This patch contains
- new tuning code for the tda827xa silicon tuner.
- controls the preamplifier of some boards with this tuner.
- support for the Philips Tiger S hybrid DVB-T reference design.
- reworked the saa7134-dvb modulue to get rid of most of the
  small board specific functions.
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

These entries mainly are to support configurations of the tda827x
silicon tuner with a preamplifier.
The values can be set throgh the attach inform or through
the extended TUNER_SET_TYPE_ADDR client call. The function pointer
will only be updated if the parameter is not NULL.
Since a typecast is necessary to set the pointer, i added a typedef for
this pointer (tuner_gpio_func_t) in tuner.h
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This function allows to set, clear and tristate the GPIO ports.
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

There are the following changes:
- separate configuration of IF and GPIOs.
- set GPIOs before firmware load. This helps to avoid I2C address
  collisions.
- if desired invert GPIOs at sleep (automatic return to analog mode of card).
- added 3 tuner configuration bytes to config stuct.
- added i2c gate address to config struct.
- moved _state struct declaration to header file to make it accessible
  on board layer.
- added "conf_probed" to the state struct to allow i.e. probing for correct
  tuner version.
- changed firmware load mechanism to always:
  + check if already loaded
  + try to boot from eeprom
  + try downlad from host
- corrected name of tda10046 firmware image (backward compatible).
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The cx23415 adds some extra features that this DVB decoding API did
not support. This API has been expanded to support the required
features. Both source and binary backwards compatibility is kept
intact by these changes. So existing applications are not affected.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NRalph Metzler <rjkm@metzlerbros.de>
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

VIDIOC_G_CHIP_IDENT improves debugging of card problems: it can be
used to detect which chips are on the board and based on that information
selected register dumps can be made, making it easy to debug complicated
media chips containing tens or hundreds of registers.
This ioctl replaces the internal VIDIOC_INT_G_CHIP_IDENT ioctl.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Added support for loading cx88-dvb and cx88-blackbird
Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

added support for deferred module requesting to cx88
Signed-off-by: NMarkus Rechberger <mrechberger@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Added VIDIOC_INT_G_STD_OUTPUT and VIDIOC_INT_S_STD_OUTPUT to allow drivers
to set the TV standard for video output separately from the video capture.
This is needed for cx23415 support where the decoder is separate from the
encoder and can have a different TV standard.
Modified the saa7127 module to listen to VIDIOC_INT_G/S_STD_OUTPUT instead
of VIDIOC_G/S_STD.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY support.
Also add support for local and global alpha overlays.
Add new field enums V4L2_FIELD_INTERLACED_TB and V4L2_FIELD_INTERLACED_BT.
These changes are needed to support the ivtv On Screen Display features.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch contains the following possible cleanups:
- remove the following unused global functions:
  - bttv-if.c: bttv_get_cardinfo()
  - bttv-if.c: bttv_get_id()
  - bttv-if.c: bttv_get_gpio_queue()
  - bttv-if.c: bttv_i2c_call()
- remove the following unused EXPORT_SYMBOL's:
  - bttv-gpio.c: bttv_sub_bus_type
  - bttv-gpio.c: bttv_gpio_inout
  - bttv-gpio.c: bttv_gpio_read
  - bttv-gpio.c: bttv_gpio_write
  - bttv-gpio.c: bttv_gpio_bits
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add V4L2_CAP_VIDEO_OUTPUT_POS capability and x, y position coordinates
to struct v4l2_pix_format.
This is needed to support positioning the MPEG/YUV output of the cx23415.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Added V4L2_CID_MPEG_AUDIO_MUTE, V4L2_CID_MPEG_VIDEO_MUTE and
V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS controls together with
their implementation in the cx2341x module.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch adds a V4L2 driver giving support for USB webcams based on the
zr364xx chipsets.
Signed-off-by: NAntoine Jacquet <royale@zerezo.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  selinux: preserve boolean values across policy reloads
  selinux: change numbering of boolean directory inodes in selinuxfs
  selinux: remove unused enumeration constant from selinuxfs
  selinux: explicitly number all selinuxfs inodes
  selinux: export initial SID contexts via selinuxfs
  selinux: remove userland security class and permission definitions
  SELinux: move security_skb_extlbl_sid() out of the security server
  MAINTAINERS: update selinux entry
  SELinux: rename selinux_netlabel.h to netlabel.h
  SELinux: extract the NetLabel SELinux support from the security server
  NetLabel: convert a BUG_ON in the CIPSO code to a runtime check
  NetLabel: cleanup and document CIPSO constants

show_state() (SysRq-T) developed the buggy habbit of not showing
TASK_RUNNING tasks.  This was due to the mistaken belief that state_filter
== -1 would be a pass-through filter - while in reality it did not let
TASK_RUNNING == 0 p->state values through.

Fix this by restoring the original '!state_filter means all tasks'
special-case i had in the original version.  Test-built and test-booted on
i686, SysRq-T now works as intended.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NDaniel Walker <dwalker@mvista.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.infradead.org/ubi-2.6:
  UBI: remove unused variable
  UBI: add me to MAINTAINERS
  JFFS2: add UBI support
  UBI: Unsorted Block Images

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (27 commits)
  ocfs2: Cache extent records
  ocfs2: Remember rw lock level during direct io
  ocfs2: Fix up i_blocks calculation to know about holes
  ocfs2: Fix extent lookup to return true size of holes
  ocfs2: Read from an unwritten extent returns zeros
  ocfs2: make room for unwritten extents flag
  ocfs2: Use own splice write actor
  ocfs2: Use do_sync_mapping_range() in ocfs2_zero_tail_for_truncate()
  [PATCH] Turn do_sync_file_range() into do_sync_mapping_range()
  ocfs2: zero tail of sparse files on truncate
  ocfs2: Teach ocfs2_get_block() about holes
  ocfs2: remove ocfs2_prepare_write() and ocfs2_commit_write()
  ocfs2: teach ocfs2_file_aio_write() about sparse files
  ocfs2: Turn off shared writeable mmap for local files systems with holes.
  ocfs2: abstract out allocation locking
  ocfs2: teach extend/truncate about sparse files
  ocfs2: temporarily remove extent map caching
  ocfs2: sparse b-tree support
  ocfs2: small cleanup of ocfs2_request_delete()
  ocfs2: remove unused code
  ...

* 'e1000-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  e1000: FIX: Stop raw interrupts disabled nag from RT
  e1000: FIX: firmware handover bits
  e1000: FIX: be ready for incoming irq at pci_request_irq

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: (49 commits)
  IB: Set class_dev->dev in core for nice device symlink
  IB/ehca: Implement modify_port
  IB/umad: Clarify documentation of transaction ID
  IPoIB/cm: spin_lock_irqsave() -> spin_lock_irq() replacements
  IB/mad: Change SMI to use enums rather than magic return codes
  IB/umad: Implement GRH handling for sent/received MADs
  IB/ipoib: Use ib_init_ah_from_path to initialize ah_attr
  IB/sa: Set src_path_bits correctly in ib_init_ah_from_path()
  IB/ucm: Simplify ib_ucm_event()
  RDMA/ucma: Simplify ucma_get_event()
  IB/mthca: Simplify CQ cleaning in mthca_free_qp()
  IB/mthca: Fix mthca_write_mtt() on HCAs with hidden memory
  IB/mthca: Update HCA firmware revisions
  IB/ipath: Fix WC format drift between user and kernel space
  IB/ipath: Check that a UD work request's address handle is valid
  IB/ipath: Remove duplicate stuff from ipath_verbs.h
  IB/ipath: Check reserved memory keys
  IB/ipath: Fix unit selection when all CPU affinity bits set
  IB/ipath: Don't allow QPs 0 and 1 to be opened multiple times
  IB/ipath: Disable IB link earlier in shutdown sequence
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (67 commits)
  [SCSI] SUNESP: Complete driver rewrite to version 2.0
  [SPARC64]: Convert PCI over to generic struct iommu/strbuf.
  [SPARC]: device_node name constification fallout
  [SPARC64]: Convert SBUS over to generic iommu/strbuf structs.
  [SPARC64]: Add generic iommu and strbuf structs to iommu.h
  [SPARC64]: Consolidate {sbus,pci}_iommu_arena.
  [SPARC]: Make device_node name and type const
  [SPARC64]: constify some paramaters of OF routines
  [TIGON3]: of_get_property() returns const.
  [SPARC64]: Fix PCI rework to adhere to of_get_property() const return.
  [SPARC64]: Document and fix calculation of pages_avail.
  [SPARC64]: Make sure pbm->prom_node is setup easly enough in psycho.c
  [SPARC64]: Use bootmem_bootmap_pages() in choose_bootmap_pfn().
  [SPARC64]: Add proper header file extern for cmdline_memory_size.
  [SPARC64]: Kill sparc_ultra_dump_{i,d}tlb()
  [SPARC64]: Use DECLARE_BITMAP and BITS_TO_LONGS in mm/init.c
  [SPARC64]: Give move verbose show_mem() output just like i386.
  [SPARC64]: Mark show_mem() printk's with KERN_INFO.
  [SPARC64]: Kill kvaddr_to_phys() and friends.
  [SPARC64]: Privatize sun4u_get_pte() and fix name.
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (448 commits)
  [IPV4] nl_fib_lookup: Initialise res.r before fib_res_put(&res)
  [IPV6]: Fix thinko in ipv6_rthdr_rcv() changes.
  [IPV4]: Add multipath cached to feature-removal-schedule.txt
  [WIRELESS] cfg80211: Clarify locking comment.
  [WIRELESS] cfg80211: Fix locking in wiphy_new.
  [WEXT] net_device: Don't include wext bits if not required.
  [WEXT]: Misc code cleanups.
  [WEXT]: Reduce inline abuse.
  [WEXT]: Move EXPORT_SYMBOL statements where they belong.
  [WEXT]: Cleanup early ioctl call path.
  [WEXT]: Remove options.
  [WEXT]: Remove dead debug code.
  [WEXT]: Clean up how wext is called.
  [WEXT]: Move to net/wireless
  [AFS]: Eliminate cmpxchg() usage in vlocation code.
  [RXRPC]: Fix pointers passed to bitops.
  [RXRPC]: Remove bogus atomic_* overrides.
  [AFS]: Fix u64 printing in debug logging.
  [AFS]: Add "directory write" support.
  [AFS]: Implement the CB.InitCallBackState3 operation.
  ...

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (22 commits)
  [MIPS] Don't force frame pointers for lockdep on MIPS
  [MIPS] update vr41xx Kconfig
  [MIPS] remove 2 select entries for VR41xx
  [MIPS] rename VR41XX to VR4100 series
  [MIPS] Use DEFINE_SPINLOCK instead of SPIN_LOCK_UNLOCKED.
  [MIPS] Replace old fashioned "__typeof" with "__typeof__".
  [MIPS] Remove unused _THREAD_SIZE_ORDER from asm-offset.c.
  [MIPS] Change PCI host bridge setup/resources
  [MIPS] Register PCI host bridge resource earlier
  [MIPS] Remove pnx8550-v2pci_defconfig
  [MIPS] Add bcm1480 ZBus trace support, fix wait related bugs
  [MIPS] Updated Sibyte headers
  [MIPS] Remove unused argument from kunmap_coherent().
  [MIPS] Malta: Delete unused prototype of mips_timer_interrupt.
  [MIPS] Select ZONE_DMA only if GENERIC_ISA_DMA selected
  [MIPS] MIPS Tech: Get rid of volatile in core code.
  [MIPS] IP22: Get rid of volatile in IP22 core code.
  [MIPS] JMR3927 cleanup
  [MIPS] merge GT64111 PCI routines and GT64120 PCI_0 routines
  [MIPS] Cobalt: Split PCI codes from setup.c
  ...

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (38 commits)
  [S390] SPIN_LOCK_UNLOCKED cleanup in drivers/s390
  [S390] Clean up smp code in preparation for some larger changes.
  [S390] Remove debugging junk.
  [S390] Switch etr from tasklet to workqueue.
  [S390] split page_test_and_clear_dirty.
  [S390] Processor degradation notification.
  [S390] vtime: cleanup per_cpu usage.
  [S390] crypto: cleanup.
  [S390] sclp: fix coding style.
  [S390] vmlogrdr: stop IUCV connection in vmlogrdr_release.
  [S390] sclp: initialize early.
  [S390] ctc: kmalloc->kzalloc/casting cleanups.
  [S390] zfcpdump support.
  [S390] dasd: Add ipldev parameter.
  [S390] dasd: Add sysfs attribute status and generate uevents.
  [S390] Improved kernel stack overflow checking.
  [S390] Get rid of console setup functions.
  [S390] No execute support cleanup.
  [S390] Minor fault path optimization.
  [S390] Use generic bug.
  ...

* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32: (21 commits)
  [AVR32] Fix compile error with gcc 4.1
  avr32: remove unneeded cast in atomic.h
  AVR32: Remove useless config option "GENERIC_BUST_SPINLOCK".
  [AVR32] Optimize the TLB miss handler
  [AVR32] Board code for ATNGW100
  [AVR32] Use memcpy/memset in memcpy_{from,to}_io and memset_io
  [AVR32] Get rid of board_setup_fbmem()
  [AVR32] Reserve framebuffer memory in early_parse_fbmem()
  [AVR32] Simplify early handling of memory regions
  [AVR32] Move setup_bootmem() from mm/init.c to kernel/setup.c
  [AVR32] Make I/O access macros work with external devices
  [AVR32] Fix NMI handler
  [AVR32] Clean up exception handling code
  [AVR32] Clean up cpu identification and add features bitmap
  [AVR32] Clean up asm/sysreg.h
  [AVR32] Don't enable clocks with no users
  [AVR32] Put cpu in sleep 0 when idle.
  [AVR32] Change system timer from count-compare to Timer/Counter 0
  [AVR32] Add mach-specific Kconfig
  [AVR32] Add nwait and tdf parameters to SMC configuration
  ...

Do this really early in the 2.6.22-rc series, so that we'll get
feedback.  And don't change by half measures.  Just cut the default
dirty limit to a quarter of what it was, and see if anybody even
notices.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Stacktrace support on MIPS doesn't use frame pointers.  Since this option
considerably increases the size of the kernel code, force lockdep to not
use it.
Signed-off-by: NFranck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch has updated vr41xx/Kconfig.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch has removed 2 select entries for VR41xx.
These entries are selected in arch/mips/vr41xx/Kconfig.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch has renamed VR41XX to VR4100 series.
That's better.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NMilind Arun Choudhary <milindchoudhary@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

[Robert's original log message said this was a bug but it isn't, it's
just very old fashioned syntax that is not (no longer?) documented in the
gcc documentation.  So for the sake of uniformity I'm applying his
patch but with a modified log message. -- Ralf]
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

PCI host bridge setup for SNI RM machines with PCI is quite broken, now
that Linux does it's resource setup own its own. It will use IO addresses,
which are needed by the EISA config detection and assigns PCI memory
addresses, which overlap with ISA legacy addresses (video ram). Below
is a patch, which changes the way how the PCI memory addresses are
used and sets the minimum IO address to give enough IO space for
8 EISA slots). This patch needs the other PCI resource change, I've
posted.
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

PCI based SNI RM machines have their EISA bus behind an Intel PCI/EISA
bridge. So the PCI IO range must start at 0x0000. Changing that will
break the PCI bus, because i8259.c already has registered it's IO
addresses before the PCI bus gets initialized. Below is a patch,
which will register the PCI host bridge resources inside
register_pci_controller(). It also changes i8259.c to use insert_region(),
because request_resource() will fail, if the IO space of the PIT hanging
of the PCI host bridge (maybe passing the resource parent to
init_i8259_irqs() is a cleaner fix for that).
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>