The USB_DEVICE_INTERFACE_NUMBER matching macro assumes that
the { vendorid, productid, interfacenumber } set uniquely
identifies one specific function.  This has proven to fail
for some configurable devices. One example is the Quectel
EM06/EP06 where the same interface number can be either
QMI or MBIM, without the device ID changing either.

Fix by requiring the vendor-specific class for interface number
based matching.  Functions of other classes can and should use
class based matching instead.

Fixes: 03304bcb ("net: qmi_wwan: use fixed interface number matching")
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow some non-cached routes to use non-expired fnhe:

1. ip_del_fnhe: moved above and now called by find_exception.
The 4.5+ commit deed49df expires fnhe only when caching
routes. Change that to:

1.1. use fnhe for non-cached local output routes, with the help
from (2)

1.2. allow __mkroute_input to detect expired fnhe (outdated
fnhe_gw, for example) when do_cache is false, eg. when itag!=0
for unicast destinations.

2. __mkroute_output: keep fi to allow local routes with orig_oif != 0
to use fnhe info even when the new route will not be cached into fnhe.
After commit 839da4d9 ("net: ipv4: set orig_oif based on fib
result for local traffic") it means all local routes will be affected
because they are not cached. This change is used to solve a PMTU
problem with IPVS (and probably Netfilter DNAT) setups that redirect
local clients from target local IP (local route to Virtual IP)
to new remote IP target, eg. IPVS TUN real server. Loopback has
64K MTU and we need to create fnhe on the local route that will
keep the reduced PMTU for the Virtual IP. Without this change
fnhe_pmtu is updated from ICMP but never exposed to non-cached
local routes. This includes routes with flowi4_oif!=0 for 4.6+ and
with flowi4_oif=any for 4.14+).

3. update_or_create_fnhe: make sure fnhe_expires is not 0 for
new entries

Fixes: 839da4d9 ("net: ipv4: set orig_oif based on fib result for local traffic")
Fixes: d6d5e999 ("route: do not cache fib route info on local routes with oif")
Fixes: deed49df ("route: check and remove route cache when we get route")
Cc: David Ahern <dsahern@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2018-05-03

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Several BPF sockmap fixes mostly related to bugs in error path
   handling, that is, a bug in updating the scatterlist length /
   offset accounting, a missing sk_mem_uncharge() in redirect
   error handling, and a bug where the outstanding bytes counter
   sg_size was not zeroed, from John.

2) Fix two memory leaks in the x86-64 BPF JIT, one in an error
   path where we still don't converge after image was allocated
   and another one where BPF calls are used and JIT passes don't
   converge, from Daniel.

3) Minor fix in BPF selftests where in test_stacktrace_build_id()
   we drop useless args in urandom_read and we need to add a missing
   newline in a CHECK() error message, from Song.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

John Fastabend says:

====================
When I added the test_sockmap to selftests I mistakenly changed the
test logic a bit. The result of this was on redirect cases we ended up
choosing the wrong sock from the BPF program and ended up sending to a
socket that had no receive handler. The result was the actual receive
handler, running on a different socket, is timing out and closing the
socket. This results in errors (-EPIPE to be specific) on the sending
side. Typically happening if the sender does not complete the send
before the receive side times out. So depending on timing and the size
of the send we may get errors. This exposed some bugs in the sockmap
error path handling.

This series fixes the errors. The primary issue is we did not do proper
memory accounting in these cases which resulted in missing a
sk_mem_uncharge(). This happened in the redirect path and in one case
on the normal send path. See the three patches for the details.

The other take-away from this is we need to fix the test_sockmap and
also add more negative test cases. That will happen in bpf-next.

Finally, I tested this using the existing test_sockmap program, the
older sockmap sample test script, and a few real use cases with
Cilium. All of these seem to be in working correctly.

v2: fix compiler warning, drop iterator variable 'i' that is no longer
    used in patch 3.
====================
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

When a redirect failure happens we release the buffers in-flight
without calling a sk_mem_uncharge(), the uncharge is called before
dropping the sock lock for the redirecte, however we missed updating
the ring start index. When no apply actions are in progress this
is OK because we uncharge the entire buffer before the redirect.
But, when we have apply logic running its possible that only a
portion of the buffer is being redirected. In this case we only
do memory accounting for the buffer slice being redirected and
expect to be able to loop over the BPF program again and/or if
a sock is closed uncharge the memory at sock destruct time.

With an invalid start index however the program logic looks at
the start pointer index, checks the length, and when seeing the
length is zero (from the initial release and failure to update
the pointer) aborts without uncharging/releasing the remaining
memory.

The fix for this is simply to update the start index. To avoid
fixing this error in two locations we do a small refactor and
remove one case where it is open-coded. Then fix it in the
single function.
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

When an error occurs during a redirect we have two cases that need
to be handled (i) we have a cork'ed buffer (ii) we have a normal
sendmsg buffer.

In the cork'ed buffer case we don't currently support recovering from
errors in a redirect action. So the buffer is released and the error
should _not_ be pushed back to the caller of sendmsg/sendpage. The
rationale here is the user will get an error that relates to old
data that may have been sent by some arbitrary thread on that sock.
Instead we simple consume the data and tell the user that the data
has been consumed. We may add proper error recovery in the future.
However, this patch fixes a bug where the bytes outstanding counter
sg_size was not zeroed. This could result in a case where if the user
has both a cork'ed action and apply action in progress we may
incorrectly call into the BPF program when the user expected an
old verdict to be applied via the apply action. I don't have a use
case where using apply and cork at the same time is valid but we
never explicitly reject it because it should work fine. This patch
ensures the sg_size is zeroed so we don't have this case.

In the normal sendmsg buffer case (no cork data) we also do not
zero sg_size. Again this can confuse the apply logic when the logic
calls into the BPF program when the BPF programmer expected the old
verdict to remain. So ensure we set sg_size to zero here as well. And
additionally to keep the psock state in-sync with the sk_msg_buff
release all the memory as well. Previously we did this before
returning to the user but this left a gap where psock and sk_msg_buff
states were out of sync which seems fragile. No additional overhead
is taken here except for a call to check the length and realize its
already been freed. This is in the error path as well so in my
opinion lets have robust code over optimized error paths.
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

When the call to do_tcp_sendpage() fails to send the complete block
requested we either retry if only a partial send was completed or
abort if we receive a error less than or equal to zero. Before
returning though we must update the scatterlist length/offset to
account for any partial send completed.

Before this patch we did this at the end of the retry loop, but
this was buggy when used while applying a verdict to fewer bytes
than in the scatterlist. When the scatterlist length was being set
we forgot to account for the apply logic reducing the size variable.
So the result was we chopped off some bytes in the scatterlist without
doing proper cleanup on them. This results in a WARNING when the
sock is tore down because the bytes have previously been charged to
the socket but are never uncharged.

The simple fix is to simply do the accounting inside the retry loop
subtracting from the absolute scatterlist values rather than trying
to accumulate the totals and subtract at the end.
Reported-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Normally, a socket can not be freed/reused unless all its TX packets
left qdisc and were TX-completed. However connect(AF_UNSPEC) allows
this to happen.

With commit fc59d5bd ("pkt_sched: fq: clear time_next_packet for
reused flows") we cleared f->time_next_packet but took no special
action if the flow was still in the throttled rb-tree.

Since f->time_next_packet is the key used in the rb-tree searches,
blindly clearing it might break rb-tree integrity. We need to make
sure the flow is no longer in the rb-tree to avoid this problem.

Fixes: fc59d5bd ("pkt_sched: fq: clear time_next_packet for reused flows")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit edd7ceb7 ("ipv6: Allow non-gateway ECMP for
IPv6").

Eric reported a division by zero in rt6_multipath_rebalance() which is
caused by above commit that considers identical local routes to be
siblings. The division by zero happens because a nexthop weight is not
set for local routes.

Revert the commit as it does not fix a bug and has side effects.

To reproduce:

# ip -6 address add 2001:db8::1/64 dev dummy0
# ip -6 address add 2001:db8::1/64 dev dummy1

Fixes: edd7ceb7 ("ipv6: Allow non-gateway ECMP for IPv6")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Reported-by: NEric Dumazet <eric.dumazet@gmail.com>
Tested-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
Fix two memory leaks in x86 JIT. For details, please see
individual patches in this series. Thanks!
====================
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

The JIT logic in jit_subprogs() is as follows: for all subprogs we
allocate a bpf_prog_alloc(), populate it (prog->is_func = 1 here),
and pass it to bpf_int_jit_compile(). If a failure occurred during
JIT and prog->jited is not set, then we bail out from attempting to
JIT the whole program, and punt to the interpreter instead. In case
JITing went successful, we fixup BPF call offsets and do another
pass to bpf_int_jit_compile() (extra_pass is true at that point) to
complete JITing calls. Given that requires to pass JIT context around
addrs and jit_data from x86 JIT are freed in the extra_pass in
bpf_int_jit_compile() when calls are involved (if not, they can
be freed immediately). However, if in the original pass, the JIT
image didn't converge then we leak addrs and jit_data since image
itself is NULL, the prog->is_func is set and extra_pass is false
in that case, meaning both will become unreachable and are never
cleaned up, therefore we need to free as well on !image. Only x64
JIT is affected.

Fixes: 1c2a088a ("bpf: x64: add JIT support for multi-function programs")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

While reviewing x64 JIT code, I noticed that we leak the prior allocated
JIT image in the case where proglen != oldproglen during the JIT passes.
Prior to the commit e0ee9c12 ("x86: bpf_jit: fix two bugs in eBPF JIT
compiler") we would just break out of the loop, and using the image as the
JITed prog since it could only shrink in size anyway. After e0ee9c12,
we would bail out to out_addrs label where we free addrs and jit_data but
not the image coming from bpf_jit_binary_alloc().

Fixes: e0ee9c12 ("x86: bpf_jit: fix two bugs in eBPF JIT compiler")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

The smc_poll code tries to finish connect() if the socket is in
state SMC_INIT and polling of the internal CLC-socket returns with
EPOLLOUT. This makes sense for a select/poll call following a connect
call, but not without preceding connect().
With this patch smc_poll starts connect logic only, if the CLC-socket
is no longer in its initial state TCP_CLOSE.

In addition, a poll error on the internal CLC-socket is always
propagated to the SMC socket.

With this patch the code path mentioned by syzbot
https://syzkaller.appspot.com/bug?extid=03faa2dc16b8b64be396
is no longer possible.
Signed-off-by: NUrsula Braun <ubraun@linux.ibm.com>
Reported-by: syzbot+03faa2dc16b8b64be396@syzkaller.appspotmail.com
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use disable_irq_nosync() instead of disable_irq() as this might be
called in atomic context with netpoll.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When auth is enabled for cookie-ack chunk, in sctp_inq_pop, sctp
processes auth chunk first, then continues to the next chunk in
this packet if chunk_end + chunk_hdr size < skb_tail_pointer().
Otherwise, it will go to the next packet or discard this chunk.

However, it missed the fact that cookie-ack chunk's size is equal
to chunk_hdr size, which couldn't match that check, and thus this
chunk would not get processed.

This patch fixes it by changing the check to chunk_end + chunk_hdr
size <= skb_tail_pointer().

Fixes: 26b87c78 ("net: sctp: fix remote memory pressure from excessive queueing")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When processing a duplicate cookie-echo chunk, for case 'D', sctp will
not process the param from this chunk. It means old asoc has nothing
to be updated, and the new temp asoc doesn't have the complete info.

So there's no reason to use the new asoc when creating the cookie-ack
chunk. Otherwise, like when auth is enabled for cookie-ack, the chunk
can not be set with auth, and it will definitely be dropped by peer.

This issue is there since very beginning, and we fix it by using the
old asoc instead.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When processing a duplicate cookie-echo chunk, for case 'A' and 'B',
after sctp_process_init for the new asoc, if auth is enabled for the
cookie-ack chunk, the active key should also be initialized.

Otherwise, the cookie-ack chunk made later can not be set with auth
shkey properly, and a crash can even be caused by this, as after
Commit 1b1e0bc9 ("sctp: add refcnt support for sh_key"), sctp
needs to hold the shkey when making control chunks.

Fixes: 1b1e0bc9 ("sctp: add refcnt support for sh_key")
Reported-by: NJianwen Ji <jiji@redhat.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously the bbr->idle_restart tracking was zeroing out the
bbr->idle_restart bit upon ACKs that did not SACK or ACK anything,
e.g. receiving incoming data or receiver window updates. In such
situations BBR would forget that this was a restart-from-idle
situation, and if the min_rtt had expired it would unnecessarily enter
PROBE_RTT (even though we were actually restarting from idle but had
merely forgotten that fact).

The fix is simple: we need to remember we are restarting from idle
until we receive a S/ACK for some data (a S/ACK for the first flight
of data we send as we are restarting).

This commit is a stable candidate for kernels back as far as 4.9.

Fixes: 0f8782ea ("tcp_bbr: add BBR congestion control")
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NPriyaranjan Jha <priyarjha@google.com>
Signed-off-by: NYousuk Seung <ysseung@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In dual_mac mode packets arrived on one port should not be forwarded by
switch hw to another port. Only Linux Host can forward packets between
ports. The below test case (reported in [1]) shows that packet arrived on
one port can be leaked to anoter (reproducible with dual port evms):
 - connect port 1 (eth0) to linux Host 0 and run tcpdump or Wireshark
 - connect port 2 (eth1) to linux Host 1 with vlan 1 configured
 - ping <IPx> from Host 1 through vlan 1 interface.
ARP packets will be seen on Host 0.

Issue happens because dual_mac mode is implemnted using two vlans: 1 (Port
1+Port 0) and 2 (Port 2+Port 0), so there are vlan records created for for
each vlan. By default, the ALE will find valid vlan record in its table
when vlan 1 tagged packet arrived on Port 2 and so forwards packet to all
ports which are vlan 1 members (like Port.

To avoid such behaviorr the ALE VLAN ID Ingress Check need to be enabled
for each external CPSW port (ALE_PORTCTLn.VID_INGRESS_CHECK) so ALE will
drop ingress packets if Rx port is not VLAN member.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 93c0d549c4c5a7382ad70de6b86610b7aae57406.

Unfortunately the padding will break 32 bit userspace.
Ouch. Need to add some compat code, revert for now.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Firmware requires that the ttl value for an encapsulating ipv4 tunnel
header be included as an action field. Prior to the support of Geneve
tunnel encap (when ttl set was removed completely), ttl value was
extracted from the tunnel key. However, tests have shown that this can
still produce a ttl of 0.

Fix the issue by setting the namespace default value for each new tunnel.
Follow up patch for net-next will do a full route lookup.

Fixes: 3ca3059d ("nfp: flower: compile Geneve encap actions")
Fixes: b27d6a95 ("nfp: compile flower vxlan tunnel set actions")
Signed-off-by: NJohn Hurley <john.hurley@netronome.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is reported that in some cases, write_space may be called in
do_tcp_sendpages, such that we recursively invoke do_tcp_sendpages again:

[  660.468802]  ? do_tcp_sendpages+0x8d/0x580
[  660.468826]  ? tls_push_sg+0x74/0x130 [tls]
[  660.468852]  ? tls_push_record+0x24a/0x390 [tls]
[  660.468880]  ? tls_write_space+0x6a/0x80 [tls]
...

tls_push_sg already does a loop over all sending sg's, so ignore
any tls_write_space notifications until we are done sending.
We then have to call the previous write_space to wake up
poll() waiters after we are done with the send loop.
Reported-by: NAndre Tomt <andre@tomt.net>
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1. remove useless parameter list to ./urandom_read
2. add missing "\n" to the end of an error message

Fixes: 81f77fd0 ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID")
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

It is valid to have static routes where the nexthop
is an interface not an address such as tunnels.
For IPv4 it was possible to use ECMP on these routes
but not for IPv6.
Signed-off-by: NThomas Winter <Thomas.Winter@alliedtelesis.co.nz>
Cc: David Ahern <dsahern@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In ethtool_get_rxnfc(), the object "info" is firstly copied from
user-space. If the FLOW_RSS flag is set in the member field flow_type of
"info" (and cmd is ETHTOOL_GRXFH), info needs to be copied again from
user-space because FLOW_RSS is newer and has new definition, as mentioned
in the comment. However, given that the user data resides in user-space, a
malicious user can race to change the data after the first copy. By doing
so, the user can inject inconsistent data. For example, in the second
copy, the FLOW_RSS flag could be cleared in the field flow_type of "info".
In the following execution, "info" will be used in the function
ops->get_rxnfc(). Such inconsistent data can potentially lead to unexpected
information leakage since ops->get_rxnfc() will prepare various types of
data according to flow_type, and the prepared data will be eventually
copied to user-space. This inconsistent data may also cause undefined
behaviors based on how ops->get_rxnfc() is implemented.

This patch simply re-verifies the flow_type field of "info" after the
second copy. If the value is not as expected, an error code will be
returned.
Signed-off-by: NWenwen Wang <wang6495@umn.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

trivial fix to spelling mistake in mlx4_warn message.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There's a 32 bit hole just after type. It's best to
give it a name, this way compiler is forced to initialize
it with rest of the structure.
Reported-by: NKevin Easton <kevin@guarana.org>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

syzbot is able to produce a nasty WARN_ON() in tcp_verify_left_out()
with following C-repro :

socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 3
setsockopt(3, SOL_TCP, TCP_REPAIR, [1], 4) = 0
setsockopt(3, SOL_TCP, TCP_REPAIR_QUEUE, [-1], 4) = 0
bind(3, {sa_family=AF_INET, sin_port=htons(20002), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
sendto(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"...,
	1242, MSG_FASTOPEN, {sa_family=AF_INET, sin_port=htons(20002), sin_addr=inet_addr("127.0.0.1")}, 16) = 1242
setsockopt(3, SOL_TCP, TCP_REPAIR_WINDOW, "\4\0\0@+\205\0\0\377\377\0\0\377\377\377\177\0\0\0\0", 20) = 0
writev(3, [{"\270", 1}], 1)             = 1
setsockopt(3, SOL_TCP, TCP_REPAIR_OPTIONS, "\10\0\0\0\0\0\0\0\0\0\0\0|\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 386) = 0
writev(3, [{"\210v\r[\226\320t\231qwQ\204\264l\254\t\1\20\245\214p\350H\223\254;\\\37\345\307p$"..., 3144}], 1) = 3144

The 3rd system call looks odd :
setsockopt(3, SOL_TCP, TCP_REPAIR_QUEUE, [-1], 4) = 0

This patch makes sure bound checking is using an unsigned compare.

Fixes: ee995283 ("tcp: Initial repair mode")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

syzbot/KMSAN reported an uninit-value in ip6_multipath_l3_keys(),
root caused to a bad assumption of ICMP header being already
pulled in skb->head

ip_multipath_l3_keys() does the correct thing, so it is an IPv6 only bug.

BUG: KMSAN: uninit-value in ip6_multipath_l3_keys net/ipv6/route.c:1830 [inline]
BUG: KMSAN: uninit-value in rt6_multipath_hash+0x5c4/0x640 net/ipv6/route.c:1858
CPU: 0 PID: 4507 Comm: syz-executor661 Not tainted 4.16.0+ #87
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:53
 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683
 ip6_multipath_l3_keys net/ipv6/route.c:1830 [inline]
 rt6_multipath_hash+0x5c4/0x640 net/ipv6/route.c:1858
 ip6_route_input+0x65a/0x920 net/ipv6/route.c:1884
 ip6_rcv_finish+0x413/0x6e0 net/ipv6/ip6_input.c:69
 NF_HOOK include/linux/netfilter.h:288 [inline]
 ipv6_rcv+0x1e16/0x2340 net/ipv6/ip6_input.c:208
 __netif_receive_skb_core+0x47df/0x4a90 net/core/dev.c:4562
 __netif_receive_skb net/core/dev.c:4627 [inline]
 netif_receive_skb_internal+0x49d/0x630 net/core/dev.c:4701
 netif_receive_skb+0x230/0x240 net/core/dev.c:4725
 tun_rx_batched drivers/net/tun.c:1555 [inline]
 tun_get_user+0x740f/0x7c60 drivers/net/tun.c:1962
 tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990
 call_write_iter include/linux/fs.h:1782 [inline]
 new_sync_write fs/read_write.c:469 [inline]
 __vfs_write+0x7fb/0x9f0 fs/read_write.c:482
 vfs_write+0x463/0x8d0 fs/read_write.c:544
 SYSC_write+0x172/0x360 fs/read_write.c:589
 SyS_write+0x55/0x80 fs/read_write.c:581
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Fixes: 23aebdac ("ipv6: Compute multipath hash for ICMP errors from offending packet")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Cc: Jakub Sitnicki <jkbs@redhat.com>
Acked-by: NJakub Sitnicki <jkbs@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trivial fix to spelling mistake in tx_fw_stat_gstrings text
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trivial fix to spelling mistake in DP_INFO message text
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trivial fix to spelling mistake in netdev_warn warning message
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we set a bond slave's master to bridge via ioctl, we only check
the IFF_BRIDGE_PORT flag. Although we will find the slave's real master
at netdev_master_upper_dev_link() later, it already does some settings
and allocates some resources. It would be better to return as early
as possible.

v1 -> v2:
use netdev_master_upper_dev_get() instead of netdev_has_any_upper_dev()
to check if we have a master, because not all upper devs are masters,
e.g. vlan device.

Reported-by: syzbot+de73361ee4971b6e6f75@syzkaller.appspotmail.com
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Edward Cree says:

====================
sfc: more ARFS fixes

A couple more bits of breakage in my recent ARFS and async filters work.
Patch #1 in particular fixes a bug that leads to memory trampling and
 consequent crashes.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Owing to a missing conditional, the result of rps_may_expire_flow() was
 being ignored and filters were being removed even if we'd decided not to
 expire them.

Fixes: f8d62037 ("sfc: ARFS filter IDs")
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

efx->type->filter_insert() returns an ID rather than the index that
 efx->type->filter_async_insert() used to, which causes it to exceed
 efx->type->max_rx_ip_filters on some EF10 configurations, leading to out-
 of-bounds array writes.
So, in efx_filter_rfs_work(), convert this back into an index (which is
 what the remove call in the expiry path expects, anyway).

Fixes: 3af0f342 ("sfc: replace asynchronous filter operations")
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For the x32 ABI, struct timeval has two 64-bit fields. However
the kernel currently interprets the user-space values used for
the SO_RCVTIMEO and SO_SNDTIMEO socket options as having a pair
of 32-bit fields.

When the seconds portion of the requested timeout is less than 2**32,
the seconds portion of the effective timeout is correct but the
microseconds portion is zero.  When the seconds portion of the
requested timeout is zero and the microseconds portion is non-zero,
the kernel interprets the timeout as zero (never timeout).

Fix by using 64-bit time for SO_RCVTIMEO/SO_SNDTIMEO as required
for the ABI.

The code included below demonstrates the problem.

Results before patch:
    $ gcc -m64 -Wall -O2 -o socktmo socktmo.c && ./socktmo
    recv time: 2.008181 seconds
    send time: 2.015985 seconds

    $ gcc -m32 -Wall -O2 -o socktmo socktmo.c && ./socktmo
    recv time: 2.016763 seconds
    send time: 2.016062 seconds

    $ gcc -mx32 -Wall -O2 -o socktmo socktmo.c && ./socktmo
    recv time: 1.007239 seconds
    send time: 1.023890 seconds

Results after patch:
    $ gcc -m64 -O2 -Wall -o socktmo socktmo.c && ./socktmo
    recv time: 2.010062 seconds
    send time: 2.015836 seconds

    $ gcc -m32 -O2 -Wall -o socktmo socktmo.c && ./socktmo
    recv time: 2.013974 seconds
    send time: 2.015981 seconds

    $ gcc -mx32 -O2 -Wall -o socktmo socktmo.c && ./socktmo
    recv time: 2.030257 seconds
    send time: 2.013383 seconds

 #include <stdio.h>
 #include <stdlib.h>
 #include <sys/socket.h>
 #include <sys/types.h>
 #include <sys/time.h>

 void checkrc(char *str, int rc)
 {
         if (rc >= 0)
                 return;

         perror(str);
         exit(1);
 }

 static char buf[1024];
 int main(int argc, char **argv)
 {
         int rc;
         int socks[2];
         struct timeval tv;
         struct timeval start, end, delta;

         rc = socketpair(AF_UNIX, SOCK_STREAM, 0, socks);
         checkrc("socketpair", rc);

         /* set timeout to 1.999999 seconds */
         tv.tv_sec = 1;
         tv.tv_usec = 999999;
         rc = setsockopt(socks[0], SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof tv);
         rc = setsockopt(socks[0], SOL_SOCKET, SO_SNDTIMEO, &tv, sizeof tv);
         checkrc("setsockopt", rc);

         /* measure actual receive timeout */
         gettimeofday(&start, NULL);
         rc = recv(socks[0], buf, sizeof buf, 0);
         gettimeofday(&end, NULL);
         timersub(&end, &start, &delta);

         printf("recv time: %ld.%06ld seconds\n",
                (long)delta.tv_sec, (long)delta.tv_usec);

         /* fill send buffer */
         do {
                 rc = send(socks[0], buf, sizeof buf, 0);
         } while (rc > 0);

         /* measure actual send timeout */
         gettimeofday(&start, NULL);
         rc = send(socks[0], buf, sizeof buf, 0);
         gettimeofday(&end, NULL);
         timersub(&end, &start, &delta);

         printf("send time: %ld.%06ld seconds\n",
                (long)delta.tv_sec, (long)delta.tv_usec);
         exit(0);
 }

Fixes: 515c7af8 ("x32: Use compat shims for {g,s}etsockopt")
Reported-by: NGopal RajagopalSai <gopalsr83@gmail.com>
Signed-off-by: NLance Richardson <lance.richardson.net@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

"./scripts/get_maintainer.pl -f" does not actually show us David as the
maintainer of drivers/net directories such as team, bonding, phy or dsa.
Adding him in an M: entry of NETWORKING DRIVERS fixes this.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2018-04-26

This pull request includes fixes for mlx5 core and netdev driver.

Please pull and let me know if there's any problems.

For -stable v4.12
    net/mlx5e: TX, Use correct counter in dma_map error flow
For -stable v4.13
    net/mlx5: Avoid cleaning flow steering table twice during error flow
For -stable v4.14
    net/mlx5e: Allow offloading ipv4 header re-write for icmp
For -stable v4.15
    net/mlx5e: DCBNL fix min inline header size for dscp
For -stable v4.16
    net/mlx5: Fix mlx5_get_vector_affinity function
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>