- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 08 3月, 2010 1 次提交
-
-
由 Uwe Kleine-König 提交于
A pointer to omap24xxcam_probe is passed to the core via platform_driver_register and so the function must not disappear when the .init sections are discarded. Otherwise (if also having HOTPLUG=y) unbinding and binding a device to the driver via sysfs will result in an oops as does a device being registered late. An alternative to this patch is using platform_driver_probe instead of platform_driver_register plus removing the pointer to the probe function from the struct platform_driver. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: NSakari Ailus <sakari.ailus@maxwell.research.nokia.com> Acked-by: NTrilok Soni <soni.trilok@gmail.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 03 3月, 2010 1 次提交
-
-
由 Oliver Neukum 提交于
Straightforward push into the drivers to allow auditing individual drivers separately Signed-off-by: NOliver Neukum <oliver@neukum.org> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 27 2月, 2010 37 次提交
-
-
由 Mauro Carvalho Chehab 提交于
This is not needed, since the function already do it. Also, it causes a warning at the compilation, since a new var is declared in the middle of the code. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Baruch Siach 提交于
When code <= V4L2_MBUS_FMT_FIXED soc_mbus_get_fmtdesc returns a pointer to mbus_fmt[x], where x < 0. Fix this. Signed-off-by: NBaruch Siach <baruch@tkos.co.il> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> CC: stable@kernel.org Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Dirk Herrendoerfer 提交于
This patch adds support for the built-in dvb device of a Samsung SMT7020s (x86 based STB) to the cx88 family. Signed-off-by: NDirk Herrendoerfer <d.herrendoerfer@herrendoerfer.name> Signed-off-by: NHelmut Auer <helmut@helmutauer.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
Only tested with an stv6422 based cam, as that is the only stv06xx cam I have with a button. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
Due to hardware limitations this only works while the camera is streaming. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
Due to hardware limitations this only works while the camera is streaming. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
Note due to hardware limitiations (no interrupt endpoint), this only works when the camera is streaming. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
gspca_main: Fix a compile error when CONFIG_INPUT is not set. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
2 small changes to input device error handling: 1) Make it fatal when we fail to create an input device (it is either this or add checks for gspca_dev->input_dev being NULL in a lot of places) 2) Since we allow gspca_input_create_urb() to fail everywhere we call it, and thus never check its return value, make it void. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
Allow use of the gspca core input device creation code by subdrivers which have non interrupt driven camera buttons. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
My experience with fixing up the controls for the PAS sensors in sonixb, has lead me to re-investigate the exposure control for the pac7302. I've now found a regular exposure register in register bank 3 (which seems to be the sensor registers bank), and with this added a proper fine grained exposure control. This patch also updates the do_autogain function to work properly with this new finer grained control. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
Make the sonixb driver handle pas106 and pas202 cameras, when both it and the sn9c102 driver are enabled in the kernel configuration. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
Fixup brightness ctrl and add gain and exposure ctrls for PAS106B sensors, this allows enabling autogain (done), and makes the cam usable in low light conditions. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Theodore Kilgore 提交于
This camera has a sensor type we did not support sofar, this patch adds support for the new sensor type found in the Sakar 1638x CyberPix. Signed-off-by: NTheodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
In 640x480, if the reg11 has less than 4, the image is unstable (the bridge goes into a higher compression mode which we have not reverse engineered yet). Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
Fixup brightness ctrl and add gain and exposure ctrls for PAS202BCB sensors, this allows enabling autogain (done), and makes the cam usable in low light conditions. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
Some sensors only allow controlling the exposure by changing the clockdiv, which means that exposure takes pretty large jumps (for example when going from a div of 1 to 2, the exposure doubles). Use 2 different entries in the controls array for these 2 different types of exposure (always disabling one), and; Add a new autogain algorithm for the coarse exposure case, which normally changes the gain setting, only touching the exposure setting if the desired luminance cannot be reached with gain, and after an exposure change once more first tries gain, etc. Thus avoiding exposure changes, and the resulting oscilation because of the huge steps these exposure controls take. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
Leave bridge gain at 1.0 when we have a sensor gain, while at it also change the bridge gain setting code to write both registers in one go saving us a usb transaction. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
gspca_sonixj: Add camera button support Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
gspca_sonixb: Add support for camera button Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
gscpa_zc3xx: Add support for camera button Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
gscpa_pac7311: Add support for camera button Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
gscpa_pac207: Add support for camera button Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans de Goede 提交于
gspca_sq905c: Add an additional USB-ID Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Theodore Kilgore 提交于
Simplify sensor detection a bit (share more of the code between cif and vga cameras). Also remove an unnecessary write from zero_the_pointer(). Signed-off-by: NTheodore Kilgore <kilgota@banach.math.auburn.edu> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Andy Walls 提交于
Based on experiments by Eric Wescott, edit the Sony GigaPocket (Kikyou) card entry video and audio mux settings. Signed-off-by: NAndy Walls <awalls@radix.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Eric Anderson 提交于
This is a slightly modified version of Eric Anderson's original patch for the Sony Giga Pocket board. It has been updated to apply to the latest ivtv driver version by Hans Verkuil <hverkuil@xs4all.nl> and Andy Walls <awalls@radix.net>. Also Andy Walls modified the patch to use a new Sony BTF-Pnx01Z tuner entry based on Eric Anderson's experimental findings for the bandswitch. >From Eric Anderson's original email: 1. The tuner on the card doesn't seem to match any standard ones. I modified an existing tuner entry. Ideally a new tuner entry should be created. (The only difference from the one I modified is that the low-to-mid range frequency cut-off is slightly different, as are the bit config settings.) 2. It wasn't obvious how to choose a second audio input other than using "radio" as an option. Basically there's two GPIO audio inputs. Using radio allowed me to avoid major restructuring to the code. (perhaps other cards don't have this often...) 3. It's not clear that there's a mute setting that works. Not sure why. 4. I haven't had a chance to test the two Svideo inputs. I set them to COMPOSITE1 and SVIDEO2, but I'm not sure those are the correct settings. The standard composite video inputs seem to work. Signed-off-by: NAndy Walls <awalls@radix.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Andy Walls 提交于
ivtv_api_get_data() was performing more PCI MMIO than needed, resulting often in it accounting for more than half the total time spent in ivtv_irq_handler(). Now it only reads at most 7 of the 16 mailbox data words over the PCI bus, and in some instances only 2 or 3 data words as needed. Signed-off-by: NAndy Walls <awalls@radix.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Murali Karicheri 提交于
Adding Makefile and Kconfig for ISIF driver Reviewed-by: NHans Verkuil <hverkuil@xs4all.nl> Reviewed-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMurali Karicheri <mkaricheri@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Murali Karicheri 提交于
Enhancements to support DM365 ISP5 and VPSS module configuration. Also cleaned up the driver by removing redundant variables. Reviewed-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMurali Karicheri <mkaricheri@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Murali Karicheri 提交于
This is the source file for ISIF driver on DM365. ISIF driver is equivalent to CCDC driver on DM355 and DM644x. This driver is tested for YUV capture from TVP514x driver. This patch contains the header files required for this driver. Reviewed-by: NNori, Sekhar <nsekhar@ti.com> Reviewed-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMurali Karicheri <mkaricheri@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Murali Karicheri 提交于
This is the header file for ISIF driver on DM365. ISIF driver is equivalent to CCDC driver on DM355 and DM644x. This driver is tested for YUV capture from TVP514x driver. This patch contains the header files required for this driver. Reviewed-by: NNori, Sekhar <nsekhar@ti.com> Reviewed-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMurali Karicheri <mkaricheri@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mike Isely 提交于
We know that the 300msec settling time after starting the digitizer is only really needed when the digitizer is a SAA7115. So if we're not using a SAA7115, skip the delay. Signed-off-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mike Isely 提交于
After implementing a 300msec wait between digitizer start and encoder start, it has been determined that we don't need to wait quite as long before configuring the encoder. This reduces the wait period from 100msec back to 50msec. Signed-off-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mike Isely 提交于
Martin Dauskardt <martin.dauskardt@gmx.de> has determined that the encoder has a much better chance of starting cleanly if we deliberately hold off starting it util the video digitizer has had a chance to run for at least 300msec first. These changes implement an enforced 300msec wait in the state machine that orchestrates streaming start / stop. Signed-off-by: NMike Isely <isely@pobox.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
When the saa7111 driver was merged into saa7115 several bugs were introduced, in particular with the saa7111a support as is used in the mxb.c driver. This patch fixes the saa7111a support. This was tested with the mxb driver. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-