5a75483e50>

It's not the same as in 7fe0ee09 patch described.
As 8139cp uses shared irq mode, other device irq will trigger
cp_interrupt to execute.

cp_change_mtu
 -> cp_close
 -> cp_open

In cp_close routine  just before free_irq(), some interrupt may occur.
In my environment, cp_interrupt exectutes and IntrStatus is 0x4,
exactly TxOk. That will cause cp_tx to wake device queue.

As device queue is started, cp_start_xmit and cp_open will run at same
time which will cause kernel BUG.

For example:
[#] for tx descriptor

At start:

[#][#][#]
num_queued=3

After cp_init_hw->cp_start_hw->netdev_reset_queue:

[#][#][#]
num_queued=0

When 8139cp starts to work then cp_tx will check
num_queued mismatchs the complete_bytes.

The patch will check IntrMask before check IntrStatus in cp_interrupt.
When 8139cp interrupt is disabled, just return.
Signed-off-by: NSu Yanjun <suyj.fnst@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 1b4e5ad5d6b9f15cd0b5121f86d4719165958417 ]

In 'seg6_output', stack variable 'struct flowi6 fl6' was missing
initialization.

Fixes: 6c8702c6 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: NShmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e6ac64d4c4d095085d7dd71cbd05704ac99829b2 ]

While skb_push() makes the kernel panic if the skb headroom is less than
the unaligned hardware header size, it will proceed normally in case we
copy more than that because of alignment, and we'll silently corrupt
adjacent slabs.

In the case fixed by the previous patch,
"ipv6: Check available headroom in ip6_xmit() even without options", we
end up in neigh_hh_output() with 14 bytes headroom, 14 bytes hardware
header and write 16 bytes, starting 2 bytes before the allocated buffer.

Always check we're not writing before skb->head and, if the headroom is
not enough, warn and drop the packet.

v2:
 - instead of panicking with BUG_ON(), WARN_ON_ONCE() and drop the packet
   (Eric Dumazet)
 - if we avoid the panic, though, we need to explicitly check the headroom
   before the memcpy(), otherwise we'll have corrupted slabs on a running
   kernel, after we warn
 - use __skb_push() instead of skb_push(), as the headroom check is
   already implemented here explicitly (Eric Dumazet)
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 66033f47ca60294a95fc85ec3a3cc909dab7b765 ]

Even if we send an IPv6 packet without options, MAX_HEADER might not be
enough to account for the additional headroom required by alignment of
hardware headers.

On a configuration without HYPERV_NET, WLAN, AX25, and with IPV6_TUNNEL,
sending short SCTP packets over IPv4 over L2TP over IPv6, we start with
100 bytes of allocated headroom in sctp_packet_transmit(), end up with 54
bytes after l2tp_xmit_skb(), and 14 bytes in ip6_finish_output2().

Those would be enough to append our 14 bytes header, but we're going to
align that to 16 bytes, and write 2 bytes out of the allocated slab in
neigh_hh_output().

KASan says:

[  264.967848] ==================================================================
[  264.967861] BUG: KASAN: slab-out-of-bounds in ip6_finish_output2+0x1aec/0x1c70
[  264.967866] Write of size 16 at addr 000000006af1c7fe by task netperf/6201
[  264.967870]
[  264.967876] CPU: 0 PID: 6201 Comm: netperf Not tainted 4.20.0-rc4+ #1
[  264.967881] Hardware name: IBM 2827 H43 400 (z/VM 6.4.0)
[  264.967887] Call Trace:
[  264.967896] ([<00000000001347d6>] show_stack+0x56/0xa0)
[  264.967903]  [<00000000017e379c>] dump_stack+0x23c/0x290
[  264.967912]  [<00000000007bc594>] print_address_description+0xf4/0x290
[  264.967919]  [<00000000007bc8fc>] kasan_report+0x13c/0x240
[  264.967927]  [<000000000162f5e4>] ip6_finish_output2+0x1aec/0x1c70
[  264.967935]  [<000000000163f890>] ip6_finish_output+0x430/0x7f0
[  264.967943]  [<000000000163fe44>] ip6_output+0x1f4/0x580
[  264.967953]  [<000000000163882a>] ip6_xmit+0xfea/0x1ce8
[  264.967963]  [<00000000017396e2>] inet6_csk_xmit+0x282/0x3f8
[  264.968033]  [<000003ff805fb0ba>] l2tp_xmit_skb+0xe02/0x13e0 [l2tp_core]
[  264.968037]  [<000003ff80631192>] l2tp_eth_dev_xmit+0xda/0x150 [l2tp_eth]
[  264.968041]  [<0000000001220020>] dev_hard_start_xmit+0x268/0x928
[  264.968069]  [<0000000001330e8e>] sch_direct_xmit+0x7ae/0x1350
[  264.968071]  [<000000000122359c>] __dev_queue_xmit+0x2b7c/0x3478
[  264.968075]  [<00000000013d2862>] ip_finish_output2+0xce2/0x11a0
[  264.968078]  [<00000000013d9b14>] ip_finish_output+0x56c/0x8c8
[  264.968081]  [<00000000013ddd1e>] ip_output+0x226/0x4c0
[  264.968083]  [<00000000013dbd6c>] __ip_queue_xmit+0x894/0x1938
[  264.968100]  [<000003ff80bc3a5c>] sctp_packet_transmit+0x29d4/0x3648 [sctp]
[  264.968116]  [<000003ff80b7bf68>] sctp_outq_flush_ctrl.constprop.5+0x8d0/0xe50 [sctp]
[  264.968131]  [<000003ff80b7c716>] sctp_outq_flush+0x22e/0x7d8 [sctp]
[  264.968146]  [<000003ff80b35c68>] sctp_cmd_interpreter.isra.16+0x530/0x6800 [sctp]
[  264.968161]  [<000003ff80b3410a>] sctp_do_sm+0x222/0x648 [sctp]
[  264.968177]  [<000003ff80bbddac>] sctp_primitive_ASSOCIATE+0xbc/0xf8 [sctp]
[  264.968192]  [<000003ff80b93328>] __sctp_connect+0x830/0xc20 [sctp]
[  264.968208]  [<000003ff80bb11ce>] sctp_inet_connect+0x2e6/0x378 [sctp]
[  264.968212]  [<0000000001197942>] __sys_connect+0x21a/0x450
[  264.968215]  [<000000000119aff8>] sys_socketcall+0x3d0/0xb08
[  264.968218]  [<000000000184ea7a>] system_call+0x2a2/0x2c0

[...]

Just like ip_finish_output2() does for IPv4, check that we have enough
headroom in ip6_xmit(), and reallocate it if we don't.

This issue is older than git history.
Reported-by: NJianlin Shi <jishi@redhat.com>
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ebaf39e6032faf77218220707fc3fa22487784e0 ]

The *_frag_reasm() functions are susceptible to miscalculating the byte
count of packet fragments in case the truesize of a head buffer changes.
The truesize member may be changed by the call to skb_unclone(), leaving
the fragment memory limit counter unbalanced even if all fragments are
processed. This miscalculation goes unnoticed as long as the network
namespace which holds the counter is not destroyed.

Should an attempt be made to destroy a network namespace that holds an
unbalanced fragment memory limit counter the cleanup of the namespace
never finishes. The thread handling the cleanup gets stuck in
inet_frags_exit_net() waiting for the percpu counter to reach zero. The
thread is usually in running state with a stacktrace similar to:

 PID: 1073   TASK: ffff880626711440  CPU: 1   COMMAND: "kworker/u48:4"
  #5 [ffff880621563d48] _raw_spin_lock at ffffffff815f5480
  #6 [ffff880621563d48] inet_evict_bucket at ffffffff8158020b
  #7 [ffff880621563d80] inet_frags_exit_net at ffffffff8158051c
  #8 [ffff880621563db0] ops_exit_list at ffffffff814f5856
  #9 [ffff880621563dd8] cleanup_net at ffffffff814f67c0
 #10 [ffff880621563e38] process_one_work at ffffffff81096f14

It is not possible to create new network namespaces, and processes
that call unshare() end up being stuck in uninterruptible sleep state
waiting to acquire the net_mutex.

The bug was observed in the IPv6 netfilter code by Per Sundstrom.
I thank him for his analysis of the problem. The parts of this patch
that apply to IPv4 and IPv6 fragment reassembly are preemptive measures.
Signed-off-by: NJiri Wiesner <jwiesner@suse.com>
Reported-by: NPer Sundstrom <per.sundstrom@redqube.se>
Acked-by: NPeter Oskolkov <posk@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 868613f1c0ccf7b832f38b48b18cca31cdeb3d26 upstream.

SNES RetroPort and RetroPad register only 4 gamepad buttons
when they should register all 8 buttons. This is described here:

https://ask.fedoraproject.org/en/question/128102

This is happening because of:

Commit 190d7f02 ("HID: input: do not increment usages when
    duplicate is found")

Here, I add the quirk HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE
(created for backward compatibility with the change in 190d7f02)
for the two products.

Tested with both RetroPort and RetroPad.

Cc: stable@vger.kernel.org  # v4.18+
Signed-off-by: NNic Soudée <nsoudee@gmail.com>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 990d71846a0b7281bd933c34d734e6afc7408e7e upstream.

NullFunc packets should never be duplicate just like
QoS-NullFunc packets.

We saw a client that enters / exits power save with
NullFunc frames (and not with QoS-NullFunc) despite the
fact that the association supports HT.
This specific client also re-uses a non-zero sequence number
for different NullFunc frames.
At some point, the client had to send a retransmission of
the NullFunc frame and we dropped it, leading to a
misalignment in the power save state.
Fix this by never consider a NullFunc frame as duplicate,
just like we do for QoS NullFunc frames.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201449

CC: <stable@vger.kernel.org>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9ec1190d065998650fd9260dea8cf3e1f56c0e8c upstream.

If the buffered broadcast queue contains packets, letting new packets bypass
that queue can lead to heavy reordering, since the driver is probably throttling
transmission of buffered multicast packets after beacons.

Keep buffering packets until the buffer has been cleared (and no client
is in powersave mode).

Cc: stable@vger.kernel.org
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a317e65face482371de30246b6494feb093ff7f9 upstream.

Make it behave like regular ieee80211_tx_status calls, except for the lack of
filtered frame processing.
This fixes spurious low-ack triggered disconnections with powersave clients
connected to an AP.

Fixes: f027c2ac ("mac80211: add ieee80211_tx_status_noskb")
Cc: stable@vger.kernel.org
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5c21e8100dfd57c806e833ae905e26efbb87840f upstream.

This fixes stale beacon-int values that would keep a netdev
from going up.

To reproduce:

Create two VAP on one radio.
vap1 has beacon-int 100, start it.
vap2 has beacon-int 240, start it (and it will fail
  because beacon-int mismatch).
reconfigure vap2 to have beacon-int 100 and start it.
  It will fail because the stale beacon-int 240 will be used
  in the ifup path and hostapd never gets a chance to set the
  new beacon interval.

Cc: stable@vger.kernel.org
Signed-off-by: NBen Greear <greearb@candelatech.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c752cac9db1b0c469db7ba9d17af4ba708984db5 upstream.

cfg80211_sta_opmode_change_notify needs a gfp_t flag to hint the nl80211
stack when allocating new skb, but it is called under tasklet context
here with GFP_KERNEL and kernel will yield a warning about it.

Cc: stable@vger.kernel.org
Fixes: ff84e7bf ("mac80211: Add support to notify ht/vht opmode modification.")
Signed-off-by: NYan-Hsuan Chuang <yhchuang@realtek.com>
ACKed-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a1881c9b8a1edef0a5ae1d5c1b61406fe3402114 upstream.

Otherwise if network manager starts configuring Wi-Fi interface
immidiatelly after getting notification of its creation, we will get
NULL pointer dereference:

  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: [<ffffffff95ae94c8>] hrtimer_active+0x28/0x50
  ...
  Call Trace:
   [<ffffffff95ae9997>] ? hrtimer_try_to_cancel+0x27/0x110
   [<ffffffff95ae9a95>] ? hrtimer_cancel+0x15/0x20
   [<ffffffffc0803bf0>] ? mac80211_hwsim_config+0x140/0x1c0 [mac80211_hwsim]

Cc: stable@vger.kernel.org
Signed-off-by: NVasyl Vavrychuk <vasyl.vavrychuk@globallogic.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 312ca38ddda64bac6513ec68e0ac3789b4eb44dc upstream.

This function was modified to support the information element extension
case (WLAN_EID_EXTENSION) in a manner that would result in an infinite
loop when going through set of IEs that include WLAN_EID_RIC_DATA and
contain an IE that is in the after_ric array. The only place where this
can currently happen is in mac80211 ieee80211_send_assoc() where
ieee80211_ie_split_ric() is called with after_ric[].

This can be triggered by valid data from user space nl80211
association/connect request (i.e., requiring GENL_UNS_ADMIN_PERM). The
only known application having an option to include WLAN_EID_RIC_DATA in
these requests is wpa_supplicant and it had a bug that prevented this
specific contents from being used (and because of that, not triggering
this kernel bug in an automated test case ap_ft_ric) and now that this
bug is fixed, it has a workaround to avoid this kernel issue.
WLAN_EID_RIC_DATA is currently used only for testing purposes, so this
does not cause significant harm for production use cases.

Fixes: 2512b1b1 ("mac80211: extend ieee80211_ie_split to support EXTENSION")
Cc: stable@vger.kernel.org
Signed-off-by: NJouni Malinen <jouni@codeaurora.org>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ae86cbfef3818300f1972e52f67a93211acb0e24 upstream.

Commit cfe30b87 "libnvdimm, pmem: adjust for section collisions with
'System RAM'" enabled Linux to workaround occasions where platform
firmware arranges for "System RAM" and "Persistent Memory" to collide
within a single section boundary. Unfortunately, as reported in this
issue [1], platform firmware can inflict the same collision between
persistent memory regions.

The approach of interrogating iomem_resource does not work in this
case because platform firmware may merge multiple regions into a single
iomem_resource range. Instead provide a method to interrogate regions
that share the same parent bus.

This is a stop-gap until the core-MM can grow support for hotplug on
sub-section boundaries.

[1]: https://github.com/pmem/ndctl/issues/76

Fixes: cfe30b87 ("libnvdimm, pmem: adjust for section collisions with...")
Cc: <stable@vger.kernel.org>
Reported-by: NPatrick Geary <patrickg@supermicro.com>
Tested-by: NPatrick Geary <patrickg@supermicro.com>
Reviewed-by: NVishal Verma <vishal.l.verma@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dada6a43b0402eba438a17ac86fdc64ac56a4607 upstream.

This patch is trying to fix KE issue due to
"BUG: KASAN: global-out-of-bounds in param_set_kgdboc_var+0x194/0x198"
reported by Syzkaller scan."

[26364:syz-executor0][name:report8t]BUG: KASAN: global-out-of-bounds in param_set_kgdboc_var+0x194/0x198
[26364:syz-executor0][name:report&]Read of size 1 at addr ffffff900e44f95f by task syz-executor0/26364
[26364:syz-executor0][name:report&]
[26364:syz-executor0]CPU: 7 PID: 26364 Comm: syz-executor0 Tainted: G W 0
[26364:syz-executor0]Call trace:
[26364:syz-executor0][<ffffff9008095cf8>] dump_bacIctrace+Ox0/0x470
[26364:syz-executor0][<ffffff9008096de0>] show_stack+0x20/0x30
[26364:syz-executor0][<ffffff90089cc9c8>] dump_stack+Oxd8/0x128
[26364:syz-executor0][<ffffff90084edb38>] print_address_description +0x80/0x4a8
[26364:syz-executor0][<ffffff90084ee270>] kasan_report+Ox178/0x390
[26364:syz-executor0][<ffffff90084ee4a0>] _asan_report_loadi_noabort+Ox18/0x20
[26364:syz-executor0][<ffffff9008b092ac>] param_set_kgdboc_var+Ox194/0x198
[26364:syz-executor0][<ffffff900813af64>] param_attr_store+Ox14c/0x270
[26364:syz-executor0][<ffffff90081394c8>] module_attr_store+0x60/0x90
[26364:syz-executor0][<ffffff90086690c0>] sysfs_kl_write+Ox100/0x158
[26364:syz-executor0][<ffffff9008666d84>] kernfs_fop_write+0x27c/0x3a8
[26364:syz-executor0][<ffffff9008508264>] do_loop_readv_writev+0x114/0x1b0
[26364:syz-executor0][<ffffff9008509ac8>] do_readv_writev+0x4f8/0x5e0
[26364:syz-executor0][<ffffff9008509ce4>] vfs_writev+0x7c/Oxb8
[26364:syz-executor0][<ffffff900850ba64>] SyS_writev+Oxcc/0x208
[26364:syz-executor0][<ffffff90080883f0>] elO_svc_naked +0x24/0x28
[26364:syz-executor0][name:report&]
[26364:syz-executor0][name:report&]The buggy address belongs to the variable:
[26364:syz-executor0][name:report&] kgdb_tty_line+Ox3f/0x40
[26364:syz-executor0][name:report&]
[26364:syz-executor0][name:report&]Memory state around the buggy address:
[26364:syz-executor0] ffffff900e44f800: 00 00 00 00 00 04 fa fa fa fa fa fa 00 fa fa fa
[26364:syz-executor0] ffffff900e44f880: fa fa fa fa 00 fa fa fa fa fa fa fa 00 fa fa fa
[26364:syz-executor0]> ffffff900e44f900: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00
[26364:syz-executor0][name:report&]                                       ^
[26364:syz-executor0] ffffff900e44f980: 00 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa
[26364:syz-executor0] ffffff900e44fa00: 04 fa fa fa fa fa fa fa 00 fa fa fa fa fa fa fa
[26364:syz-executor0][name:report&]
[26364:syz-executor0][name:panic&]Disabling lock debugging due to kernel taint
[26364:syz-executor0]------------[cut here]------------

After checking the source code, we've found there might be an out-of-bounds
access to "config[len - 1]" array when the variable "len" is zero.
Signed-off-by: NMacpaul Lin <macpaul@gmail.com>
Acked-by: NDaniel Thompson <daniel.thompson@linaro.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 06fd9ab12b804451b14d538adbf98a57c2d6846b upstream.

Fix activation helper which would return -ETIMEDOUT even if the last
retry attempt was successful.

Also change the semantics of the retries variable so that it actually
holds the number of retries (rather than tries).

Fixes: d2efbbd1 ("gnss: add driver for sirfstar-based receivers")
Cc: stable <stable@vger.kernel.org>	# 4.19
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2a48602615e0a2f563549c7d5c8d507f904cf96e upstream.

Since Commit 761ed4a9 ('tty: serial_core: convert uart_close to use
tty_port_close') and Commit 4dda864d ('tty: serial_core: Fix serial
console crash on port shutdown), a serial port which is used as
console can be stuck when logging out if there is a remained process.
After logged out, agetty will try to grab the serial port but it will
be failed because the previous process did not release the port
correctly. To fix this, TTY_IO_ERROR bit should not be enabled of
tty_port_close if the port is console port.

Reproduce step:
- Run background processes from serial console
$ while true; do sleep 10; done &

- Log out
$ logout
-> Stuck

- Read journal log by journalctl | tail
Jan 28 16:07:01 ubuntu systemd[1]: Stopped Serial Getty on ttyAMA0.
Jan 28 16:07:01 ubuntu systemd[1]: Started Serial Getty on ttyAMA0.
Jan 28 16:07:02 ubuntu agetty[1643]: /dev/ttyAMA0: not a tty

Fixes: 761ed4a9 ("tty: serial_core: convert uart_close to use tty_port_close")
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Rob Herring <robh@kernel.org>
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: NChanho Park <parkch98@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 100bc3e2bebf95506da57cbdf5f26b25f6da4c81 upstream.

serial8250_register_8250_port calls uart_config_port, which calls
config_port on the port before it tries to power on the port. So we need
the port to be on before calling serial8250_register_8250_port. Change
the code to always do a runtime resume in probe before registering port,
and always do a runtime suspend in remove.

This basically reverts the change in commit 68e5fc4a ("tty: serial:
8250_mtk: use pm_runtime callbacks for enabling"), but still use
pm_runtime callbacks.

Fixes: 68e5fc4a ("tty: serial: 8250_mtk: use pm_runtime callbacks for enabling")
Signed-off-by: NPeter Shih <pihsun@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 37c2578c0c40e286bc0d30bdc05290b2058cf66e upstream.

vmbus_process_offer() mustn't call channel->sc_creation_callback()
directly for sub-channels, because sc_creation_callback() ->
vmbus_open() may never get the host's response to the
OPEN_CHANNEL message (the host may rescind a channel at any time,
e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind()
may not wake up the vmbus_open() as it's blocked due to a non-zero
vmbus_connection.offer_in_progress, and finally we have a deadlock.

The above is also true for primary channels, if the related device
drivers use sync probing mode by default.

And, usually the handling of primary channels and sub-channels can
depend on each other, so we should offload them to different
workqueues to avoid possible deadlock, e.g. in sync-probing mode,
NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() ->
rtnl_lock(), and causes deadlock: the former gets the rtnl_lock
and waits for all the sub-channels to appear, but the latter
can't get the rtnl_lock and this blocks the handling of sub-channels.

The patch can fix the multiple-NIC deadlock described above for
v3.x kernels (e.g. RHEL 7.x) which don't support async-probing
of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing
but don't enable async-probing for Hyper-V drivers (yet).

The patch can also fix the hang issue in sub-channel's handling described
above for all versions of kernels, including v4.19 and v4.20-rc4.

So actually the patch should be applied to all the existing kernels,
not only the kernels that have 8195b139.

Fixes: 8195b139 ("hv_netvsc: fix deadlock on hotplug")
Cc: stable@vger.kernel.org
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDexuan Cui <decui@microsoft.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b84a64fad40637b1c9fa4f4dbf847a23e29e672b upstream.

The following commit:

  d6493401 ("x86/efi: Use efi_exit_boot_services()")

introduced a regression on systems with large memory maps causing them
to hang on boot. The first "goto get_map" that was removed from
exit_boot() ensured there was enough room for the memory map when
efi_call_early(exit_boot_services) was called. This happens when
(nr_desc > ARRAY_SIZE(params->e820_table).

Chain of events:

  exit_boot()
    efi_exit_boot_services()
      efi_get_memory_map                  <- at this point the mm can't grow over 8 desc
      priv_func()
        exit_boot_func()
          allocate_e820ext()              <- new mm grows over 8 desc from e820 alloc
      efi_call_early(exit_boot_services)  <- mm key doesn't match so retry
      efi_call_early(get_memory_map)      <- not enough room for new mm
      system hangs

This patch allocates the e820 buffer before calling efi_exit_boot_services()
and fixes the regression.

 [ mingo: minor cleanliness edits. ]
Signed-off-by: NEric Snowberg <eric.snowberg@oracle.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: YiFei Zhu <zhuyifei1999@gmail.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181129171230.18699-2-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

kprobes/x86: Fix instruction patching corruption when copying more than one RIP-relative instruction

commit 43a1b0cb4cd6dbfd3cd9c10da663368394d299d8 upstream.

After copy_optimized_instructions() copies several instructions
to the working buffer it tries to fix up the real RIP address, but it
adjusts the RIP-relative instruction with an incorrect RIP address
for the 2nd and subsequent instructions due to a bug in the logic.

This will break the kernel pretty badly (with likely outcomes such as
a kernel freeze, a crash, or worse) because probed instructions can refer
to the wrong data.

For example putting kprobes on cpumask_next() typically hits this bug.

cpumask_next() is normally like below if CONFIG_CPUMASK_OFFSTACK=y
(in this case nr_cpumask_bits is an alias of nr_cpu_ids):

 <cpumask_next>:
	48 89 f0		mov    %rsi,%rax
	8b 35 7b fb e2 00	mov    0xe2fb7b(%rip),%esi # ffffffff82db9e64 <nr_cpu_ids>
	55			push   %rbp
...

If we put a kprobe on it and it gets jump-optimized, it gets
patched by the kprobes code like this:

 <cpumask_next>:
	e9 95 7d 07 1e		jmpq   0xffffffffa000207a
	7b fb			jnp    0xffffffff81f8a2e2 <cpumask_next+2>
	e2 00			loop   0xffffffff81f8a2e9 <cpumask_next+9>
	55			push   %rbp

This shows that the first two MOV instructions were copied to a
trampoline buffer at 0xffffffffa000207a.

Here is the disassembled result of the trampoline, skipping
the optprobe template instructions:

	# Dump of assembly code from 0xffffffffa000207a to 0xffffffffa00020ea:

	54			push   %rsp
	...
	48 83 c4 08		add    $0x8,%rsp
	9d			popfq
	48 89 f0		mov    %rsi,%rax
	8b 35 82 7d db e2	mov    -0x1d24827e(%rip),%esi # 0xffffffff82db9e67 <nr_cpu_ids+3>

This dump shows that the second MOV accesses *(nr_cpu_ids+3) instead of
the original *nr_cpu_ids. This leads to a kernel freeze because
cpumask_next() always returns 0 and for_each_cpu() never ends.

Fix this by adding 'len' correctly to the real RIP address while
copying.

[ mingo: Improved the changelog. ]
Reported-by: NMichael Rodin <michael@rodin.online>
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org # v4.15+
Fixes: 63fef14f ("kprobes/x86: Make insn buffer always ROX and use text_poke()")
Link: http://lkml.kernel.org/r/153504457253.22602.1314289671019919596.stgit@devboxSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 86c1c87d0e6241cbe35bd52badfc84b154e1b959 upstream.

According to intel_read_wm_latency() it is perfectly legal for one WM
and all subsequent levels to be 0 (and the deeper powersaving states
disabled), so don't shout *ERROR*, over and over again.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Acked-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180726161527.10516-1-chris@chris-wilson.co.ukSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>