Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 82e839c9 编写于 作者: H Hans de Goede 提交者： Mauro Carvalho Chehab
浏览文件
操作

V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and exposure ctrls 

Fixup brightness ctrl and add gain and exposure ctrls for PAS202BCB sensors,
this allows enabling autogain (done), and makes the cam usable in low light
conditions.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 26984b09
隐藏空白更改
内联 并排
Showing with 122 addition and 48 deletion
drivers/media/video/gspca/sonixb.c
浏览文件 @ 82e839c9
......@@ -176,7 +176,7 @@ static const struct ctrl sd_ctrls[] = {
.maximum = 255,
.step = 1,
#define GAIN_DEF 127
#define GAIN_KNEE 200
#define GAIN_KNEE 230
.default_value = GAIN_DEF,
},
.set = sd_setgain,
......@@ -188,10 +188,10 @@ static const struct ctrl sd_ctrls[] = {
.id = V4L2_CID_EXPOSURE,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Exposure",
#define EXPOSURE_DEF 33 /* 33 ms / 30 fps */
#define EXPOSURE_KNEE 100 /* 100 ms / 10 fps */
#define EXPOSURE_DEF 66 /* 33 ms / 30 fps (except on PAS202) */
#define EXPOSURE_KNEE 200 /* 100 ms / 10 fps (except on PAS202) */
.minimum = 0,
.maximum = 511,
.maximum = 1023,
.step = 1,
.default_value = EXPOSURE_DEF,
.flags = 0,
......@@ -454,31 +454,41 @@ static const __u8 initPas202[] = {
0x44, 0x44, 0x21, 0x30, 0x00, 0x00, 0x00, 0x80, 0x40, 0x00, 0x00, 0x00,
0x00, 0x00,
0x00, 0x00, 0x00, 0x06, 0x03, 0x0a,
0x28, 0x1e, 0x28, 0x89, 0x20,
0x28, 0x1e, 0x20, 0x89, 0x20,
0x00, 0x00, 0x02, 0x03, 0x0f, 0x0c
};
/* "Known" PAS202BCB registers:
0x02 clock divider
0x04 Variable framerate bits 6-11 (*)
0x05 Var framerate bits 0-5, one must leave the 2 msb's at 0 !!
0x07 Blue Gain
0x08 Green Gain
0x09 Red Gain
0x0b offset sign bit (bit0 1 > negative offset)
0x0c offset
0x0e Unknown image is slightly brighter when bit 0 is 0, if reg0f is 0 too,
leave at 1 otherwise we get a jump in our exposure control
0x0f Exposure 0-255, 0 = use full frame time, 255 = no exposure at all
0x10 Master gain 0 - 31
0x11 write 1 to apply changes
(*) The variable framerate control must never be set lower then 500
which sets the framerate at 30 / reg02, otherwise vsync is lost.
*/
static const __u8 pas202_sensor_init[][8] = {
{0xa0, 0x40, 0x02, 0x03, 0x00, 0x00, 0x00, 0x10},
/* Set the clock divider to 4 -> 30 / 4 = 7.5 fps, we would like
to set it lower, but for some reason the bridge starts missing
vsync's then */
{0xa0, 0x40, 0x02, 0x04, 0x00, 0x00, 0x00, 0x10},
{0xd0, 0x40, 0x04, 0x07, 0x34, 0x00, 0x09, 0x10},
{0xd0, 0x40, 0x08, 0x01, 0x00, 0x00, 0x01, 0x10},
{0xd0, 0x40, 0x0C, 0x00, 0x0C, 0x00, 0x32, 0x10},
{0xd0, 0x40, 0x0C, 0x00, 0x0C, 0x01, 0x32, 0x10},
{0xd0, 0x40, 0x10, 0x00, 0x01, 0x00, 0x63, 0x10},
{0xa0, 0x40, 0x15, 0x70, 0x01, 0x00, 0x63, 0x10},
{0xa0, 0x40, 0x18, 0x00, 0x01, 0x00, 0x63, 0x10},
{0xa0, 0x40, 0x11, 0x01, 0x01, 0x00, 0x63, 0x10},
{0xa0, 0x40, 0x03, 0x56, 0x01, 0x00, 0x63, 0x10},
{0xa0, 0x40, 0x11, 0x01, 0x01, 0x00, 0x63, 0x10},
{0xb0, 0x40, 0x04, 0x07, 0x2a, 0x00, 0x63, 0x10},
{0xb0, 0x40, 0x0e, 0x00, 0x3d, 0x00, 0x63, 0x10},
{0xa0, 0x40, 0x11, 0x01, 0x3d, 0x00, 0x63, 0x16},
{0xa0, 0x40, 0x10, 0x08, 0x3d, 0x00, 0x63, 0x15},
{0xa0, 0x40, 0x02, 0x04, 0x3d, 0x00, 0x63, 0x16},
{0xa0, 0x40, 0x11, 0x01, 0x3d, 0x00, 0x63, 0x16},
{0xb0, 0x40, 0x0e, 0x00, 0x31, 0x00, 0x63, 0x16},
{0xa0, 0x40, 0x11, 0x01, 0x31, 0x00, 0x63, 0x16},
{0xa0, 0x40, 0x10, 0x0e, 0x31, 0x00, 0x63, 0x15},
{0xa0, 0x40, 0x11, 0x01, 0x31, 0x00, 0x63, 0x16},
};
static const __u8 initTas5110c[] = {
......@@ -524,8 +534,8 @@ SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3,
F_GAIN, 0, 0x21),
SENS(initPas106, NULL, pas106_sensor_init, NULL, NULL, F_SIF, NO_EXPO|NO_FREQ,
0),
SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, 0,
NO_EXPO|NO_FREQ, 0),
SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, F_GAIN,
NO_FREQ, 0),
SENS(initTas5110c, NULL, tas5110_sensor_init, NULL, NULL,
F_GAIN|F_SIF|F_COARSE_EXPO, NO_BRIGHTNESS|NO_FREQ, 0),
SENS(initTas5110d, NULL, tas5110_sensor_init, NULL, NULL,
......@@ -633,27 +643,20 @@ static void setbrightness(struct gspca_dev *gspca_dev)
break;
}
case SENSOR_PAS202: {
/* __u8 i2cpexpo1[] =
{0xb0, 0x40, 0x04, 0x07, 0x2a, 0x00, 0x63, 0x16}; */
__u8 i2cpexpo[] =
{0xb0, 0x40, 0x0e, 0x01, 0xab, 0x00, 0x63, 0x16};
__u8 i2cp202[] =
{0xa0, 0x40, 0x10, 0x0e, 0x31, 0x00, 0x63, 0x15};
static __u8 i2cpdoit[] =
{0xa0, 0x40, 0x11, 0x01, 0x31, 0x00, 0x63, 0x16};
/* change reg 0x10 */
i2cpexpo[4] = 0xff - sd->brightness;
/* if(i2c_w(gspca_dev,i2cpexpo1) < 0)
goto err; */
/* if(i2c_w(gspca_dev,i2cpdoit) < 0)
goto err; */
if (i2c_w(gspca_dev, i2cpexpo) < 0)
goto err;
if (i2c_w(gspca_dev, i2cpdoit) < 0)
goto err;
i2cp202[3] = sd->brightness >> 3;
if (i2c_w(gspca_dev, i2cp202) < 0)
__u8 i2cpbright[] =
{0xb0, 0x40, 0x0b, 0x00, 0x00, 0x00, 0x00, 0x16};
const __u8 i2cpdoit[] =
{0xa0, 0x40, 0x11, 0x01, 0x00, 0x00, 0x00, 0x16};
if (sd->brightness < 127) {
/* change reg 0x0b, signreg */
i2cpbright[3] = 0x01;
/* set reg 0x0c, offset */
i2cpbright[4] = 127 - sd->brightness;
} else
i2cpbright[4] = sd->brightness - 127;
if (i2c_w(gspca_dev, i2cpbright) < 0)
goto err;
if (i2c_w(gspca_dev, i2cpdoit) < 0)
goto err;
......@@ -706,6 +709,27 @@ static void setsensorgain(struct gspca_dev *gspca_dev)
goto err;
break;
}
case SENSOR_PAS202: {
__u8 i2cpgain[] =
{0xa0, 0x40, 0x10, 0x00, 0x00, 0x00, 0x63, 0x15};
__u8 i2cpcolorgain[] =
{0xc0, 0x40, 0x07, 0x00, 0x00, 0x00, 0x00, 0x15};
const __u8 i2cpdoit[] =
{0xa0, 0x40, 0x11, 0x01, 0x00, 0x00, 0x63, 0x16};
i2cpgain[3] = sd->gain >> 3;
i2cpcolorgain[3] = sd->gain >> 4;
i2cpcolorgain[4] = sd->gain >> 4;
i2cpcolorgain[5] = sd->gain >> 4;
if (i2c_w(gspca_dev, i2cpgain) < 0)
goto err;
if (i2c_w(gspca_dev, i2cpcolorgain) < 0)
goto err;
if (i2c_w(gspca_dev, i2cpdoit) < 0)
goto err;
break;
}
}
return;
err:
......@@ -779,7 +803,7 @@ static void setexposure(struct gspca_dev *gspca_dev)
} else
reg10_max = 0x41;
reg11 = (30 * sd->exposure + 999) / 1000;
reg11 = (15 * sd->exposure + 999) / 1000;
if (reg11 < 1)
reg11 = 1;
else if (reg11 > 16)
......@@ -791,8 +815,8 @@ static void setexposure(struct gspca_dev *gspca_dev)
reg11 = 3;
/* frame exposure time in ms = 1000 * reg11 / 30 ->
reg10 = sd->exposure * reg10_max / (1000 * reg11 / 30) */
reg10 = (sd->exposure * 30 * reg10_max) / (1000 * reg11);
reg10 = (sd->exposure / 2) * reg10_max / (1000 * reg11 / 30) */
reg10 = (sd->exposure * 15 * reg10_max) / (1000 * reg11);
/* Don't allow this to get below 10 when using autogain, the
steps become very large (relatively) when below 10 causing
......@@ -815,10 +839,53 @@ static void setexposure(struct gspca_dev *gspca_dev)
if (i2c_w(gspca_dev, i2c) == 0)
sd->reg11 = reg11;
else
PDEBUG(D_ERR, "i2c error exposure");
goto err;
break;
}
case SENSOR_PAS202: {
__u8 i2cpframerate[] =
{0xb0, 0x40, 0x04, 0x00, 0x00, 0x00, 0x00, 0x16};
__u8 i2cpexpo[] =
{0xa0, 0x40, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x16};
const __u8 i2cpdoit[] =
{0xa0, 0x40, 0x11, 0x01, 0x00, 0x00, 0x00, 0x16};
int framerate_ctrl;
/* The exposure knee for the autogain algorithm is 200
(100 ms / 10 fps on other sensors), for values below this
use the control for setting the partial frame expose time,
above that use variable framerate. This way we run at max
framerate (640x480@7.5 fps, 320x240@10fps) until the knee
is reached. Using the variable framerate control above 200
is better then playing around with both clockdiv + partial
frame exposure times (like we are doing with the ov chips),
as that sometimes leads to jumps in the exposure control,
which are bad for auto exposure. */
if (sd->exposure < 200) {
i2cpexpo[3] = 255 - (sd->exposure * 255) / 200;
framerate_ctrl = 500;
} else {
/* The PAS202's exposure control goes from 0 - 4095,
but anything below 500 causes vsync issues, so scale
our 200-1023 to 500-4095 */
framerate_ctrl = (sd->exposure - 200) * 1000 / 229 +
500;
}
i2cpframerate[3] = framerate_ctrl >> 6;
i2cpframerate[4] = framerate_ctrl & 0x3f;
if (i2c_w(gspca_dev, i2cpframerate) < 0)
goto err;
if (i2c_w(gspca_dev, i2cpexpo) < 0)
goto err;
if (i2c_w(gspca_dev, i2cpdoit) < 0)
goto err;
break;
}
}
return;
err:
PDEBUG(D_ERR, "i2c error exposure");
}
static void setfreq(struct gspca_dev *gspca_dev)
......@@ -965,9 +1032,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
reg12_19[6] = sn9c10x[0x18 - 1] | (mode << 4);
/* Special cases where reg 17 and or 19 value depends on mode */
switch (sd->sensor) {
case SENSOR_PAS202:
reg12_19[5] = mode ? 0x24 : 0x20;
break;
case SENSOR_TAS5130CXX:
/* probably not mode specific at all most likely the upper
nibble of 0x19 is exposure (clock divider) just as with
......@@ -1003,6 +1067,16 @@ static int sd_start(struct gspca_dev *gspca_dev)
sensor_data[sd->sensor].sensor_bridge_init_size[
sd->bridge]);
/* Mode specific sensor setup */
switch (sd->sensor) {
case SENSOR_PAS202: {
const __u8 i2cpclockdiv[] =
{0xa0, 0x40, 0x02, 0x03, 0x00, 0x00, 0x00, 0x10};
/* clockdiv from 4 to 3 (7.5 -> 10 fps) when in low res mode */
if (mode)
i2c_w(gspca_dev, i2cpclockdiv);
}
}
/* H_size V_size 0x28, 0x1e -> 640x480. 0x16, 0x12 -> 352x288 */
reg_w(gspca_dev, 0x15, &reg12_19[3], 2);
/* compression register */
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或