Merge branch 'for-linus' of git://git.infradead.org/ubi-2.6

* 'for-linus' of git://git.infradead.org/ubi-2.6:
  UBI: remove unused variable
  UBI: add me to MAINTAINERS
  JFFS2: add UBI support
  UBI: Unsorted Block Images

MAINTAINERS

@@ -2246,6 +2246,14 @@ L:	linux-mtd@lists.infradead.org
 T:	git git://git.infradead.org/mtd-2.6.git
 S:	Maintained
 
+UNSORTED BLOCK IMAGES (UBI)
+P:	Artem Bityutskiy
+M:	dedekind@infradead.org
+W:	http://www.linux-mtd.infradead.org/
+L:	linux-mtd@lists.infradead.org
+T:	git git://git.infradead.org/ubi-2.6.git
+S:	Maintained
+
 MICROTEK X6 SCANNER
 P:	Oliver Neukum
 M:	oliver@neukum.name

drivers/mtd/Kconfig

@@ -292,5 +292,7 @@ source "drivers/mtd/nand/Kconfig"
 
 source "drivers/mtd/onenand/Kconfig"
 
+source "drivers/mtd/ubi/Kconfig"
+
 endmenu
 

drivers/mtd/Makefile

@@ -28,3 +28,5 @@ nftl-objs		:= nftlcore.o nftlmount.o
 inftl-objs		:= inftlcore.o inftlmount.o
 
 obj-y		+= chips/ maps/ devices/ nand/ onenand/
+
+obj-$(CONFIG_MTD_UBI)		+= ubi/

drivers/mtd/ubi/Kconfig

+# drivers/mtd/ubi/Kconfig
+
+menu "UBI - Unsorted block images"
+	depends on MTD
+
+config MTD_UBI
+	tristate "Enable UBI"
+	depends on MTD
+	select CRC32
+	help
+	  UBI is a software layer above MTD layer which admits of LVM-like
+	  logical volumes on top of MTD devices, hides some complexities of
+	  flash chips like wear and bad blocks and provides some other useful
+	  capabilities. Please, consult the MTD web site for more details
+	  (www.linux-mtd.infradead.org).
+
+config MTD_UBI_WL_THRESHOLD
+	int "UBI wear-leveling threshold"
+	default 4096
+	range 2 65536
+	depends on MTD_UBI
+	help
+	  This parameter defines the maximum difference between the highest
+	  erase counter value and the lowest erase counter value of eraseblocks
+	  of UBI devices. When this threshold is exceeded, UBI starts performing
+	  wear leveling by means of moving data from eraseblock with low erase
+	  counter to eraseblocks with high erase counter. Leave the default
+	  value if unsure.
+
+config MTD_UBI_BEB_RESERVE
+	int "Percentage of reserved eraseblocks for bad eraseblocks handling"
+	default 1
+	range 0 25
+	depends on MTD_UBI
+	help
+	  If the MTD device admits of bad eraseblocks (e.g. NAND flash), UBI
+	  reserves some amount of physical eraseblocks to handle new bad
+	  eraseblocks. For example, if a flash physical eraseblock becomes bad,
+	  UBI uses these reserved physical eraseblocks to relocate the bad one.
+	  This option specifies how many physical eraseblocks will be reserved
+	  for bad eraseblock handling (percents of total number of good flash
+	  eraseblocks). If the underlying flash does not admit of bad
+	  eraseblocks (e.g. NOR flash), this value is ignored and nothing is
+	  reserved. Leave the default value if unsure.
+
+config MTD_UBI_GLUEBI
+	bool "Emulate MTD devices"
+	default n
+	depends on MTD_UBI
+	help
+	   This option enables MTD devices emulation on top of UBI volumes: for
+	   each UBI volumes an MTD device is created, and all I/O to this MTD
+	   device is redirected to the UBI volume. This is handy to make
+	   MTD-oriented software (like JFFS2) work on top of UBI. Do not enable
+	   this if no legacy software will be used.
+
+source "drivers/mtd/ubi/Kconfig.debug"
+endmenu

drivers/mtd/ubi/Kconfig.debug

+comment "UBI debugging options"
+	depends on MTD_UBI
+
+config MTD_UBI_DEBUG
+	bool "UBI debugging"
+	depends on SYSFS
+	depends on MTD_UBI
+	select DEBUG_FS
+	select KALLSYMS_ALL
+	help
+	  This option enables UBI debugging.
+
+config MTD_UBI_DEBUG_MSG
+	bool "UBI debugging messages"
+	depends on MTD_UBI_DEBUG
+	default n
+	help
+	  This option enables UBI debugging messages.
+
+config MTD_UBI_DEBUG_PARANOID
+	bool "Extra self-checks"
+	default n
+	depends on MTD_UBI_DEBUG
+	help
+	  This option enables extra checks in UBI code. Note this slows UBI down
+	  significantly.
+
+config MTD_UBI_DEBUG_DISABLE_BGT
+	bool "Do not enable the UBI background thread"
+	depends on MTD_UBI_DEBUG
+	default n
+	help
+	  This option switches the background thread off by default. The thread
+	  may be also be enabled/disabled via UBI sysfs.
+
+config MTD_UBI_DEBUG_USERSPACE_IO
+	bool "Direct user-space write/erase support"
+	default n
+	depends on MTD_UBI_DEBUG
+	help
+	  By default, users cannot directly write and erase individual
+	  eraseblocks of dynamic volumes, and have to use update operation
+	  instead. This option enables this capability - it is very useful for
+	  debugging and testing.
+
+config MTD_UBI_DEBUG_EMULATE_BITFLIPS
+	bool "Emulate flash bit-flips"
+	depends on MTD_UBI_DEBUG
+	default n
+	help
+	  This option emulates bit-flips with probability 1/50, which in turn
+	  causes scrubbing. Useful for debugging and stressing UBI.
+
+config MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES
+	bool "Emulate flash write failures"
+	depends on MTD_UBI_DEBUG
+	default n
+	help
+	  This option emulates write failures with probability 1/100. Useful for
+	  debugging and testing how UBI handlines errors.
+
+config MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES
+	bool "Emulate flash erase failures"
+	depends on MTD_UBI_DEBUG
+	default n
+	help
+	  This option emulates erase failures with probability 1/100. Useful for
+	  debugging and testing how UBI handlines errors.
+
+menu "Additional UBI debugging messages"
+	depends on MTD_UBI_DEBUG
+
+config MTD_UBI_DEBUG_MSG_BLD
+	bool "Additional UBI initialization and build messages"
+	default n
+	depends on MTD_UBI_DEBUG
+	help
+	  This option enables detailed UBI initialization and device build
+	  debugging messages.
+
+config MTD_UBI_DEBUG_MSG_EBA
+	bool "Eraseblock association unit messages"
+	default n
+	depends on MTD_UBI_DEBUG
+	help
+	  This option enables debugging messages from the UBI eraseblock
+	  association unit.
+
+config MTD_UBI_DEBUG_MSG_WL
+	bool "Wear-leveling unit messages"
+	default n
+	depends on MTD_UBI_DEBUG
+	help
+	  This option enables debugging messages from the UBI wear-leveling
+	  unit.
+
+config MTD_UBI_DEBUG_MSG_IO
+	bool "Input/output unit messages"
+	default n
+	depends on MTD_UBI_DEBUG
+	help
+	  This option enables debugging messages from the UBI input/output unit.
+
+endmenu # UBI debugging messages

drivers/mtd/ubi/Makefile

+obj-$(CONFIG_MTD_UBI) += ubi.o
+
+ubi-y += vtbl.o vmt.o upd.o build.o cdev.o kapi.o eba.o io.o wl.o scan.o
+ubi-y += misc.o
+
+ubi-$(CONFIG_MTD_UBI_DEBUG) += debug.o
+ubi-$(CONFIG_MTD_UBI_GLUEBI) += gluebi.o

drivers/mtd/ubi/cdev.c

+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий Артём)
+ */
+
+/*
+ * This file includes implementation of UBI character device operations.
+ *
+ * There are two kinds of character devices in UBI: UBI character devices and
+ * UBI volume character devices. UBI character devices allow users to
+ * manipulate whole volumes: create, remove, and re-size them. Volume character
+ * devices provide volume I/O capabilities.
+ *
+ * Major and minor numbers are assigned dynamically to both UBI and volume
+ * character devices.
+ */
+
+#include <linux/module.h>
+#include <linux/stat.h>
+#include <linux/ioctl.h>
+#include <linux/capability.h>
+#include <mtd/ubi-user.h>
+#include <asm/uaccess.h>
+#include <asm/div64.h>
+#include "ubi.h"
+
+/*
+ * Maximum sequence numbers of UBI and volume character device IOCTLs (direct
+ * logical eraseblock erase is a debug-only feature).
+ */
+#define UBI_CDEV_IOC_MAX_SEQ 2
+#ifndef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO
+#define VOL_CDEV_IOC_MAX_SEQ 1
+#else
+#define VOL_CDEV_IOC_MAX_SEQ 2
+#endif
+
+/**
+ * major_to_device - get UBI device object by character device major number.
+ * @major: major number
+ *
+ * This function returns a pointer to the UBI device object.
+ */
+static struct ubi_device *major_to_device(int major)
+{
+	int i;
+
+	for (i = 0; i < ubi_devices_cnt; i++)
+		if (ubi_devices[i] && ubi_devices[i]->major == major)
+			return ubi_devices[i];
+	BUG();
+}
+
+/**
+ * get_exclusive - get exclusive access to an UBI volume.
+ * @desc: volume descriptor
+ *
+ * This function changes UBI volume open mode to "exclusive". Returns previous
+ * mode value (positive integer) in case of success and a negative error code
+ * in case of failure.
+ */
+static int get_exclusive(struct ubi_volume_desc *desc)
+{
+	int users, err;
+	struct ubi_volume *vol = desc->vol;
+
+	spin_lock(&vol->ubi->volumes_lock);
+	users = vol->readers + vol->writers + vol->exclusive;
+	ubi_assert(users > 0);
+	if (users > 1) {
+		dbg_err("%d users for volume %d", users, vol->vol_id);
+		err = -EBUSY;
+	} else {
+		vol->readers = vol->writers = 0;
+		vol->exclusive = 1;
+		err = desc->mode;
+		desc->mode = UBI_EXCLUSIVE;
+	}
+	spin_unlock(&vol->ubi->volumes_lock);
+
+	return err;
+}
+
+/**
+ * revoke_exclusive - revoke exclusive mode.
+ * @desc: volume descriptor
+ * @mode: new mode to switch to
+ */
+static void revoke_exclusive(struct ubi_volume_desc *desc, int mode)
+{
+	struct ubi_volume *vol = desc->vol;
+
+	spin_lock(&vol->ubi->volumes_lock);
+	ubi_assert(vol->readers == 0 && vol->writers == 0);
+	ubi_assert(vol->exclusive == 1 && desc->mode == UBI_EXCLUSIVE);
+	vol->exclusive = 0;
+	if (mode == UBI_READONLY)
+		vol->readers = 1;
+	else if (mode == UBI_READWRITE)
+		vol->writers = 1;
+	else
+		vol->exclusive = 1;
+	spin_unlock(&vol->ubi->volumes_lock);
+
+	desc->mode = mode;
+}
+
+static int vol_cdev_open(struct inode *inode, struct file *file)
+{
+	struct ubi_volume_desc *desc;
+	const struct ubi_device *ubi = major_to_device(imajor(inode));
+	int vol_id = iminor(inode) - 1;
+	int mode;
+
+	if (file->f_mode & FMODE_WRITE)
+		mode = UBI_READWRITE;
+	else
+		mode = UBI_READONLY;
+
+	dbg_msg("open volume %d, mode %d", vol_id, mode);
+
+	desc = ubi_open_volume(ubi->ubi_num, vol_id, mode);
+	if (IS_ERR(desc))
+		return PTR_ERR(desc);
+
+	file->private_data = desc;
+	return 0;
+}
+
+static int vol_cdev_release(struct inode *inode, struct file *file)
+{
+	struct ubi_volume_desc *desc = file->private_data;
+	struct ubi_volume *vol = desc->vol;
+
+	dbg_msg("release volume %d, mode %d", vol->vol_id, desc->mode);
+
+	if (vol->updating) {
+		ubi_warn("update of volume %d not finished, volume is damaged",
+			 vol->vol_id);
+		vol->updating = 0;
+		kfree(vol->upd_buf);
+	}
+
+	ubi_close_volume(desc);
+	return 0;
+}
+
+static loff_t vol_cdev_llseek(struct file *file, loff_t offset, int origin)
+{
+	struct ubi_volume_desc *desc = file->private_data;
+	struct ubi_volume *vol = desc->vol;
+	loff_t new_offset;
+
+	if (vol->updating) {
+		 /* Update is in progress, seeking is prohibited */
+		dbg_err("updating");
+		return -EBUSY;
+	}
+
+	switch (origin) {
+	case 0: /* SEEK_SET */
+		new_offset = offset;
+		break;
+	case 1: /* SEEK_CUR */
+		new_offset = file->f_pos + offset;
+		break;
+	case 2: /* SEEK_END */
+		new_offset = vol->used_bytes + offset;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (new_offset < 0 || new_offset > vol->used_bytes) {
+		dbg_err("bad seek %lld", new_offset);
+		return -EINVAL;
+	}
+
+	dbg_msg("seek volume %d, offset %lld, origin %d, new offset %lld",
+		vol->vol_id, offset, origin, new_offset);
+
+	file->f_pos = new_offset;
+	return new_offset;
+}
+
+static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count,
+			     loff_t *offp)
+{
+	struct ubi_volume_desc *desc = file->private_data;
+	struct ubi_volume *vol = desc->vol;
+	struct ubi_device *ubi = vol->ubi;
+	int err, lnum, off, len,  vol_id = desc->vol->vol_id, tbuf_size;
+	size_t count_save = count;
+	void *tbuf;
+	uint64_t tmp;
+
+	dbg_msg("read %zd bytes from offset %lld of volume %d",
+		count, *offp, vol_id);
+
+	if (vol->updating) {
+		dbg_err("updating");
+		return -EBUSY;
+	}
+	if (vol->upd_marker) {
+		dbg_err("damaged volume, update marker is set");
+		return -EBADF;
+	}
+	if (*offp == vol->used_bytes || count == 0)
+		return 0;
+
+	if (vol->corrupted)
+		dbg_msg("read from corrupted volume %d", vol_id);
+
+	if (*offp + count > vol->used_bytes)
+		count_save = count = vol->used_bytes - *offp;
+
+	tbuf_size = vol->usable_leb_size;
+	if (count < tbuf_size)
+		tbuf_size = ALIGN(count, ubi->min_io_size);
+	tbuf = kmalloc(tbuf_size, GFP_KERNEL);
+	if (!tbuf)
+		return -ENOMEM;
+
+	len = count > tbuf_size ? tbuf_size : count;
+
+	tmp = *offp;
+	off = do_div(tmp, vol->usable_leb_size);
+	lnum = tmp;
+
+	do {
+		cond_resched();
+
+		if (off + len >= vol->usable_leb_size)
+			len = vol->usable_leb_size - off;
+
+		err = ubi_eba_read_leb(ubi, vol_id, lnum, tbuf, off, len, 0);
+		if (err)
+			break;
+
+		off += len;
+		if (off == vol->usable_leb_size) {
+			lnum += 1;
+			off -= vol->usable_leb_size;
+		}
+
+		count -= len;
+		*offp += len;
+
+		err = copy_to_user(buf, tbuf, len);
+		if (err) {
+			err = -EFAULT;
+			break;
+		}
+
+		buf += len;
+		len = count > tbuf_size ? tbuf_size : count;
+	} while (count);
+
+	kfree(tbuf);
+	return err ? err : count_save - count;
+}
+
+#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO
+
+/*
+ * This function allows to directly write to dynamic UBI volumes, without
+ * issuing the volume update operation. Available only as a debugging feature.
+ * Very useful for testing UBI.
+ */
+static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf,
+				     size_t count, loff_t *offp)
+{
+	struct ubi_volume_desc *desc = file->private_data;
+	struct ubi_volume *vol = desc->vol;
+	struct ubi_device *ubi = vol->ubi;
+	int lnum, off, len, tbuf_size, vol_id = vol->vol_id, err = 0;
+	size_t count_save = count;
+	char *tbuf;
+	uint64_t tmp;
+
+	dbg_msg("requested: write %zd bytes to offset %lld of volume %u",
+		count, *offp, desc->vol->vol_id);
+
+	if (vol->vol_type == UBI_STATIC_VOLUME)
+		return -EROFS;
+
+	tmp = *offp;
+	off = do_div(tmp, vol->usable_leb_size);
+	lnum = tmp;
+
+	if (off % ubi->min_io_size) {
+		dbg_err("unaligned position");
+		return -EINVAL;
+	}
+
+	if (*offp + count > vol->used_bytes)
+		count_save = count = vol->used_bytes - *offp;
+
+	/* We can write only in fractions of the minimum I/O unit */
+	if (count % ubi->min_io_size) {
+		dbg_err("unaligned write length");
+		return -EINVAL;
+	}
+
+	tbuf_size = vol->usable_leb_size;
+	if (count < tbuf_size)
+		tbuf_size = ALIGN(count, ubi->min_io_size);
+	tbuf = kmalloc(tbuf_size, GFP_KERNEL);
+	if (!tbuf)
+		return -ENOMEM;
+
+	len = count > tbuf_size ? tbuf_size : count;
+
+	while (count) {
+		cond_resched();
+
+		if (off + len >= vol->usable_leb_size)
+			len = vol->usable_leb_size - off;
+
+		err = copy_from_user(tbuf, buf, len);
+		if (err) {
+			err = -EFAULT;
+			break;
+		}
+
+		err = ubi_eba_write_leb(ubi, vol_id, lnum, tbuf, off, len,
+					UBI_UNKNOWN);
+		if (err)
+			break;
+
+		off += len;
+		if (off == vol->usable_leb_size) {
+			lnum += 1;
+			off -= vol->usable_leb_size;
+		}
+
+		count -= len;
+		*offp += len;
+		buf += len;
+		len = count > tbuf_size ? tbuf_size : count;
+	}
+
+	kfree(tbuf);
+	return err ? err : count_save - count;
+}
+
+#else
+#define vol_cdev_direct_write(file, buf, count, offp) -EPERM
+#endif /* CONFIG_MTD_UBI_DEBUG_USERSPACE_IO */
+
+static ssize_t vol_cdev_write(struct file *file, const char __user *buf,
+			      size_t count, loff_t *offp)
+{
+	int err = 0;
+	struct ubi_volume_desc *desc = file->private_data;
+	struct ubi_volume *vol = desc->vol;
+	struct ubi_device *ubi = vol->ubi;
+
+	if (!vol->updating)
+		return vol_cdev_direct_write(file, buf, count, offp);
+
+	err = ubi_more_update_data(ubi, vol->vol_id, buf, count);
+	if (err < 0) {
+		ubi_err("cannot write %zd bytes of update data", count);
+		return err;
+	}
+
+	if (err) {
+		/*
+		 * Update is finished, @err contains number of actually written
+		 * bytes now.
+		 */
+		count = err;
+
+		err = ubi_check_volume(ubi, vol->vol_id);
+		if (err < 0)
+			return err;
+
+		if (err) {
+			ubi_warn("volume %d on UBI device %d is corrupted",
+				 vol->vol_id, ubi->ubi_num);
+			vol->corrupted = 1;
+		}
+		vol->checked = 1;
+		revoke_exclusive(desc, UBI_READWRITE);
+	}
+
+	*offp += count;
+	return count;
+}
+
+static int vol_cdev_ioctl(struct inode *inode, struct file *file,
+			  unsigned int cmd, unsigned long arg)
+{
+	int err = 0;
+	struct ubi_volume_desc *desc = file->private_data;
+	struct ubi_volume *vol = desc->vol;
+	struct ubi_device *ubi = vol->ubi;
+	void __user *argp = (void __user *)arg;
+
+	if (_IOC_NR(cmd) > VOL_CDEV_IOC_MAX_SEQ ||
+	    _IOC_TYPE(cmd) != UBI_VOL_IOC_MAGIC)
+		return -ENOTTY;
+
+	if (_IOC_DIR(cmd) && _IOC_READ)
+		err = !access_ok(VERIFY_WRITE, argp, _IOC_SIZE(cmd));
+	else if (_IOC_DIR(cmd) && _IOC_WRITE)
+		err = !access_ok(VERIFY_READ, argp, _IOC_SIZE(cmd));
+	if (err)
+		return -EFAULT;
+
+	switch (cmd) {
+
+	/* Volume update command */
+	case UBI_IOCVOLUP:
+	{
+		int64_t bytes, rsvd_bytes;
+
+		if (!capable(CAP_SYS_RESOURCE)) {
+			err = -EPERM;
+			break;
+		}
+
+		err = copy_from_user(&bytes, argp, sizeof(int64_t));
+		if (err) {
+			err = -EFAULT;
+			break;
+		}
+
+		if (desc->mode == UBI_READONLY) {
+			err = -EROFS;
+			break;
+		}
+
+		rsvd_bytes = vol->reserved_pebs * (ubi->leb_size-vol->data_pad);
+		if (bytes < 0 || bytes > rsvd_bytes) {
+			err = -EINVAL;
+			break;
+		}
+
+		err = get_exclusive(desc);
+		if (err < 0)
+			break;
+
+		err = ubi_start_update(ubi, vol->vol_id, bytes);
+		if (bytes == 0)
+			revoke_exclusive(desc, UBI_READWRITE);
+
+		file->f_pos = 0;
+		break;
+	}
+
+#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO
+	/* Logical eraseblock erasure command */
+	case UBI_IOCEBER:
+	{
+		int32_t lnum;
+
+		err = __get_user(lnum, (__user int32_t *)argp);
+		if (err) {
+			err = -EFAULT;
+			break;
+		}
+
+		if (desc->mode == UBI_READONLY) {
+			err = -EROFS;
+			break;
+		}
+
+		if (lnum < 0 || lnum >= vol->reserved_pebs) {
+			err = -EINVAL;
+			break;
+		}
+
+		if (vol->vol_type != UBI_DYNAMIC_VOLUME) {
+			err = -EROFS;
+			break;
+		}
+
+		dbg_msg("erase LEB %d:%d", vol->vol_id, lnum);
+		err = ubi_eba_unmap_leb(ubi, vol->vol_id, lnum);
+		if (err)
+			break;
+
+		err = ubi_wl_flush(ubi);
+		break;
+	}
+#endif
+
+	default:
+		err = -ENOTTY;
+		break;
+	}
+
+	return err;
+}
+
+/**
+ * verify_mkvol_req - verify volume creation request.
+ * @ubi: UBI device description object
+ * @req: the request to check
+ *
+ * This function zero if the request is correct, and %-EINVAL if not.
+ */
+static int verify_mkvol_req(const struct ubi_device *ubi,
+			    const struct ubi_mkvol_req *req)
+{
+	int n, err = -EINVAL;
+
+	if (req->bytes < 0 || req->alignment < 0 || req->vol_type < 0 ||
+	    req->name_len < 0)
+		goto bad;
+
+	if ((req->vol_id < 0 || req->vol_id >= ubi->vtbl_slots) &&
+	    req->vol_id != UBI_VOL_NUM_AUTO)
+		goto bad;
+
+	if (req->alignment == 0)
+		goto bad;
+
+	if (req->bytes == 0)
+		goto bad;
+
+	if (req->vol_type != UBI_DYNAMIC_VOLUME &&
+	    req->vol_type != UBI_STATIC_VOLUME)
+		goto bad;
+
+	if (req->alignment > ubi->leb_size)
+		goto bad;
+
+	n = req->alignment % ubi->min_io_size;
+	if (req->alignment != 1 && n)
+		goto bad;
+
+	if (req->name_len > UBI_VOL_NAME_MAX) {
+		err = -ENAMETOOLONG;
+		goto bad;
+	}
+
+	return 0;
+
+bad:
+	dbg_err("bad volume creation request");
+	ubi_dbg_dump_mkvol_req(req);
+	return err;
+}
+
+/**
+ * verify_rsvol_req - verify volume re-size request.
+ * @ubi: UBI device description object
+ * @req: the request to check
+ *
+ * This function returns zero if the request is correct, and %-EINVAL if not.
+ */
+static int verify_rsvol_req(const struct ubi_device *ubi,
+			    const struct ubi_rsvol_req *req)
+{
+	if (req->bytes <= 0)
+		return -EINVAL;
+
+	if (req->vol_id < 0 || req->vol_id >= ubi->vtbl_slots)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int ubi_cdev_ioctl(struct inode *inode, struct file *file,
+			  unsigned int cmd, unsigned long arg)
+{
+	int err = 0;
+	struct ubi_device *ubi;
+	struct ubi_volume_desc *desc;
+	void __user *argp = (void __user *)arg;
+
+	if (_IOC_NR(cmd) > UBI_CDEV_IOC_MAX_SEQ ||
+	    _IOC_TYPE(cmd) != UBI_IOC_MAGIC)
+		return -ENOTTY;
+
+	if (_IOC_DIR(cmd) && _IOC_READ)
+		err = !access_ok(VERIFY_WRITE, argp, _IOC_SIZE(cmd));
+	else if (_IOC_DIR(cmd) && _IOC_WRITE)
+		err = !access_ok(VERIFY_READ, argp, _IOC_SIZE(cmd));
+	if (err)
+		return -EFAULT;
+
+	if (!capable(CAP_SYS_RESOURCE))
+		return -EPERM;
+
+	ubi = major_to_device(imajor(inode));
+	if (IS_ERR(ubi))
+		return PTR_ERR(ubi);
+
+	switch (cmd) {
+	/* Create volume command */
+	case UBI_IOCMKVOL:
+	{
+		struct ubi_mkvol_req req;
+
+		dbg_msg("create volume");
+		err = __copy_from_user(&req, argp,
+				       sizeof(struct ubi_mkvol_req));
+		if (err) {
+			err = -EFAULT;
+			break;
+		}
+
+		err = verify_mkvol_req(ubi, &req);
+		if (err)
+			break;
+
+		req.name[req.name_len] = '\0';
+
+		err = ubi_create_volume(ubi, &req);
+		if (err)
+			break;
+
+		err = __put_user(req.vol_id, (__user int32_t *)argp);
+		if (err)
+			err = -EFAULT;
+
+		break;
+	}
+
+	/* Remove volume command */
+	case UBI_IOCRMVOL:
+	{
+		int vol_id;
+
+		dbg_msg("remove volume");
+		err = __get_user(vol_id, (__user int32_t *)argp);
+		if (err) {
+			err = -EFAULT;
+			break;
+		}
+
+		desc = ubi_open_volume(ubi->ubi_num, vol_id, UBI_EXCLUSIVE);
+		if (IS_ERR(desc)) {
+			err = PTR_ERR(desc);
+			break;
+		}
+
+		err = ubi_remove_volume(desc);
+		if (err)
+			ubi_close_volume(desc);
+
+		break;
+	}
+
+	/* Re-size volume command */
+	case UBI_IOCRSVOL:
+	{
+		int pebs;
+		uint64_t tmp;
+		struct ubi_rsvol_req req;
+
+		dbg_msg("re-size volume");
+		err = __copy_from_user(&req, argp,
+				       sizeof(struct ubi_rsvol_req));
+		if (err) {
+			err = -EFAULT;
+			break;
+		}
+
+		err = verify_rsvol_req(ubi, &req);
+		if (err)
+			break;
+
+		desc = ubi_open_volume(ubi->ubi_num, req.vol_id, UBI_EXCLUSIVE);
+		if (IS_ERR(desc)) {
+			err = PTR_ERR(desc);
+			break;
+		}
+
+		tmp = req.bytes;
+		pebs = !!do_div(tmp, desc->vol->usable_leb_size);
+		pebs += tmp;
+
+		err = ubi_resize_volume(desc, pebs);
+		ubi_close_volume(desc);
+		break;
+	}
+
+	default:
+		err = -ENOTTY;
+		break;
+	}
+
+	return err;
+}
+
+/* UBI character device operations */
+struct file_operations ubi_cdev_operations = {
+	.owner = THIS_MODULE,
+	.ioctl = ubi_cdev_ioctl,
+	.llseek = no_llseek
+};
+
+/* UBI volume character device operations */
+struct file_operations ubi_vol_cdev_operations = {
+	.owner   = THIS_MODULE,
+	.open    = vol_cdev_open,
+	.release = vol_cdev_release,
+	.llseek  = vol_cdev_llseek,
+	.read    = vol_cdev_read,
+	.write   = vol_cdev_write,
+	.ioctl   = vol_cdev_ioctl
+};

drivers/mtd/ubi/debug.c

+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий Артём)
+ */
+
+/*
+ * Here we keep all the UBI debugging stuff which should normally be disabled
+ * and compiled-out, but it is extremely helpful when hunting bugs or doing big
+ * changes.
+ */
+
+#ifdef CONFIG_MTD_UBI_DEBUG_MSG
+
+#include "ubi.h"
+
+/**
+ * ubi_dbg_dump_ec_hdr - dump an erase counter header.
+ * @ec_hdr: the erase counter header to dump
+ */
+void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr)
+{
+	dbg_msg("erase counter header dump:");
+	dbg_msg("magic          %#08x", ubi32_to_cpu(ec_hdr->magic));
+	dbg_msg("version        %d",    (int)ec_hdr->version);
+	dbg_msg("ec             %llu",  (long long)ubi64_to_cpu(ec_hdr->ec));
+	dbg_msg("vid_hdr_offset %d",    ubi32_to_cpu(ec_hdr->vid_hdr_offset));
+	dbg_msg("data_offset    %d",    ubi32_to_cpu(ec_hdr->data_offset));
+	dbg_msg("hdr_crc        %#08x", ubi32_to_cpu(ec_hdr->hdr_crc));
+	dbg_msg("erase counter header hexdump:");
+	ubi_dbg_hexdump(ec_hdr, UBI_EC_HDR_SIZE);
+}
+
+/**
+ * ubi_dbg_dump_vid_hdr - dump a volume identifier header.
+ * @vid_hdr: the volume identifier header to dump
+ */
+void ubi_dbg_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr)
+{
+	dbg_msg("volume identifier header dump:");
+	dbg_msg("magic     %08x", ubi32_to_cpu(vid_hdr->magic));
+	dbg_msg("version   %d",   (int)vid_hdr->version);
+	dbg_msg("vol_type  %d",   (int)vid_hdr->vol_type);
+	dbg_msg("copy_flag %d",   (int)vid_hdr->copy_flag);
+	dbg_msg("compat    %d",   (int)vid_hdr->compat);
+	dbg_msg("vol_id    %d",   ubi32_to_cpu(vid_hdr->vol_id));
+	dbg_msg("lnum      %d",   ubi32_to_cpu(vid_hdr->lnum));
+	dbg_msg("leb_ver   %u",   ubi32_to_cpu(vid_hdr->leb_ver));
+	dbg_msg("data_size %d",   ubi32_to_cpu(vid_hdr->data_size));
+	dbg_msg("used_ebs  %d",   ubi32_to_cpu(vid_hdr->used_ebs));
+	dbg_msg("data_pad  %d",   ubi32_to_cpu(vid_hdr->data_pad));
+	dbg_msg("sqnum     %llu",
+		(unsigned long long)ubi64_to_cpu(vid_hdr->sqnum));
+	dbg_msg("hdr_crc   %08x", ubi32_to_cpu(vid_hdr->hdr_crc));
+	dbg_msg("volume identifier header hexdump:");
+}
+
+/**
+ * ubi_dbg_dump_vol_info- dump volume information.
+ * @vol: UBI volume description object
+ */
+void ubi_dbg_dump_vol_info(const struct ubi_volume *vol)
+{
+	dbg_msg("volume information dump:");
+	dbg_msg("vol_id          %d", vol->vol_id);
+	dbg_msg("reserved_pebs   %d", vol->reserved_pebs);
+	dbg_msg("alignment       %d", vol->alignment);
+	dbg_msg("data_pad        %d", vol->data_pad);
+	dbg_msg("vol_type        %d", vol->vol_type);
+	dbg_msg("name_len        %d", vol->name_len);
+	dbg_msg("usable_leb_size %d", vol->usable_leb_size);
+	dbg_msg("used_ebs        %d", vol->used_ebs);
+	dbg_msg("used_bytes      %lld", vol->used_bytes);
+	dbg_msg("last_eb_bytes   %d", vol->last_eb_bytes);
+	dbg_msg("corrupted       %d", vol->corrupted);
+	dbg_msg("upd_marker      %d", vol->upd_marker);
+
+	if (vol->name_len <= UBI_VOL_NAME_MAX &&
+	    strnlen(vol->name, vol->name_len + 1) == vol->name_len) {
+		dbg_msg("name          %s", vol->name);
+	} else {
+		dbg_msg("the 1st 5 characters of the name: %c%c%c%c%c",
+			vol->name[0], vol->name[1], vol->name[2],
+			vol->name[3], vol->name[4]);
+	}
+}
+
+/**
+ * ubi_dbg_dump_vtbl_record - dump a &struct ubi_vtbl_record object.
+ * @r: the object to dump
+ * @idx: volume table index
+ */
+void ubi_dbg_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx)
+{
+	int name_len = ubi16_to_cpu(r->name_len);
+
+	dbg_msg("volume table record %d dump:", idx);
+	dbg_msg("reserved_pebs   %d", ubi32_to_cpu(r->reserved_pebs));
+	dbg_msg("alignment       %d", ubi32_to_cpu(r->alignment));
+	dbg_msg("data_pad        %d", ubi32_to_cpu(r->data_pad));
+	dbg_msg("vol_type        %d", (int)r->vol_type);
+	dbg_msg("upd_marker      %d", (int)r->upd_marker);
+	dbg_msg("name_len        %d", name_len);
+
+	if (r->name[0] == '\0') {
+		dbg_msg("name          NULL");
+		return;
+	}
+
+	if (name_len <= UBI_VOL_NAME_MAX &&
+	    strnlen(&r->name[0], name_len + 1) == name_len) {
+		dbg_msg("name          %s", &r->name[0]);
+	} else {
+		dbg_msg("1st 5 characters of the name: %c%c%c%c%c",
+			r->name[0], r->name[1], r->name[2], r->name[3],
+			r->name[4]);
+	}
+	dbg_msg("crc             %#08x", ubi32_to_cpu(r->crc));
+}
+
+/**
+ * ubi_dbg_dump_sv - dump a &struct ubi_scan_volume object.
+ * @sv: the object to dump
+ */
+void ubi_dbg_dump_sv(const struct ubi_scan_volume *sv)
+{
+	dbg_msg("volume scanning information dump:");
+	dbg_msg("vol_id         %d", sv->vol_id);
+	dbg_msg("highest_lnum   %d", sv->highest_lnum);
+	dbg_msg("leb_count      %d", sv->leb_count);
+	dbg_msg("compat         %d", sv->compat);
+	dbg_msg("vol_type       %d", sv->vol_type);
+	dbg_msg("used_ebs       %d", sv->used_ebs);
+	dbg_msg("last_data_size %d", sv->last_data_size);
+	dbg_msg("data_pad       %d", sv->data_pad);
+}
+
+/**
+ * ubi_dbg_dump_seb - dump a &struct ubi_scan_leb object.
+ * @seb: the object to dump
+ * @type: object type: 0 - not corrupted, 1 - corrupted
+ */
+void ubi_dbg_dump_seb(const struct ubi_scan_leb *seb, int type)
+{
+	dbg_msg("eraseblock scanning information dump:");
+	dbg_msg("ec       %d", seb->ec);
+	dbg_msg("pnum     %d", seb->pnum);
+	if (type == 0) {
+		dbg_msg("lnum     %d", seb->lnum);
+		dbg_msg("scrub    %d", seb->scrub);
+		dbg_msg("sqnum    %llu", seb->sqnum);
+		dbg_msg("leb_ver  %u", seb->leb_ver);
+	}
+}
+
+/**
+ * ubi_dbg_dump_mkvol_req - dump a &struct ubi_mkvol_req object.
+ * @req: the object to dump
+ */
+void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req)
+{
+	char nm[17];
+
+	dbg_msg("volume creation request dump:");
+	dbg_msg("vol_id    %d",   req->vol_id);
+	dbg_msg("alignment %d",   req->alignment);
+	dbg_msg("bytes     %lld", (long long)req->bytes);
+	dbg_msg("vol_type  %d",   req->vol_type);
+	dbg_msg("name_len  %d",   req->name_len);
+
+	memcpy(nm, req->name, 16);
+	nm[16] = 0;
+	dbg_msg("the 1st 16 characters of the name: %s", nm);
+}
+
+#define BYTES_PER_LINE 32
+
+/**
+ * ubi_dbg_hexdump - dump a buffer.
+ * @ptr: the buffer to dump
+ * @size: buffer size which must be multiple of 4 bytes
+ */
+void ubi_dbg_hexdump(const void *ptr, int size)
+{
+	int i, k = 0, rows, columns;
+	const uint8_t *p = ptr;
+
+	size = ALIGN(size, 4);
+	rows = size/BYTES_PER_LINE + size % BYTES_PER_LINE;
+	for (i = 0; i < rows; i++) {
+		int j;
+
+		cond_resched();
+		columns = min(size - k, BYTES_PER_LINE) / 4;
+		if (columns == 0)
+			break;
+		printk(KERN_DEBUG "%5d:  ", i * BYTES_PER_LINE);
+		for (j = 0; j < columns; j++) {
+			int n, N;
+
+			N = size - k > 4 ? 4 : size - k;
+			for (n = 0; n < N; n++)
+				printk("%02x", p[k++]);
+			printk(" ");
+		}
+		printk("\n");
+	}
+}
+
+#endif /* CONFIG_MTD_UBI_DEBUG_MSG */

drivers/mtd/ubi/debug.h

+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий Артём)
+ */
+
+#ifndef __UBI_DEBUG_H__
+#define __UBI_DEBUG_H__
+
+#ifdef CONFIG_MTD_UBI_DEBUG
+#include <linux/random.h>
+
+#define ubi_assert(expr)  BUG_ON(!(expr))
+#define dbg_err(fmt, ...) ubi_err(fmt, ##__VA_ARGS__)
+#else
+#define ubi_assert(expr)  ({})
+#define dbg_err(fmt, ...) ({})
+#endif
+
+#ifdef CONFIG_MTD_UBI_DEBUG_DISABLE_BGT
+#define DBG_DISABLE_BGT 1
+#else
+#define DBG_DISABLE_BGT 0
+#endif
+
+#ifdef CONFIG_MTD_UBI_DEBUG_MSG
+/* Generic debugging message */
+#define dbg_msg(fmt, ...) \
+	printk(KERN_DEBUG "UBI DBG: %s: " fmt "\n", __FUNCTION__, ##__VA_ARGS__)
+
+#define ubi_dbg_dump_stack() dump_stack()
+
+struct ubi_ec_hdr;
+struct ubi_vid_hdr;
+struct ubi_volume;
+struct ubi_vtbl_record;
+struct ubi_scan_volume;
+struct ubi_scan_leb;
+struct ubi_mkvol_req;
+
+void ubi_dbg_print(int type, const char *func, const char *fmt, ...);
+void ubi_dbg_dump_ec_hdr(const struct ubi_ec_hdr *ec_hdr);
+void ubi_dbg_dump_vid_hdr(const struct ubi_vid_hdr *vid_hdr);
+void ubi_dbg_dump_vol_info(const struct ubi_volume *vol);
+void ubi_dbg_dump_vtbl_record(const struct ubi_vtbl_record *r, int idx);
+void ubi_dbg_dump_sv(const struct ubi_scan_volume *sv);
+void ubi_dbg_dump_seb(const struct ubi_scan_leb *seb, int type);
+void ubi_dbg_dump_mkvol_req(const struct ubi_mkvol_req *req);
+void ubi_dbg_hexdump(const void *buf, int size);
+
+#else
+
+#define dbg_msg(fmt, ...)    ({})
+#define ubi_dbg_dump_stack() ({})
+#define ubi_dbg_print(func, fmt, ...)    ({})
+#define ubi_dbg_dump_ec_hdr(ec_hdr)      ({})
+#define ubi_dbg_dump_vid_hdr(vid_hdr)    ({})
+#define ubi_dbg_dump_vol_info(vol)       ({})
+#define ubi_dbg_dump_vtbl_record(r, idx) ({})
+#define ubi_dbg_dump_sv(sv)              ({})
+#define ubi_dbg_dump_seb(seb, type)      ({})
+#define ubi_dbg_dump_mkvol_req(req)      ({})
+#define ubi_dbg_hexdump(buf, size)       ({})
+
+#endif /* CONFIG_MTD_UBI_DEBUG_MSG */
+
+#ifdef CONFIG_MTD_UBI_DEBUG_MSG_EBA
+/* Messages from the eraseblock association unit */
+#define dbg_eba(fmt, ...) \
+	printk(KERN_DEBUG "UBI DBG eba: %s: " fmt "\n", __FUNCTION__, \
+	       ##__VA_ARGS__)
+#else
+#define dbg_eba(fmt, ...) ({})
+#endif
+
+#ifdef CONFIG_MTD_UBI_DEBUG_MSG_WL
+/* Messages from the wear-leveling unit */
+#define dbg_wl(fmt, ...) \
+	printk(KERN_DEBUG "UBI DBG wl: %s: " fmt "\n", __FUNCTION__, \
+	       ##__VA_ARGS__)
+#else
+#define dbg_wl(fmt, ...) ({})
+#endif
+
+#ifdef CONFIG_MTD_UBI_DEBUG_MSG_IO
+/* Messages from the input/output unit */
+#define dbg_io(fmt, ...) \
+	printk(KERN_DEBUG "UBI DBG io: %s: " fmt "\n", __FUNCTION__, \
+	       ##__VA_ARGS__)
+#else
+#define dbg_io(fmt, ...) ({})
+#endif
+
+#ifdef CONFIG_MTD_UBI_DEBUG_MSG_BLD
+/* Initialization and build messages */
+#define dbg_bld(fmt, ...) \
+	printk(KERN_DEBUG "UBI DBG bld: %s: " fmt "\n", __FUNCTION__, \
+	       ##__VA_ARGS__)
+#else
+#define dbg_bld(fmt, ...) ({})
+#endif
+
+#ifdef CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS
+/**
+ * ubi_dbg_is_bitflip - if it is time to emulate a bit-flip.
+ *
+ * Returns non-zero if a bit-flip should be emulated, otherwise returns zero.
+ */
+static inline int ubi_dbg_is_bitflip(void)
+{
+	return !(random32() % 200);
+}
+#else
+#define ubi_dbg_is_bitflip() 0
+#endif
+
+#ifdef CONFIG_MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES
+/**
+ * ubi_dbg_is_write_failure - if it is time to emulate a write failure.
+ *
+ * Returns non-zero if a write failure should be emulated, otherwise returns
+ * zero.
+ */
+static inline int ubi_dbg_is_write_failure(void)
+{
+	return !(random32() % 500);
+}
+#else
+#define ubi_dbg_is_write_failure() 0
+#endif
+
+#ifdef CONFIG_MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES
+/**
+ * ubi_dbg_is_erase_failure - if its time to emulate an erase failure.
+ *
+ * Returns non-zero if an erase failure should be emulated, otherwise returns
+ * zero.
+ */
+static inline int ubi_dbg_is_erase_failure(void)
+{
+		return !(random32() % 400);
+}
+#else
+#define ubi_dbg_is_erase_failure() 0
+#endif
+
+#endif /* !__UBI_DEBUG_H__ */

drivers/mtd/ubi/gluebi.c

+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий Артём), Joern Engel
+ */
+
+/*
+ * This file includes implementation of fake MTD devices for each UBI volume.
+ * This sounds strange, but it is in fact quite useful to make MTD-oriented
+ * software (including all the legacy software) to work on top of UBI.
+ *
+ * Gluebi emulates MTD devices of "MTD_UBIVOLUME" type. Their minimal I/O unit
+ * size (mtd->writesize) is equivalent to the UBI minimal I/O unit. The
+ * eraseblock size is equivalent to the logical eraseblock size of the volume.
+ */
+
+#include <asm/div64.h>
+#include "ubi.h"
+
+/**
+ * gluebi_get_device - get MTD device reference.
+ * @mtd: the MTD device description object
+ *
+ * This function is called every time the MTD device is being opened and
+ * implements the MTD get_device() operation. Returns zero in case of success
+ * and a negative error code in case of failure.
+ */
+static int gluebi_get_device(struct mtd_info *mtd)
+{
+	struct ubi_volume *vol;
+
+	vol = container_of(mtd, struct ubi_volume, gluebi_mtd);
+
+	/*
+	 * We do not introduce locks for gluebi reference count because the
+	 * get_device()/put_device() calls are already serialized at MTD.
+	 */
+	if (vol->gluebi_refcount > 0) {
+		/*
+		 * The MTD device is already referenced and this is just one
+		 * more reference. MTD allows many users to open the same
+		 * volume simultaneously and do not distinguish between
+		 * readers/writers/exclusive openers as UBI does. So we do not
+		 * open the UBI volume again - just increase the reference
+		 * counter and return.
+		 */
+		vol->gluebi_refcount += 1;
+		return 0;
+	}
+
+	/*
+	 * This is the first reference to this UBI volume via the MTD device
+	 * interface. Open the corresponding volume in read-write mode.
+	 */
+	vol->gluebi_desc = ubi_open_volume(vol->ubi->ubi_num, vol->vol_id,
+					   UBI_READWRITE);
+	if (IS_ERR(vol->gluebi_desc))
+		return PTR_ERR(vol->gluebi_desc);
+	vol->gluebi_refcount += 1;
+	return 0;
+}
+
+/**
+ * gluebi_put_device - put MTD device reference.
+ * @mtd: the MTD device description object
+ *
+ * This function is called every time the MTD device is being put. Returns
+ * zero in case of success and a negative error code in case of failure.
+ */
+static void gluebi_put_device(struct mtd_info *mtd)
+{
+	struct ubi_volume *vol;
+
+	vol = container_of(mtd, struct ubi_volume, gluebi_mtd);
+	vol->gluebi_refcount -= 1;
+	ubi_assert(vol->gluebi_refcount >= 0);
+	if (vol->gluebi_refcount == 0)
+		ubi_close_volume(vol->gluebi_desc);
+}
+
+/**
+ * gluebi_read - read operation of emulated MTD devices.
+ * @mtd: MTD device description object
+ * @from: absolute offset from where to read
+ * @len: how many bytes to read
+ * @retlen: count of read bytes is returned here
+ * @buf: buffer to store the read data
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len,
+		       size_t *retlen, unsigned char *buf)
+{
+	int err = 0, lnum, offs, total_read;
+	struct ubi_volume *vol;
+	struct ubi_device *ubi;
+	uint64_t tmp = from;
+
+	dbg_msg("read %zd bytes from offset %lld", len, from);
+
+	if (len < 0 || from < 0 || from + len > mtd->size)
+		return -EINVAL;
+
+	vol = container_of(mtd, struct ubi_volume, gluebi_mtd);
+	ubi = vol->ubi;
+
+	offs = do_div(tmp, mtd->erasesize);
+	lnum = tmp;
+
+	total_read = len;
+	while (total_read) {
+		size_t to_read = mtd->erasesize - offs;
+
+		if (to_read > total_read)
+			to_read = total_read;
+
+		err = ubi_eba_read_leb(ubi, vol->vol_id, lnum, buf, offs,
+				       to_read, 0);
+		if (err)
+			break;
+
+		lnum += 1;
+		offs = 0;
+		total_read -= to_read;
+		buf += to_read;
+	}
+
+	*retlen = len - total_read;
+	return err;
+}
+
+/**
+ * gluebi_write - write operation of emulated MTD devices.
+ * @mtd: MTD device description object
+ * @to: absolute offset where to write
+ * @len: how many bytes to write
+ * @retlen: count of written bytes is returned here
+ * @buf: buffer with data to write
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len,
+		       size_t *retlen, const u_char *buf)
+{
+	int err = 0, lnum, offs, total_written;
+	struct ubi_volume *vol;
+	struct ubi_device *ubi;
+	uint64_t tmp = to;
+
+	dbg_msg("write %zd bytes to offset %lld", len, to);
+
+	if (len < 0 || to < 0 || len + to > mtd->size)
+		return -EINVAL;
+
+	vol = container_of(mtd, struct ubi_volume, gluebi_mtd);
+	ubi = vol->ubi;
+
+	if (ubi->ro_mode)
+		return -EROFS;
+
+	offs = do_div(tmp, mtd->erasesize);
+	lnum = tmp;
+
+	if (len % mtd->writesize || offs % mtd->writesize)
+		return -EINVAL;
+
+	total_written = len;
+	while (total_written) {
+		size_t to_write = mtd->erasesize - offs;
+
+		if (to_write > total_written)
+			to_write = total_written;
+
+		err = ubi_eba_write_leb(ubi, vol->vol_id, lnum, buf, offs,
+					to_write, UBI_UNKNOWN);
+		if (err)
+			break;
+
+		lnum += 1;
+		offs = 0;
+		total_written -= to_write;
+		buf += to_write;
+	}
+
+	*retlen = len - total_written;
+	return err;
+}
+
+/**
+ * gluebi_erase - erase operation of emulated MTD devices.
+ * @mtd: the MTD device description object
+ * @instr: the erase operation description
+ *
+ * This function calls the erase callback when finishes. Returns zero in case
+ * of success and a negative error code in case of failure.
+ */
+static int gluebi_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	int err, i, lnum, count;
+	struct ubi_volume *vol;
+	struct ubi_device *ubi;
+
+	dbg_msg("erase %u bytes at offset %u", instr->len, instr->addr);
+
+	if (instr->addr < 0 || instr->addr > mtd->size - mtd->erasesize)
+		return -EINVAL;
+
+	if (instr->len < 0 || instr->addr + instr->len > mtd->size)
+		return -EINVAL;
+
+	if (instr->addr % mtd->writesize || instr->len % mtd->writesize)
+		return -EINVAL;
+
+	lnum = instr->addr / mtd->erasesize;
+	count = instr->len / mtd->erasesize;
+
+	vol = container_of(mtd, struct ubi_volume, gluebi_mtd);
+	ubi = vol->ubi;
+
+	if (ubi->ro_mode)
+		return -EROFS;
+
+	for (i = 0; i < count; i++) {
+		err = ubi_eba_unmap_leb(ubi, vol->vol_id, lnum + i);
+		if (err)
+			goto out_err;
+	}
+
+	/*
+	 * MTD erase operations are synchronous, so we have to make sure the
+	 * physical eraseblock is wiped out.
+	 */
+	err = ubi_wl_flush(ubi);
+	if (err)
+		goto out_err;
+
+        instr->state = MTD_ERASE_DONE;
+        mtd_erase_callback(instr);
+	return 0;
+
+out_err:
+	instr->state = MTD_ERASE_FAILED;
+	instr->fail_addr = lnum * mtd->erasesize;
+	return err;
+}
+
+/**
+ * ubi_create_gluebi - initialize gluebi for an UBI volume.
+ * @ubi: UBI device description object
+ * @vol: volume description object
+ *
+ * This function is called when an UBI volume is created in order to create
+ * corresponding fake MTD device. Returns zero in case of success and a
+ * negative error code in case of failure.
+ */
+int ubi_create_gluebi(struct ubi_device *ubi, struct ubi_volume *vol)
+{
+	struct mtd_info *mtd = &vol->gluebi_mtd;
+
+	mtd->name = kmemdup(vol->name, vol->name_len + 1, GFP_KERNEL);
+	if (!mtd->name)
+		return -ENOMEM;
+
+	mtd->type = MTD_UBIVOLUME;
+	if (!ubi->ro_mode)
+		mtd->flags = MTD_WRITEABLE;
+	mtd->writesize  = ubi->min_io_size;
+	mtd->owner      = THIS_MODULE;
+	mtd->size       = vol->usable_leb_size * vol->reserved_pebs;
+	mtd->erasesize  = vol->usable_leb_size;
+	mtd->read       = gluebi_read;
+	mtd->write      = gluebi_write;
+	mtd->erase      = gluebi_erase;
+	mtd->get_device = gluebi_get_device;
+	mtd->put_device = gluebi_put_device;
+
+	if (add_mtd_device(mtd)) {
+		ubi_err("cannot not add MTD device\n");
+		kfree(mtd->name);
+		return -ENFILE;
+	}
+
+	dbg_msg("added mtd%d (\"%s\"), size %u, EB size %u",
+		mtd->index, mtd->name, mtd->size, mtd->erasesize);
+	return 0;
+}
+
+/**
+ * ubi_destroy_gluebi - close gluebi for an UBI volume.
+ * @vol: volume description object
+ *
+ * This function is called when an UBI volume is removed in order to remove
+ * corresponding fake MTD device. Returns zero in case of success and a
+ * negative error code in case of failure.
+ */
+int ubi_destroy_gluebi(struct ubi_volume *vol)
+{
+	int err;
+	struct mtd_info *mtd = &vol->gluebi_mtd;
+
+	dbg_msg("remove mtd%d", mtd->index);
+	err = del_mtd_device(mtd);
+	if (err)
+		return err;
+	kfree(mtd->name);
+	return 0;
+}

fs/jffs2/fs.c

@@ -672,6 +672,13 @@ static int jffs2_flash_setup(struct jffs2_sb_info *c) {
 			return ret;
 	}
 
+	/* and an UBI volume */
+	if (jffs2_ubivol(c)) {
+		ret = jffs2_ubivol_setup(c);
+		if (ret)
+			return ret;
+	}
+
 	return ret;
 }
 
@@ -690,4 +697,9 @@ void jffs2_flash_cleanup(struct jffs2_sb_info *c) {
 	if (jffs2_nor_wbuf_flash(c)) {
 		jffs2_nor_wbuf_flash_cleanup(c);
 	}
+
+	/* and an UBI volume */
+	if (jffs2_ubivol(c)) {
+		jffs2_ubivol_cleanup(c);
+	}
 }

include/mtd/Kbuild

@@ -3,3 +3,5 @@ header-y += jffs2-user.h
 header-y += mtd-abi.h
 header-y += mtd-user.h
 header-y += nftl-user.h
+header-y += ubi-header.h
+header-y += ubi-user.h