commit 353c0956a618a07ba4bbe7ad00ff29fe70e8412a upstream.

Bugzilla: 1671930

Emulation of certain instructions (VMXON, VMCLEAR, VMPTRLD, VMWRITE with
memory operand, INVEPT, INVVPID) can incorrectly inject a page fault
when passed an operand that points to an MMIO address.  The page fault
will use uninitialized kernel stack memory as the CR2 and error code.

The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR
exit to userspace; however, it is not an easy fix, so for now just
ensure that the error code and CR2 are zero.

Embargoed until Feb 7th 2019.
Reported-by: NFelix Wilhelm <fwilhelm@google.com>
Cc: stable@kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 42caa0edabd6a0a392ec36a5f0943924e4954311 upstream.

The aic94xx driver is currently failing to load with errors like

sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/0000:02:00.3/0000:07:02.0/revision'

Because the PCI code had recently added a file named 'revision' to every
PCI device.  Fix this by renaming the aic94xx revision file to
aic_revision.  This is safe to do for us because as far as I can tell,
there's nothing in userspace relying on the current aic94xx revision file
so it can be renamed without breaking anything.

Fixes: 702ed3be (PCI: Create revision file in sysfs)
Cc: stable@vger.kernel.org
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bb61b843ffd46978d7ca5095453e572714934eeb upstream.

Presently when an error is encountered during probe of the cxlflash
adapter, a deadlock is seen with cpu thread stuck inside
cxlflash_remove(). Below is the trace of the deadlock as logged by
khungtaskd:

cxlflash 0006:00:00.0: cxlflash_probe: init_afu failed rc=-16
INFO: task kworker/80:1:890 blocked for more than 120 seconds.
       Not tainted 5.0.0-rc4-capi2-kexec+ #2
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/80:1    D    0   890      2 0x00000808
Workqueue: events work_for_cpu_fn

Call Trace:
 0x4d72136320 (unreliable)
 __switch_to+0x2cc/0x460
 __schedule+0x2bc/0xac0
 schedule+0x40/0xb0
 cxlflash_remove+0xec/0x640 [cxlflash]
 cxlflash_probe+0x370/0x8f0 [cxlflash]
 local_pci_probe+0x6c/0x140
 work_for_cpu_fn+0x38/0x60
 process_one_work+0x260/0x530
 worker_thread+0x280/0x5d0
 kthread+0x1a8/0x1b0
 ret_from_kernel_thread+0x5c/0x80
INFO: task systemd-udevd:5160 blocked for more than 120 seconds.

The deadlock occurs as cxlflash_remove() is called from cxlflash_probe()
without setting 'cxlflash_cfg->state' to STATE_PROBED and the probe thread
starts to wait on 'cxlflash_cfg->reset_waitq'. Since the device was never
successfully probed the 'cxlflash_cfg->state' never changes from
STATE_PROBING hence the deadlock occurs.

We fix this deadlock by setting the variable 'cxlflash_cfg->state' to
STATE_PROBED in case an error occurs during cxlflash_probe() and just
before calling cxlflash_remove().

Cc: stable@vger.kernel.org
Fixes: c21e0bbf("cxlflash: Base support for IBM CXL Flash Adapter")
Signed-off-by: NVaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a1960e0f1639cb1f7a3d94521760fc73091f6640 upstream.

The send_xchar() and tiocmset() tty operations are optional. Add the
missing sanity checks to prevent user-space triggerable NULL-pointer
dereferences.

Fixes: 6b9ad1c7 ("staging: speakup: add send_xchar, tiocmset and input functionality for tty")
Cc: stable <stable@vger.kernel.org>     # 4.13
Cc: Okash Khawaja <okash.khawaja@gmail.com>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: NJohan Hovold <johan@kernel.org>
Reviewed-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c418fd6c01fbc5516a2cd1eaf1df1ec86869028a upstream.

Handling short packets (length < max packet size) in the Inventra DMA
engine in the MUSB driver causes the MUSB DMA controller to hang. An
example of a problem that is caused by this problem is when streaming
video out of a UVC gadget, only the first video frame is transferred.

For short packets (mode-0 or mode-1 DMA), MUSB_TXCSR_TXPKTRDY must be
set manually by the driver. This was previously done in musb_g_tx
(musb_gadget.c), but incorrectly (all csr flags were cleared, and only
MUSB_TXCSR_MODE and MUSB_TXCSR_TXPKTRDY were set). Fixing that problem
allows some requests to be transferred correctly, but multiple requests
were often put together in one USB packet, and caused problems if the
packet size was not a multiple of 4. Instead, set MUSB_TXCSR_TXPKTRDY
in dma_controller_irq (musbhsdma.c), just like host mode transfers.

This topic was originally tackled by Nicolas Boichat [0] [1] and is
discussed further at [2] as part of his GSoC project [3].

[0] https://groups.google.com/forum/?hl=en#!topic/beagleboard-gsoc/k8Azwfp75CU
[1] https://gitorious.org/beagleboard-usbsniffer/beagleboard-usbsniffer-kernel/commit/b0be3b6cc195ba732189b04f1d43ec843c3e54c9?p=beagleboard-usbsniffer:beagleboard-usbsniffer-kernel.git;a=patch;h=b0be3b6cc195ba732189b04f1d43ec843c3e54c9
[2] http://beagleboard-usbsniffer.blogspot.com/2010/07/musb-isochronous-transfers-fixed.html
[3] http://elinux.org/BeagleBoard/GSoC/USBSniffer

Fixes: 550a7375 ("USB: Add MUSB and TUSB support")
Signed-off-by: NPaul Elder <paul.elder@ideasonboard.com>
Signed-off-by: NBin Liu <b-liu@ti.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 07c69f1148da7de3978686d3af9263325d9d60bd upstream.

(!x & y) strikes again.

Fix bitwise and boolean operations by enclosing the expression:

	intcsr & (1 << NET2272_PCI_IRQ)

in parentheses, before applying the boolean operator '!'.

Notice that this code has been there since 2011. So, it would
be helpful if someone can double-check this.

This issue was detected with the help of Coccinelle.

Fixes: ceb80363 ("USB: net2272: driver for PLX NET2272 USB device controller")
Cc: stable@vger.kernel.org
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1e19cdc8060227b0802bda6bc0bd22b23679ba32 upstream.

For OUT endpoints, zero-length transfers require MaxPacketSize buffer as
per the DWC_usb3 programming guide 3.30a section 4.2.3.3.

This patch fixes this by explicitly checking zero length
transfer to correctly pad up to MaxPacketSize.

Fixes: c6267a51 ("usb: dwc3: gadget: align transfers to wMaxPacketSize")
Cc: stable@vger.kernel.org
Signed-off-by: NTejas Joglekar <joglekar@synopsys.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a53469a68eb886e84dd8b69a1458a623d3591793 upstream.

power off the phy should be done before populate the phy. Otherwise,
am335x_init() could be called by the phy owner to power on the phy first,
then am335x_phy_probe() turns off the phy again without the caller knowing
it.

Fixes: 2fc711d7 ("usb: phy: am335x: Enable USB remote wakeup using PHY wakeup")
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: NBin Liu <b-liu@ti.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9791ec7df0e7b4d80706ccea8f24b6542f6059e9 upstream.

On systems or VMs where multiple devices share a single DevID
(because they sit behind a PCI bridge, or because the HW is
broken in funky ways), we reuse the save its_device structure
in order to reflect this.

It turns out that there is a distinct lack of locking when looking
up the its_device, and two device being probed concurrently can result
in double allocations. That's obviously not nice.

A solution for this is to have a per-ITS mutex that serializes device
allocation.

A similar issue exists on the freeing side, which can run concurrently
with the allocation. On top of now taking the appropriate lock, we
also make sure that a shared device is never freed, as we have no way
to currently track the life cycle of such object.
Reported-by: NZheng Xiang <zhengxiang9@huawei.com>
Tested-by: NZheng Xiang <zhengxiang9@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1a1fb985f2e2b85ec0d3dc2e519ee48389ec2434 upstream.

commit 56222b21 ("futex: Drop hb->lock before enqueueing on the
rtmutex") changed the locking rules in the futex code so that the hash
bucket lock is not longer held while the waiter is enqueued into the
rtmutex wait list. This made the lock and the unlock path symmetric, but
unfortunately the possible early exit from __rt_mutex_proxy_start() due to
a detected deadlock was not updated accordingly. That allows a concurrent
unlocker to observe inconsitent state which triggers the warning in the
unlock path.

futex_lock_pi()                         futex_unlock_pi()
  lock(hb->lock)
  queue(hb_waiter)				lock(hb->lock)
  lock(rtmutex->wait_lock)
  unlock(hb->lock)
                                        // acquired hb->lock
                                        hb_waiter = futex_top_waiter()
                                        lock(rtmutex->wait_lock)
  __rt_mutex_proxy_start()
     ---> fail
          remove(rtmutex_waiter);
     ---> returns -EDEADLOCK
  unlock(rtmutex->wait_lock)
                                        // acquired wait_lock
                                        wake_futex_pi()
                                        rt_mutex_next_owner()
					  --> returns NULL
                                          --> WARN

  lock(hb->lock)
  unqueue(hb_waiter)

The problem is caused by the remove(rtmutex_waiter) in the failure case of
__rt_mutex_proxy_start() as this lets the unlocker observe a waiter in the
hash bucket but no waiter on the rtmutex, i.e. inconsistent state.

The original commit handles this correctly for the other early return cases
(timeout, signal) by delaying the removal of the rtmutex waiter until the
returning task reacquired the hash bucket lock.

Treat the failure case of __rt_mutex_proxy_start() in the same way and let
the existing cleanup code handle the eventual handover of the rtmutex
gracefully. The regular rt_mutex_proxy_start() gains the rtmutex waiter
removal for the failure case, so that the other callsites are still
operating correctly.

Add proper comments to the code so all these details are fully documented.

Thanks to Peter for helping with the analysis and writing the really
valuable code comments.

Fixes: 56222b21 ("futex: Drop hb->lock before enqueueing on the rtmutex")
Reported-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Co-developed-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: Stefan Liebler <stli@linux.ibm.com>
Cc: Sebastian Sewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1901292311410.1950@nanos.tec.linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 341198eda723c8c1cddbb006a89ad9e362502ea2 upstream.

Once the "ld_queue" list is not empty, next descriptor will migrate
into "ld_active" list. The "desc" variable will be overwritten
during that transition. And later the dmaengine_desc_get_callback_invoke()
will use it as an argument. As result we invoke wrong callback.

That behaviour was in place since:
commit fcaaba6c ("dmaengine: imx-dma: fix callback path in tasklet").
But after commit 4cd13c21 ("softirq: Let ksoftirqd do its job")
things got worse, since possible delay between tasklet_schedule()
from DMA irq handler and actual tasklet function execution got bigger.
And that gave more time for new DMA request to be submitted and
to be put into "ld_queue" list.

It has been noticed that DMA issue is causing problems for "mxc-mmc"
driver. While stressing the system with heavy network traffic and
writing/reading to/from sd card simultaneously the timeout may happen:

10013000.sdhci: mxcmci_watchdog: read time out (status = 0x30004900)

That often lead to file system corruption.
Signed-off-by: NLeonid Iziumtsev <leonid.iziumtsev@gmail.com>
Signed-off-by: NVinod Koul <vkoul@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9e528c799d17a4ac37d788c81440b50377dd592d upstream.

There are multiple issues with bcm2835_dma_abort() (which is called on
termination of a transaction):

* The algorithm to abort the transaction first pauses the channel by
  clearing the ACTIVE flag in the CS register, then waits for the PAUSED
  flag to clear.  Page 49 of the spec documents the latter as follows:

  "Indicates if the DMA is currently paused and not transferring data.
   This will occur if the active bit has been cleared [...]"
   https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf

  So the function is entering an infinite loop because it is waiting for
  PAUSED to clear which is always set due to the function having cleared
  the ACTIVE flag.  The only thing that's saving it from itself is the
  upper bound of 10000 loop iterations.

  The code comment says that the intention is to "wait for any current
  AXI transfer to complete", so the author probably wanted to check the
  WAITING_FOR_OUTSTANDING_WRITES flag instead.  Amend the function
  accordingly.

* The CS register is only read at the beginning of the function.  It
  needs to be read again after pausing the channel and before checking
  for outstanding writes, otherwise writes which were issued between
  the register read at the beginning of the function and pausing the
  channel may not be waited for.

* The function seeks to abort the transfer by writing 0 to the NEXTCONBK
  register and setting the ABORT and ACTIVE flags.  Thereby, the 0 in
  NEXTCONBK is sought to be loaded into the CONBLK_AD register.  However
  experimentation has shown this approach to not work:  The CONBLK_AD
  register remains the same as before and the CS register contains
  0x00000030 (PAUSED | DREQ_STOPS_DMA).  In other words, the control
  block is not aborted but merely paused and it will be resumed once the
  next DMA transaction is started.  That is absolutely not the desired
  behavior.

  A simpler approach is to set the channel's RESET flag instead.  This
  reliably zeroes the NEXTCONBK as well as the CS register.  It requires
  less code and only a single MMIO write.  This is also what popular
  user space DMA drivers do, e.g.:
  https://github.com/metachris/RPIO/blob/master/source/c_pwm/pwm.c

  Note that the spec is contradictory whether the NEXTCONBK register
  is writeable at all.  On the one hand, page 41 claims:

  "The value loaded into the NEXTCONBK register can be overwritten so
  that the linked list of Control Block data structures can be
  dynamically altered. However it is only safe to do this when the DMA
  is paused."

  On the other hand, page 40 specifies:

  "Only three registers in each channel's register set are directly
  writeable (CS, CONBLK_AD and DEBUG). The other registers (TI,
  SOURCE_AD, DEST_AD, TXFR_LEN, STRIDE & NEXTCONBK), are automatically
  loaded from a Control Block data structure held in external memory."

Fixes: 96286b57 ("dmaengine: Add support for BCM2835")
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v3.14+
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Martin Sperl <kernel@martin.sperl.org>
Cc: Florian Meier <florian.meier@koalo.de>
Cc: Clive Messer <clive.m.messer@gmail.com>
Cc: Matthias Reichl <hias@horus.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Acked-by: NFlorian Kauer <florian.kauer@koalo.de>
Signed-off-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f7da7782aba92593f7b82f03d2409a1c5f4db91b upstream.

If IRQ handlers are threaded (either because CONFIG_PREEMPT_RT_BASE is
enabled or "threadirqs" was passed on the command line) and if system
load is sufficiently high that wakeup latency of IRQ threads degrades,
SPI DMA transactions on the BCM2835 occasionally break like this:

ks8851 spi0.0: SPI transfer timed out
bcm2835-dma 3f007000.dma: DMA transfer could not be terminated
ks8851 spi0.0 eth2: ks8851_rdfifo: spi_sync() failed

The root cause is an assumption made by the DMA driver which is
documented in a code comment in bcm2835_dma_terminate_all():

/*
 * Stop DMA activity: we assume the callback will not be called
 * after bcm_dma_abort() returns (even if it does, it will see
 * c->desc is NULL and exit.)
 */

That assumption falls apart if the IRQ handler bcm2835_dma_callback() is
threaded: A client may terminate a descriptor and issue a new one
before the IRQ handler had a chance to run. In fact the IRQ handler may
miss an *arbitrary* number of descriptors. The result is the following
race condition:

1. A descriptor finishes, its interrupt is deferred to the IRQ thread.
2. A client calls dma_terminate_async() which sets channel->desc = NULL.
3. The client issues a new descriptor. Because channel->desc is NULL,
   bcm2835_dma_issue_pending() immediately starts the descriptor.
4. Finally the IRQ thread runs and writes BCM2835_DMA_INT to the CS
   register to acknowledge the interrupt. This clears the ACTIVE flag,
   so the newly issued descriptor is paused in the middle of the
   transaction. Because channel->desc is not NULL, the IRQ thread
   finalizes the descriptor and tries to start the next one.

I see two possible solutions: The first is to call synchronize_irq()
in bcm2835_dma_issue_pending() to wait until the IRQ thread has
finished before issuing a new descriptor. The downside of this approach
is unnecessary latency if clients desire rapidly terminating and
re-issuing descriptors and don't have any use for an IRQ callback.
(The SPI TX DMA channel is a case in point.)

A better alternative is to make the IRQ thread recognize that it has
missed descriptors and avoid finalizing the newly issued descriptor.
So first of all, set the ACTIVE flag when acknowledging the interrupt.
This keeps a newly issued descriptor running.

If the descriptor was finished, the channel remains idle despite the
ACTIVE flag being set. However the ACTIVE flag can then no longer be
used to check whether the channel is idle, so instead check whether
the register containing the current control block address is zero
and finalize the current descriptor only if so.

That way, there is no impact on latency and throughput if the client
doesn't care for the interrupt: Only minimal additional overhead is
introduced for non-cyclic descriptors as one further MMIO read is
necessary per interrupt to check for idleness of the channel. Cyclic
descriptors are sped up slightly by removing one MMIO write per
interrupt.

Fixes: 96286b57 ("dmaengine: Add support for BCM2835")
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v3.14+
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Martin Sperl <kernel@martin.sperl.org>
Cc: Florian Meier <florian.meier@koalo.de>
Cc: Clive Messer <clive.m.messer@gmail.com>
Cc: Matthias Reichl <hias@horus.com>
Tested-by: NStefan Wahren <stefan.wahren@i2se.com>
Acked-by: NFlorian Kauer <florian.kauer@koalo.de>
Signed-off-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 13054abbaa4f1fd4e6f3b4b63439ec033b4c8035 upstream.

Ring buffer implementation in hid_debug_event() and hid_debug_events_read()
is strange allowing lost or corrupted data. After commit 717adfda
("HID: debug: check length before copy_to_user()") it is possible to enter
an infinite loop in hid_debug_events_read() by providing 0 as count, this
locks up a system. Fix this by rewriting the ring buffer implementation
with kfifo and simplify the code.

This fixes CVE-2019-3819.

v2: fix an execution logic and add a comment
v3: use __set_current_state() instead of set_current_state()

Link: https://bugzilla.redhat.com/show_bug.cgi?id=1669187
Cc: stable@vger.kernel.org # v4.18+
Fixes: cd667ce2 ("HID: use debugfs for events/reports dumping")
Fixes: 717adfda ("HID: debug: check length before copy_to_user()")
Signed-off-by: NVladis Dronov <vdronov@redhat.com>
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 97e1532ef81acb31c30f9e75bf00306c33a77812 upstream.

Dereferencing req->page_descs[0] will Oops if req->max_pages is zero.

Reported-by: syzbot+c1e36d30ee3416289cc0@syzkaller.appspotmail.com
Tested-by: syzbot+c1e36d30ee3416289cc0@syzkaller.appspotmail.com
Fixes: b2430d75 ("fuse: add per-page descriptor <offset, length> to fuse_req")
Cc: <stable@vger.kernel.org> # v3.9
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a2ebba824106dabe79937a9f29a875f837e1b6d4 upstream.

NR_WRITEBACK_TEMP is accounted on the temporary page in the request, not
the page cache page.

Fixes: 8b284dc4 ("fuse: writepages: handle same page rewrites")
Cc: <stable@vger.kernel.org> # v3.13
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9509941e9c534920ccc4771ae70bd6cbbe79df1c upstream.

Some of the pipe_buf_release() handlers seem to assume that the pipe is
locked - in particular, anon_pipe_buf_release() accesses pipe->tmp_page
without taking any extra locks. From a glance through the callers of
pipe_buf_release(), it looks like FUSE is the only one that calls
pipe_buf_release() without having the pipe locked.

This bug should only lead to a memory leak, nothing terrible.

Fixes: dd3bb14f ("fuse: support splice() writing to fuse device")
Cc: stable@vger.kernel.org
Signed-off-by: NJann Horn <jannh@google.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 89e3a5682edaa4e5bb334719afb180256ac7bf78 upstream.

On the System76 Darter Pro (darp5), there is a headset microphone
input attached to 0x1a that does not have a jack detect.  In order to
get it working, the pin configuration needs to be set correctly, and
the ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC fixup needs to be applied.
This is similar to the MIC_NO_PRESENCE fixups for some Dell laptops,
except we have a separate microphone jack that is already configured
correctly.
Signed-off-by: NJeremy Soller <jeremy@system76.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 35a39f98567d8d3f1cea48f0f30de1a7e736b644 upstream.

Replace the open-codes in many places with a new common helper for
performing the same thing: referring to the primary headphone pin.

This eventually fixes the potentially missing headphone pin on some
weird devices, too.

Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d561aa0a70bb2e1dd85fde98b6a5561e4175ac3e upstream.

When auto_mute = no or spec->suppress_auto_mute = 1, cfg->hp_pins will
lose value.

Add this patch to find hp_pins value.
I add fixed for ALC282 ALC225 ALC256 ALC294 and alc_default_init()
alc_default_shutup().
Signed-off-by: NKailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 305a0ade180981686eec1f92aa6252a7c6ebb1cf upstream.

In the current code, the codec registration may happen both at the
codec bind time and the end of the controller probe time.  In a rare
occasion, they race with each other, leading to Oops due to the still
uninitialized card device.

This patch introduces a simple flag to prevent the codec registration
at the codec bind time as long as the controller probe is going on.
The controller probe invokes snd_card_register() that does the whole
registration task, and we don't need to register each piece
beforehand.

Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3bff2407fbd28fd55ad5b5cccd98fc0c9598f23b upstream.

This patch adds the T+A VID to the generic check in order to enable
native DSD support for T+A devices. This works with the new T+A USB
DAC model SD3100HV and will also work with future devices which
support the XMOS/Thesycon style DSD format.
Signed-off-by: NUdo Eberhardt <udo.eberhardt@thesycon.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4f2ab5e1d13d6aa77c55f4914659784efd776eb4 upstream.

It is normal user behaviour to start, stop, then start a stream
again without closing it. Currently this works for compressed
playback streams but not capture ones.

The states on a compressed capture stream go directly from OPEN to
PREPARED, unlike a playback stream which moves to SETUP and waits
for a write of data before moving to PREPARED. Currently however,
when a stop is sent the state is set to SETUP for both types of
streams. This leaves a capture stream in the situation where a new
start can't be sent as that requires the state to be PREPARED and
a new set_params can't be sent as that requires the state to be
OPEN. The only option being to close the stream, and then reopen.

Correct this issues by allowing snd_compr_drain_notify to set the
state depending on the stream direction, as we already do in
set_params.

Fixes: 49bb6402 ("ALSA: compress_core: Add support for capture streams")
Signed-off-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit aa6ee4ab69293969867ab09b57546d226ace3d7a upstream.

The cached writeback mapping is EOF trimmed to try and avoid races
between post-eof block management and writeback that result in
sending cached data to a stale location. The cached mapping is
currently trimmed on the validation check, which leaves a race
window between the time the mapping is cached and when it is trimmed
against the current inode size.

For example, if a new mapping is cached by delalloc conversion on a
blocksize == page size fs, we could cycle various locks, perform
memory allocations, etc.  in the writeback codepath before the
associated mapping is eventually trimmed to i_size. This leaves
enough time for a post-eof truncate and file append before the
cached mapping is trimmed. The former event essentially invalidates
a range of the cached mapping and the latter bumps the inode size
such the trim on the next writepage event won't trim all of the
invalid blocks. fstest generic/464 reproduces this scenario
occasionally and causes a lost writeback and stale delalloc blocks
warning on inode inactivation.

To work around this problem, trim the cached writeback mapping as
soon as it is cached in addition to on subsequent validation checks.
This is a minor tweak to tighten the race window as much as possible
until a proper invalidation mechanism is available.

Fixes: 40214d12 ("xfs: trim writepage mapping to within eof")
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NAllison Henderson <allison.henderson@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 82eaa1fa0448da1852d7b80832e67e80a08dcc27 ]

At Innova IPsec TX offload data path a special software parser metadata
is used to pass some packet attributes to the hardware, this metadata
is passed using the Ethernet control segment of a WQE (a HW descriptor)
header.

The cited commit might nullify this header, hence the metadata is lost,
this caused a significant performance drop during hw offloading
operation.

Fix by restoring the metadata at the Ethernet control segment in case
it was nullified.

Fixes: 37fdffb2 ("net/mlx5: WQ, fixes for fragmented WQ buffers API")
Signed-off-by: NRaed Salem <raeds@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 546f28974d771b124fb0bf7b551b343888cf0419 ]

Previously virtnet_xdp_xmit() did not account for device tx counters,
which caused confusions.
To be consistent with SKBs, account them on freeing xdp_frames.
Reported-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 294c149a209c6196c2de85f512b52ef50f519949 ]

The "p" buffer is 0x4000 bytes long.  B3_RI_WTO_R1 is 0x190.  The value
of "regs->len" is in the 1-0x4000 range.  The bug here is that
"regs->len - B3_RI_WTO_R1" can be a negative value which would lead to
memory corruption and an abrupt crash.

Fixes: c3f8be96 ("[PATCH] skge: expand ethtool debug register dump")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ba59fb0273076637f0add4311faa990a5eec27c0 ]

In sctp_sendmesg(), when walking the list of endpoint associations, the
association can be dropped from the list, making the list corrupt.
Properly handle this by using list_for_each_entry_safe()

Fixes: 49102805 ("sctp: add support for snd flag SCTP_SENDALL process in sendmsg")
Reported-by: NSecunia Research <vuln@secunia.com>
Tested-by: NSecunia Research <vuln@secunia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit cfe4bd7a257f6d6f81d3458d8c9d9ec4957539e6 ]

Now when using stream reconfig to add out streams, stream->out
will get re-allocated, and all old streams' information will
be copied to the new ones and the old ones will be freed.

So without stream->out_curr updated, next time when trying to
send from stream->out_curr stream, a panic would be caused.

This patch is to check and update stream->out_curr when
allocating stream_out.

v1->v2:
  - define fa_index() to get elem index from stream->out_curr.
v2->v3:
  - repost with no change.

Fixes: 5bbbbe32 ("sctp: introduce stream scheduler foundations")
Reported-by: NYing Xu <yinxu@redhat.com>
Reported-by: syzbot+e33a3a138267ca119c7d@syzkaller.appspotmail.com
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 6dce3c20ac429e7a651d728e375853370c796e8d ]

When either "goto wait_interrupted;" or "goto wait_error;"
paths are taken, socket lock has already been released.

This patch fixes following syzbot splat :

WARNING: bad unlock balance detected!
5.0.0-rc4+ #59 Not tainted
-------------------------------------
syz-executor223/8256 is trying to release lock (sk_lock-AF_RXRPC) at:
[<ffffffff86651353>] rxrpc_recvmsg+0x6d3/0x3099 net/rxrpc/recvmsg.c:598
but there are no more locks to release!

other info that might help us debug this:
1 lock held by syz-executor223/8256:
 #0: 00000000fa9ed0f4 (slock-AF_RXRPC){+...}, at: spin_lock_bh include/linux/spinlock.h:334 [inline]
 #0: 00000000fa9ed0f4 (slock-AF_RXRPC){+...}, at: release_sock+0x20/0x1c0 net/core/sock.c:2798

stack backtrace:
CPU: 1 PID: 8256 Comm: syz-executor223 Not tainted 5.0.0-rc4+ #59
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 print_unlock_imbalance_bug kernel/locking/lockdep.c:3391 [inline]
 print_unlock_imbalance_bug.cold+0x114/0x123 kernel/locking/lockdep.c:3368
 __lock_release kernel/locking/lockdep.c:3601 [inline]
 lock_release+0x67e/0xa00 kernel/locking/lockdep.c:3860
 sock_release_ownership include/net/sock.h:1471 [inline]
 release_sock+0x183/0x1c0 net/core/sock.c:2808
 rxrpc_recvmsg+0x6d3/0x3099 net/rxrpc/recvmsg.c:598
 sock_recvmsg_nosec net/socket.c:794 [inline]
 sock_recvmsg net/socket.c:801 [inline]
 sock_recvmsg+0xd0/0x110 net/socket.c:797
 __sys_recvfrom+0x1ff/0x350 net/socket.c:1845
 __do_sys_recvfrom net/socket.c:1863 [inline]
 __se_sys_recvfrom net/socket.c:1859 [inline]
 __x64_sys_recvfrom+0xe1/0x1a0 net/socket.c:1859
 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x446379
Code: e8 2c b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 09 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fe5da89fd98 EFLAGS: 00000246 ORIG_RAX: 000000000000002d
RAX: ffffffffffffffda RBX: 00000000006dbc28 RCX: 0000000000446379
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00000000006dbc20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dbc2c
R13: 0000000000000000 R14: 0000000000000000 R15: 20c49ba5e353f7cf

Fixes: 248f219c ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: David Howells <dhowells@redhat.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c14f07c6211cc01d52ed92cce1fade5071b8d197 ]

This reverts commit 6623c0fb.

The original diagnosis was incorrect: it appears that the NIC had
PHY polling mode enabled, which meant that it overwrote the PHYs
advertisement register during negotiation.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Tested-by: NYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 6fa19f5637a6c22bc0999596bcc83bdcac8a4fa6 ]

syzbot was able to catch a bug in rds [1]

The issue here is that the socket might be found in a hash table
but that its refcount has already be set to 0 by another cpu.

We need to use refcount_inc_not_zero() to be safe here.

[1]

refcount_t: increment on 0; use-after-free.
WARNING: CPU: 1 PID: 23129 at lib/refcount.c:153 refcount_inc_checked lib/refcount.c:153 [inline]
WARNING: CPU: 1 PID: 23129 at lib/refcount.c:153 refcount_inc_checked+0x61/0x70 lib/refcount.c:151
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 23129 Comm: syz-executor3 Not tainted 5.0.0-rc4+ #53
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1db/0x2d0 lib/dump_stack.c:113
 panic+0x2cb/0x65c kernel/panic.c:214
 __warn.cold+0x20/0x48 kernel/panic.c:571
 report_bug+0x263/0x2b0 lib/bug.c:186
 fixup_bug arch/x86/kernel/traps.c:178 [inline]
 fixup_bug arch/x86/kernel/traps.c:173 [inline]
 do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271
 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:290
 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973
RIP: 0010:refcount_inc_checked lib/refcount.c:153 [inline]
RIP: 0010:refcount_inc_checked+0x61/0x70 lib/refcount.c:151
Code: 1d 51 63 c8 06 31 ff 89 de e8 eb 1b f2 fd 84 db 75 dd e8 a2 1a f2 fd 48 c7 c7 60 9f 81 88 c6 05 31 63 c8 06 01 e8 af 65 bb fd <0f> 0b eb c1 90 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 54 49
RSP: 0018:ffff8880a0cbf1e8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90006113000
RDX: 000000000001047d RSI: ffffffff81685776 RDI: 0000000000000005
RBP: ffff8880a0cbf1f8 R08: ffff888097c9e100 R09: ffffed1015ce5021
R10: ffffed1015ce5020 R11: ffff8880ae728107 R12: ffff8880723c20c0
R13: ffff8880723c24b0 R14: dffffc0000000000 R15: ffffed1014197e64
 sock_hold include/net/sock.h:647 [inline]
 rds_sock_addref+0x19/0x20 net/rds/af_rds.c:675
 rds_find_bound+0x97c/0x1080 net/rds/bind.c:82
 rds_recv_incoming+0x3be/0x1430 net/rds/recv.c:362
 rds_loop_xmit+0xf3/0x2a0 net/rds/loop.c:96
 rds_send_xmit+0x1355/0x2a10 net/rds/send.c:355
 rds_sendmsg+0x323c/0x44e0 net/rds/send.c:1368
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg+0xdd/0x130 net/socket.c:631
 __sys_sendto+0x387/0x5f0 net/socket.c:1788
 __do_sys_sendto net/socket.c:1800 [inline]
 __se_sys_sendto net/socket.c:1796 [inline]
 __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1796
 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458089
Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fc266df8c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 0000000000458089
RDX: 0000000000000000 RSI: 00000000204b3fff RDI: 0000000000000005
RBP: 000000000073bf00 R08: 00000000202b4000 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc266df96d4
R13: 00000000004c56e4 R14: 00000000004d94a8 R15: 00000000ffffffff

Fixes: cc4dfb7f ("rds: fix two RCU related problems")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: rds-devel@oss.oracle.com
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 8dfb8d2cceb76b74ad5b58cc65c75994329b4d5e ]

Broadcom STB chips support a deep sleep mode where all register
contents are lost. Because we were stashing the MagicPacket password
into some of these registers a suspend into that deep sleep then a
resumption would not lead to being able to wake-up from MagicPacket with
password again.

Fix this by keeping a software copy of the password and program it
during suspend.

Fixes: 83e82f4c ("net: systemport: add Wake-on-LAN support")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e8c8b53ccaff568fef4c13a6ccaf08bf241aa01a ]

When an ethernet frame is padded to meet the minimum ethernet frame
size, the padding octets are not covered by the hardware checksum.
Fortunately the padding octets are usually zero's, which don't affect
checksum. However, we have a switch which pads non-zero octets, this
causes kernel hardware checksum fault repeatedly.

Prior to:
commit '88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE ...")'
skb checksum was forced to be CHECKSUM_NONE when padding is detected.
After it, we need to keep skb->csum updated, like what we do for RXFCS.
However, fixing up CHECKSUM_COMPLETE requires to verify and parse IP
headers, it is not worthy the effort as the packets are so small that
CHECKSUM_COMPLETE can't save anything.

Fixes: 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"),
Cc: Eric Dumazet <edumazet@google.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 17ab4f61b8cd6f9c38e9d0b935d86d73b5d0d2b5 ]

The unbalance of master's promiscuity or allmulti will happen after ifdown
and ifup a slave interface which is in a bridge.

When we ifdown a slave interface , both the 'dsa_slave_close' and
'dsa_slave_change_rx_flags' will clear the master's flags. The flags
of master will be decrease twice.
In the other hand, if we ifup the slave interface again, since the
slave's flags were cleared the 'dsa_slave_open' won't set the master's
flag, only 'dsa_slave_change_rx_flags' that triggered by 'br_add_if'
will set the master's flags. The flags of master is increase once.

Only propagating flag changes when a slave interface is up makes
sure this does not happen. The 'vlan_dev_change_rx_flags' had the
same problem and was fixed, and changes here follows that fix.

Fixes: 91da11f8 ("net: Distributed Switch Architecture protocol support")
Signed-off-by: NRundong Ge <rdong.ge@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 75c05a74e745ae7d663b04d75777af80ada2233c ]

The ATU port vector contains a bit per port of the switch. The code
wrongly used it as a port number, and incremented a port counter. This
resulted in the wrong interfaces counter being incremented, and
potentially going off the end of the array of ports.

Fix this by using the source port ID for the violation, which really
is a port number.
Reported-by: NChris Healy <Chris.Healy@zii.aero>
Tested-by: NChris Healy <Chris.Healy@zii.aero>
Fixes: 65f60e45 ("net: dsa: mv88e6xxx: Keep ATU/VTU violation statistics")
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 00670cb8a73b10b10d3c40f045c15411715e4465 ]

This function can't succeed if dp->pl is NULL.  It will Oops inside the
call to return phylink_ethtool_get_eee(dp->pl, e);

Fixes: 1be52e97 ("dsa: slave: eee: Allow ports to use phylink")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c8101f7729daee251f4f6505f9d135ec08e1342f ]

Creating a macvtap on a DSA-backed interface results in the following
splat when lockdep is enabled:

[   19.638080] IPv6: ADDRCONF(NETDEV_CHANGE): lan0: link becomes ready
[   23.041198] device lan0 entered promiscuous mode
[   23.043445] device eth0 entered promiscuous mode
[   23.049255]
[   23.049557] ============================================
[   23.055021] WARNING: possible recursive locking detected
[   23.060490] 5.0.0-rc3-00013-g56c857a1b8d3 #118 Not tainted
[   23.066132] --------------------------------------------
[   23.071598] ip/2861 is trying to acquire lock:
[   23.076171] 00000000f61990cb (_xmit_ETHER){+...}, at: dev_set_rx_mode+0x1c/0x38
[   23.083693]
[   23.083693] but task is already holding lock:
[   23.089696] 00000000ecf0c3b4 (_xmit_ETHER){+...}, at: dev_uc_add+0x24/0x70
[   23.096774]
[   23.096774] other info that might help us debug this:
[   23.103494]  Possible unsafe locking scenario:
[   23.103494]
[   23.109584]        CPU0
[   23.112093]        ----
[   23.114601]   lock(_xmit_ETHER);
[   23.117917]   lock(_xmit_ETHER);
[   23.121233]
[   23.121233]  *** DEADLOCK ***
[   23.121233]
[   23.127325]  May be due to missing lock nesting notation
[   23.127325]
[   23.134315] 2 locks held by ip/2861:
[   23.137987]  #0: 000000003b766c72 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x338/0x4e0
[   23.146231]  #1: 00000000ecf0c3b4 (_xmit_ETHER){+...}, at: dev_uc_add+0x24/0x70
[   23.153757]
[   23.153757] stack backtrace:
[   23.158243] CPU: 0 PID: 2861 Comm: ip Not tainted 5.0.0-rc3-00013-g56c857a1b8d3 #118
[   23.166212] Hardware name: Globalscale Marvell ESPRESSOBin Board (DT)
[   23.172843] Call trace:
[   23.175358]  dump_backtrace+0x0/0x188
[   23.179116]  show_stack+0x14/0x20
[   23.182524]  dump_stack+0xb4/0xec
[   23.185928]  __lock_acquire+0x123c/0x1860
[   23.190048]  lock_acquire+0xc8/0x248
[   23.193724]  _raw_spin_lock_bh+0x40/0x58
[   23.197755]  dev_set_rx_mode+0x1c/0x38
[   23.201607]  dev_set_promiscuity+0x3c/0x50
[   23.205820]  dsa_slave_change_rx_flags+0x5c/0x70
[   23.210567]  __dev_set_promiscuity+0x148/0x1e0
[   23.215136]  __dev_set_rx_mode+0x74/0x98
[   23.219167]  dev_uc_add+0x54/0x70
[   23.222575]  macvlan_open+0x170/0x1d0
[   23.226336]  __dev_open+0xe0/0x160
[   23.229830]  __dev_change_flags+0x16c/0x1b8
[   23.234132]  dev_change_flags+0x20/0x60
[   23.238074]  do_setlink+0x2d0/0xc50
[   23.241658]  __rtnl_newlink+0x5f8/0x6e8
[   23.245601]  rtnl_newlink+0x50/0x78
[   23.249184]  rtnetlink_rcv_msg+0x360/0x4e0
[   23.253397]  netlink_rcv_skb+0xe8/0x130
[   23.257338]  rtnetlink_rcv+0x14/0x20
[   23.261012]  netlink_unicast+0x190/0x210
[   23.265043]  netlink_sendmsg+0x288/0x350
[   23.269075]  sock_sendmsg+0x18/0x30
[   23.272659]  ___sys_sendmsg+0x29c/0x2c8
[   23.276602]  __sys_sendmsg+0x60/0xb8
[   23.280276]  __arm64_sys_sendmsg+0x1c/0x28
[   23.284488]  el0_svc_common+0xd8/0x138
[   23.288340]  el0_svc_handler+0x24/0x80
[   23.292192]  el0_svc+0x8/0xc

This looks fairly harmless (no actual deadlock occurs), and is
fixed in a similar way to c6894dec ("bridge: fix lockdep
addr_list_lock false positive splat") by putting the addr_list_lock
in its own lockdep class.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 53bc8d2af08654659abfadfd3e98eb9922ff787c ]

During sendmsg() a cloned skb is saved via dp83640_txtstamp() in
->tx_queue. After the NIC sends this packet, the PHY will reply with a
timestamp for that TX packet. If the cable is pulled at the right time I
don't see that packet. It might gets flushed as part of queue shutdown
on NIC's side.
Once the link is up again then after the next sendmsg() we enqueue
another skb in dp83640_txtstamp() and have two on the list. Then the PHY
will send a reply and decode_txts() attaches it to the first skb on the
list.
No crash occurs since refcounting works but we are one packet behind.
linuxptp/ptp4l usually closes the socket and opens a new one (in such a
timeout case) so those "stale" replies never get there. However it does
not resume normal operation anymore.

Purge old skbs in decode_txts().

Fixes: cb646e2b ("ptp: Added a clock driver for the National Semiconductor PHYTER.")
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: NKurt Kanzenbach <kurt@linutronix.de>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fc42a689c4c097859e5bd37b5ea11b60dc426df6 ]

The test_insert_dup() function from lib/test_rhashtable.c passes a
pointer to a stack object to rhltable_init(). Allocate the hash table
dynamically to avoid that the following is reported with object
debugging enabled:

ODEBUG: object (ptrval) is on stack (ptrval), but NOT annotated.
WARNING: CPU: 0 PID: 1 at lib/debugobjects.c:368 __debug_object_init+0x312/0x480
Modules linked in:
EIP: __debug_object_init+0x312/0x480
Call Trace:
 ? debug_object_init+0x1a/0x20
 ? __init_work+0x16/0x30
 ? rhashtable_init+0x1e1/0x460
 ? sched_clock_cpu+0x57/0xe0
 ? rhltable_init+0xb/0x20
 ? test_insert_dup+0x32/0x20f
 ? trace_hardirqs_on+0x38/0xf0
 ? ida_dump+0x10/0x10
 ? jhash+0x130/0x130
 ? my_hashfn+0x30/0x30
 ? test_rht_init+0x6aa/0xab4
 ? ida_dump+0x10/0x10
 ? test_rhltable+0xc5c/0xc5c
 ? do_one_initcall+0x67/0x28e
 ? trace_hardirqs_off+0x22/0xe0
 ? restore_all_kernel+0xf/0x70
 ? trace_hardirqs_on_thunk+0xc/0x10
 ? restore_all_kernel+0xf/0x70
 ? kernel_init_freeable+0x142/0x213
 ? rest_init+0x230/0x230
 ? kernel_init+0x10/0x110
 ? schedule_tail_wrapper+0x9/0xc
 ? ret_from_fork+0x19/0x24

Cc: Thomas Graf <tgraf@suug.ch>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>